Yellow screen before the splash screen

Similar Questions

• Premiere Pro does not load before the splash screen and the PC unresponsive during loading.

  Hello

  Specifications of the PC:

  NVIDIA GTX 750 Ti

  Processor with Six cores AMD FX-6300

  8.1 Windows Pro 64-bit

  My CC Pro first used to work perfectly fine, until recently.

  I use this program called nvidia Shadoplay to record my office, but on Saturday, January 16th, I noticed that it wasn't working for some strange reason. I tried to load the GeForce experience, which is a bit like a control panel for nvidia graphics cards, but I kept getting a weird error whenever I tried to open it. He said that I had no GeForce installed, so I uninstalled and reinstalled, and I had it working again.

  After that I got this problem resolved, I tried to start Premiere Pro. As soon as I tried to run the program, my entire computer became unresponsive. If I tried to click on something else, it would take up to 1 minute for my computer save the click. The screen Splash Pro first jump upward, but it loads through all the dll and prm files much slower. When it happened first, I tried Ctrl Alt Del my way out of it, but my computer would take 5 minutes to sign up the Task Manager. When I try to end the task, nothing would happen. The only way out he had to manually restart my computer by pressing the power button.

  I tried to look for solutions. I tried to move some files Premiere Pro took longer to load on the desktop, like the ExporterQuickTimeHost, EA SequenceRenderer and ExporterAVI files, but loading still takes a lot of time and my computer no longer met. Then I let it load completely, and it took about 30 minutes before I got and error like this:

  The application failed to initialize properly (0xc000001d)

  
  

  I don't remember the exact error. Then I upgraded my Premiere Pro CC 2014 to 2015 version and I had similar problems. Premiere Pro would always take forever to load, but my PC was a bit more responsive.

  I tried to run Avast and MalwareBytes, but they do not have the virus collection.
  

  
  

  I'd appreciate any help as I could about the problem, so I could get back to the Assembly as soon as possible.

  Hi Lecor,

  Update first Pro CC 2015 (9.2).

  Thank you

  Kevin

• trial version will not run before the splash screen

  I hope someone can help please!
  I downloaded the demo of dreamweaver 8 yesterday and I installed and ran fine. Today, that he will not run in front of the start screen. He stands up and asks if I want to buy or wear on the trial--I take trials and the dreamweaver start screen 8 arrives, and then nothing happens. The program does not start. I uninstalled and reinstalled. I rebooted etc - still no go. The other trial, I downloaded (firestarter) works very well yet.
  I am running windows XP media center edition service pack 2.
  Can anyone help please?

  Yes - it ran fine yesterday.
  I think I found the answer. I searched through the posts here & found someone else with the same question a few months ago.
  For anyone who needs to fix - check out this link - read to the bottom where he talks about problems. I ran the updater.2 and it seems to work OK now.
  http://www.Macromedia.com/cfusion/knowledgebase/index.cfm?id=a3f38dcf
  Thanks for the reply though.

• First CC starts before the splash screen, but Photoshop CC works perfectly.   For Mac.

  I tried to open the report of crash (saved as a word document), but it won't let me.

  Anyone having insight on how I can get this going as soon as possible?

  I would die if that could be fixed very quickly!

  Found the answer!  File of Cuda setting removed from the library!

• T450s startup takes 35 seconds before displaying the splash screen. (wake up 11sec)

  The following are my problems:

  1. when starting the machine, it takes about 35 seconds before the first activity screen (screen of Lenovo). After that, it starts normal.
  2. when waking off mode 'sleep', it takes 11 seconds before I see directed power stop to 'breathe' and wake up the screen.

  It feels like it is a hardware/bios on the issue, as (so far I know) hdd/ssd is accessible only after the bios has loaded and completed its audits of material. When you paste into a bootable usb it starts only flicker after the bios was loaded on the screen.

  Question:
  Anyone have an idea why my laptop waiting so long to start or wake? I don't mind wait a bit, but in 35 seconds + startup time normal is really boring. Especially with the fact that the laptop shows no sign of life for 35 seconds after ignition briefly the backlight on the keyboard. Alarm delay is also very annoying since even my 7 year old laptop BSOD to wake up faster, and I use a lot "sleep" mode.

  Some origins I think about:
  -Verification of the material during the initial start-up of equipment does not yet recognize a dedicated GPU card. (POST: Power On Self Test)
  -I don't think it's a problem with my software because the problems occurs before any media playback.

  I already tried things:
  -Reset the bios.
  -Start in legacy mode.
  -Update the bios
  -rebuild MBR (although I think that's the problem.)
  (- Refreshing installation of windows, even if I do not expect that's the problem.)

  This problem was already at the beginning (with origenal material):
  From the first time I started the laptop (with HARD drive), I noticed that it took a long time to start. I remember repeatedly pressing the button ON / OFF and think I did something wrong, when all of a sudden the 'Lenovo' screen appears.

  I hope someone can help me!

  My problems were solved!

