Y at - it something to pass classes without causing conflicts to project?

Similar Questions

• Satellite L750 - close without cause

  Hello! I have a new Toshiba Satellite L750.
  Sometimes my laptop turns off automatically without cause and restart automatically (low cpu temperature: I know because sometimes it happens when the computer is turned on for a few minutes).

  Can do something or I have to put the pc on the repair center?

  Thank you very much!

  Hello

  Please recover the laptop using the recovery of HARD drive option or recover the disk you can create using the Toshiba Recovery Disk Creator.
  If the question will always be, get in touch with a Toshiba ASP in your country in order to verify the material.

  Good luck!

• With the help of QNX classes in a Flex library project

  In order to deploy on multiple platforms, I'm building my application "headless"; changes of main application based on the OS class, I'm to deploy, but the underlying library remains the same. I have my classes of library in their own Flex library project and specific classes of Playbook in their own project. Currently I can not all classes of QNX to appear inside my library project, but they appear fine in my main application project. I have the main application and library using the Playbook SDK 0.9.1 projects.

  Is there something special I need to do for a project of library in QNX classes, or am I missing something obvious? Thank you!

  Hey,.

  the screenshots that I showed you were from my application for flash builder 4.5 burrito. If the menus are a little different. It's my flash builder 4.0.1 application menu:

  

  and with libraries extended:

  

  from the looks of things, your SDK have not installed or is not read correctly. you follow and do all according to the start-up for windows guide? Good luck!

• Can I install my copy of Windows 7 that is on my Mac on my pc without causing problems?

  install windows 7 on xp

  I have windows XP and am getting error system323\config\system damaged or missing.  I also run a mac with windows 7 installed using Parallels.  In order to get my PC and running, can I just install windows 7 on top of / on the side of the xp without causing any problems.  I'm not to technically savy, so if you can keep the simple answer would be appreciated.

  I have windows XP and am getting error system323\config\system damaged or missing.  I also run a mac with windows 7 installed using Parallels.  In order to get my PC and running, can I just install windows 7 on top of / on the side of the xp without causing any problems.  I'm not to technically savy, so if you can keep the simple answer would be appreciated.

  Do you have an additional (unused) license of Windows 7?

  Is HCL and supported by the manufacturer (motherboard, video card, sound card, chipset devices, network, etc.) in Windows 7 in this system it has Windows XP on it?  (Hardware support in any operating system isn't from the hardware manufacturer - the manufacturer of the BONE).

  If the answer is no, either among young people, so your answer is 'no' until you ensure the answer to the bnoth who is 'yes '.  :-)

  With regard to the problem you have with Windows XP - if you have a Windows XP installation CD (or can get one of the same version and edition as your system)...

  How do I recover from a corrupted registry that prevents Windows XP startup

• In Windows XP, the $ntUninstall directories can be deleted without causing problems.

  I have Windows XP SP3 POS PC in our retail store lcocations.  These machines have a slightly smaller boot partition.  My question is, when you install updates from Microsoft, it creates an uninstall directory in the Windows directory.  So Windows XP, $ntUninstall directories can be deleted without causing problems or causing previous updates to be reinstalled.

  I have Windows XP SP3 POS PC in our retail store lcocations.  These machines have a slightly smaller boot partition.  My question is, when you install updates from Microsoft, it creates an uninstall directory in the Windows directory.  So Windows XP, $ntUninstall directories can be deleted without causing problems or causing previous updates to be reinstalled.

  The article at the link below gives a detailed explanation of the $ntUninstall directories. This should you guide as to whether or not you can remove folders.

  http://ask-Leo.com/can_ntuninstall_folders_be_deleted.html

• Going on vacation - can safely, I let my DV6T on during a week without causing damage?

  Going on vacation - can safely, I let my DV6T on during a week without causing damage?  I need answer auto outlook to inform customers that I am out of town.

  Hello

  In fact almost all email clients/agents so, including Gmail, Yahoo mail, Hotmail... You don't need to turn on the machine to get the Auto response. This is for the Outlook 2007 installation:

  http://Office.Microsoft.com/en-us/Outlook-Help/automatically-reply-to-messages-with-the-out-of-Office-Assistant-HP001232830.aspx

  You can test after that. Again, no need to have computer to get auto answer.

