XY coordinates and colour ref
Hello
First of all, I want to say that I am not a TI, so I just try to do my best.
I'm working on a script to get a document from .csv with the RGB/CMYK color information and the XY coordinates for this color to update in a BBDD.
I have a problem, I found a script that displays only a color that I pick up with the eyedropper (Photoshop).
How can I choose different colors? How can I integrate the XY ref. ?
Thanks in advance
Paula
By any means, get the x & values y for the location of the color sample. Him below show how to get the values of different color. You don't need to change the color of the document space for these different values. I don't know about obtaining Panetone values.
#target photoshop var doc = activeDocument x=200 y=150 doc.colorSamplers.removeAll(); var cS = doc.colorSamplers.add([x,y]) var cR = cS.color.rgb.red; var cG = cS.color.rgb.green; var cBl = cS.color.rgb.blue; var cC = cS.color.cmyk.cyan var cM = cS.color.cmyk.magenta var cY = cS.color.cmyk.yellow var cK = cS.color.cmyk.black var cL = cS.color.lab.l var cA = cS.color.lab.a var cB = cS.color.lab.b
Tags: Photoshop
Similar Questions
-
In hotmail, I can't pass on all messages that the coordinates and the message is not transferred to the new email. However, this works in Windows Live Mail. I use Windows 7 64-bit and 64-bit internet.
Hello Brian,.
There is a forum located there that is specifically for Windows Live Hotmail problems. Here is the link: -
Apex and accept Ref Cursor?
Apex and accept Ref Cursor?
Apex and accept objects?
can someone help me please.
Hi Nani4850,
Nani4850 wrote:
Apex and accept Ref Cursor?
Apex and accept objects?
The language of business for APEX is PL/SQL, so yes you can use REF CURSOR and pass objects to you packaged functions/procedures.
How does this relate to Oracle APEX?
Please explain what you plan to use a REF CURSOR in the APEX.
Kind regards
Kiran
-
differnce between Ref Cursor strong and weak Ref Cursor
differnce between Ref Cursor strong and weak Ref Cursor-------------
Sybrand Bakker
Senior Oracle DBA -
JS: Point coordinates and sizes
I tried to use both visibleBounds and geometricBounds to get an item coordinates and size on the page...
He will give me a strange results as as10.6413765606047, 2.93075, 179.358623439395, 202.93075
Real of the element on the page coordinates are x = 0 mm y = 20mm, L = 200 mm and H = 150 mm, displayed on the Panel,
How can I me real suface of the element from the Group?
can someone please advise? Thank you very much!!
Well, what Peter has suggested is correct. You want to get the top, on the left,
down, right coordinates of an object.
I usually use to define my leaders to "mm" to see better or calculations
for these purposes. Depends on choice
Set the ruler zero point and change the units of measure in mm
var myDoc = app.activeDocument
myDoc.zeroPoint = Array (0,0)
with (myDoc.viewPreferences)
{
var myOldXUnits = horizontalMeasurementUnits;
var myOldYUnits = verticalMeasurementUnits;
horizontalMeasurementUnits = MeasurementUnits.millimeters;
verticalMeasurementUnits = MeasurementUnits.millimeters;
}
See you soon...
-
Library cache pin and Mutex Ref count
I understand that concurrency library cache is managed by library cache pin, and a session must acquire a PIN after blocking, now from 10 g Mutex (cursor: PIN) has replaced the locking pin: library cache. Now the cursor: hand S is incremented when another process is updating the reference (PIN) of a shared cursor count, it is in fact rather than sleep until the mutex is available, my confusion is that before this implementation of ByRef count which is effective, library cache latch was removed and assigned whenever the cursor was executed which was shared of course , now with Ref count each sessions only and only by increments and decrements without deletion and by allocating a memory lock (latch: cache library).
