Y450 new Audio driver

Similar Questions

• Satellite Pro U200 - installing the audio driver on Win XP

  I have a Satellite Pro U200 and there is no sound - sound fine when attached to the DynaDock, but not when its autonomous.

  Device Manager there down as an existing audio device - I downloaded the driver audio from Toshiba Web site but when I try and install it says "the HD Audio bus driver is required and not found" I did a little research and found in necessary MS hotfix KB888111 which I installed it, but the audio driver will not even install - ideas?

  Windows XP must install patch KB888111 and KB835221 MS site before installing the audio driver.

  -so finally you need to install the two patches
  -Download Realtek audio driver from the Realtek page
  -remove the old driver its the laptop restart of Device Manager and install the new audio driver download

  Greetings

• HP Media Center PCm1095c: update audio driver

  HI guys,.

  I have an old HP Multimedia Center PCm1095c.  I've updated to 4 GB of RAM and Windows 7 Prof 500 GB SSD.  Right now it works but no sound. It seems I need to update driver for Conexant 23880 and 2388 x but I find no download for this.  Any help will be greatly appreciated.

  Manny

  Hi, Manny:

  If you look at the form of the Asus PTGD1 - LA motherboard (there are 3 varieties), they all have onboard Realtek HD Audio.

  http://h22207.www2.HP.com/us-en/document/c00300057

  http://h22207.www2.HP.com/us-en/document/c00196251

  http://h22207.www2.HP.com/us-en/document/c00297771

  Yesterday I gave you the old Realtek AC 97 audio driver because I was the age of the PC-based fishing.

  See if the new audio driver Realtek HD works instead.   Accept the agreement.  Download and install the driver from the 1st on the list (32 ibt).

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• I deleted my audio driver. How can I add a new?

  I deleted my audio driver how can I add a new? It was on windows xp pro.

  Download and install the Audio drivers:

  Visit the computer manufacturer's website and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver and then follow the instructions to install.

• Copy a project and media for the new hard drive

  Greetings,

  I have a very large project stored on an external hard drive and would like to copy the whole thing, including the original media linked to a new hard drive... because I'm afraid that my old one may cease to operate quickly. How can I go on the copy of my project to a new hard disc as well that all sounds, music and video are related?

  Thanks for your help.

  Hello.

  You can create a library of transfer in the user interface and move the top project. (It it will copy as you move it to a new drive)

  If you also move the media, it will break the links between the project and the media (audio and video). When you do that, use the command create a link (on the file menu). If you point to the good volume, it should find the media and offer you the ability to link again.

  Good luck.

  Russ

• Find the Audio driver for HP dc7600 convertible minitowers PC for Win7

  Dear all Member,

  I have two HP dc 7600 and computer in minitour convertible HP dc 7800 PCs, recently I upgraded the old OS win XP of them for the new OS Win 7, I'm looking for drivers for Win7 in here, but until now, I couldn't find the Audio driver for Win 7.

  Some audio that I found them on the web for HP to be compatible with Win7 drivers, but they are unsupported when I installed them on my computer.

  You help me by sending the right link to download the Audio drivers for Win7 on HP dc7600, dc7800?

  Thank you very much.

  Chinh_Ng.

  Hello:

  For the dc7600, the best thing to do is to go to the realtek website and download and install the latest driver for the audio.

  Accept the agreement. Download and install the driver either the 1st or the 2nd on the list depending on whether you have installed W7 32-bit or 64-bit.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  I have a dc7800 CMT and I used the audio driver from the support page and driver and it worked perfectly for me, so I can't help you there.

  I used the one on the link below.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 3459240 & prodNameId = 3459243 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-75954-1

• HP Pavilion g7-2251dx: Windows 10 IDT high definition Audio Driver Bug report.

  OK after upgrading Windows 8.1 for Windows 10 Home (The Free Upgrade) I have noise problems.

