"Bricks" WRT310n V1

Similar Questions

• WRT310N Firmware failed and now I had a brick

  Okay, first of all, it's my fault, and the router is a few years old.

  I started having problems with my router disconnect and I have to restart. Today I decided to update the firmware.

  Watch the Cisco site, it is said that if you don't see a version under the model number number, using the version 1.

  I downloaded the firmware version 1, but after about 3 seconds after the upgrade of the router kicks back "Firmware Upgrade Failed".

  Thus, suspecting that maybe I have version 2.0. I downloaded the 2.0 version and completed the upgrade. When he finished I got "Firmware Upgrade Successful" and I clicked 'OK', 'Restart', 'Reboot' or something like that was, button. Nothing, got good lights everywhere but no connection with anything either.

  Tried the reset for 30 seconds, reset 30 seconds then unplug and then plug in the connection then give 30 seconds, then unplug and then plug and wait 30 seconds while holding down the reset button. I tried almost everything and nothing has restored this router.

  The internet, ethernet port and wireless lights just Flash away. I even tried tftp image .bin for the router, but that has expired.

  Any ideas?

  Thank you

  OK, its working now.

  I've done what link said to do, but because every attempt has failed, I did a reboot and that he noticed my ping was successful during the boot. I also changed my IP to 192.168.1.100 as it is the first available by default in a linksys router IP address.

  I have no idea where the author of this article gets but 1.10 each new router begins at 1,100. Could be a typo.

  So, the next time I tried. I started the tftp right until I plugged the router and about 10 seconds later, I saw good pings and poof a download successful.

  Router is now in action.

  Thanks for the replies.

• iOS 10.0.2 temporarily brick iPad 4th generation

  My IPad 4th generation has been temporarily briquée by iOS 10.0.2. Be it finally resolved itself, but I still have questions like a shift of keystrokes and on my home screen. Any suggestions?

  What do you mean it "brick". Exactly what happened, and how did it resolve? What did you see on the screen, and you haven't tried the OTA, or with iTunes update? Since then, what did you do to try to resolve this discrepancy you describe?

• After I have updated to ios 10.0.1 my apps update bricks. How can I fix it?

  After that I update to iOS 10.0.1, my apps started the update, but it brick and I can't stop the update, I can't use apps and I can't even delete apps. Please how can I fix it. It is so boring.

  Thanks for help. Kevin

  First (and easiest) is a reboot or a forced reboot:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Next (and more radical) would be a restore from a backup, then restore it like new:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

• IPhone 4S brick after put 9.3.5 updated

  I have an iPhone 4S which recently prompted me to download and install the latest 9.3.5 update.  At halfway through the process stopped updating, and now the phone keeps stuck in mode 'connect to iTunes '.

  I tried restore and update regularly through iTunes as well, and the restore process ends with an error (29). Error message is:

  The iPhone "iPhone" could not be restored. An unknown error occurred (29).

  1. my phone is a factory unlocked phone, so no Jailbreak etc has never been done

  2. I was able to update my phone until 9.3.4 with no problems before this

  3. I changed the usb cords, computers etc.

  4. my iTunes is the more up-to-date version.

  Has anyone else seen this problem as well on the other iPhone 4S? Any ideas on how to solve this problem?

  just tried to do the same thing on my 4S - bricked with the request to connect to iTunes - which did not help if - error 29 (or 39?) ensures the Outlander when I have that either opt to choose to update or restore

• ITunes will not be up-to-date or restore phone bricked

  So, unfortunately I was among the unlucky ones who got their brick phone trying to update to ios10.

  I looked at how to solve this problem and tried the iTunes method. It took about 45 minutes and even though he says all 2.16 GB have been installed, it did not work. He kept asking me to update and more. I tried to restore and still nothing works. I'm really upset because I've had this phone for 2 months only. I have an iPhone 64 GB SE btw. Help?

  Uninstall itunes then cradle mobile apple, reinstall itunes. Try to update again.

• iPhone5 16 GB Bricked by update iOS10

  1] iOS10 downloaded on-line at iPhone5 16 GB on September 13 at 18.15UK time; iPhone brick; showing all Apple symbol on the screen

  [2] to force the iPhone to reboot, producing a screen with lines of code on it; do not even respond by trying to connect to the MAC / iTunes via a cable; force reboot multiple times, produces the same results

  [3] to wait for the battery to be drained by himself before the rest of the procedure; Once the battery is completely drained, to connect the iPhone to iTunes via the cable and finally, the iPhone restarts again like 9.3

  [4] update iTunes last version; to connect and to backup the iPhone via iTunes; to proceed with the update iPhone to iOS10 via iTunes; update fails because the iPhone crashes immediately after starting the update, showing the sign of the Apple and the frozen mill

  [5] new several reboots of the iPhone; Finally get screen with the sign "connect to iTunes". iPhone recognized by iTunes in recovery mode and forced to restore to the factory settings; Restore without success, showing the sign of the Apple and the mill frozen on iPhone; iTunes pop up message with "unknown error" 4005 & 4013; tried different cables and computers with the same result

  [6] appointment of genious Bar created and programmed next week... I guess we will have to deal with some issues by then as for our lack of a plan to Apple Care, or that they are unable to provide due support that we have changed the display of the original iPhone for another, or who knows...

