XW4400 workstation. with SATA 3 hdd.

Similar Questions

• HP DV6T; compatible with SATA II or SATA III?

  Hello world

  I would like to change the HARD drive in my HP DV6T Select Edition, product # XC102AV that I bought in December 2010 for one SSD, possibly the 840 Samsung EVO (2.5 ", either 250 GB or 500 GB SATA III).

  I was not able to know whether my system is compatible with SATA III.

  Can you please help me, will be the work of Samsung SSD using a SATA II or SATA III speed?

  Thanks for all your help in advance!

  Steve

  thesuperman21 wrote:

  Thank you very much for your answer!  The processor I have is the Intel Core processor i5 - 580 M Dual Core (2.66 GHz, 3 MB L3 Cache) with Turbo boost up to 3.33 GHz.

  Here is the entire system, if it helps at all:

  • • Genuine Windows 7 Home Premium 64-bit
  • • Recovery of the system DVD with Genuine Windows 7 Home Premium 64-bit
  • • Processor Intel Core i5 - 580 M Dual Core (2.66 GHz, 3 MB L3 Cache) with Turbo boost up to 3.33 GHz
  • • 1 GB ATI Mobility Radeon (TM) HD 5650 switchable graphics [HDMI, VGA] - for Dual Core processors
  • • FREE upgrade to 8 GB of memory (2 DIMMs) DDR3 system
  • • 640 GB HDD at 7200 RPM with HP ProtectSmart hard drive Protection
  • • No additional desktop software
  • • No additional security software
  • • 9-cell lithium-ion (size too)
  • • 15.6 "diagonal HD HP Brightview Widescreen (1366 x 768) LED display
  • • Touch screen with intuitive multi-touch applications of the HP TouchSmart (including the HP TrueVision Webcam)
  • • Blu - ray writer & SuperMulti DVD burner
  • • Intel Wireless-N card with Bluetooth
  • Backlit keyboard with fingerprint reader
  • • HP Home & Personal store in box-envelope

  If you don't mind not confirm that it is SATA II for me, I really appreciate it!  Thanks again!

  Steve

  I found a review for this laptop, so I don't know the specs. The first SATA III support for HP laptops are series Dv6-6000, Sandy Bridge, which is the second generation of Intel processors. It starts with Core iX-2XXX. Means that your laptop is certainly a SATA II one. I got it so I know for sure.

• Is it possible to set up workstations with 2 or 3 monitors each in MultiPoint Server 2011?

  Hello everyone!

  I have studied MultiPoint Server documents, but have not found the answer: is it possible to set up workstations with 2 or 3 monitors each in MultiPoint Server 2011? For example I have computer with graphics HD6970 and HD4790 (more HD4290 on board) and to 'split' in several positions - a high performance graphic with 3 monitors and 2 connected to HD6970 or 3 other workstations for internet/treatment of text with each, a lcd panel connected to HD4790 and HD4290 cards. So I could build small desk with a powerful station :).

  In other words, using windows terminology guide, one might wonder it is able to have the teachers with more than one monitor computer, while students have jobs with a monitor?

  (Subsidiary question is: what Eyefinity, is working for MultiPoint - assuming that the station with more than a graphics card?) Can't find any information in the deployment also guide).

  Kind regards

  Maciej

  Please transfer your inquiry in the most appropriate in Forum Windows Multipoint Server.  Thank you!

• HP xw4400 workstation keeps closing

  HP xw4400 workstation keeps closing
  I hadn't used this machine in 3 months, at the beginning, he ran for an hour without problem, after installing the latest updates MS & restart., after only 5 minutes, it keeps turn off, fix Wins7 Startup Repair attempts...

  but after a few minutes continues to stop, I think either mobo or? all ideas

  P.S. this thread was moevd leave workstations - Itanium-Based, hp9000, Visualize for workstations - w series, z series xw and legacy x series. -Hp moderator of the Forum

  If you have installed the latest updates from MS for Windows 7 after August 13, 2013, one or more of these tasks may be responsible for the behavior.

  You will find some explanations in multiple sites, if you Google for "2859537" (the number of the hotfix KB MS failed).

