XY Chart with start value

Similar Questions

• Chart with graphic behavior

  I would ask for advice about how to best manage the following scenario:

  I often update a XY Chart, with 12 curves. I created a Subvi ActionEngine which acts as a buffer (add points, read out data) of the graph, and has a few other actions, like emptying the buffer, decimating the data points, etc. So at 1 Hz rate I send data to this XYGraph 12 curves, and it will redraw, everything is OK.

  There are 12 permanent tasks of data acquisition, with a frequency of 1 Hz, I want to show the user how to change the curves. It is also important to have a line of vertical slider so that the user can examine the values to different timestamps (X - values are absolute timestamps). Everything works fine, except that when I turn off the X-autoscale, if the user cannot see lets say the last hour of data points (3600 X 12 points curves, I know I should decimate usually, but LabView usually completely manipulates the situation OK when you have several points and pixels... at least then I can live with that).

  So the problem: If X autoscale is disabled and I have send new data to the chart sets every second, the chart does not display the points on the right side, as in the case of a graph. Shell how I make the chart handle this situation? Shell, I put the 'max' (X-scale - range - Maximum property) of the scale-x via property nodes every second? Is this OK to do? Any other idea?

  A kind of workaround would be to use a chart XY-Graph. The user could inspect lets say later 1 hour of data with the table (or disable autoscale, the last minutes if necessary) and the XY-Graph would work as an overview, the user can manually update by a button and after the game with the zoom features, etc...

  What do you think? How do you manage such a request for data acquisition? If the user needs to see what is happening recently with curves (pressure, flow rates, temperatures), but also be able to examine the evolution of the curves of the last 24 hours...

  Edit: hmm, usually I get new ideas after writing my problem I think I try to attack the problem from the wrong side: instead of fighting with the properties of the graph, I could just create a 'Set Range' action in my Subvi buffer, so when the user wants to see lets say that the last 10 minutes of data , I only send these data to the Subvi points to the curve... hmm I think this would be a more pleasant solution... What do you think?

  Here are a few options. You may want to consider depending on your actual application:

  1. A graph-based mouse event opens a new VI, where you put all the data that you want and let the user to play with him. When they are done, they close and you will return to the live graph. It's somehow easier, because you are working on a separate copy.
  2. The range of the actual data fed to the curve is controlled by a separate scrollbar X. The scale is then set to autoscale. When the user changes the value of the bar to scroll or zoom, you stop the chart update. That you take back the update after a time-out or after the user makes the scrollbar of the max value or after they have pushed a button to refresh.
  3. Feed you all the data in the chart, but you control the X scale. In this case, you must still decide when to stop the change of scale and when come back.

• Mapping the recurrent node with static values?

  Hello

  I have a WSDL where I need to complete a recurring field < InputField > several times with different values.

  How can I achieve this in processing or of BPEL assign?

  BPEL transform editor Screenshot http://imageshack.com/a/img33/5030/gte8.png

  My SOAP UI application looks like

  " < = xmlns:soapenv soapenv:Envelope ' http://schemas.xmlsoap.org/SOAP/envelope/ ">

  < soapenv:Header / >

  < soapenv:Body >

  < int:getItem >

  <!-in option: - >

  < arg0 transactionId = ""? "sch:ItemId ="264689">"

  < sch:Username > < / sch:Username >

  < sch:Password > < / sch:Password >

  aaaa-mm-jj < sch:DateFormat > < / sch:DateFormat >

  <!-in option: - >

  .SSS aaaa-mm-jj < sch:DateTimeFormat > < / sch:DateTimeFormat >

  <!-zero or more repetitions: - >

  ID < sch:InputField > < / sch:InputField >

  < sch:InputField > summary < / sch:InputField >

  < sch:InputField > status < / sch:InputField >

  < / arg0 >

  < / int:getItem >

  < / soapenv:Body >

  < / soapenv:Envelope >

  I am just a beginner to start with BPEL, so accept my apologies if this question is fundamental very basic

  Thank you

  Hello

  I do not think that the Mapper will take in charge the creation mode, you need to change your XSLT source view in...

  Simply copy and paste the input fields is installed on SoapUI, adapt to the namespaces... That should do it...

  See you soon,.

  Vlad

• Win 10, PS CC and problems Wacom Bamboo (sliding opacity, brush jumps back to start value)

  I have just updated to Windows 10 and I'm generally pretty happy with it. BUT - I have a weird problem in Photoshop CC (last updated).

