Y at - it any solution workaround for mounting device on ESX 3.5 without any 3rd party paid solution?

Similar Questions

• Get any 3rd party plug-ins audio to work with the latest version of PP

  Hi, I posted to this topic before, but still need help.  When I updated to Adobe Premiere Pro 2015.3 CC (from the previous version of PP), all my plug-ins audio disappeared.  When I tried to reload it in PP, I get this message after that it seems to load all plug-ins, and then none of them loaded.  I'm certainly not the only one who had this problem?  Someone suggested repair permissions on my boot drive, I did, and I still get this error in PP.  Literally, I can't do any video work until I have my audio plug-ins back.  If anyone on this forum can help me, contact Adobe directly?  Also, I'm on a Mac Pro (4.1) running Mac OS 10.10.5.

  Thank you!

  Nicholas

  

  Update: this issue has been resolved by Adobe technical support.

• Extend C drive without any 3rd Party Software.

  Hi people,

  Please read carefully before sticking a step by step tutorial.

  How can I extend the space in C drive. There is lots of space available in the E drive. I'm ok to remove E: via diskmgmt.msc. If I remove the E drive it gives me no allocated space, but extend the option is grayed out in disk management console.

  Thank you best regards &,.

  Ramesh koffi

  Given that the 210 GB unallocated partition is separate from your system partition (drive C :) partition active 300 MByte, you cannot extend C: drive. First of all, you need to move the 300 MB partition at the end. partition managers 3rd party can do that, but the native Disk Manager can not.

  Here's a way laborious but sure to reach your goal without the help of tools 3rd party:

  1. Create an image of your installation. Store it on an external drive.
  2. Burn a CD to repair Windows System.
  3. Start the computer with this CD.
  4. Check if it can see the picture that you took in step 1.
  5. Start normally.
  6. Delete the partition of 300 MB.
  7. Extend the C: drive. Make sure you leave free 310 MB at the end of the ar.
  8. Create a partition NTFS primary & active to the end.
  9. Start the computer with the CD to repair.
  10. Select the option to repair the boot environment. He must restore the boot environment.

  If the procedure above fails, then you can restore the image that you created in step 1.

• Crashing - workaround for a synchronization solution?

  My iTunes crashes - the problem * may * be my computer.  I've just updated iTunes, no apparent difference.

  I have a new computer, but in the meantime, I would like to synchronize the new things I just downloaded.

  Is it possible to make a synchronization between an iPhone and a Windows computer without using iTunes?

  Thank you!

  MediaMonkey can add content to an iDevice for you, but you really should sort out the problems with iTunes. If you do not already have a backup Act now before the machine fails on you. See Save your iTunes for Windows with SyncToy library.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  If you have tried the suggestions above without success, then another option is to go back to the previous version of iTunes that has worked for you. See the roll back tips to installers of iTunes. Roll back of 12.3.3 will be to restore the pre-upgrade library in the previous iTunes libraries folder.

  TT2

• No solution workaround for links to KB which do not work?

  Hello

  Is there no workaround for links to the knowledge base not work not?

  It has been a while since I tried to use the support site. It is changed so that I'm completely lost. I can't find the Knowledge Base articles, and when I find a link that should take me to a KB article I get a 404 error.

  Link to example

  https://support.Apple.com/en-us/HT203202

  Thank you.

  How you try to use the support site? What is your workflow?

• What is the workaround for the Smart keyboard ESC key?

  What is the workaround for the Smart keyboard ESC key?

  For what purposes? In any application, or even the home screen, hold down the "Command" key to view the list of keyboard shortcuts that work specifically with this app.

  Thank you for using communities of support from Apple!

  Ryan

  iPad Keyboard Pro & Smart, iOS 9.2

• Workaround for VARCHAR2 (32767) limit?

  Hello

  I have a stored proc that declares a string as VARCHAR2 (32767), I generate a few htmlcode and post it. It's my data has grown too big and now I get:

  ORA-06502: PL/SQL: digital or value error: character string buffer too small

  
  

  Is there a workaround for which implies not if my string into pieces?

  
  

  Thank you
  

  Use instead of VARCHAR2, CLOB CLOB supports the huge chain sizes (several gigabytes).

  Note, if you build your code html to the top with the literal string ("this is a string literal"), you can't go beyond 32 k for a given literal.  You can concatenate several pieces of k 32 well

  For example...

  vMyClob: = 'This is a string of 32 k...' » || "It's another channel 32 k..."

• Is there a fix or workaround for flash run on an iPad?

  Is there a fix or workaround for flash run on an iPad, I have an interface that works on a USB stick and now wants to use dropbox to distrubute the interface. Can anyone help?

  No, sorry.  Adobe will release Flash Player for iOS in the foreseeable future.

  There is an explanation of our priorities and the technical roadmap here:

  http://www.Adobe.com/devnet/FlashPlatform/whitepapers/roadmap.html

  You * can * create standalone applications for iOS using Adobe AIR.

• I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices.

  I have a Macbook air running OS X El Capitan. I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices. I don't know if I need to restart the time Capsule or change the wireless setting, etc. ?

