YES pre reqs

Hi all

11.2.0.4

RHEL 6.5

I want to install oracle db.

The documents pre-reqs says:

Software requirements

The following maintenance tools must be installed on all machines and their locations specified in the path of the account that is running

Installed and in the path on the account that will own the database.

  • AR
  • CCG
  • g ++
  • ksh
  • LD
  • linux32
  • do
  • X display server

How can I check if I have these software? What is the command to run?

Also, I'm confused what is the use of the name of the database world? Is it really important to qualify? I always do only one name as "orcl" and it works for me.

So I do not often use fully qualified name coz I'm afraid he'll be messed up

Capture.PNG

Can you suggest which is the best way to do it? If I did it alone as in "orcl", how can I change it to the fully qualified name, as in "orcl.ec2.internal"?

Thank you all...

When I run the Setup, I've seen warnings. I already have the shmmax based on oracle documentation. It seems that the installer doesn't? What is the right shmmax is looking for?

I also yum install the pdksh, but it cannot be found. Where can I get? Thank you all

Capture.PNG

Capture.PNG

I do not see pdksh listed as a requirement for RHEL6 (required for RHEL4)

http://docs.Oracle.com/CD/E11882_01/install.112/e47689/pre_install.htm#LADBI1111

Your runInstaller GUI runs in X if you have an X Server (otherwise he would have stopped at startup where it does not check for this).

Hemant K Collette

Tags: Database

Similar Questions

  • OPatch failed during pre-reqs check.

    System:
    WINDOWS 2000

    Database version:
    * 9.2.0.1.0 *.

    opatch version:
    OPatch Version: 1.0.0.0.61

    Version of perl:
    5.005_03


    A patch which I am applying:
    9.2.0.8.0




    STEP: 1
    Downloaded latest version of Metalink opatch:

    D:\Downloads\OPatch > opatch version

    Setup Oracle interim Patch version 1.0.0.0.61
    Copyright (c) 2009 Oracle Corporation. All rights reserved...

    Oracle recommends using the latest version of OPatch
    and read the OPatch documentation in the docs/OPatch
    Directory for its use. For more information on the last OPatch and
    other support issues, please refer to document ID 293369.1
    available on My Oracle Support (https://myoraclesupport.oracle.com)

    OPatch Version: 1.0.0.0.61


    OPatch returns with error code = 0

    D:\Downloads\OPatch >


    STEP 2:

    Downloaded the latest version of fix oracle Metalink.

    D:\Downloads\p8300340_92080_WINNT\8300340 > dir
    Volume in drive D has no label.
    Volume serial number is 201 b - 9310

    Directory of D:\Downloads\p8300340_92080_WINNT\8300340

    2009-04-27 16:07 < DIR >.
    2009-04-27 16:07 < DIR >...
    2009-04-27 14:59 < DIR > custom
    2009-04-27 14:59 < DIR > etc.
    2009-04-27 14:59 < DIR > files
    2009-04-27 14:59 < DIR > ldap_scripts
    2009-04-27 15:13 < DIR > locks
    2009-04-27 16:07 < DIR > OPatch
    2002-04-12 23:46 2 924 patchmd.xml
    2009-04-08 11:43 61 715 README.html
    2007-09-04 10:43 43 README.txt
    28/12/2006 12:35 remove_demo.js 1 545
    4 file (s) on 66 227 bytes
    8 dir 62,529,622,016 bytes free

    D:\Downloads\p8300340_92080_WINNT\8300340 >


    STEP 3:
    Changed the setting oracle_home as follows:

    D:\Downloads\p8300340_92080_WINNT\8300340 > set oracle_home = D:\oracle\ora92New

    STEP 4:
    Inventory control and applying the patch:
    D:\Downloads\OPatch > lsinventory opatch-retail

    Setup Oracle interim Patch version 1.0.0.0.61
    Copyright (c) 2009 Oracle Corporation. All rights reserved...