  Such a reference is:

  August 21, 2013

• How to install xp sp3 with sata driver in my P8Z68-V THE?

  Hi my problem is that I want to install windows xp service Pack 3 in my new computer

  my new computer is compatible Windows7 how to install Windows XP on my new computer?
  It's my form of systems
  Motherboard: ASUS P8Z68-V (compatible with windows7)
  PROCESSOR: Intel Core i7-2600 CPU @3. 40 GHz (compatible with windows7)
  MEMORY: 8 GB
  GRAPHICS CARD: MSI AMD Radeon r6770 (compatible with windows7)
  is it posible to install windows xp sp3 on my profile?
  can u show me the steps by steps in the creation of the xp3 with sata controller
  and how to reformat and bios configuration or steps, follow the steps
  from the beginning to the end

  Hello

  You can follow this link & check if the problem persists:

  How to install or upgrade to Windows XP?

  You can also ask your question in the TechNet forum for assistance:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Hope the helps of information.

• Explain to me how a multi-level security strategy can be deployed domain LAN-to-WAN and the LAN domain to the domain of the workstation with the use of internal firewalls.

  Explain to me how a multi-level security strategy can be deployed domain LAN-to-WAN and the LAN domain to the domain of the workstation with the use of internal firewalls.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• I try to download apps from creative cloud on my HP xw8200 workstation with windows XP PRO. A meassage comes up saying that my OS is no longer supported. Where can I download the software compatible for XP?

  I try to download apps from creative cloud on my HP xw8200 workstation with windows XP PRO. A message appears saying that my OS is no longer supported. Where can I download the software compatible for XP?

  Hello

  Creating cloud is no longer compatible with Windows XP.

  Refer to the system for creative cloud and different applications requirements:- system requirements | Cloud Creative

• Mix SAS HDD with SATA SSD's in RAID

  Hello

  On what level is this possible?

  Can I mix SATA and SAS disks on the controller RAID (PERC H710), group or virtual disk level? Server PowerEdge R720.

  I want to be is:

  PERC controller:

  -2 SAS HDD in RAID 1 connectors (for the operating system)

  -2 SATA SSD's in RAID 1 (logs)

  -HARD drive SAS 6 in RAID 10 (to the database)

  Whether in separate RAID groups?

  Can I combine SATA and SAS in a RAID group, virtual disk or only on the level of controller?

  All my drives won't be visible in Windows, if it is SATA or SAS?

  Thank you!

  Vellemannv,

  The configuration of the Perc controller you would be perfect. You can mix SAS and SATA drives on the controller, it can handle both. You have SAS bays and bays this SATA on the same controller. You can NOT have SAS and SATA disks present in the SAME table, however.

  The OS will see the different virtual drives as well.

  Let me know if it helps.

• Performance issue with 2.5 "HDD + NAND MQ01ABD100H

  Hello everyone.

  I use this car for several days.
  The problem is that player has lower estimate in the Windows system assessment tool then my old drive (WD500BEVT).

  I run the benchmark in HDTune Pro and I get very bad result in n of the speed to the beginning of the trial. Overall performance is also much lower then I read in the comments.

  Can you help me with this problem?
  I am running Windows 7 64-bit teacher, all the drivers are installed, my laptop is A.c.e.r 5820TG (i5 - 450 M, 4 GB of DDR3 memory, ATi HD5650). Only a few days ago, is original and SP1.

  Thans for all help.

  I am attaching a link to a screenshot
  http://imagizer.imageshack.us/v2/640x480q90/585/j5nl.PNG

  Hello

  According to the [page specifications MQ01ABDxxxH | http://storage.toshiba.eu/cms/en/hdd/solid_state_hybrid_drives/product_detail.jsp?productid=525], the HYBRID 2.5 INCH SATA DRIVE supports SATA III

  For best performance, your laptop should also supports the SATA III HARD disk controller.
  In the event that your laptop does not support SATA III, performance may be lower due to the limitation of HARD disk controller.

• Lenovo G500 with SSD and HDD in ODD Bay

  Hello!

