Y at - it a library user templates were created and displayed their models to?

Similar Questions

• Disable users from the IOM AND ALLOW THEIR MANUELLEMENT in OID...

  Hello
  
  I have connected to OID IOM.
  
  When I disable a user to the IOM, the attribute orclisenabled for this user is set to DISABLED
  Now when I change manually DISABLED active in OID and the task of reconstruction of target, the IOM user remains disabled and when I check the profile of the resources, the user OID resource is ENABLED.
  
  This should not happen. I want the case, when I manually ENABLE users disabled in OID and recon task, the user still needs to get disabled in OID
  
  Is it possible to achieve this condition?

  Hi Elise,.

  I think that the reason is due to the improver method to set the jar file. Simply copy the java code into Notepad and save it as java file only.Compile this java code so that you will get the java class. The you can create c like

  jar filename.jar javafilename.class cf

  Using this command, we can create a jar file. Just try it this way. I think that this will solve your problem.

  Thank you best regards &,.

  Rajesh.

• User Manager to create and use "projects".

  I scanned by the doc and videos, but don't know how to activate a Manager create "projects" and use only "Scheduled" technique

  Any suggestion?

  This is done with the permissions on the roll, in that the Manager will be

  

  Delete the ones you don't want to give them

• Looking for where Pages (V 5.6.1) stores the user templates?

  Where Pages version 5.6.1 (2562) hold/store the user templates?

  It may have been stored somewhere not too difficult to find in the past but, boy, did they really hid them this time!

  Based on a clean install of Page version 5.6.1 (2562), I found my model hiding in the following path:

  /Users/yourusername/Library/Containers/com.apple.iWork.Pages/Data/Library/Application\ models of support/User\.

  or, if you like HFS

  Users:yourusername: Library:Containers:com.apple.iWork.Pages: Data: Library:Application Support: User Templates

  You don't know why they make it so difficult to find, but that's it. File names ending with '.template '.

  If you use the Finder, you may need to 'show hidden files' and you'll probably need to right-click and "View the contents of the package" to look in the com.apple.iWork.Pages folder.

  I need get the user templates folder because I had two model bearing similar names. "V2.1" in name and the other was "v2.5" in the name. Unfortunately, there is nothing in the Pages that will show you all the details on the model (date of creation or modification) and make a right click you give Rename or delete the options in the Pages model choose. It turns out that my model "v2.1" was actually more recent and I wanted to remove the "v2.5".

• Can we call library user directly labview vi in teststand?

  Hello

  I'm calling one of the libraries of the labview teststand user directly. I get errors when running (Catpure.png attachment).

  If I create labview file and use this library vi in labview with same entries that then use this labview in teststand, and teststand is happy (capture2.png, capture3.png).

  I would like to know if I can call library user directly labview vis in teststand or should have create my own vi call this lib from there? Can someone let me know?

  Kind regards

  Hema

  Hi Hema,

  In general, screw calling for a Bachelor's degree in LAW (LabVIEW library) TestStand works very well. I have attached a sequence that makes calls to a VI in a Bachelor's degree in LAW and a VI out of one. This works as expected.

  The error you get is probably the result of another problem. Please add more details about the error, the versions TestStand and LabVIEW, you use and if you have set the LabVIEW LabVIEW RunTimeEngine adapter or LabVIEW Development System.

  PS: The image you attached shows the setting for the call of VI step and it seems to be loading fine (no provider indicating a loading error error). If the step throws an error only when executed, then attach a snapshot of the error dialog box that is displayed or the report that has the details of the error.

• How can I add a Document template to my library of templates with forms already implemented?

  How can I add a Document template to my library of templates with forms already implemented?

  I use the same contract repeatedly to different customers and need to set up the custom fields every time which is a total pain.  Also, there is no option 'Add a Document Template' in my account anywhere, where the tutorials do not say that it should be or anywhere else.

  How can I fix it?

  
  Ben

  Hello Ben,

  You can go to the dashboard-> additional functions and click on "Add document to the library", and then can download the form inside. If your document already contains form fields, they would automatically get detected. Otherwise, you can also add form fields in EchoSign too.