Now what brings to my mind, is that for this mutex, it can be referenced at the same time many sessions, providing that all sessions of reference the mutex in S (shared Mode). So if they can refer to the mutex at the same time I don't think there should be any event queue unless just pending session increment counter Ref, so another question is can multiples at the same time run the cursor with the cursor: pin S. And I think that no. assume the session A, B, C wants to share a C1 cursor, they want to execute all this slider, now a, b and c session I think run independently of this slider, at different times, time, they have the chance to increment the counter of REF. Please remove my confusion, it is a humble request.842638 wrote:
I understand that concurrency library cache is managed by library cache pin, and a session must acquire a PIN after blocking, now from 10 g Mutex (cursor: PIN) has replaced the locking pin: library cache. Now the cursor: hand S is incremented when another process is updating the reference (PIN) of a shared cursor count, it is in fact rather than sleep until the mutex is available, my confusion is that before this implementation of ByRef count which is effective, library cache latch was removed and assigned whenever the cursor was executed which was shared of course , now with Ref count each sessions only and only by increments and decrements without deletion and by allocating a memory lock (latch: cache library).Now what brings to my mind, is that for this mutex, it can be referenced at the same time many sessions, providing that all sessions of reference the mutex in S (shared Mode). So if they can refer to the mutex at the same time I don't think there should be any event queue unless just pending session increment counter Ref, so another question is can multiples at the same time run the cursor with the cursor: pin S. And I think that no. assume the session A, B, C wants to share a C1 cursor, they want to execute all this slider, now a, b and c session I think run independently of this slider, at different times, time, they have the chance to increment the counter of REF. Please remove my confusion, it is a humble request.
I think you see the mutex as an object 1/0 a session must value 1 while it running the cursor. It's actually a counter that a session increments when it wants to run the cursor and decremented when it has finished execution. This means that if you want to run a cursor when the meter is already worth 5, we will both try to set to 6 - one usage will succeed and start execution of the cursor, the other fails but recognize that the meter is now 6 and set it to 7 before execution.
To get detailed information about locks, mutexes and the differences between them, there is no better source of information at http://andreynikolaev.wordpress.com/
Concerning
Jonathan Lewis
http://jonathanlewis.WordPress.com
Author: core Oracle -
Packages and poorly Ref Cursor
SQL Server Developer, I fight with Oracle to say the least. I fought with the poor performance of the extraction of data from the database, but also a multitude of other things. The last number I have is a stored procedure in a package that does not work when run from my .NET code. I have many other packages and stored procedures that are working, but this one is a failure. I don't get any errors, just no data when I should be.
I would run the toad package and see if it is the stored Proc and packaging, or if there is a problem in my .NET code. My stored procedure accepts a single PARAMETER of type integer, and has two parameters SYS_RefCursor OUT. My SQL uses the parameter (ID field) to select from a table. If I run the select SQL by itself with the hardcoded value ID, it works fine. I can run too where it uses the SQL for open cursors and inserts the data but I can't determine if it worked.
So, my questions are the following:
Can I select a Ref_Cursor? I'm trying to do something like that.
If I could get the 1st issue a response, I can keep up with my next question.results_cursor SYS_REFCURSOR; OPEN results_cursor FOR SELECT * FROM Person; SELECT * FROM results_cursor;
Thanks in advance.
JeffHello
I don't see an issue of .NET at this point, so you can have the best chance to post in the forum PLSQL, as it seems that if you need help writing a procedure, rather than interacting with a procedure well known in .NET:
SQL and PL/SQLI'm not clear on your question though. Yes, you can read from a slider ref, and you do it by getting him.
SQL > set serveroutput on
SQL > declare
Ref1 2 sys_refcursor;
3 rec1 emp % rowtype;
Number 4 NTC;
5. start
6. open ref1 for select * from emp;
7 LOOP
8 FETCH INTO rec1 ref1;
9 OUTPUT WHEN ref1% NOTFOUND;
10 DBMS_OUTPUT. Put_line (' name = ' | rec1.ename);
11 END OF LOOP;
12 end;
13.
Name = SMITH
Name = ALLEN
Name = WARD
Name = JONES
Name = MARTIN
Name = BLAKE
Name = CLARK
Name = SCOTT
Name = KING
Name = TURNER
Name = ADAMS
Name = JAMES
Name = FORD
Name = MILLERPL/SQL procedure successfully completed.
