Yahoo toolbar has lost and can not reinstall because PC think its always there. Anyone?

Similar Questions

• My Yahoo toolbar has disappeared. I tried reinstalling several times but it just doesn't work.

  'My Yahoo Toolbar has disappeared'. I tried reinstalling several times but just, it will not appear in the toolbar space. I looked in the display of the toolbar and it is checked. I tried to uncheck and double check the display of the Yahoo toolbar. No luck. Help, please. I use this toolbar constantly.

  Could be. They are in the middle of the update to their servers at the moment so expect the odd mishap now and again.

  Oh, and could you click on the button 'Resolved' while he takes this thread out of the loop?

  Thank you.

• Web page does not display the toolbar or dashboard and can not resize screen

  I'm unable to decrease the size of the screen when you use the web to display the toolbar tool and dashboard.  I went through different places to try to find a correction, but I can't find what I did accidentally or what the computer did to cause this problem and how to fix it.  Thank you for your help.

  Hi Nancydo,

  What application are you when you mention that you "use the web" and can not see the dashboard and toolbar?

  If you use Safari, the menu bar, are you able to click View > actual size?   Otherwise try file > close all windows in Safari.

  Have you restarted the computer?  Many times this will reset all default settings, including the sizes of windows.

  Also, check system preferences > display and make sure that the option "by default to display" is selected for the resolution.

  The resources below will provide additional information on the preferences of the system in general and the display options of Safari in particular.  Your profile says you are using OS X Lion.  These resources are for OS X Lion of the mountains, but they are very similar.

  On the display of system preferences pane
  https://support.Apple.com/en-us/HT202532

  The basics of the Mac: Safari 6 in OS X Lion mountain
  https://support.Apple.com/en-us/HT202525

  Have a great day!

• TV in Windows Media Center program guide lost and can not keep GMT on clock

  Original title: lost the TV Program Guide in Windows Media Center (clock on PC can not also follow GMT... dunno if they are connected)

  Have lost the TV Program Guide in Windows Media Center (clock on PC can not also follow GMT... dunno if they are connected). Have messed around with all the settings, but can't seem to recover these items.

  Hi Liljools,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. When was the last time that the clock was followed by time?

  4. have you tried to change the settings of the clock to GMT?

  Step 1:

  Try to configure the guide once more and check if it helps. The configuration guide, follow these steps:

  a. on the start screen, navigate to tasks, click settings, click TV, click Guide, and then click Set Up Guide listings.

  b. follow the instructions on the screen to configure the list of Guide for your region.

  c. If you are prompted to select a provider of TV services, and you do not know which one to select, control a recent draft Bill or statement from your TV service provider to find the appropriate information.

  d. the providers listed in Windows Media Center vary according to the Postal Code or ZIP. If the supplier subscribe is not listed for the ZIP or the Postal Code entered, try entering local codes find the appropriate Guide listings.

  Step 2:

  You can also manually download the latest Guide information and check.

  a. on the screen start, navigate to tasks, click settings, click TV, click Guide, and then get latest Guide listings.

  (b) when you are prompted, select Yes to start to download Guide listings. You are notified when the update of the Guide is complete. You can continue to use Windows Media Center and the Guide while new Guide information is being downloaded.

  If the problem persists, you can try to configure the TV signal in Media center and check if it works very well.

  You can check out the link below to learn more about the definition of TV signal in Windows Media Center:

  http://windowshelp.Microsoft.com/Windows/en-us/help/589879da-b5a9-4E8F-b43c-c5eb99290e8d1033.mspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I've recently upgraded to the latest version of Firefox and can not find the command "Restore last session". Anyone know where it is? Thank you

  The upgrade has been in recent weeks.
  I checked the "history" section and do not see the link.

  At the top of the Firefox window, click the button with Firefox, making history (the menu background in Windows XP) and select Restore last Session.

  Ref:

  • Restore previous session - set up when Firefox shows your tabs and the newest windows
  • The menu reference

• iCloud 5.1 fails and can not reinstall after Win10 build 10586

  Yesterday my laptop with Windown 10 Pro N has been updated to build 10586.

  Since then, iCloud connector is broken. No synchronization on Photos etc etc.

  So as usual, I tried the action known as: disconnection from iCloud, Uninstall.

  After uninstalling, I restarted the laptop and downloaded the last connector (5.1.0.34) Apple iCloud.

  Now it start drinking again that he needs the 'Media feature pack "...

  "Ok" I thought... Maybe it was put back by winning 10 build 10586...

  Then downloaded and installed: 'Media feature pack for Windows 10 N and KN for Windows 10 editions' (Windows 10-KB3010081-x 64.msu).

  And indeed, it was not installed so windows installed.

  Restarted again just to be sure...

  Began to reinstall icloud, but always the same question asking missing "Media feature pack".

  I've found this thread: Missing Media Feature Pack Windows 10 x 64 V5.0

  But the answer 'resolved' is not applicable to this situation that there is no 'typical' to 'enable '.

  Someone at - it an idea?

  I'm sure this has to do with Windows 10 build 10586... but I can't solve it.

  Thank you

  MCA

  I found it!   his disorder, but here it is.

  If you have a Windows "N" or "KN" editing (I win 10 Pro N) then you need the "Media Feature Pack" to install the connector to iCloud.

  It is no secret more for most people on this forum.

  But wait what he...

  If you have recently updated your Win 10 to release 1511 build aka 10586, then you need a different version of this "Feature Media Pack".

  So:

  -Win 10 (K) N FRONT 1511 create aka 10586--> you need: https://support.microsoft.com/en-us/kb/3010081

  -Win 10 (K) N AFTER THAT 1511 build aka 10586--> you need https://support.microsoft.com/en-us/kb/3099229

  To make it even more complicated MS made a mistake in naming citation:

  Microsoft:

  Note the installer of this package identifies by error the update as "Feature Pack for Windows (KB3010081)" However, it's the package of correct update for Windows 10 N or Windows 10 KN build 1511.