    Oracle recommends using the latest version of OPatch
    and read the OPatch documentation in the docs/OPatch
    Directory for its use. For more information on the last OPatch and
    other support issues, please refer to document ID 293369.1
    available on My Oracle Support (https://myoraclesupport.oracle.com)

    Oracle home: D:\oracle\ora92New
    Inventory of Oracle Home: D:\Program Files\oracle\inventory
    Inventory Center: D:\Program Files\oracle\inventory
    from: n/d
    YES location: D:\Program Files\Oracle\oui
    YES shared library: D:\Program Files\Oracle\oui\bin\win32\oraInstaller.dll
    Location of Java: "D:\Program Files\Oracle\jre\1.3.1\bin\java.exe".
    Location of the log file: D:\oracle\ora92New/.patch_storage/ < patch ID > / *.log

    Creation of logfile "D:\oracle\ora92new\.patch_storage\LsInventory__05-01-2009_15".
    15 24.log.

    Result:

    VERSION OF THE PRODUCT NAME

    ============ =======

    Queues advanced (AQ) API 9.2.0.1.0
    Replication progress 9.2.0.1.0
    Required agent Support 9.2.0.1.0 files
    Configuration of Apache Oracle Java Server Pages 1.1.2.3.0
    Apache configuration for the XML of Oracle 9.2.0.1.0 Developer Kit
    Apache JServ 1.1.0.0.0g
    Apache Web Server files 1.3.22.0.0a
    Common files Wizard 9.2.0.1.0
    Authentication and encryption 9.2.0.1.0
    Bali hand 1.1.17.0.0
    Duration of BC4J database 9.0.2.692.1
    Capacity Planner 9.2.0.1.0
    Change management common files 9.2.0.1.0
    Character Migration 9.2.0.1.0 utility
    Common files for generic connectivity using OLEDB 9.2.0.1.0
    Common files 9.2.0.1.0 data management services
    Database Configuration Assistant 9.2.0.1.0
    Database SQL Scripts 9.2.0.1.0
    Database upgrade Assistant 9.2.0.1.0
    Database check 9.2.0.1.0 utility
    Workspace Manager 9.2.0.1.0 database
    DBJAVA necessary support files 9.2.0.1.0
    Documentaion required support files 9.2.0.1.0
    Enterprise Edition Options 9.2.0.1.0
    Enterprise login Assistant 9.2.0.1.0
    Company to manage 9.2.0.1.0 translated Web site files
    Base classes of Enterprise Manager 9.2.0.1.0
    Enterprise Manager Client 9.2.0.1.0
    Enterprise Manager Common 9.2.0.1.0 Files
    Enterprise Manager Console 9.2.0.1.0
    Enterprise Manager 9.2.0.1.0 database applications
    Enterprise Manager events 9.2.0.1.0
    Enterprise Manager Expert Common 9.2.0.1.0 Files
    Prior to the Installation of Enterprise Manager checks 9.2.0.1.0
    Enterprise Manager integrates Applications 9.2.0.1.0
    Enterprise Manager minimum integration 9.2.0.1.0
    Common files 9.2.0.1.0 paging Enterprise Manager and WHO
    Enterprise Manager in pagination 9.2.0.1.0 Server
    Enterprise Manager Quick laps 9.2.0.1.0
    Enterprise Manager Shared Libraries 9.2.0.1.0
    Enterprise Manager translated 9.2.0.1.0 files
    Enterprise Manager Web Site 9.2.0.1.0
    Web Enterprise Manager 9.2.0.1.0 integration server