SQL >
Maybe if clarify what you are trying to do or accomplish in "selecting from a ref cursor" it would be useful.
Greg
-
How to get the coordinates and the size of the swf to scale components
I use the Web (I put it to the size of the entire screen) to frame a swfloader that loads a swf file with the width and height set to 100%. This swf has a movieclip. How can I get the exact coordinates of his position and its size after the scaling in Flex?
In Flash CS4, the movielip a x = 40, y = 700. In Flex, the swf file is set to 100% scale, but when I get the x value of this movieclip, it is always 40. I try to get the scale of the x axis ratio using scaleX of swf. But his 1, pretty weird.
How can I get the correct coordinates of the movieclip?
The coordinates are usually compared to something. X is relative to the parent.
LocalToGlobal and globalToLocal convert coordinated areas.
You can go to transform.pixelBounds and
transform.concatenatedMatrix.
-
Drag and drop coordinates and put back
Hello
I am developing an application of slide / move. I found a very good example of Gregory Lafrance in the cookbook to work from. http://cookbooks.adobe.com/post_Simple_example_of_using_a_container_as_a_drag_and-16272.ht ml.
I want to keep the coordinates of the images when they are deposited to the target in a table. In addition, let the user repositioning (drag) the image that is already on the target area. If an image is repositioned, and then update the coordinates.I'm looking for advice on how to solve this problem. How I would get the image data once it has been copied and moved to the target area? I appreciate any information you can give me on this topic.
Thank you!
Hello
You need not really store contact information, a way to 'drop' on a target is to create truly a 'keeper' this passer-by holder has an image inside and the holder can also do things like moving around the drop target, because you create these holders, you can store them in a table so that you have a list of DEA escaped objects also you can browse the list and get coordinates etc.
http://gumbo.flashhub.net/pagedrop/ - source included
This example creates a container for the deleted image that allows you to manipulate the size of rotation and the position of the picture dropped, load some images drag an image on the main application and see what happens when you go over it.
David
-
Need the difference between strong Ref Cursor and weak Ref Cursor examples
Oracle 9.2
It would be great if someone can help understand the differences between
1 Strong Ref Cursors(return type)
and
2. weak Ref Cursor (no return type)
What I read is weak ref Cursor as sys_refcursor is better to use the ref Cursor, because in the case of slider strong Ref object type that will be returned must be declared in advance. It dosent make sense to me?
I start with the examples would be appreciate for advice
Strong Ref Cursor
create the package str_pack
is
type sref_type is ref cursor return emp % rowtype;
SVAR sref_type;
end str_pack;
Create procedure st_proc (eid in number, c1 on str_pack.sref_type)
is
Start
Open c1 to select empno, ename, sal from emp where empno = eid;
end;
declare
str_pack.sref_type C1;
type rec is RECORD (eid, ename varchar2 number (20), number of sal);
SheikYerbouti rec;
Start
st_proc(10,C1);
loop
When exit c1% notfound;
Fetch c1 into SheikYerbouti.
end loop;
Close c1;
end;
There could be errors in the above example but its basically to get a better understanding.
For weak Ref Cursor
procedure of the child
Create procedure child_proc (in number, c1 on sys_refcursor eid)
is
Start
Open c1 to select empno, ename, sal from emp where empno = eid;
end;
parent process
Create procedure parent_proc (recnum varchar2)
is
p_retcur sys_refcursor;
emp_row emp % rowtype;
Start
child_proc (eid, p_retcur);
loop
extract the p_retcur in emp_row;
dbms_output.put_line(emp_row.empno ||) e '|| emp_row. Ename | "wins". emp_row. SAL);
end loop;
end parent_proc;
Concerning
@Hello
the fundamental difference is to do with the compiling and linking of runtime type that occurs.
The he should explain a lot more detail than I could ever!
http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:1640161160708P;
-
Casting table PL/SQL for the type of existing table and back ref cursor
Hello
I have the problem of casting a pl/sql table for the type of an existing table and turning the ref cursor to the application. Casting a ref cursor back and number of pl/sql table works well.
