XW 6200 cooling

Similar Questions

• HP pavilion 550-500na: HP pavilion 550-500na cooling

  OK after doing some research, I think about upgrading my Pavilion for a GTX 970 ITX nvidia graphics card

  with a privateer RM650 RM PSU, but my main concern is most of the cooling time, I already made the mistake of trying to fit a 970 GTX full size on this case, and it did not fit xD

  But seeing that the ITX model is more than half of the full size one is a little more of 17cm in length and 13cms width its got enough space but:

  I don't know if my case is positive or negative air pressure and that its cooling would be sufficient for the PSU and itx gtx 970

  so the baseline is: what is the air pressure from my case and cooling would be sufficient?

  any help would be apprieciated thx in advance

  My PC: https://h20564.www2.hp.com/hpsc/doc/public/display?docId=c04556684

  Power supply: http://www.corsair.com/en-gb/rm-series-rm650-80-plus-gold-certified-power-supply

  ITX GTX 970: http://www.amazon.co.uk/Gigabyte-1076MHz-Dl-Dvi-I-Dl-Dvi-D-Graphics/dp/B00P7337YG

  -> > > link to itx 970 alt: http://www.gigabyte.eu/products/product-page.aspx?pid=5252#ov

  again help is appreciated most thx in advance

  "btw nice of air from the fan/modulator, but I don't think that made above GTX 970 itx in my current case, space would be very tight with the new power supply if I did."

  I understand what you mean about space.  The only reason that I was showing you the 6200 case was because the processor is in a different place on the motherboard and the PCI-e slot too.  I don't think you can work with your current setup very well really, but I can understand why you want the cooling capacity more.

  You mention that with your new power supply, wouldn't you have so much space (sorry if you meant something else), but it should be the same size than what you have now dimension-wise.  In addition, set the fan in the power supply should not be a problem at all.  That said, you're going to have the same configuration of motheboard even if you're 100% to get a new case, so all moves will be the same.  Because it is true, perhaps that the PCI corsair fan could be part of your cooling solution.

  One thing to note is the orientation of your motherboard in individual cases.  Some cases are mounting right to motherboard and some are left.  Your case is a montage of the left side.  Most of the new PC games seems to be mount on the right side.  It makes a difference in the direction of that graphic card fan will point.  NOW stop and think what I want power supply high or low POWER supply?  In the reverse case, now that your graphics card will point down (right side of mounting of the motherboard), a bottom mounted PSU will mean PSU below the graphics card instead of exhaust fan.  So, if you find a case that is top of the power supply and then exhaust under the graphics card fan, seems to graphics go quickly.  On the other hand your processor is stuck up above the graphics card in a dead spot.  For sure, I guess you should go with low POWER supply as in the case of the Corsair.  Anyway, hot air rises, so it's best to have the high fan.

  You have a weird dead task below your graphics (above the graphics card in your current case), where is the best you can do to remove covers (brides) PCI slot.  Anyway, even in a new case, I kind of fan slot an it.  It would still be between the graphics card and PSU, but this would actually serve to protect the power supply of warm air to the graphics card to a degree.  Just something to think about this.

  These cases are very sharp.  I like a lot, even if they are quite expensive.  But you get what you pay for and all that.

• HP Pavilion dv6-6c10us Enterta: fan cooler replacement HP Pavilion dv6-6c10us Entertainment Notebook PC

  I NEED TO KNOW THE NUMBER OF RIGHT FOR THE COOLER FAN. I GET AN ERROR WHEN STARTING THE LAPTOP.

  HP Pavilion dv6-6c10us notebook PC
  Model #: A6Y49UA
  Product number: A6Y49UA #ABA

  Thanks in advance.

  Your Service Manual:

  Manual

  For use only with the computer models equipped with an AMD processor and a graphics subsystem with memory UMA 665277-001

  http://www.Amazon.com/Eathtek-dv6t-6000-dv6t-6100-dv6z-6100-dv6t-6200/DP/B0086SXKKU/ref=sr_1_2?ie=UTF8&QID=1462966717&SR=8-2&keywords=665277-001

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• [Power Mac G5] Type of liquid cooling system?

  Y at - it anyway how to determine type of LCS just by looking at the case?

  We have old school Power Mac G5 DP 2, 7GHz (early 2005) we use for editing (well, for the last two years, he's right there and no one wants to touch this old piece of...). They will throw him in the year, and since I was take care of him for a while, I thought I'd take home when they do and use it as a backup machine for the data of my and my wife. I would like the max memory, put a few large hard drives (and small SSD, but there seems to be a lot of problems with this) and run the Linux command (more problems).