  So I have a laptop Lenovo G500 aged for 1 year with a processor i5 to 3230M, now an 8 GB (originally, it was 4 GB) of RAM and a 1 TB HARD drive. I recently bought a 250 GB Samsung SSD 840 Evo and a disk HARD caddy from here: http://hddcaddy.com/en/lenovo-ibm-hdd-caddy/646-lenovo-g500-hdd-caddy.html

  So I removed the HARD drive, put the SSD in its place, removed the STRANGE and put the HARD drive in its place. It was all nice and comforting, but that in some points the HARD drive was not seen by the system as if it was disconnected or something. This happens usually when the laptop was running, if I rebooted everything worked. I remember that in the past, I don't know, maybe in the last 4 months, I used my ODD twice and neither time was it works well.

  So my question is: can it be that my ODD SATA port is faulty, or does this problem occur because this whole switch-and-swap operation is not supported by my laptop? If this is the first I can replace this SATA port?

  Hello!

  Thanks for the reply. I just did an update of the bios, so far everything seems to work well, it still took some time (a few hours) unitill the problem occurred.

  If the problem persists I'll try the fix from microsoft that you sent, but with the 2nd solution, there is the problem that I need to reboot the system to get the bios, but so far after a reboot my laptop has always recognized the HARD drive.

• HP probook 4540 s: dual boot 4540 with SSD and HDD

  Hello world

  Recently, I replaced my HDD with a SSD on my HP probook 4540 s

  Using a HARD drive enclosure, I installed the SSD on the slot of the hard drive and the HARD drive on the DVD drive SATA connector

  the two hard drives have win 7 professional 64 bit

  When I turn on the laptop, the OS on the SSD starts and I see the HARD drive as a storage drive

  Thus, from a material point of view, everything works fine

  now, I would like to use two hard drives with the ability to use win 7 times of SSD and HDD

  to boot from the HARD drive, I tried to change the boot order put the DVDrom before the hard drive, but it did not work

  any suggestion\software tool which may help?

  Thank you very much

  Giuseppe

  @Giuseppe1:

  To do this, you must choose a single installation as the default and change the BCD in this one to include starting in the installation of other.

  Installing Win7 on the internal HARD disk is the best choice because he will always be there.

  That change, download and install EasyBCD from Neosmart Technologies.  It is a tool on the menu to change the BCD.  It is safe to download and use, as I use it all the time.

  Once installed, follow these steps:

  (1) run EasyBCD

  2) click on the button Add a new entrance on the left

  (3) in the section on the right operating system, click the Windows tab, and then select the drive that contains the OTHER Windows startup

  4) click the button Add an entry

  Now when you reboot your machine, you should see a menu with two entries - one for each version of the windows OS.

  Good luck

  ========================================================================
  If you feel that my suggestions helped you, please click on the Thumbs-Up symbol; If they helped to solve your problem, please click "accept as a Solution.

  I'm a volunteer and I do not work for, or represent, HP.

• Install Windows 7 on HP xw4400 workstation

  I have a xw4400 running Windows XP Professional. I'm looking for info on installing Windows 7 on my computer. My intention is to replace the 80 GB SATA with a 500 GB SATA and then install, not upgrade to Windows 7.

  Boot from the Windows 7 DVD

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Crash of MacBook, iMac with SATA-USB cable files

  Hello.

  My Macbook (2006) took a nose dive after a very solid 10 years of use. He has been blocked on the gray screen with the Apple logo and the spinning equipment. Forever. Would not boot mode safe mode or Recovery Mode. I accepted this.

  I'm currently trying join my school for the HARD of MB my iMac disk files. I removed the drive HARD internal of the MB. I have a SATA cable / USB. I plugged the cable on my iMac and initially nothing was recognized even if I could hear the disk rotation. After about 2-3 minutes I got a message telling me the disc HARD cannot be repaired, but I could always transfer files. Great! That's all I wanted to do. Well, the HARD drive appeared in the Finder and I tried to navigate to find important files I got a message telling me that the HARD drive has been expelled irregularly. So I disconnect it, plug it in. Another few minutes and I get the same message (cannot be repaired), but this time I have no HARD drive in the Finder. I tried to run first aid at the disk in disk utility, without success. Now I can't even pop-up in the Finder or disk utility when I plug. I can hear it running, but nothing happens, and then I get a message "disc not eject properly.