Declarant
< strong > TYPE type_table_name IS TABLE OF THE package_name.table_name%ROWTYPE; < facilities >
within the stored procedure, fill in a table of this type temp_table_name and returning the ref cursor help
< strong > results OPEN to SELECT * FROM TABLE (CAST (temp_table_name AS type_table_name)); < facilities >
generates an error. type_table_name is unknown in this distribution. According to me, this happens because of the declaration of the type locally.
Statement type_table_name inside the package specification does not work neither. Incredible, cast to the said dbms_sql.number_table to specify ref cursor back and dbms_sql package works very well!
< strong > CREATE TYPE type_table_name IS TABLE OF THE package_name.table_name%ROWTYPE; < facilities > deals without any error but creates an invalid type complain a reference to package_name.table_name
I don't want to declare every column in the table in type_table_name, because any change the table_name table would result in an inconsistent type_table_name.
Thanks in advance!
Edited by: user6014545 the 20.10.2008 01:04In any case you are right that there is a problem around anchorage (or maintaining) types of objects persistent to match the table structures, they may represent.
In the case you describe, you might be better off just open the refcursor immediately the using one of the techniques described in the http://www.williamrobertson.net/documents/comma-separated.html to manage the delimited list.
In the more general case where the line of treatment is necessary, you may make the pipeline functions.
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production SQL> CREATE TABLE table_name 2 AS 3 SELECT ename column_name 4 FROM emps; Table created. SQL> CREATE OR REPLACE PACKAGE package_name 2 AS 3 TYPE type_name IS TABLE OF table_name%ROWTYPE; 4 5 FUNCTION function_name_pipelined ( 6 parameter_name IN VARCHAR2) 7 RETURN type_name PIPELINED; 8 9 FUNCTION function_name_refcursor ( 10 parameter_name IN VARCHAR2) 11 RETURN sys_refcursor; 12 END package_name; 13 / Package created. SQL> CREATE OR REPLACE PACKAGE BODY package_name 2 AS 3 FUNCTION function_name_pipelined ( 4 parameter_name IN VARCHAR2) 5 RETURN type_name PIPELINED 6 IS 7 BEGIN 8 FOR record_name IN ( 9 SELECT table_alias.* 10 FROM table_name table_alias 11 WHERE table_alias.column_name LIKE parameter_name) LOOP 12 13 PIPE ROW (record_name); 14 END LOOP; 15 16 RETURN; 17 END function_name_pipelined; 18 19 FUNCTION function_name_refcursor ( 20 parameter_name IN VARCHAR2) 21 RETURN sys_refcursor 22 IS 23 variable_name sys_refcursor; 24 BEGIN 25 OPEN variable_name FOR 26 SELECT table_alias.* 27 FROM TABLE (package_name.function_name_pipelined ( 28 parameter_name)) table_alias; 29 30 RETURN variable_name; 31 END function_name_refcursor; 32 END package_name; 33 / Package body created. SQL> VARIABLE variable_name REFCURSOR; SQL> SET AUTOPRINT ON; SQL> BEGIN 2 :variable_name := package_name.function_name_refcursor ('%A%'); 3 END; 4 / PL/SQL procedure successfully completed. COLUMN_NAME ----------- ALLEN WARD MARTIN BLAKE CLARK ADAMS JAMES 7 rows selected. SQL> ALTER TABLE table_name ADD (new_column_name VARCHAR2 (1) DEFAULT 'X'); Table altered. SQL> BEGIN 2 :variable_name := package_name.function_name_refcursor ('%A%'); 3 END; 4 / PL/SQL procedure successfully completed. COLUMN_NAME NEW_COLUMN_NAME ----------- --------------- ALLEN X WARD X MARTIN X BLAKE X CLARK X ADAMS X JAMES X 7 rows selected. SQL>
-
HP C5280 has an ink cartridge error and says refer to printer documentation.
My HP C5280 printer just printing to quit smoking and the above error message. I have always used HP cartridges. Black is 74XL with expiration 2014-01-14, and the color is a 75XL expires 31/05/2012.