  But first, I have to clean the machine and look at the State of it. What particularly concerns me is the LCS (DP 2, 7GHz I) - these things have been prone to leaks and what I found there are at least three revisions of the LCS - second of them made by Panasonic seems to be the most reliable. I can't look inside, deeply, because it must be ready to use at least for another 3-4 months, I can do is to open the case and remove the front fan and look outside the heater.

  So this brings me to my question: Y at - it anyway to determine the type of LCS just by looking at the case?

  Thank you...

  Apparently, there were two models more prone to leaks than others, although still very rare. See this http://www.everymac.com/systems/apple/powermac_g5/faq/powermac-g5-liquid-cooling-infos-fuites-issues.html

  The damage inflicted by a system of flight are very serious, and it is almost impossible to hide or completely clean. As soon as you open the side panel on the Power Mac, you will easily be able to tell if this unit experianced a problem.

• The Iphone needs to cool down before using the flash

  Hello

  I see the message on my Iphone 5 s(IOS10-Updadte) camera-"The Iphone needs to cool down before using the flash"

  Please help me solve the problem.

  Hi sangani53,

  Thank you for using communities Support from Apple!

  This message indicating that your iPhone must cool before using the flash indicates that the temperature of your iPhone is passed to where certain features will be disabled.  Once you bring the temperature down, the features should come back.  Take a look at this link for more information on updating your iPhone in the operating temperature.

  Keep the iPhone, iPad and iPod touch in acceptable operating temperatures

  Take care.

• Is 6200 RPM under normal conditions of Macbook Pro?

  Hi all

  Greetings for the day...

  Normally, I do not play games and it was the first time, I downloaded Dirt 3 on my MacBook Pro model no of retina and noticed that during the game, temp has risen about 75 and the fan speed was so fast it was audible. As I SCM fan control, I just checked my fan speed, he looked at 6200 rpm, is - it normal like playing games or is there any concern that I need to worry?

  Thanks for your help... Bravo!

  Games often is resources intensive applications and will focus on the CPU/GPU to create heat.  What you are experiencing seems to be normal.  Fans will accelerate in order to dissipate the heat, so the speed of 6200 RPM is not unusual.  temperature of 75 ° c, but on the high side, is well below the limits of functioning "normal" for the resource intensive applications.

  According to the parameters that you said, there is nothing unusual.

  Ciao.

• Cool/yellow tint on iPhone 7 screen

  Everyone has noticed that 7 iPhone screen is actually not as bright as the iPhone 6? What is a defective unit? I thought it was supposed to be 25% more luminous. She seems to have a cooler for her yellow tint when it is next. White is certainly not as bright compared to the 6 s. I turned off brightness auto and them two on high.  Some forums suggested to do a reset of all parameters and that did not help. I am very disappointed of the brightness.

  Hello charef,.

  Thanks for this info and choosing the communities Support from Apple. I know how important by ensuring that your display on your new iPhone 7 works correctly is for you! From what you said, it seems that have enabled, the feature of night shift so I would check on two devices first.

  Adjust the brightness of the screen and the color balance - iPhone user Guide

  Otherwise, if you think that it is a discoloration of the display, I would follow the steps outlined in this article:

  Get help with the screen on your iPhone, iPad or iPod touch

  See you soon!

• Hello! I had the 10 iOS in iPhone is and it's cool! Di you know if I should get in iPhone 5, or it will get stuck? Thank you

  Hello! I had the 10 iOS in iPhone is and it's cool! Di you know if I should get in iPhone 5, or it will get stuck? Thank you

  Since iOS 10 is compatible with the iPhone 5, if you have not limited the space remaining on your device, I would recommend installation. Please note that this update is bricking many iPhones, so make sure you have a full backup of your data before you start the installation.

  Good luck.

• 2015 iMac 5K - investigation of cooling fan

  Hey guys,.

  I just got the iMac end of 2015 5K with i7 Quad-core (skylake), 4.0 GB AMD R9 M395X, 32 GB of RAM, 2 TB Fusion Drive. The cooling fan is very quiet and it's quieter in the way, but when I've rendered from Adobe After Effects or Adobe Premiere fan starts booting (and then turns off once done rendering).

  So, I wondered, - is this normal? It overheats? Contact Apple Support? This hurt the longevity of the iMac?

  Thanks for all your contributions!

  Yes this is normal. The management control of the system is the detection of additional heat to the rendering process load and lifting the fan to avoid overheating.

• can you collect cool previews as an add-on anytime soon?

  I used add on previews cool cooliris for many years and find it off this morning. Is there anyway I can get that add on back?