  IDT Sound Drivers (IDT High Definition Audio Codec):

  Speakers integrated into the laptop: they its OK but not as they did in point 8.1 of Windows.

  I've tested on the following:

  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.
  
  Turtle Beach headset Z11: they sound like basically no Bass Mono instead of stereo there and The Sound is low even though the volume to 100.

  I've tested on the following:
  Play music (sounded bad)
  Played a Youtube video (sounded bad)
  Played a video that I saved on my PC (sounded bad)
  Played a show or a movie on Netflix (bad sound)
  
  In Windows 8.1 speakers embedded in the laptop and the Turtle Beach headset Z11 resembled stereo and strong (perfect).
  
  The helmet Microphone seems to be working very well.
  
  I plugged my headphones Z11 of Turtle Beach to HP from my sister who still has windows 8.1 and my Turtle Beach Z11 helmet sounded very good.

  I plugged my Z11 of Turtle Beach headset in my other sisters that has Windows 10 HP (she has upgraded to Windows 7) and my Z11 of Turtle Beach headset resembled Mono Stereo Instead of.

  It is also plugged into his ear and they looked like Mono Stereo Instead of.
  
  I tested another helmet my Turtle Beach Headset (This Headset plugs into the USB Port) P11 The Sound is perfect it sounds like stereo and not like Mono.

  However when I spoke into the microphone, I could hear my voice coming through the headset speakers (mainly the hearing talk me)
  -------------------------------------------------------------------------------------------
  Microsoft high definition Audio drivers:

  These major works of Drivers so if you just want to use these drivers:

  Uninstall driver IDT
  Restart your computer
  Next adjustment of Volume and other settings
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on properties
  Now just go through each tab and change what you want to change.

  I only click on the Advanced tab, and then change the default Format for 16-bit platforms, 48000 Hz (DVD quality)
  Because that was what the default Format on Windows 8.1
  I also click on record and change the setting of the microphone 2 listed.

  Speakers integrated into the laptop: they its OK but not as they did in Windows 8.1

  I've tested on the following:
  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.

  Z11 headphones Turtle Beach:

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  The helmet Microphone seems to be working very well.

  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  --------------------------------------------------------------------------------------------
  I tried the sound of setting here is what I tried:

  I uninstalled IDT audio driver I went into Control Panel and uninstalled the IDT Audio driver.

  Then I restarted my computer and I reinstalled the drivers of HP's Windows 8.1.

  After restarting my computer again, I checked to see if everything was back to normal, but it is not yet sounded even.
  
  When I right click on the "speaker" icon and then choose playback devices here is what was posted:
  The top unit is called:
  Its digital display (AMD high definition Audio Device) not connected
  OK, this is Normal.
  
  The central device is called:
  Speaker / device by default HP (IDT High Definition Audio Codec)
  OK, this device is also Normal.
  
  The background feature is called:
  Communication by default communication device Headphones (IDT High Definition Audio Codec)
  OK in Windows 8.1 this device has been disabled by default but in Windows 10 it is activated and listed as default communications device.

  So I thought that if I just disabled it my Turtle Beach P11 helmet would return to normal, but it didn't she sounded still, I even restarted my computer.
  
  OK, so I tried to set the Communications headset as device by default but when I right click and click on set as default device it wouldn't let me.
  
  I then disabled speaker / HP and tried to set it as default device it wouldn't let me.
  
  When I disabled speaker / HP Groove Music said he could not detect an Audio device in order to activate the speaker / HP and people with disabilities
  Helmet of communication.
  ---------------------------------------------------------------------------------------
  My computer is a HP Pavilion 2251dx g7

  Audio ID:

  Computer built-in Laptop speakers:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B
  
  Turtle Beach z11 headphone 3.5 mm Jack:
  Sorry no Audio for this one hardware ID that he doesn't use the same above, I think.
  