  Hope that the above explanation will help people with the same question.

  It has helped me

  See you soon,.

  MCA

• Computer turns Off at the start and can not reinstall windows

  Hello, I'm Paul and I * generally * use my mac. At the point where I need my Windows laptop, I can't use! I recently had Windows reinstalled, and after some time, he asked to * automatically install a driver *. Well, which brought an end to the life of my computer. It was the 12' th reinstalling windows. now when it starts, it just turns off. I tried to insert my CD of Windows Vista, but guess what? It says "Windows loading files...". ", and then it shows this screen of Microsoft Corporation loading with the bar and the bars green bit into it. After a little while ago, my computer just turned off! How the _ am I supposed to reinstall Windows (well, actually, install Ubuntu ^. ^) now? I tried it, but:------all else fails.

  Please HELP, it's so sad. I will not buy another Windows computer.

  ~ Paul Côté

  For any problem with reinstall Vista from recovery of the manufacturer support, contact the manufacturer of your laptop.

  This isn't their recovery process, Microsoft

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  To reinstall from a Microsoft Vista DVD:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  To install Ubuntu:

  http://UbuntuForums.org/

  See you soon.

  Mick Murphy - Microsoft partner

• device modem on high definition audio bus driver is lost and can not download it. Means

  This does not allow the CD to play

  Hello

  1. What's happening while you're trying to read a disc?

  2. is it works much earlier?

  3. you get any error message?

  4 have have there been recent changes made on the computer before the show?

  Please follow the steps below and check if that helps.

  Method 1: Run Microsoft Fixit from following link and check.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  You can even try to run the following to fix it and check.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  For more information, see the link:

  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Let us know if it helps!

• Imac for sale and can not reinstall OS without using my id

  I am preparing my old imac for sale and erased the hard disk by following the instructions, and I try to reinstall the factory operating system without having to use my apple i.d. but when I boot using R-command-option, I get the spinny globe and then the thing saying that he made the restoration of the internet, but then it gets to the screen white/grey apple and just gets stuck.  (For more than 2 hours, so STUCK).  Ideas?

  It may be interesting to create a flash drive with the installer of the OS, in this way, you don't need us the recovery partition or restore from the internet.

  http://osxdaily.com/2015/09/30/create-OS-x-El-Capitan-boot-install-drive/

  These use a small tool to have anyway.

• "Out of memory error" - and can not reinstall correctly - Psc 1401

  Hello

  I have somehow all of a sudden started to receive an 'out of memory' error whenever I try to print. So I tried every idea I can find to try to re - install my printer and the software but can't even get that accopmlished without getting "fatal errors". (tried Print doctor, following the troubleshooting report trying to install mode of boot etc..) Anyone encountered this problem recently and found a way to fix it?

  With the help of:

  Printer - PSC 1401 all-in-one

  Windows 7 64 bit

  Recent changes, I did before noticing that this erorr, is that I have installed a new video card and more ram... no idea why this would cause a problem.

  Thanks for any help.

  @HP-CompaqPC, please check your Inbox again private message.

  Here's where you can find the private message Inbox.

  

• I bought photoshop elements 13 and can not install because my computer is 64-bit.  I don't know what to do.

  I bought photoshop elements 13 and tried to install it, but I get an error code 7, and he says I have to install for 64-bit.  I don't know how to do this.

  Download 64-bit here and install it, enter your serial number when asked.

• I downloaded an upgrade to my adobe reader today, and since my search engine yahoo has increased and will not change to google. I have a macbook pro, help please? Anyone know how I can change this back? I tried through my settings but it

  I downloaded an upgrade to my adobe reader today, and since my search engine yahoo has increased and will not change to google. I have a macbook pro, help please? Anyone know how I can change this back? I tried through my settings but it does not work

  Hi Iférouane,

  If you are using Safari as a web browser: -.

  • Open Safari, go to the Safari menu > Preferences > General and set Google as homepage. Then, choose Google as your default search engine.

  If you use Google Chrome as the web browser: -.

  • Open Google Chrome.
  • In the upper right corner of the page, click on the Chrome Chrome menu > settings.
  • In the 'Search' section, select Google from the menu drop down.

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• When I try to take a video with my webcam a message "locked by another application." I do not know and can not find which app has locked.

  When I try to take a video with my webcam a message "locked by another application." I do not know and can not find which app has locked. I can't find anywhere, do anything to solve this problem.

  Hello

  1. which version of the operating system you are using on the computer?
  2. What is the brand and model of the web cam?
  3. don't you make changes on the computer before the show?
  4. is it a built-in or external webcam?

  
  Method 1:
  You can perform a clean boot and check if it helps:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  You can also uninstall all software associated with webcam like yahoo messenger or anything else.
  Then install a unique program for the web camera and check if it works.
  
  Method 3:
  You can also update the latest drivers for the web cam on the manufacturer's Web site and check.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Manually reinstall Windows XP and can not find the product key.

  Manually reinstall Windows XP

  Manually reinstall Windows XP and can not find the product key.
  What to do to replace the product key.

  Where to find your product key
  You can find your Windows product key on the label supplied with the package provided with your copy of Windows. The label can also be on your computer case. Activation of the pairs with your computer, your product key.
  Lost or misplaced product key (certificate of authenticity)

  http://support.Microsoft.com/kb/824433

  How to get a replacement product key?

  To replace a Microsoft product key, you must contact Customer Support and Microsoft. To locate the phone number, visit the following Microsoft Web site:

  http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS

   

  For more information on this topic, visit http://support.microsoft.com/kb/811224

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.