    App Win32 Enterprise Manager translated 9.2.0.1.0 files
    Enterprise Manager Win32 Application Common 9.2.0.1.0 Files
    Enterprise Manager Win32 applications 9.2.0.1.0 bridge
    Expert 9.2.0.1.0
    Import/Export 9.2.0.1.0
    Files common generic connectivity 9.2.0.1.0
    Generic connectivity using ODBC 9.2.0.1.0
    Using OLEDB - FS 9.2.0.1.0 generic connectivity
    Using OLEDB - SQL 9.2.0.1.0 generic connectivity
    Index Tuning Wizard 9.2.0.1.0
    Installation of 9.2.0.1.0 common files
    iSQL * Plus Extension for Windows 9.2.0.1.0
    iSQL * Plus 9.2.0.1.0
    JDBC 9.2.0.1.0 common files
    JDBC/OCI 9.2.0.1.0 common files
    JSDK 2.0.0.0.0d
    Required LDAP Support 9.2.0.1.0 files
    Extensions MIcrosoft SQLServer (TM) 9.2.0.1.0
    9.2.0.1.0 migration utility
    New database ID 9.2.0.1.0
    Object Type translator 9.2.0.1.0
    Oracle for Windows NT 9.2.0.1.0 Administration Assistant
    Oracle Advanced Security 9.2.0.1.0
    Applications 9.2.0.1.0 Oracle Extensions
    Calling C++ Oracle 9.2.0.1.0 interface
    Service of caching of Oracle for Java 2.1.0.0.0a
    Oracle Call Interface (OCI) 9.2.0.1.0
    Oracle Change Management Pack 9.2.0.1.0
    Client Oracle required Support 9.2.0.1.0 files
    Oracle 1.2.1.0.0A Code Editor
    9.2.0.1.0 Oracle COM Automation feature
    Schema common Oracle 9.2.0.1.0 demos
    Complete Starter DSS Server 9.2.0.1.0 Oracle
    Complete Starter OLTP server 9.2.0.1.0 Oracle
    Basic Oracle required Support 9.2.0.1.0 files
    Oracle Data Mining 9.2.0.1.0
    Database Oracle 9.2.0.1.0 demos
    2.2.11.0.0 Oracle database user interface
    9.2.0.1.0 Oracle database utilities
    Forms Server Oracle Developer 9.2.0.1.0 Manager
    9.2.0.1.0 Oracle Diagnostics Pack
    9.2.0.1.0 Oracle Directory Manager
    Display Oracle 9.0.2.0.0 policies
    Services server Oracle 9.2.0.1.0 Dynamics
    Oracle e-Business Management Extensions 9.2.0.1.0
    Agent EMD 9.2.0.1.0 Oracle Extensions
    Oracle Enterprise Manager products 9.2.0.1.0
    Oracle extended Windowing Toolkit 3.4.13.0.0
    Oracle made Extensions 9.2.0.1.0
    Oracle Help For Java 3.2.13.0.0
    Oracle Help For Java 4.1.13.0.0
    Oracle Help for the Web 1.0.7.0.0
    Server Extensions HTTP Oracle 9.2.0.1.0
    9.2.0.1.0 Oracle HTTP Server
    Ice browser Oracle 5.06.8.0.0
    Basic Agent Intelligent Oracle 9.2.0.1.0 component files
    9.2.0.1.0 Oracle intelligent agent configuration tool
    Agent extensions Intelligent Oracle 9.2.0.1.0
    Intelligent Agent Oracle 9.2.0.1.0
    9.2.0.1.0 Oracle interMedia Annotator
    Audio interMedia Oracle 9.2.0.1.0
    Compatibility customer interMedia Oracle 9.2.0.1.0 files
    Oracle interMedia customer Demos 9.2.0.1.0
    InterMedia Oracle 9.2.0.1.0 customer option
    Files common 9.2.0.1.0 Oracle interMedia
    Image 9.2.0.1.0 Oracle interMedia
    Oracle interMedia Java Advanced Imaging 9.2.0.1.0
    Oracle interMedia Java Client 9.2.0.1.0