  P11 headphones from Turtle Beach USB:
  USB\VID_10F5 & PID_0231 & REV_0100 & MI_00
  USB\VID_10F5 & PID_0231 & MI_00
  
  If you need more info let me know.

  Thanks for reading all of this I hope that soon, there is a Solution.
  ------------------------------------------------------------------------------------------
  A temporary Solution:

  After you have solved the problem by reading through countless messages try every difficulty that none of them I went into Control Panel and he took a glance at the the Dolby Advanced Audio Control Panel now I never tested with this before so far but I was able to fix the Audio questions here is exactly what I did :

  When you use your built-in Laptop speakers or possibly other speakers:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Check Dolby Advanced Audio

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  When you use your headset from Turtle Beach Z11 or possibly other headphones:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Uncheck Dolby Advanced Audio now, your headset should ring loud instead of sound like Mono and stereo and crappy.

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  You need to keep the box checked when you use your built-in Laptop speakers, otherwise they will sound like Mono and crappy.
  
  So basically when you plug in your headphones uncheck the box.
  
  So basically when you disconnect your headset check box.
  
  If you have messed with the implementation in and want to return to the default value:
  Click Advanced settings
  Click on Reset

  IDT Sound Drivers (IDT High Definition Audio Codec):
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on disable
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  Microsoft high definition Audio drivers:
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono
  ----------------------------------------------------------------------------------------
  I'm testing all my games to ensure that the work of games and the sound works.

  I use my temporary Solution to test all the games.

  After resetting my PC the sound worked fine with my temporary Solution.

  Castlevania: Lord of Shadow Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Castlevania: Lord of Shadow 2:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders Pack franchise:
  Darksiders II:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders:

  The sound was great on my Turtle Beach Z11 helmet.

  Deus Ex Human Revolution - Director s Cut:

  Download still can not test it yet.

  The Elder Scrolls IV: Oblivion Game of the Year Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  The Elder Scrolls V: Skyrim legendary Edition:

  The sound was great, but even with my temporary fix the sound on my headset Turtle Beach Z11 was low I actually had to put the Volume slider almost up just to hear everything correctly.

  Fallout New Vegas Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Grand Theft Auto IV: Complete Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Metal Gear Rising statement:

  The sound was great on my Turtle Beach Z11 helmet.

  Soul Murder Suspect:

  The sound was great on my Turtle Beach Z11 helmet.

  Quantum Conundrum:

  The sound was great on my Turtle Beach Z11 helmet.

  Saints Row Franchise ultimate Pack:
  Saints Row 2: download still can not test it yet.

  Saints Row third: download still can not test it yet.

  Saints Row IV:

  The sound was great on my Turtle Beach Z11 helmet.

  Sleeping Dogs final edition:

  Download still can not test it yet

  Thief: Master thief Edition:

  The sound was great on my Turtle Beach Z11 helmet.
  ------------------------------------------------------------------------------------------
  I could not Downgrade from Windows 8.1 because it said that files deleted even if windows.old was still there, so I just did a Reset instead.

  Thanks to my temporary fix Audio problems are gone, but I hope that HP releases new drivers, so I can't use my temporary Solution.

  Also I hope HP or Microsoft releases new drivers for the Synaptics TouchPad so that people can save their settings.

  This has been corrected by James Yerkes on Microsoft Community:

  Open regedit.exe

  Navigate to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Note it's the LOCAL MACHINE, not the CURRENT USER.

  Search for a key in the installation folder called DeleteUserSettingsOnUpgrade

  Double click and change the value to 0

  Now go back in the Panel of Synaptics, put all how you like and restart.

  in any case if someone has problems with Windows 10 Post here and I'll see if I can help you but I recommend resetting your PC in recovery Menu so that most of the problems will be solved then I would install all my drivers from the manufacturer.

  I am currently using window 8.1 1 driver from AMD and HP drivers.
  -------------------------------------------------------------------------------------------------
  This may not work for everyone, but if you have the same laptop and headphones I don't then it should work.