  Please advise...

  The TC appears in airport utility? If not then it is probably not part of your network or is lost... upgrade installed you El Capo because there a lot of questions.

  What is the TC plugged into the network by ethernet? And configured properly? Are you to internet via the TC... but can not see his drive... that would be typical?

  Have you set Finder preferences to display the network drives? Apple keeps making it difficult for some unknown reason.

  You actually have to mount the drive TC if it appears under shared... it still may not appear if you double click on it. Under the search box on the top of the right hand you see Connect (As) box, type the name or IP address of the TC in there... Make sure that you save the password from your keychain.

  I try to use my Time Capsule as external hard drive

  For the storage of the files it is fine.

  For the execution of direct files for an application in the Mac, you are very likely to damage or corrupt the file at some point.

  And how do you do backups? Time Machine can't help you... it won't work.

  Backup is crucial, especially if you do things apple say not to do... That is to say move your photos or the iphoto library to the TC and try to use direct from there... expect any day to need a resumption of the library.

• Found no media for this device

  My Toshiba satellite C655 model laptop couldnot find peripheral Audio High definition audio bus for the Windows Xp operating system. When tried to install the audio driver for Conexant high defintion an error pop up to install microsoft Universal Audio Architecture and couldnot find media for this device. I tried all ways but couldnot find any solution. Please help me...

  Hello

  This seems to be a known problem with this particular model and driver:

  See the link provided below, the Toshiba Forums to resolve the problem:

  http://forums.Toshiba.com/T5/sound-audio/Toshiba-C655-SP6001L-audio-driver-XP-7-32-bits/TD-p/131716

  For more support board you can also contact Toshiba Support

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Network adapter 802.11n keeps stalling in Message' no. get error Windows 7 drivers are installed for this device. »

  Original title: 802.11n network adapter keeps dropping out

  My network card, Ralink 802.11n for Windows 7 Professional 64-bit, continues to stall as I have no connection to any network.  When I check the network card, he said, "no drivers are installed for this device."  If I try to update the driver, it indicates that the drivers are up to date.  The only way to get the device working properly is to shut down the laptop and restart.  When I do this the device manager says that the network card is working properly.  I looked at other solutions, but none of them seem quite fit.  I use a HP probook 4320 s laptop and I recently installed a I have to drive with the Windows 7 software pre-installed on the drive.

  Hello

  According to the description, I understand in your computer continues network to drop out of school and gives the error that "no drivers are installed for this device. I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  This problem may occur because of corruption in the network driver or the network driver is not properly installed in your computer.

  Please follow the troubleshooting mentioned method below to check if his help.

  Method 1: run the network troubleshooter utility.

  The problem report contains one or more event logs. Administrators Network and technical support staff can use the information in the event logs to analyze connectivity problems or help interpret the findings. You can find this information by clicking on display of detailed information on the last page of the troubleshooting tool, or by following these steps:

  1. Open troubleshooting by clicking the Start button, on Panel configuration, and then, under system and security, clicking on find and fix problems.
  2. In the left pane, click View history.
  3. Right click on the troubleshooting report, and then click details.

  If the problem persists, follow the next method.

  Method 2: uninstall and reinstall the network driver.

  Please follow the steps below.

  1. Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In Device Manager, look for the network adapter.
  3. Right-click on the adapter and select uninstall.
  4. After uninstalling the network driver restart the driver.

  After the computer restarts, Windows will automatically try to install the driver real network. If not, I recommend you download the latest driver available from the manufacturer's Web site and check if its help.

  Please follow the below link to download the driver from the manufacturer websites (HP) network.

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4145372&swLangOid=8&swEnvOid=4059

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• NVIDIA GeForce 8400M GT: the driver is installed for this device is not compatible with Windows 7 (from Vista 32-bit)

  Hi all, I am interested in my Sony Vaio AR41L (under Vista 32 bit SP2) upgrade to Windows 7, but when I run the Windows 7 Upgrade Advisor, it tells me that, for the graphics card, NVIDIA GeForce 8400 M GT, the driver "installed for this device is not compatible with Windows 7.

  Apparently, NVIDIA is not a solution and sent people to Sony, and Sony say that they have not updated the drivers for Windows 7 and that we do not know when they expect to do...

  All known and solved this problem?  Any suggestions would be very helpful!

  Thanks in advance.

  someone noted that nVidia will come out a new batch of pilots in the coming days. (once a month)

  It may be desirable to wait outside and continue with VGA Standard at the moment. Help others, tell us which solves your problem. Click useful Vote for those who help.

• Elgato HD60 Pro card causing "error allocation bar of e/s for pci device" at startup on Dell Precision T7500 (Windows 10 boots well after that freeze but occasionally)

  I have a Dell Precision T7500 with two processors, Xeon, 48GB of RAM, and recently I bought a PCI card captures Elgato HD60 Pro for streaming play.

  Whenever the card is inserted, I see an error saying to start (after the Dell logo and before Windows loads):

  "22/00/0: Error allocating I/O BAR for PCI device.

  I have 2 other PCI cards, which I removed and also tried to install the Elgato map on the other 2 slots, but the problem only goes away when the Elgato card is NOT installed.