  Thus, it is: any suggestions on alternative methods to solve this incident?

  Thanks in advance.

  Try the following steps to solve the problem with iOS 10.

  1. Connect your iPhone to your computer via iTunes.
  2. Wait about 30 seconds to let iTunes your reading device.
  3. Click Update on your computer when you are prompted, who, "is there a problem with the [device] who forces him to update or restore."
  4. Again click the update on your computer when you are prompted, "If your [device] is unable to be updated, you need to restore it to its factory settings."
  5. Click on restore if you see «your iPad cannot be updated...» "(you won't necessarily have to restore).
  6. Click Restore and update to confirm that you want to restore your device to its factory settings.

  You can also use this information to fix the problem https://support.apple.com/en-us/HT201210

• 10 bricking my iPhone i0S

  I am aware that people have had their iphones in brick after that 10 updated, and Apple iOS said it's been fixed, but my phone seems to be brick.

  I downloaded the update on my phone and connected to itunes via USB when you ask him of the screen. It completely downloaded, and I clicked on the iphone eject button in itunes. Now it is stuck on the screen instructing you to connect the phone to itunes.

  What should I do? Install the update again?

  Your phone is in recovery. Something might have happened during the update. I suggest you do a recovery of strength using iTunes

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

  iPhone 6s more stuck in the mode of the brick after downloading ios10. Cannot restore via iTunes. error 3014

  After the update to ios10, my 5s iPhone seems to work very well. I reconnected it to iTunes and then it bricked, and I panicked.

  iTunes synced a couple of times, it took about an hour and a half for me. After that it stopped its cycle of synchronization, I unplugged my iPhone - it still bricked. I then did a hard reset and it worked.

  Maybe I got lucky, maybe my iPhone and iTunes need a kick in their buttocks.

• IPhone 6s bricks after updating iOS 10

  I am of the unlucky few phoning in brick to the iTunes screen or the iOS 10. now I was not back up my phone ahead, and now I do not know how to actually use my phone or attach it bricking. Help, please

  Recovery mode > If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• New Ipod Touch (6th generation)... Brick!

  New Ipod Touch (6th generation).  Right out of the box and as expected, another update Super bricks my new Ipod Touch.  My question is HOW?  And before you ask, YES everything has been updated to the latest version (itunes, Java, QuickTime, IE, Windows and other applications you can think of).  I purposely keep a copy of an older version of Itunes on an old laptop running because this is the only version that will recognize my Ipod when happen (both latest and Itunes).  Given zero has no effect.

  When say you that the device is brick what is on the screen today? It does not force a reset? Try If your iPhone, iPad or iPod touch does not illuminate, If iTunes does not your iPad, iPhone or iPod , or If you cannot update or restore your iPhone, iPad, or iPod touch.

  See this note about QuickTime.

  TT2

• ZTE C open brick after upgrade. Fastboot showing errors: "E:misssing bitmap installing_text-1 of the code.

  tried to flash a version of v2.2 for ZTE c open;
  bricks on the phone;
  tried to boot in fastboot for recovery;
  fastboot is blocked, it is impossible to move the selection with volume +/-buttons;

  error message (see photo):
  E:misssing bitmap installing_text
  (code-1)
  E:misssing bitmap erasing_text
  (code-1)
  E:misssing bitmap no_command_text
  (code-1)
  E:misssing bitmap texte_erreur
  (code-1)
  E: failed to open/tmp/last_install (no such file or directory)
  E: failed to open/tmp/error_code (no such file or directory)
  E: failed to open/tmp/source_code (no such file or directory)

  It fixed;
  had to use a WINDOWS tool provided by comebuy:
  Open_C_upgrade_Tool
  has worked like a charm.

  Section Linux has done does not for me; (https://developer.mozilla.org/en-US/docs/Mozilla/Firefox_OS/Phone_guide/ZTE_OPEN_C#I_bricked_my_phone)

  BUT: does NOT work the software update provided on-line, which is immediately available! Instantly broke again;
  has had to repeat the upgrade of windows

• uppdate iOS 9.3 bricked my iPad2, now what?

  iOS 9.3 COMPLAINT

  I've been asked for some time updating the iOS 9.1 on my 2 32 GB iPad for version 9.3.