  I posted this as well on Microsoft Community:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-other_settings/Windows-10-IDT-high-defin...

  ---------------------------------------------------------------------------------------------------

  Hey everyone here is an update.

  Since microsoft rolled out updates for windows 10 mainly the updated driver to update I had is no longer using the old methods such as the use of the old HP drivers to this windows 10 drivers working for my laptop then everything works fine.

  I always use drivers from AMD for My APU (CPU and graphics card), but everything else is Microsoft I using Microsoft drivers for the month now and have had no problem.

  I hope that everyone knows success with these drivers.

• Satellite L850 - error message after installing the Realtek Audio driver

  Hi guys.
  I have a Toshiba Satelite L850 PSKG8A-07E001.

  I've upgraded to 8.1 Windows 64 bit

  Toshiba Service Station software advised to update my sound driver 6.0.1.6794 to 6.0.1.7023.

  It says to uninstall the driver installed before you install the new driver.

  I uninstalled 6.0.1.6794. Then I installed 6.0.1.7023 and received the following error.

  * Error code:-5009: 0x8002802b *.
  * Error information: *.
  * > Ctor\ObjectWrapper.cpp (163) *.
  * > Ctor\ObjectWrapper.cpp (402) *.
  * > Kernel\Component.cpp (1163) *.
  * > Kernel\CABFile.cpp (389) *.
  * > SetupDLL\SetupDLL.cpp (1541) *.
  * pAPP: Realtek High definition Audio driver *.
  * PVENDOR:Realtek Semiconductor Corp.*
  * PGUID:f132af7f-7bca-4ede-8a7c-958108fe7dbc *.
  * $11.50.0.42618 *.
  1408.1410* BT_OTHER *@Windows (9200)

  Then I tried to install the old one back and received the following error.

  * Error code:-5009: 0x8002802b *.
  * Error information: *.
  * > Ctor\ObjectWrapper.cpp (163) *.
  * > Ctor\ObjectWrapper.cpp (402) *.
  * > Kernel\Component.cpp (1163) *.
  * > Kernel\CABFile.cpp (389) *.
  * > SetupDLL\SetupDLL.cpp (1541) *.
  * pAPP: Realtek High definition Audio driver *.
  * PVENDOR:Realtek Semiconductor Corp.*
  * PGUID:f132af7f-7bca-4ede-8a7c-958108fe7dbc *.
  * $11.50.0.42618 *.
  1380.1382* BT_OTHER *@Windows (9200)

  Now the original driver was designed for Windows 8. I am now running Windows 8.1.
  The new driver does not work. What should I do?

  I have loged on Toshiba's web page for this laptop downloads. The 6.0.1.7023 driver does not exist.
  Where to find gas station?

  ZEFS.

  > Where to find gas station?
  Good question. My question is: why change something if not necessary?
  In any case, have you tried to remove this driver and install an old?

• Presario 2195US original audio driver freeze all the computer in Win7

  Hello friends!

  I'm new to the forum, and I am here because everything could not solve my problem.

  My Compaq Presario 2195US has an upgrade of RAM 1 GB in total and I installed Win7 on it. In the adaptation of the drivers, everything goes very well with compatibility adjustments and new downloads of drivers for my hardware, but there is no video and audio drivers for win7 - now I'll explain the audio problem:

  I installed the audio driver in XP compatibility mode and the driver installed fine (without adjustment of the installation program compatibility is not identify the sound card) and the manual installation of the driver by pointing devices Manager worked too. When everything seems fine, when some audio is played, during playback of audio, sooner or later the computer freezes absolutely and repeat the short sound of the moment of freezing indefinitely. The sound becomes something like tun-tun-tun-tun-tun-tun-tun-tun-tun with the screen freezes and only a reboot is possible - the mouse does not move and ctrl-alt-del is the same anything.