  I use a Wacom Bamboo Fun. If I try to change the opacity of a layer, or change the size of the brush (the sliding function) the value changes to the starting value. This only happens if I try to make a change less than 10%, for example: 100% to 98%, or 92%. And this only happens when I use the tablet.

  If I use the mouse, it works fine.

  I have already reset the preference file photoshop and reinstalled the driver for wacom.

  Any ideas?

  Thank you!
  Sandra

  Hi eerie

  Please refer tablet support for Photoshop on Windows 8. Did you activate the pen pressure?

  We must also look to flow from the pen

  See this thread How do you clear the pressure of the stylus? to reduce the sensitivity of the pen

  Concerning

  Assani

• Creation of ComboBox with the values of the fields

  Hey everyone, it's been a while since my last post.

  I spent some time trying to fill a ComboBox with the values of the 3 fields of different form of google and I was wondering if someone could tell me on common sense.

  Thanks a lot for any idea!

  the general idea would be something like this:

  Get added to a table field values

  var aItems = [];

  aItems.push (getField("Text1").valueAsString);

  aItems.push (getField("Text2").valueAsString);

  aItems.push (getField("Text3").valueAsString);

  Fill the drop-down list with the elements box

  getField("combo1").setItems (aItems);

  Replace domain names with real field names that you use.

  You can start the list with an element that is a single space (if it appears empty) or something like "- select -". You can also make sure you add all the duplicate entries, which would happen if all the field values are the same.

  When did you want this script to run?

• Check for multiple users with the value of the UID 0

  Hi gurus,
  
  The runclufvy.sh gives the warning below can I ignore this or need to fix for the installation of the 11202 RAC on RHEL 5?
  
  Check for multiple users with the value of the UID 0
  PRVF-4132: several users 'root, jnftsi0' with '0' the UID exists on "hwvpa6".
  PRVF-4132: several users 'root, jnftsi0' with '0' the UID exists on "hwvpa2".
  
  Thank you

  Hello

  The runclufvy.sh gives the warning below can I ignore this or need to fix for the installation of the 11202 RAC on RHEL 5?

  Check for multiple users with the value of the UID 0
  PRVF-4132: several users 'root, jnftsi0' with '0' the UID exists on "hwvpa6".
  PRVF-4132: several users 'root, jnftsi0' with '0' the UID exists on "hwvpa2".

  User jnftsi0 cannot be used by the Oracle Installer or start the Oracle process, because what is the root group.

  If the user jnftsi0 is used by Oracle install or start Oracle process should then be removed from the root group, otherwise you can ignore it.

  Kind regards
  Levi pereira

• Cannot get 'IN' text field with multiple values.

  I have a text field (P11_SERIAL_NUMBERS) someone would use to enter multiple values (i.e. of the serial numbers). I tested various methods but can't seem to get anything working. I used values such as ' 12929', '19191' or ('11919', ' 19192 ', ' 1111') or 12121,121333.»
  
  I have to analyze this area after the entrance is and update P11_SERIAL_NUMBER to something like ("121212 ', 121211', '292929'). The report is a SQL query returning the body of a PL/SQL function. I build the query in an anonymous block to something like the following:
  
  SELECT apex_item.checkbox (1, instance_number) Ins,.
  apex_item. Text(2,i.instance_number) instance_number.
  apex_item. Text(3,i.item_number) item_number.
  description of the apex_item. Text(4,i.Description),
  Serial_number apex_item. Text(5,i.serial_number),
  i.party_name,
  i.status_name
  Cycsi_item_details_v I have
  WHERE i.item_number IN (SELECT v.item_number FROM cycsi_installed_base_v WHERE v.serial_number = i.serial_number v)
  AND i.item_number AS NVL ('%' |') XLA' | ' %','%')
  AND NOT EXISTS (SELECT d.item_serial_number FROM cy_fco_d, d WHERE d.fco_id = 2803 AND d.item_serial_number = i.serial_number) AND i.serial_number IN ('61763 ', ' 61621');
  
  However, when I enter several values that nothing ever went back to the SUMMIT even though the SQL query returns more rows. I run the application in debug mode and it seems to show the values correctly.
  