  Kind regards.

• I use SyncToy 2.1 for syncing between two readers and I wonder if it is possible to synchronize three discs without causing confusion for SyncToy.

  Hi all, I use SyncToy 2.1 for syncing between two readers and I wonder if it is possible to synchronize three discs without causing confusion for SyncToy. In other words, I want to have a (portable) master and synchronize with a Home Office and a disc of office disc.

  Original title: SyncToy 2.1

  Hello

  Thanks for posting your question on Microsoft Community!

  After your description, it seems that you need more information about SyncToy 2.1.

  I would like the season help you post you question on the following link for better.
  http://social.Microsoft.com/forums/en-us/SyncToy/threads

  I hope this helps!

• How to edit a photo without making the whole project

  I'm working on a personal project, a collage. Is it possible to edit a photo in the collage without affecting the overall project?

  Sure.

  Photo Collage Toolkit

  Scripts for Photoshop is powerful and I think that this package demonstrates this a video showing a collage of 5 model PSD image fills with images:

  The package includes four simple rules to follow to make Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.

  1. Models of photo collage for the desired print size - width and height of the size and DPI print resolution.
  2. Photo collage templates must have a background layer in Photoshop. The content of this layer can be anything.
  3. Photo collage templates must have alpha channels named "Picture 1", "Picture 2"... "Picture n".
  4. Photo collage templates layers above the background layers must provide transparent areas to reveal the images which will be placed below them.

  There are twelve scripts in this package, they provide the following functions:

  1. TestCollageTemplate.jsx - used to test a model of Collage of Photo while you're doing it with Photoshop.
  2. CollageTemplateBuilder.jsx - can build models that are compatible with this toolkit scripts.
  3. LayerToAlphaChan.jsx - used to convert a stack of the Prototype Image layers in a document template.
  4. InteractivePopulateCollage.jsx - used to fill interactively model Any Photo Collage. Offers more user control insert images and text.
  5. ReplaceCollageImage.jsx - allows to replace an object layer dynamic image collage populated with another image resized and positioned correctly.
  6. ChangeTextSize.jsx - this script can be used to change the size of text Image stamps when the size used by the filling did not work well.
  7. PopulateCollageTemplate.jsx - used to fill a Photo Collage template and leave the populated copy automatically opened in Photoshop.
  8. BatchOneImageCollage.jsx - used for the models automatically batch fill Collage that have only a single image inserted. The Collage or picture may be stamped with the text.
  9. BatchMultiImageCollage.jsx - used to model automatically batch fill any Photo Collage with images in an image source folder. Easier to use than the interactive script. Recorded collages can be twisted.
  10. BatchPicturePackage.jsx - used to model automatically batch fill any Photo Collage with an image in the image source folder
  11. PasteImageRoll.jsx - paste Images into a document to print on roll paper.
  12. PCTpreferences.jsx - edit this file to customize Collage fill preset scripts and add your own layer styles.

  Documentation and examples

• can I delete the temporary chm without messing up my project?

  I have a huge project with 33 folders, and about 20 000 htm files. Build a chm file, and there is a copy of each file in temp of chm files. If I try to do a search on the entire project, it also search these records. I wonder if I can delete these temporary files without screwing up my project. Thank you.

  Hello

  No matter what with the Temp it is subject to demolition. You should be fine.

  I believe that RoboHelp creates before compilation of CHM. It * SHOULD * be clean once finished, so it may be necessary to some research that occurs as to why they are being left behind. Unless, at some point the process fails.

  See you soon... Rick

• Reduce the folders in Windows 7 for photos without causeing with PSE11 problem

  I want to simplify my Windows 7 files and reduce the number of files. Can you please advise me on the best way to do so as not to cause problems with PSE11 to find the photos? Thank you.

  19441965 wrote:

  I want to simplify my Windows 7 files and reduce the number of files. Can you please advise me on the best way to do so as not to cause problems with PSE11 to find the photos? Thank you.

  The only way to move files or Folders/subfolders without causing problems, which does not create a 'missing files' is to go to the bosom of the Organizer, not the operating system (Win/Mac).

  You can create folders and move images of the Organizer.