  I use the computer with his disabled card, but I need to get to work. The problem seems to be something small, but I have no knowledge to edit my audio driver to resolve the issue. In some of these blocks, I saw that when I'm on the windows media player window and clicked on a folder in a window behind it, the computer freezes, but it was just an observation. Gels are independent of the application that I use. The use of the sound card on sort may freeze the computer. I need help hard here and we hope that someone trying to solve. Thank you in advance.

  Hi - Caio-,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your Compaq Presario 2195US Notebook and having Audio problems with Windows 7 drivers. I would go to the Device Manager and do a right click on the audio adapter (if more 1 present I delete them all and restart the computer) in your devices and update the driver manager. Restart the computer and see this help. Here is a downloadthat I found for the audio driver, it is a third party site.

  Hope it will be useful.

  Thank you.

• Yamaha audio driver

  I have a Portege 3480CT.

  My sound does not work.

  I downloaded the latest audio driver and other updates, but I can't get to work. I use uninstall UCX driver and after that I instaled the new driver. Everything is OK, no erros message and no erros in Control Panel, but no noise in Notepad.

  How to clean and install the drive for a correct work?

  Thank you

  Marcos Arino

  Hi Marco,.

  as a first step, it would be good to know what operating system are you using?

  Then I found two possibilities to solve the problem:
  1, when you use XP and updated to SP2, you will need an updated driver

  yacxg.sys 6.13.10.2000 to 6.13.10.2150 with the software synthesizer

  yacxgc.sys 6.13.10.3000 to 6.13.10.3150 without software synthesizer

  2, IF you use W98, you will also need an updated driver version.

  For Windows98SE: Updated YAMAHA AC - XG Sound Ver.5.12.01.2125 driver and apply Windows98SE QFE Q242937.

  Hope this will help you.

  Goodbye Tom

• Option for the old original audio driver on a P6720F?

  I have a computer P6720F (Win 7/64).

  Link...

  http://support.HP.com/us-en/document/c02628244

  Added changes...

  Xigmatek 850 Watt PSU

  NVIDIA GTX 570 HD video card

  My audio system (on board) is the ALC888S-VD with the driver Realtek HD (15/12/2010), Version: 6.0.1.6196 Rev A

  Is there a more available for my HP computer audio driver?

  Can I use the driver for Win 7 HD Realtek 64-bit upgrade (as of 22/06/2012)?

  http://www.Realtek.com.tw/products/productsView.aspx?langid=1 & PFid = 28 & Level = 5 & Conn = 4 & ProdID = 288

  _______________________________________________________
  
  My system: HP Pavilion P6720F
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02628244 & tmp_task = prodinfoCategory & CC = US & DLC = β = en & lc = en & product = 5049516 #N1178 〉

  HP is not a new Realtek audio driver for your computer. However, you can use the Realtek HD Audio Codec Driver on your computer. Just check 'accept', click 'Next' and a download location for the 2nd item on the selection list.

• Satellite A30 - no sound after installing the audio driver

  I've updated the audio driver on my laptop A30 today on the Toshiba site with download of Realtek Semiconductor Corporation, and now the sound does not work. It's my single stereo so I feel really bad. The original driver discs are stored and I'm not very techie so help please...

  Thanks a lot for your time, Phill

  Hi Phill,

  First of all, I would like to check the sound settings in the control panel to make sure that none of them are extinguished, and that "dumb" is not checked. Also check that the volume on the side of your A30 control is enough at full volume.

  In the case where everything is set correctly, I would then reload the driver Realtek of the utility CD and tools of Toshiba. If you do not have access to the CD then you can restore the driver to its original state by selecting the audio device in Device Manager"and roll back driver it.

  If all else fails you should be able to 'restore' your system from the last point before your installation of the new driver restore.