  Kind regards

  -Usman

• Library, title templates... no load on the first pro CC?

  Hello I have install Library, title templates, projects of missing model on first pro CC, but it won't load? How?

  For the preselections Dl Installer go to http://helpx.adobe.com/x-productkb/multi/library-functional-content-missing.html

  The installed Presets folder must be associated with Pr CC. In Windows, it is in C:/Program Files/Adobe/Adobe first Pro CC.

• PC accessed remotely by hackers, all certificates, keys, authorizations, for my PC and my identity were copied and stolen. Several online accounts had been accessed by a third party.

  Online remote access to my PC and my credentials and personal information were stolen. I had several compromised online accounts. I had Windows Live using their remote access three times service and my computer is always connected remotely. I'm stuck using many admin capabilities. The task manager says there is more than one user, but I'm the only visible.  Name resolution Protocol, Peer Networking peer Peer Networking Identity Manager, Remote Procedure Call, Mapper by point final CPP, Windows connect now Config clerk, are among the many active services right now. Resource monitor shows me connected to a remote network, there are other IPS listed other than mine. I found a hidden desk top, with map of the network... including an android phone, a Tablet PC Input Panel with a foreign alphabet. There are many programs, I've never added to my PC. I find the hidden devices that are listed as part of a network, they do not belong to my PC. My modem has no Wy - Fy, or my router. I removed the ethernet cables... the power cord, monitor, keyboard and mouse. My modem has been disconnected from the external source and the router, but was still connected and powered on, all the lights were not on showing no connection. Very shortly, I saw the indicatator of DSL connection will begin to Flash. I unplugged the modem. A minute later, I heard the ping and the squeal to initialize an internet connection from my flat satellite receiver. When I checked my PC, he was very quietly running in stealth mode, apparently fleeing electricity drawn from the speakers I left wired. I'm sure you can tell just by reading that I don't know much about computers. This situation has worried me. Microsoft said that they fixed access points and it was clean from the virus and malware. Apparently it is not. I ask to change my IP address or security credentials, regardless of which is used to verify my identity, my question is did not answer, leaving unresolved.  I am very concerned because all certificates of proof of identity online, IPaddress, Signatures etc., were copied and stolen.  The hackers have the opportunity to make me look at will and have used it to seep into my GMAIL, FACEBOOK and some other accounts. I am at a loss. I will contact Microsoft Live again... I paid cover me 30 days it wil expire on 5 December. I guess that my cyber identity has been stolen. Is it me as a victim of identity theft? Should the technicians who worked on my computer could solve my problem to be hacked and stolen ID. I made a police report a few weeks, I was told it wasn't a crime unless I could prove identity theft, that was before I had no Service. Contact the FBI. Any help or advice or anything at all that you can provide would be greatly appreciated. I don't know which forum to post in both, if I choose wrong... Please help to direct my concerns to where it can be treated... Thank you a lot =)

  The first thing you need to do is change ALL your passwords on all accounts - using a known machine - cleaning - and NOT connect to them with a mchine to which you think is infected.

  Then only you should undertake the cleaning of the machine.

• My first computer user when I created the second user... Help! :(

  Hello, I really ned a quick response... :/

  So I created a second user yestarday, so I had them 2, after some time I switched user and then turned my pc of. Later when I went to loggn in my user to fir trees, I couldn't, because it was just possible to loggn into second account... it does not show that there first user, I had...

  The second user that I created was a Director? would it be posible that my first user is deleted somehow? :((

  I don't know what's heppening, but I really need the other user, because its so much important things for me! :(

  But I still do not see him... It's like gone...:(quand j'ai voulu loggin àle premier utilisateur, il ne m'a donné choix trop choisi premier utilisateur ou en second lieu, c'est juste me demanda pasword à deuxième utilisateur j'ai créé:(()

  Please help me, I need a lot of treatment

  If I read your post correctly, I guess the account you were using was the original administrator account which can be renamed.  When you create a 2nd account, it is normal that Windows hide the original at this point administrator account.  Rename the user administrator does not rename the profile, so you will probably find your files in 'Administrator' in the folder c:\documents and settings\.  This may be the reason why your account is hidden.