  Apple says that iPad is working well so far and I have had no personal reason to update, but "you should always upgrade to the latest version" for reasons of security...

  So I did. After that my iPad asked to connect to iTunes.

  So I connected. My options were 'Update' or 'Factory Reset'.

  I chose "update" a few times, but all ended in an error message (different every time).

  I even tried to update via iTunes updated on several different computers.

  So finally, I resorted to a Factory Reset.

  The difference is visible is that now, not even my iPad ID present in iTunes when you try to connect.

  It seems that the attempt to update totally and completely brick my iPad.

  Suggestions anyone?

  EVIL - the _lead_me_to_believe_ just updated, it's just my iPad in brick.

  Here's how I see what happened, and what didn't update to inform me.

  The first question here was the download (1.33 GB) took an hour to complete with iTunes.

  However, after 15-20 minutes the updater had fed up and said something to the effect that he didn't connect to the download server and offered for the update or restore again.

  This message is confusing. My computer connects to everything else, so why not Apple download server. Some error messages suggest that the Hosts file needs to be reset. Why? After all, he has not presented a problem before, or for other programs. Another message (1639?) provided that the download is still in progress the idea, '' maybe. '' And it has been.

  If I answer the "Connection failed" message by selecting the update again, the download continues, but since it takes an hour to complete the download, try the same the second fails with the message "cannot connect". And even a third update attempt will fail in the same way.

  Instead, the update should have told me something to the effect of: "now, waited about fifteen to twenty minutes for the download to complete, so I'm getting impatient. However, I checked with my download manager and he told me that the download progress always with an estimated time of arrival in about 45 minutes. If you think you can speed up the transmission (for example...) then press Cancel and solve the problem, otherwise the update will continue. "Of course, the download page should be displayed so I could easily see the progress of the download for my part.

  _knows_ iTunes as the download progresses, then what good me with "unexpected, not able to connect" messages.

  (Even if the Hosts file was the problem, I think that the update might be more useful because the solution seems to be (temporarily) replace it with a standard hosts file. The path-> error message from Apple description-> Microsoft Host difficulty description-> some editor to edit a standard-> new-> Save Backup old file, seems too complex compared to just update provide the standard file hosts for me.)

  The second issue was that, when the update file has been downloaded and the update of the iPad has begun some initial activity there. A result that I see is that the serial number of the iPad is most recognized (not so comforting).

  In iTunes, I see "expects the iPad" (to answer, I guess).

  On the iPad, I can see a greyed on the Apple logo and a progress bar is empty (I suppose, he is waiting for the download start)

  My conclusion is that the iPad is ready to receive the update, but that iTunes has not yet been allowed to send.

  So, I started searching the Internet for 'update stuck forever', but this time I thought I should give it an hour before I completely gave up on it.

  It really looked like a situation of blocking for about twenty minutes or thereabouts - but here, the bar began filling so the update of progress could be completed.

  During these twenty minutes I should have received a comforting feedback to make myself understood there was work going on in the background. I don't know what took so long. (My internet connection is slow does not affect USB download, it should?). OK, I could see some flashing lights, but I interpreted as "still establishing a connection between iTunes and iPad, or vice versa. Thus, 'always blocked.

  I often pretend to my friends Apple infrastructure is robust and easy to use. But this challenge really three days I wonder if it is more valuable...

  Anyway, for now I'm going back the Samsung pad I bought yesterday... hoping that Apple will respond positively to this info.

  Cordially /Macake

• 10.11.6 bricks just my mac mini - what to do?

  All my applications are reported missing or inaccessible. Icons are missing in the dock and apps can be open to all. In addition, I can't run Carbon Copy Cloner because my old mini will not start on a USB 3.0 device.

  What a fantastic "update." I thought that it would be just a minor update and now my computer is entirely bricked.

  I googled this and found absolutely no solution.

  WTH?

  Boot from the recovery drive and select reinstall OS x.

  How to reinstall OS X - Apple support

  It does not erase your drive. It reinstalls the software system and install apps on your current.

• IPhone bricks 6 after 9.3.2

  I am EXTREMELY * RIGHT NOW... I've just updated the 9.3.2 update and it bricked my phone.* * APPLE? I had so much data out there, I was going to backup but didn't because I didn't think it was necessary because it was just a simple update. THE ONLY THING THAT I WORRY ABOUT IS MY VIDEOS. How tf I download those out of it. When I go into itunes, it is says something like, "this iphone is locked and cannot connect to itunes without entering the password".

  I NEED THESE VIDEOS. I'm fine I NEED to do a restore is just YouTube videos. Please, I'm SO * right now please help me

  Apple you for making me spend by *... * I YOU!