  Note that if you move the files of several subfolders in one alone, you run the risk of wanting to move files with the same file name in the same folder; your operating system will not allow that. If the Organizer will rename images if necessary.

  If you want to do such a task big reorganization, absolutely do a complete backup before. There is no advantage for a reorganization organizing point of view, but if you need it for some reason, it must be done from the Organizer.

• Request to close class (without GUI) app via the Menu - help please!

  Hello everyone, as you can see I took the sample application for the execution of a background application and adds a system-wide menu. The question is how can I properly close the application via the menu.

  I just moved from the C++ so mental conversion to Java is running (learn a lot of new ways to cause exceptions in a whole new language)

  Any help would be appreciated, I've seen the question several times with no response or vague answers and no code to back it up.

  Thank you!

  /**
  * GUILessApplication
  *
  * A sample application that appears on the Ribbon
  * but has no user interface.
  */

  package guiLessApp;

  Net.rim.device.api.system import. *;
  Import net.rim.blackberry.api.menuitem.ApplicationMenuItem;
  Import net.rim.blackberry.api.menuitem.ApplicationMenuItemRepository;

  / public final class GUILessApp extends Application
  {
  public static BackGroundApp backGroundApp;
           
  Public Shared Sub main (String [] args)
  {
  PAP GUILessApp = new GUILessApp();
  theApp.enterEventDispatcher ();
  }

  public GUILessApp()
  {
  Creates and starts a new thread BackGroundApp.
            
  backGroundApp = new BackGroundApp();
  backGroundApp.start ();
                     
  MyMenuItem myMenuitem = new MyMenuItem (17);

  ApplicationMenuItemRepository
  .getInstance (.addMenuItem)
  (ApplicationMenuItemRepository
  . MENUITEM_SYSTEM, myMenuitem);
  }
      
  The thread that is running in the background.
  SerializableAttribute public class BackGroundApp extends Thread
  {
  Boolean stopThread = false;
  public synchronized void stop()
  {
  stopThread = true;
  }

  public void run()
  {
  While (! stopThread)
  {
  You must run your treatment here.
  This example prints just one line
  in the output window BlackBerry JDE
  System.out.println ("Application is running");

  Sleep for 5 seconds to avoid the
  application to run out of control
  Try
  {
  Sleep (5000);
  }
  catch (System.Exception e)
  {
  Exception handling would be here.
  }
  }
  }
  }
  Stop the thread to exit.
  protected void onExit()
  {
  backGroundApp.stop ();
  }
  }

  class MyMenuItem extends ApplicationMenuItem {}

  using default constructors here.
  MyMenuItem (order int) {}
  Super (Order);
  }

  We must implement methods
  Run is called when the menuItem is called
  public Object execute (object context) {}

  do something here

  return the context;
  }

  toString must return the string that we want to
  use as a marker of the menuItem
  public String toString() {}
  return "Close App";
  }
  }

  Perfect!, just it sorted and it works like a charm.

• locked out of my access denied hard drive I'm the adminastrator? files was broken or something how to fix without cd

  Access hard drive c: undeniable access I'm the adminastrator. files broken or something that I don't have a cd to reinstall his striped how to fix no cd and no access to drive c? In addition to the upgrade

  If you can log in as any user with administrator privileges, you should be able to 'ownership '.

  The quick check for administrative privileges is to right-click on 'start '.  If "Open All Users", it's one of the options displayed in the window, so you don't have administrator privileges.

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• How to set fire to a branch to pass parameters without url?

  is it possible to pull a branch when the user clicks on a link on the page. I have a report on a page #2 and one column is 'serialno. When the user clicks on the link, the application needs to go to the page #3 and view the details for the series. However, due to security restrictions, I can't spend the serialno in the url. is it possbile to set the page point serialno page #3 in the branch that directs the user to the #3 page and show the details? any ideas are appreciated.
  
  Kind regards
  Surya
  
  Published by: sgodavar on August 13, 2010 16:10

  Hello

  Here's what I think is an easy way to do it.