  Any ideas?

  This is not a dell product.

  https://help.Elgato.com/

  Error allocating I/O BAR for PCI device

  strike F1 to retry boot, F2 for Setup utility

  The PCI-E bus is version 1.1, but your card is version 2.1

  http://Ark.Intel.com/products/36783/Intel-5520-IO-hub

  Your Xeon processors are not listed as the min spec core I5 3 rd Gen.

  There is no solution for this its the same reason that OLD maps sound and TV Tuner cards also do not work in the latest and most recent machines.

  For PCI and PCIe devices, a BAR is a Base address register which is used by the BIOS or the OS to tell the device door on what looks to match its memory resources in. Most of the PCI devices in your system requires a certain amount of memory space, and the BIOS tries to adapt all inferior to 4 GB for compatibility with 32-bit operating systems.

• 3rd party such as san replication solution: strategy

  Dear Experts,

  Can you please share some of your ideas.

  Oracle DataGuard comes free with Oracle Enterprise Edition (EE). The only reason why a company could NOT use Oracle DataGuard is because they are not on the ERA and the cost of upgrading to EE just to use DataGuard does not justify the price.

  With 3rd party such as san replication solution. (for example hp3par)

  It is obvious that the all-flash backup can be quick.

  What should be the strategy to have DR site get a few seconds, if the primary site failed for some reason any

  1. daily incremental backup with RMAN. And archive backup runs for every 1 minutes

  2. so that the DR site facing up and running within 60 seconds, it still requires too much time to restore the database on remote site and have archive APPLIED setpoint

  What could be the solution with san replication? RTO = 60 seconds

  Thanks ivw

  Hello

  Great topic, I'll try to summarize all this in a post.

  I have worked with HP EVA for a few years and I must say that I have used many of the features of replication - HP EVA Business Copy (local replication) and HP EVA continues access (remote replication) as well - for the oracle database and other applications as well. Most storage systems use copy-on-write to create two points in time of the LUN (snapshot) image or clone LUN using cow again.

  Of course, like other people, said earlier the replication SAN is block based, in the same way with Dataguard, you have synchronous and asynchronous replication. When your data is written to the data files it usually goes in storage cache and then is pushed down the disc as soon as it will be more efficient, at the same point, replication is pushing data to the Dominican Republic. The same way with Dataguard if you use synchronous replication that you won't get you "speedy return" until the blocks of primary storage has been written for DR storage system.

  I never had problems with replication to be honest. I used a lot of copy of databases of production using local replication. For example if you want to quickly test a patch on the production system, you can create a snapshot that will only increase with the amount of changes you have made. The only concern is nowadays though we use ASM so if your diskgroup names are the same in DEV that the PROD does not work the approach that I mention.

  Regarding remote replication - because you do not have Dataguard more every time you failover to the Dominican Republic to your database will pass by instance recovery!

  Regardless of the type of replication is not the speed but the latency of the network - SAN or Dataguard, you will always have a penalty of a long replication distance. The biggest typical WAN latency factor is the speed of light, via fiber optic cable, which is about 124 miles per millisecond. Based on that you can calculate what would be the round-trip latency time.

  Indeed for many people SE installation choose DBvisit Standby to manage their databases on hold. I did the installation of the couple and it is really simple and works out of the box. However, your RPO depends on how often you switch your redologs and how many times you ship them to the backup site. You must configure dbvisit to spend with each log file (all the 5,10,15 minutes) OR configure archive_lag_target to configure OR use both at the same time. Also, you can store a copy of the archivelogs on a separate location just in case, for example, an NFS share.

  And finally my five cents on RAC on Clusters of extended - be careful with this one. Each of the nodes in the extended database cluster need access to both storage (primary and DR) systems. You must also third location to store a voting quorum disk, usually an NFS share. It is also very important to note that the latency between the nodes is of crucial importance due to global cache activity.

  Kind regards

  EVS

• How to send different content for different devices

  Hello

  I would like to set up my Dreamweaver CC site to send a Unity3D game (requires the browser plugin) for desktop but send a video trailer of the game for tablets and phones.  The problem is that the Unity 3D web player does not work on tablets and phones I have Adobe Muse who would do this simple enough that you can send a different content for different devices easily, but Muse does not support the unity 3D plugin.

  I explored websites Bootstrap and sensitive, but I don't think that's the answer.  I have found a lot of tips and tutorials on how to send the same content but formatted differently to different devices, but I couldn't find anything on the use of Bootstrap to send any content to different devices.  Is it possible to use for this media queries?

  I read a little, but about setting up subdomains.  Is this the way forward?  Any advice will be greatly appreciated.  Thank you.

  Zaid

  Hi Nancy, thanks for your idea, but I just found a solution so easy, that it makes me feel stupid that I can't find as soon as possible.  My site host, Business Catalyst, allows you to create your site with content for phone and tablet in different folders.  Then, you can route these files to the phone features or tablet.  It's a simple drop down menu choices.  You don't have to do subdomains or anything like that.  Wow, what a relief!

  Zaid