  0.11: show report
  0.12: determine the column headings
  0.12: analyze the query such as: TRAFFIC
  0.15: binding: ": P11_MODEL_NUMBER"= "P11_MODEL_NUMBER" value = "XLA"»
  0.16: binding: ": P5_FCO_ID"= "P5_FCO_ID" value = "2803"»
  0.17: binding: ": P11_SERIAL_NUMBERS"= "P11_SERIAL_NUMBERS" value = '(' 61621', ' 61763')""
  0.19: print the column headings
  0.19: loop lines: 15 rows
  No data found
  
  If I add only a serial number at a time as the APEX application returns the line correctly.
  
  
  Does anyone have an idea what I'm doing wrong or what best way to solve this problem?
  Thank you
  John
  
  Published by: Jennifer on July 13, 2010 15:23

  Hi John,.

  I just tried a report region based on PL/SQL query encoded using your method to refer to element names in the query string of back:

  declare
     q varchar2(100) := 'select ename, job from emp';
  begin
     if :P2_ENAMES is not null then
          q := q || ' where ename in :P2_ENAMES';
     end if;
  
     wwv_flow.debug('*** Query: ' || q);
  
     return q;
  end;
  

  As I suspected, he did not work for me P2_ENAMES was ('KING') or ('KING', 'SMITH'). I think it's because of the reason for which I gave in my previous post - ApEx passes off the coast of the dynamic execution of SQL string, it does not automatically replace the mention: P2_ENAMES with the value of the element. I don't know how it can work for you.

  If I change the code I proposed:

  declare
     q varchar2(100) := 'select ename, job from emp';
  begin
     if :P2_ENAMES is not null then
          q := q || ' where ename in ' || :P2_ENAMES;
     end if;
  
     wwv_flow.debug('*** Query: ' || q);
  
     return q;
  end;
  

  It works very well if one or several names are specified.

  I took a blow to modify your code for the construction of the query string - does not immediately guarantee, it'll work because I can't test (might be missing a parenthesis or quotation) it but you should get the idea:

  -- start with initial valid query that ApEx can parse to determine column names
  q := 'SELECT apex_item.checkbox(1, instance_number) ins, apex_item.text(2, i.instance_number) instance_number,
               apex_item.text(3, i.item_number) item_number, apex_item.text(4, i.description) description,
               apex_item.text(5, i.serial_number) serial_number, i.party_name, i.status_name
          FROM cycsi_item_details_v i
         WHERE i.item_number IN (SELECT v.item_number
                                   FROM cycsi_installed_base_v v
                                  WHERE v.serial_number = i.serial_number)';
  
  -- add model number condition if specified
  if :P11_MODEL_NUMBER is not null then
     q := q || ' AND i.item_number LIKE ''%' || :P11_MODEL_NUMBER || '''%''';
  end if;
  
  -- add serial numbers condition if specified
  if :P11_SERIAL_NUMBERS is not null then
     q := q || ' AND i.serial_number IN (' || :P11_SERIAL_NUMBERS || ')';
  end if;
  
  -- add FCO id condition if specified
  if :P5_FCO_ID is not null then
     q := q || ' AND NOT EXISTS (SELECT d.item_serial_number
                                   FROM cy_fco_d d
                                  WHERE d.fco_id = ' || :P5_FCO_ID || '
                                    AND d.item_serial_number = i.serial_number)';
  

  I know that has focused on getting this code works, but I would be remiss in my duties if I didn't at least mention the risk of SQL injection. You may already know this, but unless you do a good job to validate the values of the element used in the query, you could open yourself up to a SQL injection attack. For example, imagine what that would be returned if a hacker sharp entered "12345) GOLD (1 = 1" in the field of P11_SERIAL_NUMBERS - you would get all that may or may not be a security problem.

  Hope this helps,
  John

• Problems updating default_where with date values

  Hello
  
  I want to update the attribute default_where with date values. the form is initialized, the attribute default_where = Lieferdatum > =: AB2.von AND Lieferdatum < =: AB2. BIS
  Then, I select the query.
  by fireing the trigger when-click of the mouse, I want to select only the witch value content items: Lieferdatum
  
  declare
  v_bestellnr varchar (200);
  test varchar (200);
  
  Start
  
  v_bestellnr: =: k_falschgeladen_vw. Lieferdatum;
  test: = 'LIEFERDATUM =' | v_bestellnr;
  Set_Block_Property ('K_FALSCHGELADEN_VW' test, DEFAULT_WHERE),
  EXECUTE_QUERY;
  
  end;
  
  I get the message FRM-40505 query could not be reached
  
  Paper copy of the formdeveloper http://www.neusob.de/~RobertKoch/dok1-Dateien/image002.jpg
  
  so, how can I get good value in the default_where attribute

  I hope that the: k_falschgeladen_vw. Lieferdatum is date data type. If so, try the following:

  Set_Block_Property('K_FALSCHGELADEN_VW', DEFAULT_WHERE, 'LIEFERDATUM=TO_DATE(''' || TO_CHAR(:k_falschgeladen_vw.Lieferdatum, 'DD.MM.YYYY') || ''', ''DD.MM.YYYY'')');
  EXECUTE_QUERY;
  

• Siri in him sending text with the value 'NULL '.