  HTH

• Re: Satellite U400-11 q with Vista has new HARD drive but no recovery disk

  Hello

  Before starting a very important message: I do not usually work with pc... :-) At my work we have an IT Department for our PC :-))

  However, now I have to work privately with a PC / laptop and I need help: I'm sitting in front of a Toshiba Satellite U400-11 q with a HARD drive completely newly formatted and unfortunately WITHOUT recovery CD or DVD!

  So far I managed to format the new HARD drive and put a Windows Vista Home Basic (OEM software) from my old pc on this notebook. However, nothing works again (I want to get into the Internet, etc.).

  So, I now have to put on all the involved drivers as well as drivers TOSHIBA original, right?

  How can I do this? What drivers to I need? Do I have to download all the drivers concerned (total 113) one by one on the Web from Toshiba site?

  ANY help is appreciated as I see myself spend all night in front of the PC...

  Thank you
  M

  For the benefit of mobile work, you need to install all the necessary drivers and tools and utilities.
  Each of them you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  Any substance must be installed according to installation order. Here it is:
  Windows Vista SP1
  Chipset Intel module
  Intel Robson (Intel iMSM Driver)
  Intel Crestline-GM / UMA Driver
  or
  AMD M82XT /M86 driver
  Audio driver Conexant CX20561
  Driver LAN Marvell 8040/8055
  Synaptics Touch Pad Driver
  Conexant Modem driver
  Wireless LAN driver
  Chicony camera software
  Bluetooth Stack for Windows by Toshiba
  CIR Port driver
  TOSHIBA Value Added Package
  TOSHIBA hardware configuration utility
  TOSHIBA supervisor password
  TOSHIBA SD Memory utilities
  AuthenTec AES1610 fingerprint utility
  TOSHIBA ConfigFree
  TOSHIBA Assist
  TOSHIBA Speech System
  CD/DVD Drive Acoustic Silencer
  Toshiba HDD Protection
  TOSHIBA face recognition
  TOSHIBA TRS driver
  Broadcom V2.14.4.0
  HDMI Control Manager
  ProtonPack for Vista

  Install all the stuff on this list. If there is something missing just continue with the next.

  By the way: this machine works perfectly with Win7 32-bit so I highly recommend you to use Win7 instead of Vista.

• How to find the audio driver for HP sleekbook

  Can not find the audio driver for my HP laptop...

  I bought the new elegant book, model no HP. Elegant Pavilion book 15th-b001
  
  After 2-3 months, I found my laptop speakers weren't working and its got very slow. I couldn't do so I kept using headphones.
  recently, I've run the driverpack and accidentally a few update audio driver and voice my laptop has increased incredibly, I was surprised, it was very good,
  
  but now, I've updated my windows 8 to 10 and all the previous driver deleted and voice became too slow as it used to be.,.
  now I run the driverpack 15 which is a more up-to-date version, but they did not update this driver, and always the voice of my laptop is too slow.
  I don't know the exact name of that drivers, how do I know the name of that drivers?
  on the internet, I tried too many drivers audio, high definition, etc., but the result is zero,
  con someone help me about this?

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59802.exe

• Equium A100: Audio driver does not not WinXP

  Hi, when I bought my laptop I had Vista installed on it, I installed win XP, but I had no drivers, but I downloaded Toshiba & Utilities CD tools that have all the drivers for my lapop, everything works well only realtek audio driver does not work correctly when I restart my pc error appears, I made the screenshot of it it maybe you can help me with this problem.

  Here is the link to see srceenshot: http://rstheclan.googlepages.com/error.JPG

  Have you installed the two KBs (knowledge base) of Microsoft before running the installation program driver sound?

  You can try and download the audio drivers manually and give it a reinstall. Not to mention that this error message, play sound in Windows?
  Need drivers, you can find here: http://eu.computers.toshiba-europe.com (Support & downloads)

  Another question. What Service Pack you are using? Always SP2 or SP3 brand new? With the last of them, there are sometimes problems with the realtek sound card drivers.