  An engineer contacted me that they received a mainboard replacement and they wanted to make an appointment. I gave them the address where I worked the next day because I'm very mobile, and an engineer came by the next day. It appeared to be a qualified IBM engineer and test my machine and came to the same conclusion as me. He then did some tests to see if the problem was caused by something else, then the motherboard but eventually replace my motherboard with good care.

  After the replacement of the startup time and wake up was normal as it should be. I'm very happy with the service that Lenovo ThinkPad gave me.

  I have to add that when I called for the support that I got someone on the line who couldn't really understand me, neighter, Dutch or English. But it was also duo a bad connection, it seemed to me... But after that call I really didn't expect that it would come to a good end. I then really suppriced isn't 5 days later a Dutch engineer Chief called me for an appointment.

• up the yellow screen in vista after startup

  I write in the name of the customer:

  "no message error but when I turn on the computer it starts normally, but when the screen turns yellow.

  Hello Agent CU V-13elka,.

  Your computer boots into Windows, before seeing a yellow screen?  You see the information from manufacturers on how to start?  I suggest all like Chloe and try to start safe mode.  I have included a link below on how to run last known good configuration with Vista.  Please let us know status.

  Last known good configuration:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

• I no longer see the splash screen

  Hello

  I was wondering if there is a problem?

  When I start my pc, I don't see the initial start up screen (where you see the pc that runs through the quotes - before loading windows) - I wanted to install a card from the PCI (replacing the edge - but can not access the splash screens to turn off the sound of the OB) - is there a problem with my pc? or how to get back this splash screen?

  Thank you

  Check your computer or motherboard - sometimes the boot options Manual
  screen can be hidden, but even if it does not appear you can still access
  the configuration screen of the BIOS by pressing the correct key.

  wrote in message
  News: * e-mail address is removed from the privacy... *

  Hello

  I was wondering if there is a problem?

  When I start my pc I no longer see the initial start up screen (where you)
  See the pc that runs through the quotes - before loading windows) - I
  wanted to install a PCI card (by replacing the embedded one - but may not)
  access to splash screens to turn off the sound of the OB) - is there a problem with
  my pc? or how to get back this splash screen?

  Thank you

• TM2 - Win7 hangs at the splash screen after waking from sleep and hibernation

  I had intermittent problems with the mode 'sleep' on my laptop TM2T-2200 (Windows7 64-bit).  Wake up sleep & put into hibernation, the system will have problems with log-in intermittently.  Generally speaking, I'll be able to move my mouse cursor and enter my password - but pressing enter, the system hangs at the splash screen, requiring a hard - reboot (by pressing the power button).  Sometimes, I've not yet will be able to enter my password before it crashes.

  The problem seems to occur more in energy saving mode, but it occurred in '' HP recommended Mode '' once or twice now, too.  It looks a lot like the problems reported for other models HP here:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DM4-freezes-when-idle-and-after...

  Any suggestions?  Is it possible to know if a particular driver or a program that hangs?

  Update: my problems seem to be associated with protection against malware of Comcast constant guard and disappeared after uninstalling the program.

• Debug build hangs at the splash screen after Update Beta 4

  Since the update of the fall of November, debug builds Dev Alpha hang at the splash screen.

  By release notes, on the basis of known issues:

  "AIR debugger cannot display the IP host dialog box when a debugging session is initiated. This can cause applications to hang at the splash screen and fail to launch. (240219, 242986) »

  A workaround solution is given for people running Flash Builder, where you explicitly give the Debug IP address host instead

  in relying on the auto-discovery.  I use the command line flow (don't have Flash Builder), and my debug builds that were operating out of now drop from September to the start screen. -DebugHost 169.254.0.2, I added to my blackberry-airpackager command and the debug builds always hang.  Release builds signed with my symbolic debugging normally launch, as they did before the update to the decline in November.

  For people who use Flash Builder and who know how to look under the hood and find the blackberry-airpackager command that distributes when you do a debug version: to debug this launch is built successfully

  on a Dev Alpha with the November update, can you please put the blackberry-airpackager command line which

  Flash Builder is running?

  Got a reply from them and they confirmed that the dialogue will be back. Let's make it a part of our test cases in the future.

  See you soon,.

  Dustin

• Remove the splash screen

  Hello

  I'm developing an application, because I don't want the start screen. I have remove the splash screen in the bar discripter file. When running the application, it displays the blank screen before entry in the foreground app. How to remove the white screen.

  Is it possible to run the app with splash screen and blank screen?.

  This is not possible, that the application takes a bit of time to initialize.

  You can check
  http://supportforums.BlackBerry.com/T5/native-development-knowledge/improving-startup-performance-of...
  to see how to improve this time.

• How to make the splash screen to stay for some time the given sum?

  I wanted to keep the splash screen is displayed for say 3-4 seconds before he jumps to the next screen, could someone please suggest me a method to do this?

  Since by default the start screen is displayed for about a fraction of a second.

  I assumed that you do not want the default splash screen to display for longer... it wouldn't be much of that.