  If this is the case, to log in to your original account, when you get to the opening of session "Welcome" with only the 2nd account, press Ctrl-Alt-Del twice.  This should bring up a login screen 'classic '.  Try typing your user name and password in the boxes and see if you can connect.

  If you can connect and want two accounts to display, you need to create another profile and transfer your files/data in this additional profile and leave the original hidden administrator account.  To do this, pretend that your hidden account profile is corrupt and follow one of the following procedures:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  "How to copy data from a corrupted to a new profile in Windows XP user profile"
    <>http://support.Microsoft.com/kb/811151 >

  HTH,
  JW

• media player does not open. Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Maybe the info will offer something that you haven't tried:

  First, launch... Task Manager...

  How to launch the Task Manager instantly in Windows XP or Vista?
  http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-Vista

  The Task Manager / processes tab select (highlight) any which instance of:
  "wmplayer.exe" and left click on the button "complete the process".

  If you see a dialog box 'Warning'... left click Yes.

  Close the Task Manager.

  Try Windows Media Player again.

  And... the following links may be worth a visit:

  (925704) when I try to use Windows Media Player 11, the program
  does not start, or some user interface elements are empty
  http://support.Microsoft.com/kb/925704

  Please see the following article for info on opening a high command
  Prompt in Vista

  Windows Vista - command prompt: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
  (scroll down to: how to run a command with elevated privileges?)

  Good luck...

• When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. »

  original title:

  When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. "I can't spend anything for users of our families because they ask for approval from the admin and it won't work. What can I do to correct the admin user?

  You have another admin account , you can connect?
  If so, please do it and then run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.

  3. If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: System Restore tutorialtutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I put my C:\Users\AccountName files hidden and then changed their return, but now all my files are misplaced or foires

  It is a long story as to why I did it, I'll try to keep it as short as possible, but also detailed.

  I tried to get my graphics card drivers (it is an AMD Radeon) updated on my Acer laptop because I had errors of lighting in several video games, but my Catalyst Control Center has stopped working whenever I opened it. So I googled many answers, found none, contacted the technical support for it, they re-installed my graphics drivers from the card for me through the Acer eRecovery Manager (since I bought the computer with the graphics card built in), but the problem persist and so I searched for answers, and told to set the file C:\Users hidden and then visible again and it should allow the CCC work properly. But when I went into c:\Users--> properties, there is no option to set it to Hidden. So, I thought since my info is in my c:\Users\AccountName file, I click with the right button on this folder and went to properties, and the option was there. So, I put THIS folder hidden and freaked out a little when everything on my desk apparently disappeared from existence. But in my panic, I went to C:\Users-->Properties again and he now give me the option set to hidden. So I did, and once it was done, I unchecked the box hidden again and all my files reappear, thank God.

  However, this is my problem begins. All my files and folders that were inside the C:\Users\AccountName have been restored to be visible, but now, Google Chrome and Dropbox are unable to sync properly (and who knows what other sync accounts have stopped working?) and any where both move files or how many times I reinstall, they are still unable to sync. It seems that some of my files have been moved to places that they are not supposed to be? Dropbox has been moved somehow to C:\Users\AccountName\AppData\Roaming and to contact their support team, they said that it is not recommended because it is there. But even after the move to other places, he always did the same thing.

  To describe the problem that happens in both:

  -Google Chrome:

  It gives me the orange icon at the top and says I need to sign in again. She does everytime I open the browser. Once I log in, it says that my sync data is out of date or something like that. And no matter how many times I tried to solve this problem, everytime I open the browser he reconnects with the orange icon and I have to sign in again once.

  -Dropbox:

  By clicking on the icon, it gives me a permissions error and says that "store your home folder on a network share can also cause this problem. And of course it has been moved somehow to AppData\Roaming without put me there. Uninstall completely and put it back in place as AppData\Roaming automatically and still will not let me move it.