  My question is this: How can I get information from this my iMac HARD drive? Is there anything else I need to do? All I want to do is pull my notes of the current semester. Nothing else on this HARD drive as it was basically just a web browser/treatment for the past year.

  FWIW: I think I was running Lion as an operating system on the laptop that I couldn't progresses from here with updates. I'm under El Capitan on my iMac.

  Even if you already shot the player, have you considered using Disk Mode target instead?

  Target disk mode, indeed, turns your Mac into a 'external drive '. In this mode, you can connect your defective Mac to Mac via FireWire or Thunderbolt and see the contents of the disc of the CMA on your Mac, as if the drive was an external drive. This not only allows you to easily access the data on the hard drive of the Mac, it also allows you to use the material of a Mac to boot another Mac operating system and data.

  To access the target disk Mode, reboot your Mac and hold down the T key as soon as you hear the startup chime. Keep now until you see a FireWire logo or white Thunderbolt appear on the screen (depending on the hardware capabilities of your Mac). Now, you can directly connect your Mac to Mac defective with the appropriate cable and access the drive of this Mac. When you are done, unmount the drive of the defective Mac from your Mac running OS X, then press on and hold the power button / stop the Mac defective until the system turns off.

• How to sync iTunes with iTunes ext HDD iMac?

  Hello

  I can't afford to buy the 256 GB MacBook Air, then I'm the one with only 128 GB.

  When I launched my iTunes, I pressed down option and select the external HARD disk where I put all the songs.

  Songs in iTunes external HDD has been copied from my iTunes on my iMac.

  So, how can I synchronize my iTunes in my iMac with the iTunes on my external HARD drive?

  Thank you

  What do you mean "iTunes sync in my Mac?"  You say that you no longer use the library in your computer (iTunes' incidentally is the only application), what is there to sync (and once again 'sync' has a very specific meaning of transferring the elements to and from a mobile device)?

• With cable of HDD to SSD Macbook Pro mid-2012

  I've recently upgraded to SSD (Samsung Evo 850) of the HARD drive on my Macbook pro mid-2012. However, the installation of the SSD has been very painful. I tried to use in recovery mode disk utility, several times but it fails to remove or mount the SSD drive. I thought it was the faulty SSD. Then I hung the SSDS via a USB port and proceeded to install OS X on it (using my HARD drive). The SSDS works very well with the USB key, so I put it in and hooked up with the flex cable that was previously used for my HARD drive. However, this does not work, the operating system sees that there is a reader hooked, sees the name, size and etc, but does not charge, gives me the sign of question mark folder, which means there is no hanging drive. So I think it's something with the HARD drive, SATA cable. But the cable works perfectly when used with the HARD disk. So I was wondering if the HARD drive cable that comes with Macbook Pro mid-2012 is compatible with the SSD. I watched several videos of people the SSD HARD drive upgrade, but they all seem to be using the same cable. Any ideas what could be the problem or if I need a different type of cable? Thank you.

  Try this it worked for another user having the same problems.

  Your MacBook is looking for initial start-up by car but can not find.

  Power on the Mac and hold down the 'option' at the same time, and then manually select to boot from the drive of choice.

  Also, try this first:

  SMC and the PRAM Reset

  I have a MBP mid-2012 13 inches and I did an upgrade SSD with a Samsung Evo 850-series (500 GB.). However, I had no problem.

  I used Carbon Copy Cloner to clone the original disc for the SSD via a USB-to-Sata adapter.

  My first start was slow because I don't have the SMC / PRAM reset my MBP was looking for startup disk.

  However after my MBP starts very quickly. I got no problem with Samsung Evo SSD. They work very well with Macs.

  Don't forget to activate the "pad" your non - owc SSD support.

  Open "terminal app" and enter the command 'sudo trimforce activate' select YES, YES... and restart after completing

  http://www.Macworld.com/article/2881177/how-to-reset-your-Macs-NVRAM-pram-and-SM c.html