  If you have a custom splash screen and wants to appear again, just have your application display a copy of it that the only thing onscreen for the first few seconds, before switching to your main view. The search can show you that there areother threads that have covered the thi

• After downloading an application I see is no longer the splash screen, how can I get rid of the app and restore my pc when I do not see the screen

  After downloading an application I see is no longer the splash screen, how can I get rid of the app and restore my pc when I don't see the screen, please help

  Hello

  Do a system restore to a date before you had this problem:

  "How to make a restore of the system in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/4692-System-Restore-how-do-Windows-8-a.html

  Follow this path to a Safe Mode system restore:

  "5 ways to boot mode safe Windows 8 & Windows 8.1"

  http://www.7tutorials.com/5-ways-boot-safe-mode-Windows-8-Windows-81

  See you soon.

• Upgrade to Indesign CC 2015.5 - does not open and hangs on the splash screen

  I upgraded to CC 2015.5 2015.  After you have installed indesign, it allowed me to open the program once.  After closing the program, any attempt to reopen causes an error pop up during the splash screen that says "Adobe InDesign CC 2015 has stopped working" and leaves the program.  I uninstalled / reinstalled two times with the same results.  Other 2015,5 improvements seem to be fine, only the Indesign program is having issues.  Any advice would be much appreciated on how to fix or revert to the previous version that worked.

  Hi all

  We are aware of the problem where InDesign crashes on launch while working with library files stored on a network location.

  We are working on resolving the issue and for the moment, please try the solution that we have identified.

  To work around the problem, please follow the steps below:

  Clear the Cache InDesign either by renaming the Cache folder or deleting it altogether. (It is best to rename the folder)

  The location of the cache folder: -.

  Windows XP: C:\Documents and Settings\Settings\Application Data\Adobe\InDesign\------\Caches\

  Windows 7 or 10: C:\Users\\AppData\Local\Adobe\InDesign\-\Caches\

  Macintosh: Drive hard/users/InDesign/Library/Caches/Adobe///.

  In addition, if your workflow requires you to work with the (different) library placed on the network, please make sure you close the library panel before leaving InDesign.

  Concerning

  Vineet

  (InDesign engineering team)

• sqldeveloper - 4.0.3.16.84 - x 64 crashes after the splash screen

  I had successfully used my installation of sqldeveloper - 4.0.3.16.84 - x 64 last week. After an update to windows 7 enterprise SP1 crashes after the splash screen and about 10% of the progress bar, until the message saying it is saving the extensions. There is no error or other messages of information displayed. I tried to run from a command window produces no additional information. I deleted the sqldeveloper folder and downloaded a zip file and reinstalled. Same behavior.

  

  The Data Modeler works very well.

  Any suggestions on how to do this problem.

  Hi Andy,.

  If the problem is not with the installation of SQL Developer (which you have unpacked in an empty directory) or find the JDK or having a JDK version that is inappropriate, you should then see if your user settings has been corrupted or (maybe) is somehow became less accessible than before the update of Windows 7 SP1.  These settings can be found under C: \Users\-Appdata\Roaming\SQL Developer\system4.0.3.16.84.

  
  

  Here is a compilation of a few standard tips offered several times before on this forum for this kind of situation:

  1 see if behavior persists after the removal of the settings and restart SQL Developer without migrating settings.

  (Be sure to make a backup (export) of your connections first!)

  2. see if (assuming that (1) does not help) allows to reinstall SQL Developer.

  If the fault cannot be placed on a migration of settings / download / installation corrupt, then we can start to consider...

  3. possible problΦmes with older JDK.

  4 OutOfMemory possible problΦmes that may be hidden by running only no Developer SQL from a command line console.

  5. a new bug.

  So try (1) and (2) If you have not already.  Ignore (3) If you are already using jdk7_u51 or later and are not on a Mac.  Point (4) can be a problem if you have many windows to restore and did not mount the Xmx values in the file product.conf - especially if you use a 64 bit JDK.  And (5), if you have the urge, see...

  http://www.thatjeffsmith.com/archive/2012/06/how-to-collect-Debug-Info-for-Oracle-SQL-Developer/

  And if you want to try (1) in a clean 'sandbox' unaffected by existing directories of user settings, you can always add one

  AddVMOption - Dide.user.dir =

  line to your sqldeveloper.conf file.

  Hope this helps,

  Gary

  SQL development team

  P.S.: And keep in mind that SQL Developer "score" to a specific JDK in 4.0 and above all used the SetJavaHome in the product, conf, rather than sqldeveloper.conf

• AE crashes after the splash screen

  Hi guys,.

  AE (Version 13.6) starting up normally, but after the splash screen, it freezes into a white screen showing just the menu bar. If I delete all the files in the Prefs folder, it works perfectly.

  I upgraded my computer, all the drivers are updated. My graphics card is a GTX 970 and OS is Windows 10.

  Can someone help me, please!

  See you soon

  Contact Adobe support?

  Honestly, this looks like a graphic driver problem. As I said before, a lot of people had problems with them on the latest version of Windows. They would install the driver the most recent, but for some reason, it did not work. 10 windows and NVIDIA are fighting the driver. I did not get around upgrade to Windows 10, so I didn't really look into it enough to hold people solutions came with.