  1 edit the SERIALNO column in the reports attribute tab
  2. change the target of the link URL column
  3. in the URL, type the line below. #SERIALNO # is the column of the report

  javascript:doSumbit('#SERIALNO#') 
  

  4 write an OnSubit of calculation or process to assign the value of #SERIALNO # to the element in the Page 3 (say P3_ITEM1)

  a. assignment can be: P3_ITEM1: =: APPLICATION; (or SQL)
  b. calculation / condition of process will be the Expression of PL/SQL

      regexp_like(:REQUEST,'^[[:digit:]]).*$') -- all numeric request, no semicolon at end in Apex 4
     
  

  5. creation of a branch of the condition to go to Page 3, with regexp_like above as a condition.

  Here's what will happen.
  a. by clicking on the link of the report will cause a transmission with demand = serialno (supposed to be entirely digital in this example)
  b. trap you and process applications digital all assign them value takes the point on Page3.
  c. branch Page 3 on the same condition of application being digital.

  Above is the basic concept, you can do more complex and flexible using prefixes and suffixes in doSubmit and REGEXP_LIKE to allow multiple links of this type of a report.
  Kind regards

• Beta 4 - Momentics IDE seized semiautomatic does not work for Qt classes in the newly created projects?

  After you have uninstalled the Beta 3 Momentics IDE und install the new beta 4, I noticed that the autocompletion of the IDE not working anymore for Qt classes when I create a new project from a template (empty or non-empty). It seems that the IDE cannot find the Qt header files:

  

  But I can compile the project without problems.

  When I import my old projects created with the Beta 3 of the autocompletion also works for Qt classes. When I compared to them, I noticed that the Makefiles have changed completely.

  Of course I could stay with my old project structure, but the Release Notes for the Beta 4 mention something about the changes in the Qt libraries, pre-compiled headers and so on who might require changes in Beta 3 projects. To avoid problems, I thought I could just create new projects in Beta 4 and re-import my source files for my Beta 3 projects. But I want to keep the autocompletition for Qt classes.

  I guess it's just a problem in files created automatically from the project. Is there a way to remedy?

  Thanks for your replies. The trick to rebuild the index was useful, but does not solve the problem in itself.

  But comparing all files in some of my old projects of Cascades generated in Beta 3 and newly generated in Beta 4, I found that in the Beta 4 project files .cproject, missing several tags that setting the include path for Qt for the IDE headers. Note, I'm not referring to the railways include the settings of the compiler here. Just autocompletion and also the analysis of the code in the IDE has not worked.

  In any case, to solve this problem, I found the following solution:

  There are four instances of these tags in the file .cproject of a Cascades (beta 4) project:

  Where NNNNN is a number randomly. When I change all these 4 cases to:

  .. .then they review as they did in the Beta 3 and then refresh the project or restart the IDE autocompletion all started working again for new projects of Beta 4. When I then invoke Index-> reconstruction such as recommended in the other thread also the analysis of the C++ code for the work of syntax errors and semantics again (if you have enabled in the IDE).

  I suppose that these lines could also be included in the model files somewhere in the NDK of BB installation folder, but I didn't fix files it.

  I have submitted a new question here:
  https://www.BlackBerry.com/jira/browse/BBTEN-466

• I deleted something in the windows which caused my computer to not allow any new installation. How can I fix it?

  I have reviewed all the files except the program files and System 32 and has done a lot of deletion due my computer of spinning and spinning and spinning... etc.  After that I tried to analyze something and scan it gave me a message that there is no driver found.  I tried to reinstall the driver and tried to reinstall another driver to a different scanner, but my computer does not have a configuration.  Can someone help me with this?

  • Tried a System Restore to a point before delete you?
  • You may need to perform a repair of Windows XP Installation , but you want to do this carefully if you have a newer version of Internet Explorer installed now.  It would work BETTER if you have your installation media of Windows XP with Service Pack 3 integrated into it because it is likely that you have Service Pack 3 installed on your computer now (and the 90 + updates come after that).
  • Finally - how are * your * backups of * your * stuff?  Your documents, your photos, your music, your bookmarks, your installable applications, your serial numbers and product keys, etc. and so on?  Also, do you know what hardware drivers your system needs to communicate correctly with all the material inside and connected to your computer?  (Belarc Advisor would be a good FREE tool to run and print the results if you can.  It lists a lot of this information for you.)  You maybe just to perform a new installation of Windows XP.

  Come back - let us know what is happening and how things are going.