  When I say, "Siri, text my wife, 'X', ' Siri responds correctly,"here is your message to Jill: 'X'. "" "  "Ready to send it?"  I say 'Yes' and sends the message.  As soon as I get a text from my carrier saying the recipient of the message was invalid.  100% of the time, I see that Siri has sent a text with the value NULL.

  I tried to restart my phone.  I tried to remove and re-add my contacts.  Anyone else having this problem?  Someone knows how to solve?

  If it's by the carrier, you should contact them and see what they receive in return for their side. Ive had Siri send messages for me and I have never seen this one IOS.

• I have a column with two values, separated by a space, in each line. How to create 2 new columns with the first value in a column, and the second value in another column?

  I have a column with two values, separated by a space, in each line. How do I create 2 new columns with the first value in one column and the second value in another column?

  Add two new columns after than the original with space separated values column.

  

  Select cell B1 and type (or copy and paste it here) the formula:

  = IF (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  shortcut for this is:

  B1 = if (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  C1 = if (Len (a1) > 0, Member SUBSTITUTE (A1, B1 & "", ""), "")

  or

  the formula of the C1 could also be:

  = IF (Len (a1) > 0, RIGHT (A1, LEN (A1) −FIND ("", A1)), "")

  Select cells B1 and C1, copy

  Select cells B1 at the end of the C column, paste

• I just got an email saying that I bought 3 movie rentals with a value of £116,15 via the iTunes store. I've done this! Someone else?

  I just got an email saying that I bought 3 movie rentals with a value of £116,15 via the iTunes store. I've done this! Someone else?

  This is a phishing attempt. Do not respond. Shall not disclose any personal or financial information. You can use the address below to the suspicious message as an attachment to the Apple. [email protected]

  The link below has information to identify fraudulent emails.

  http://support.Apple.com/kb/HT4933

• structure business with interval value

  Hello crew NOR! I have to set a case structure for many cases. But the problem is that cases are not enabled with concrete values, but with intervals, for example:

  in 'A' variable that can have multiple values (including decimals):

  1<= "a"=""> <= 2=""  =""  =""  ="" -="">case 1

  2< "a"=""> <= 3        ="" -="">case 2

  3<"A"> <= 4         ="" -="">case 3

  So, is there a simple way to do this with a business structure?

  Thanks in advance!

  Hello :-)

  If you use a numeric value to trigger the struvture of all you need to do is type 3.15 in the switch case label (note the two period characters) and it will call this case for any value in the range of 3 to 15.

  

  Happy coding!

  Dave.

• Fill an input array with the values from the worksheet

  Is it possible to fill an input array with the values to a text file or a spreadsheet? If so, how do you?

  Thanks to GerdW and all who responded. Fill a table control using a local variable with "The spreadsheet file read" as he entered works perfectly.

• Show largest index in the array with the value 'True '.

  Hello

  Is it possible to show the maximum number of index with the value "true", as indicated under?

  I can show the value on what index series of 'real' ends with the function 'Table Max and Min', but when there
  a fake between these True, it shows that the index of the true left of the fake.

  I don't need to know the size of the table, because he must stay 8

  

  File is attached

  Hi Stef,

  Here you go:

  

• How can I compare unique value with several value...

  Hello

  I want to compare a value with multiple values, how is it possible?

  I tried to design the same logic here as an attachment, but I had the problem that when I entered the value of y that is compared with only a minimum value of x, I don't want I want to compare the value of y with the value of x and then if y is less than x while loop should be stop.

  I want to do because in my program some time I have not result I want, for example, the values of x is 4,5,6,7,8 and value is assumed to be 6 then while loop should be stop but here he considers only less and its 4 here so so that the loop is not stop even there is less then 7 and 8. So I want to compare the value of y with all values of x and if y is less then one of the values while x loop should be stop and led should be on.

  Please guide me how I can do...

  I don't understand?  If there is less than the minimum value of X then it is less than all values of X.  That's what I do anyway: