trial version will not run before the splash screen

Similar Questions

• Error 17-Windows will not load past the splash screen, and system repair has no effect...

  Hi all, my problem is the following. Off my laptop the night before, an upgrade has been installed as usual. However, when I tried to start my computer the next day, I was meeting with a choice of operating systems, one was vista and one was something called "openSUSE 11.2 installer (NET).» Of course I wanted to choose vista, but when selected has been sent to a screen that read (sorry for the amount of the entry).

  Start "openSUSE 11.2 installer (NET)".

  (hd, 1)

  Specifien type is ntfs, partition type 0 x 7

  /openSUSe/ kernel linux devfs = mount, dall ramdisk_size = 65536 = ftp install: //ftp4.g wdg.de/pub/opensuse/distribution/SL-OSS-factory/inst-source/ server = ftp4.gwdg.de lang = en splash silent vga = 0x31A

  Error 17: File not found

  I don't know much about this sort of thing, so he thought better to include everything I could. At first, I tried to reload Vista, but it just opened the same screen, so found the vista disc that came with the laptop and it is stuck in. I ran sytem repair and system restore and both have had no effect.

  I'd appreciate any help is sorting this point, but if I have to reinstall vista (what I hear the hard disk wipes), is it possible to backup all my files to be reintergrated later.

  Thanks for any help!

  "Off my laptop the night before, an upgrade has been installed as usual."

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, please include Error Codes, including what you have already posted, andexactly what happens after you tried to update.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Premiere Pro does not load before the splash screen and the PC unresponsive during loading.

  Hello

  Specifications of the PC:

  NVIDIA GTX 750 Ti

  Processor with Six cores AMD FX-6300

  8.1 Windows Pro 64-bit

  My CC Pro first used to work perfectly fine, until recently.

  I use this program called nvidia Shadoplay to record my office, but on Saturday, January 16th, I noticed that it wasn't working for some strange reason. I tried to load the GeForce experience, which is a bit like a control panel for nvidia graphics cards, but I kept getting a weird error whenever I tried to open it. He said that I had no GeForce installed, so I uninstalled and reinstalled, and I had it working again.

  After that I got this problem resolved, I tried to start Premiere Pro. As soon as I tried to run the program, my entire computer became unresponsive. If I tried to click on something else, it would take up to 1 minute for my computer save the click. The screen Splash Pro first jump upward, but it loads through all the dll and prm files much slower. When it happened first, I tried Ctrl Alt Del my way out of it, but my computer would take 5 minutes to sign up the Task Manager. When I try to end the task, nothing would happen. The only way out he had to manually restart my computer by pressing the power button.

  I tried to look for solutions. I tried to move some files Premiere Pro took longer to load on the desktop, like the ExporterQuickTimeHost, EA SequenceRenderer and ExporterAVI files, but loading still takes a lot of time and my computer no longer met. Then I let it load completely, and it took about 30 minutes before I got and error like this:

  The application failed to initialize properly (0xc000001d)

  
  

  I don't remember the exact error. Then I upgraded my Premiere Pro CC 2014 to 2015 version and I had similar problems. Premiere Pro would always take forever to load, but my PC was a bit more responsive.

  I tried to run Avast and MalwareBytes, but they do not have the virus collection.
  

  
  

  I'd appreciate any help as I could about the problem, so I could get back to the Assembly as soon as possible.

  Hi Lecor,

  Update first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Satellite A300 will not get before the start screen

  Hi all

  had a problem with a laptop A300 about 2 to 2.5 years old. I just installed windows 7 prof and it worked fine for about 3 days and then all of a sudden it blocked start.

  He gets to the toshiba start screen and then reboots. He doesn't even try to start windows. You can go into the bios and make changes, etc., you can not press f8 to load in safe mode, only it does not even come to that.
  You can press f12 and raise the start menu and try to boot from the CD but this new fact not work and it just restarts again

  I don't know how else to troubleshoot it. I don't think it's a motherboard problem can you enter the bios.
  It could be a HARD drive problem, but then I thought it would have gave you a warning message of any (no available boot device) and you can see the HARD drive in the bios and would have thought that it would have started at least on a CD.

  The only things I can think about are drive problem HARD for the problem RAM or motherboard problem.
  I think install win 7 to 3 days there is just a huge coincidence?

  Any help would be great. Thank you

  Hi hitenkacha,

  Hmm... Which is really strange, if the laptop restarts after the Toshiba start screen but it doesn t happen if you go into the BIOS or boot menu...
  So, if you go into the BIOS and wait a few minutes, he doesn t restart?

  Yet one thing would be interesting to know: what happens if you try to boot from the recovery disk Toshiba? Generally, it should still possible to boot from this drive if it s ok.

  Check this box!

• Photoshop CC 2015 (Norwegian version) will not start. The following message: Adobe Photoshop CC has stopped working.  A problem caused the program stopped fungeresom correctly. The program will be closed and you will be notified if a solution is av

  Photoshop CC 2015 (Norwegian version) will not start. The following message: Adobe Photoshop CC has stopped working.  A problem caused the program stopped fungeresom correctly. The program will be closed and you will be notified if a solution is available.

  reset your preferences-

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

  If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

• E260 will not go past the opening screen

  I got my 260 E for about a year and later that yesterday I went to turn it on, but it remains on the logon screen. Enter mode 'sleep', but I can't listen to music or find out anything because it will not go beyond the opening screen. The second of 10-15 soft reset I tried a hundred times, but it does not work.

  If remove/insert the battery did not work, the next step would be to format the drive.  You can also try to update the firmware.  I hope that you have a model v1.  What does say on the back of the drive?  Do you see a blue Sansa logo on the splash screen?  If so, you have a model v2 with no recovery mode.

  Assuming you have a v1 with the recovery mode:

  1. Turn off the player.
  2. Slide the key lock (to headphone jack).
  3. Press and hold the RECORD when connecting to the PC.
  4. Output RECORD when the "Welcome to recovery mode" message on the LCD s drive.
  5. Open my computer/Windows explore and see if you can find a new "16 MB - FORMAT" labeled removable flash drive
  6. Right-click on 16 MB-FORMAT and select new folder.
  7. Name the new folder "sansa.fmt" (without the quotes).
  8. Use the remove safely icon in the system tray.
  9. HOLD reset in the unlocked position.
  10. Disconnect the player from the PC.

  The player must, by seeing the folder sansa.fmt in the root directory of the drive, proceed to format itself.  Pay attention to any error/success message see you.  If all goes well, it will tell the full format and then to restart.

  DO NOT TRY TO FORMAT THE VOLUME 16 MB-FORMAT!

  If the format does not work, the next step is to try to update the firmware.  Go to the correct sticky message and download the firmware for your region .24A (assuming that he is a player of v1).  Drag and drop the embedded .mi4 and ROM files of archive of the firmware in the root directory of the 16 MB-FORMAT drive.  Make sure that the files end up in the root directory and not in a subdirectory.  Unplug and restart the player as before.

• Does not load before the Welcome screen

  I get to the sign in screen on vista and I put my password and sign in however it will not load past the loading screen.

  Hello

  What would you say if try you it in safe mode? It will allow you to open a session?

  To access safe mode, press F8 just after the screen logo POST or original system manufacturer and before Windows starts to load. This should give you a boot menu where you can select.

  If you are able to log on successfully in safe mode, you can start the troubleshooting steps described here:http://support.microsoft.com/kb/929135

  If you are not able to connect to any account in safe mode, including the default administrator, please post back with some information about how and when this problem started.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Can't reinstall Vista. Because Vista will not get to the Setup screen.

  Hi people. Got a prob a little. Vista stopped booting the other night. So, I tried safe mode, and it hung on crcdisk.sys. So, I decided to get in shape. Problem is, it will boot from the DVD, but will not load / access the Setup screen (I waited for 7-8 minutes and nothing's happened, shows just the thing with the green bar).

  Not too sure if it's because the hard drive is 1 TB (but Vista was on the same front hdd with Windows 7). I tried to remove the 2 GB of ram (I use 4). No go. Tried another DVD rom, not go. Removed USB devices that have been connected. No go. I know that the DVD itself is fine. I tried on the other PC here, the installation screen came within 2-3 minutes. But his is not a 1 to (its 250 GB) the only DVD that will work / I install is the Windows 7 DVD.  So, how can I reinstall Vista?

  I deleted all partitions / recreated with the Win7 installation as well. Still couldn't get Vista to get to the Setup screen

  Any info appreciated

  Thank you

  Finally fixed it. I read that USB legacy can also cause this. So, I disabled it. Everything is good. Managed to get to the Setup screen, then reinstall Vista

• PC will not boot past the home screen with USB HDD connected?

  Please read the entire post before suggesting a solution.

  Mobo: ASUS P8Z68-V LX, on the latest version of the BIOS.  Eight USB 2.0 ports, two USB 3.0 ports.  Intel i5 CPU. 8 GB of DDR3 RAM. Graphics card is NVIDIA GTS 8800 512, and I have a GTX 960 FTW on the way. Corsair CSX500 PSU.

  Model reader problem: WDBHML0040HAL-RK

  -J' ordered this drive of Studio 4 to WD outside of eBay for $109, used. The drive has been used previously on OS X, and I had planned to use it between two Windows 7, 10 and 10 OS X via dual-boot.
  -Boots PC regularly without the connected reader, but it hangs at the splash screen, if the player is connected to one of my 10 USB ports.
  -I can't not to enter the BIOS with the drive connected, and if I get into the BIOS without connection, BIOS freezes as soon as I make it connect.
  -I went into the BIOS, (with the device / disconnected /), and external hard drives moved to the low boot priority. This had no effect.
  -The PC recognises the drive if it is connected / after start. I can copy files to and from the disk without flaw.
  -When it is received, the disk has been formatted with a face-to-face 200 MB EFI system partition, (I have no background knowledge about it), with the rest ~3.5TB unscathed HFS + space.
  -Immediately, I formatted the partition HFS + and it separated in exFAT and NTFS.
  -Deletion of the EFI partition to command line has no effect.

  Someone online says that this is due to the ASUS P8Z68 trying to boot from the drive and to disable "Legacy USB Support" from the BIOS, but my knowledge of the ways all USB devices are disabled, including keyboards. I am doing a FULL disk formatting and will update the post I have try these solutions.

  I'm really in a bind here, guys. In all, any help is appreciated.

  Solved myself. I went back to the basics:

  The drive is 4 TB and I'm trying to use it as exFAT, for compatibility purposes. exFAT supports up to 2 TB per partition. The solutions are either break the 4 TB drive halfway, or to use the NTFS system.

  For the record, I chose exFAT.

  Marking this question.

• My hp will not go past the blue screen

  I tried everything I can think of.

  Safe mode

  Restore and system recovery

  Cleaning system

  nothing will make me past the blue screen

  Model number G62-244

  Please help me!

  Hello cannary77:

  Sorry your computer broke down. Thanks to updates from Microsoft. Well I see you tried safe mode and couldn't open. I hope you have your recovery disk. It's the time to use them. Just insert the disk and turn on coomputer. If your memory or your hard drive was not damaged it must start the process of full recovery. Follow on screen commands. If you do not have your recovery disk, then you can order them through section of HP computer parts. I hope that this step is all you need. Because if this last resort fails then your computer should be taken for repairs. Maybe just replacing memory chips or the hard drive maybe both.

  Once you fall upwards and re-run. Modify the updater settings to automatically update, but let me pick witch to install. Now manually check you for updater and see if the updates are downloaded. Check only one couple at a time. For some reason when a buch of them settle in once, what is happening. I got lucky when it happpened to me. I could get my computer in safe mode and do a restore from the back. Since I changed my settings it didn't happen.

  Oh if you need send repairs request an estimate may be cheeper to buy new, then tries to fix it. Also check your warranty may still be covered. All HP computers come with one year warranty. Good luck

• Why google chrome will not remain on the start screen

  Well let's go.  When I down load google chrome and place it under windows 8 Start menu and open my email account, it works very well at this point. then when I close my google mail chrome disappears off the coast of my Start menu.   It remains in the Quick Start menu and multiply, here, whenever I chaque fois que j' ouvre open google chrome and open the e-mail.   It just won't stay on the start menu.   Even a bestbuy geekquad tech could not understand it. outside.

  Hi Dale,

  I suggest you to uninstall and reinstall Google Chrome. Then pin Google chrome for the splash screen.

  Follow these steps to uninstall the game.

  a. press the Windows key + X , and then select Control Panel.

  b. Select uninstall a program

  c. Select Google Chrome in the list, and then select Uninstall.

  Now, go back and go through the article to know how to pin to the start screen.

  Has Joust applications, Web sites and more at the beginning

  http://Windows.Microsoft.com/en-us/Windows-8/adding-apps-websites-to-start

  Let us know the results.

• Muse CC 2014 will not go beyond the start screen

  

  This is the error I get when I try to open the Muse. To do this, the splash screen, the small progress bar happens to nearly 90% and this will then appear. What should I do now?

  Hi Brad,

  Have you tried to uninstall and reinstall?

  If this also fails, please create a new account administrator user on your computer. Log on with this new user and trying to install Muse. Please let me know how it goes.

  Kind regards

  Aish

• The trial version will not let me create a PDF file

  I am trying to create a file of cover of book in PDF format. I created the file in Photoshop, but the 'Save AS PDF' function does not create the type of PDF that I need for the publication of a book through IngramSpark. So I downloaded the trial version of Acrobat Pro DC. It will not open a file I have Photoshop Save as PDF. When I save as a Jpeg, it takes me to the subscription, purchase of the page online. Only, I downloaded the demo yesterday, so I should rest 29 days. Help, please. Thank you!

  1 ok, that makes sense. Yes, you can use the preflight in Acrobat Pro to make this conversion.

  2. the sounds as if something went wrong to make the PDF if Acrobat is not yet open. For example, this can happen if you click on save to JPEG, but type .pdf on the name. Am not saying that it happened, but it's an example. Can describe you step by step how you save the PDF of Photoshop, including the choice of that you pull down. Still, sounds as if you may have fixed this.

  3. the two apps: Acrobat Reader - and - Acrobat Pro. It is a potential mine field. Make sure that you recognize that you are running.

• Photoshop trial version does not run on macbook pro system operations

  Hi, I made an update of my macbook pro to alreasy, but still, the trial version of photoshop does not 'on this operating system".

  anyone?

  UH huh... so, exactly what OS are you running? (Hint, it must be 10.7.x or higher)

• Trial version will not convert to cloud

  my software (previously used in trial mode) photoshop request a serial number to continue.  Note the software not used in the trial version is fine.  I uninstalled photoshop and tried to download to the cloud with no luck.  I joined a few days - should I wait instuctions more Adobe?

  Just follow the following steps:

  1. Locate the hosts file.

  2. click on start, run, type "% systemroot % \system32\drivers\etc" and

  and then click OK.

  3. right click on the file * which file he showed there much * and select

  Opened. Select application Notepad open the hosts file * is

  What is called the file? I've not seen it.*

  4. save a backup of the file. Choose file > save as file name

  hosts. Backup and click OK.

  5. search for all entries that refer to activate.adobe.com and remove

  These entries. For example, 127.0.0.1 activate.adobe.com and delete this

  entry.

  6. save the file and close it.

  See you soon

  -LP