  This should help you, at least as much as this old extension is not signed. But this isn't a permanent solution. It will not work in the next version of Firefox 44. Cool Previews was abandoned by the crew Cool Iris - so it is dead.

  https://support.Mozilla.org/en-us/KB/add-on-signing-in-Firefox#w_what-can-i-do-if-Firefox-disables-an-installed-unsigned-add-on

  Replace the module signature (advanced users):
  You can override this setting by changing the preference xpinstall.signatures.required to false in the Editor of Configuration of Firefox (topic: config typed in the URL bar). Support is not available for all changes made to the Configuration then editor please do so at your own risk.

  Note: This pref will be gone in Firefox 44 (expected release for 26 Jan 2016) for extensions currently unsigned user should contact the developers of these extensions and their prod in get their act together & get their extensions signed by Mozilla. Otherwise the users of these extensions will be GROUND come out of Firefox 44. Mozilla has already made back the version in which this new security feature should be activated from Firefox 40 to 44. I doubt if there will be a further reprieve.

• Recommended installation for the stability of the regions hot & warm even under Safari until Mac, cooling system is innovated. For a more Durable Mac

  Hello. It is best to combine a stable software (10.11.6 is stable to this day) and a cool hardware, even with Safari (with many tabs). A stable software is not enough, a cooled optimal equipment is also essential; It creates a stable holistic system.

  Until Apple, miniaturize perhaps, a sort of refrigeration in the circuits themselves (coolant will be not compact) due to the warming of the planet (some countries reaching a strong history of 46 to 65 degrees Celsius), cooling fan is not viable because it is so hot that he uses room air, regardless of how fast the fans spin (which would be just like a set of dry hair to the maximum) is not enough. An already hot air will get even hotter once Macs is used for long hours that could damage the GPU in particular, or perhaps even deform boards disconnect some circuits even or deform inside fleas which includes also circuits in them. Heat can also soften the welds in the Mac.

  It is recommended to run fans manually with a fan control application, even if the Mac is new (over the past six years the iMac I have had 2 replacements of GPU - this is most probably because of the heat and lack of ventilation in the Macs.) Apple may have more emphasis on function and either looks-it can't be 50-50. Replacement could cost if not for Apple Care which is good to have), if you are in an area that is warm or hot, at least 2000 rpm which seems to be a good balance between cooling and too much noise (it keeps the GPU minus 70 Celsius, especially). At 2000 rpm, the wear on the fans is not the only striking, it's usually only 47% of the maximum rpm of Apple fans (good fans are usually evaluated during maximum 5 years running 24/7 all year). But the best is to turn off all the gadgets to make noise to make the quiet place and adjust the fans (with a minimum of 2000 RPM) as quickly as possible without being noisy for the user. It is better to add extra cooling in the back (like a small electric fan or fans of cooling for laptops) for maximum stability if you're not in a cold air-conditioned room.

  It is good to reset PRAM then MSC after the fans and password recovery to use disk utility (two types of repair) manually before booting into your main operating system.

  God bless you. Revelation 21:4

  Directly from the plug of the iMac:

  Operating temperature: 50 ° to 95 ° F (10 ° to 35 ° C)

  If you try to work beyond these limits, good luck!

  There's this thing called 'air conditioners' cool the environment.

• The iphone needs to cool down before using the flash? How to fix?

  The iphone needs to cool down before using the flash? How to fix?

  Try to close the application or restart the phone camera. See ol-down-before-you-can-use-the-flash/ http://leimobile.com/ios-4-3-camera-bug-flash-is-disabled-the-iphone-needs-to-co.

  TT2

• Why Mozilla Firefox have lots of cool themes (full), while only some work on my version of Firefox?

  Want just the other themes, the cool ones, please. Is this possible?

  Themes are created by third-party developers 3rd, not by Firefox. Because of the lack of familiarity with the new user interface and a lot of dissatisfaction with the new user interface that allows you to create a complete theme harder many developers have not updated their themes for Firefox 29 and later or have stopped making themes.

• Flash off iphone 5s must cool

  Hi, I use Iphone 5 s with version 9.3.2.

  From two days I can not use the rear camera showing an error like "iphone disabled flash 5s needs to cool down the 5s downflash disabled iphone needs to cool down"

  Please provide your solution on this.

  There is no Flash on iOS devices.

  Please describe where and in what app do you see this message. In the meantime, do not click on the links associated with this message, or dial phone numbers. It's probably a scam.

• How to cool a fanless mini mac?

  Hi people,

  I recently had a problem with my 2007 model Mac Mini where I have to replace my fan because he is no more. I have not enough money even to buy a new fan, so I find a way to cool without the rotation of the fan. Is there a possible way to cool without the rotation of the fan?

  Do not run heavy programs, stick to basic programs (and light) as Safari, iTunes, Pages, or Word. Try to avoid the games and video rendering.

  Be careful because you could damage your Mac Mini to work on it without fan works.

  I highly recommend to get a new fan as soon as POSSIBLE.