  So I'm not sure what is happening. I really need help with this because I use dropbox for many things, and google chrome allows me to stay connected to all the sites that I hear every day so now I will have to sign in everytime I visit which is extremely annoying. Above all, however, I am worried what other things have been affected by this problem. If you have any ideas on what is happening and how I could fix this, please let me know. Thank you.

  Natalie,

  Please contact the Microsoft Community.

  To cancel your changes in a way simple and most effective would be to perform a restore of the system-

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings

  Note: Perform a system restore will cancel all changes made on your
  computer earlier. You may also lose unsaved information as well. Proceed to
  your own risk.

  Let us know if this is useful.

• Windows user login will not be displayed

  Laptop Acer 5742 G (upgrade to 1 TB HARD drive)

  Problem: User login Windows is not appear.

  History:

  I wanted to fast my laptop at the start and so I did the exercise verified and I edited programs and services to load at startup, after that I got a new start, all services were disabled, put them on automatic and I run even if that bit of wouldn't start. After that System Restore might work, I restored it 2 days ago. He didn't restore properly because my anti-virus has been on and so I closed and he again. Now every time I boot my OS the Windows user login will not be displayed even in Mode without failure or last good Configuration, it keeps black.

  What can I do? Thanks in advance...

  
  And in the meantime when I continue to press ALT and quickly hit F10 for eRecovery Acer in the trunk, will not work as well.

  Hello BrickBone,

  You need start using the Windows 7 installation disc and try startup repair options.

  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the installation disc of Windows 7 or a USB flash drive or with a system repair disc if you have created one previously.

  To use this method, you need to restart (boot) your computer using the disc or USB flash drive.

  1. Insert the disc to install Windows 7 or USB flash drive, or a system repair disc, and then turn off your computer.

  2. Restart your computer using the power button on the computer.

  3. When you are prompted, press a key, and then follow the instructions that appear.

  4. On the page install Windows, or on the System Recovery Options page, choose your language and other preferences, and then click Next.

     • If the page install Windows or the System Recovery Options page appears, and you are not prompted to press a key, you may need to change some settings of the system. To learn how, see start your computer from a disk to install Windows 7 or USB flash drive.

  5. If you are using Windows or the USB flash drive installation disc, click on repair your computer.

  6. Select the Windows installation you want to repair, and then click Next.

  7. In the System Recovery Options menu, click a tool to open it.

  Select the Startup Repair option.

  Let us know if that helps.

  Marilyn

• Is there a template to create structured questionnaires?

  I'm trying to create a questionnaire where select an answer to a question would automatically "jump" the user to the next relevant question, so they do not have to wade through a lot of irrelevant questions. I also want to add guidance notes to each question. Is there a model that will allow me to do this? If this is not the case, how can I create such an interactive PDF?

  Hi stewartm27723103,

  Which product do you have to create forms? Some models are FormsCentral (who is retiring in July). XI Acrobat includes the FormsCentral Desktop application, so you can access templates since there too (choose file > Create > creation form, then choose from a template to browse available models.) If you can't find one you like, you can create one from scratch. Here is some information about the conditional form fields configuration, i.e. which, according to me, you ask about your first sentence above: FormsCentral help. Edit field properties

  Please let us know how it goes.

  Best,

  Sara

• 'Burned' fingers index to use MacBook Pro trackpad: my both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  Yes, I did

  My both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  I do not have this problem before, I bought my new Mac - specifications below: it hurts and I don't have a problem with my windows, iPad or Samsung Galaxy equipment operating systems computers.

  It feels like radiation leaking through the computer case.  Is the radiation involved in the chips?

  MacBook Pro

  Model identifier: MacBookPro11, 4

  Processor name: Intel Core i7

  Processor speed: 2.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Boot ROM version: MBP114.0172.B06

  Version of the SCM (System): 2.29f24

  Are you use while plugged in, I feel a buzzing in my 13-inch rMBP (12.1)