Is the problem because the color cartridge is expired or is there another question?
Yes, I would venture to say that it is the cause of the error message. However, to make sure try this:
Remove the expired cartridge. Now with the power still on, remove the power at the rear of the printer. Wait at least 30 seconds, then plug the power cord into the printer. Turn on the printer. Replace the cartridge and see if the message clears. If this isn't the case, then this is the cartridge.
-
problem with coordinates and child index
Hi guys,.
In my application I view contacts as card according to the image, so, for example, if the user clicks "Contact 2" he should come to "communicate with 3" position and "Touch 3" should return to "Contact 2" s.
I've been swapping coordinated and child index of these sprites, but it didn't work like I wanted...
can someone suggest a better logic?
Thanks in advance
Hi guys,.
I solved it myself, silly me!
All I had to do was:
1. move the child 'index' to numChildren - 1
2. move the numChildren child - 2 to "index".
Phew!!!!!!!!!!!!!!!!
-
The phone is a HUAWEI G7010
Windows7Hi EdwardTorr,
Thanks for posting your question in the Microsoft Community forums.
To provide the proper resolution, that I would need more information on your side.
1. in what exactly mean you by "computer and phone to get married looking for a Bluetooth device?
2. you are trying to connect to a Bluetooth device?
3. what exactly happens when you try to connect to a Bluetooth device?
4. do you receive any error messages?Method 1:
I suggest you run the hardware and devices Troubleshooter to check if it helps.Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-TroubleshooterMethod 2:
If the problem persists, I suggest you try the procedure described in the article and see if it helps.Connect to Bluetooth and other wireless or network devices
http://Windows.Microsoft.com/en-in/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devicesCheck out the link for more information.
Add a Bluetooth device or other wireless or network device: frequently asked questions
http://Windows.Microsoft.com/en-in/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questionsHope this information helps you. If you need additional help or information on Windows, I'll be happy to help you.
-
Export failed to achieve the required bit rate and colour care space - ProRes 422 in MPEG2
With the help of first Pro CC v7 I exported a ProRes 422 (HQ) MPEG2 file and selected the HD 1080 p 23.976 preset. I needed the finished file to have a minimum of 50Mbps flow and the color space to be YUV422. I was under the minimum flow rate and the color space is incorrect. Can someone please instruct me on how to get my desired results. Thank you!
MXF OP1a XDCAM options are hard wired for the correct settings for each preset - in the case of 422 @ 50 mbit, it already uses a preset CBR (constant bit rate). The main codec Concept always Compress contents, so it is quite possible that your source material will eventually take less space than 50 Mbps, depending on the complexity of the images. There is nothing to replace it, you can change, it's just the codec do its thing.
I don't see how the color space was incorrect, unless you take what you think that you have chosen. Make sure you're one of the presets that has 50 in the name, picking, and other (18/35) VBR and space colorimetric 420. You can check the presets under the video tab - if you have a 50 mbit preset selected, the video codec should list something like "XDCAM HD 50 NTSC (4:2:2)".
Wil
Maybe you are looking for
-
The new watch OS is so amazing. But I want to tell you guys about the new mode of emergencies. Why the watch cannot pretend and send to 911 on your health statistics? I would find so nice detect no. or stop blood pressure and call 911 automatically.
-
Reached at the number on apple ID account is not fair and cannot be changed
Hi, I have 3 phones and I used the same apple ID for all wrong. I managed to have an ID separate apple for each phone to try to separate things now. Unfortunately, there are some residual mix ups. One of them being the accessible number on my account
-
Hi all Updated to version 7.7 and suddenly all my windows live/msn contacts have disappeared. check my other devices and the same thing happened (another pc and mac) Have passwords reset. Once all my Skype accounts + microsoft + facebook. still no jo
-
Greetings, I posted this thread in the server instances earlier because it's over my whole environment that this occurs, but since someone there told me to post it here, here goes: We have a problem with the index.dat (*) of locked files by the winlo
-
Original title: the cdfs file?How to open the cd with the cdfs files