    Java Media Framework Client 9.2.0.1.0 Oracle InterMedia
    9.2.0.1.0 Oracle interMedia Locator
    InterMedia Oracle 9.2.0.1.0 video
    Oracle interMedia Web Client 9.2.0.1.0
    InterMedia Oracle 9.2.0.1.0
    Oracle Internet Directory common customer 9.2.0.1.0 files
    Oracle Internet Directory 9.2.0.1.0 customer
    Oracle 9.2.0.1.0 Assistant INTYPE file
    Oracle Java 2.0.1.0.0 layout engine
    Oracle Java Server Pages 1.1.3.1.0
    9.2.0.1.0 Oracle Java tools
    JDBC Oracle 9.2.0.1.0 driver development
    Oracle thin JDBC Driver for JDK 1.1 9.2.0.1.0
    Oracle thin JDBC Driver for JDK 1.2 9.2.0.1.0
    Oracle thin JDBC Driver for JDK 1.4 9.2.0.1.0
    Driver Oracle JDBC/OCI JDK 1.1 9.2.0.1.0
    Driver Oracle JDBC/OCI JDK 1.2 9.2.0.1.0
    Driver Oracle JDBC/OCI JDK 1.4 9.2.0.1.0
    Oracle JDBC/OCI Interfaces 9.2.0.1.0
    Oracle extended JFC Windowing Toolkit 4.1.10.0.0
    Oracle JVM 9.2.0.1.0
    Oracle applications 9.2.0.1.0 Oracle Management Pack
    9.2.0.1.0 Oracle Management Server
    Common files for the gateway Message Oracle 9.2.0.1.0
    Oracle PL/SQL Mod Gateway 3.0.9.8.3b
    Oracle Net Configuration Assistant 9.2.0.1.0
    Net Oracle 9.2.0.1.0 integration
    9.2.0.1.0 Oracle Net listener
    Net Oracle 9.2.0.1.0 Manager
    Net Oracle 9.2.0.1.0 required support files
    Net Services 9.2.0.1.0 Oracle
    NET to Oracle 9.2.0.1.0
    Oracle to 9.2.0.4.4 OLE objects
    9.2.0.1.0 Oracle ODBC driver
    OLAP Oracle 9.2.0.1.0 API
    OLAP Oracle 9.2.0.1.0 Cube Viewer
    OLAP Oracle 9.2.0.1.0 MCG Lite
    Sheet 9.2.0.1.0 Oracle OLAP
    Oracle OLAP 9.2.0.1.0
    Oracle Partitioning 9.2.0.1.0
    Perl Oracle 5.00503.0.0.0c interpreter
    Oracle 9.2.0.1.0 Programmer
    Provider for OLE DB 9.2.0.1.0 Oracle
    Microsoft Transaction Server 9.2.0.1.0 Oracle services
    Agent SNMP Oracle 9.2.0.1.0
    Client Oracle SOAP 2.0.0.0.0a
    SOAP for 2.0.0.0.0a of Oracle JServ
    SOAP 2.0.0.0.0a Oracle Server
    Oracle Spatial 9.2.0.1.0
    Oracle SQLJ 9.2.0.1.0
    Starter Server 9.2.0.1.0 Oracle
    Oracle 9.2.0.1.0 text
    Trace of Oracle required Support 9.2.0.1.0 files
    Oracle 9.2.0.1.0 trace
    Pack 9.2.0.1.0 Oracle Tuning
    Oracle UIX 2.0.20.0.0
    Search Ultra Oracle 9.2.0.1.0 common files
    Search Ultra Oracle 9.2.0.1.0 intermediary
    Search Server Ultra Oracle 9.2.0.1.0
    Oracle 9.2.0.1.0 Portfolio Manager
    Interfaces 9.2.0.1.0 Oracle Windows
    9.2.0.1.0 Oracle Workflow Manager
    The XML of Oracle 9.2.0.1.0 Developer Kit
    XML Oracle 9.2.0.1.0 runtime components
    Oracle XML SQL 9.2.0.1.0 utility
    Oracle9i Database 9.2.0.1.0
    Oracle9i Development Kit 9.2.0.1.0
    Oracle9i support 9.2.0.1.0 globalization
    Oracle9i Server 9.2.0.1.0 Syndication
    Oracle9i Windows Documentation 9.2.0.1.0
    Oracle9i 9.2.0.1.0
    Parser generator syntactic necessary support files 9.2.0.1.0
    Performance Manager 9.2.0.1.0
    Embedded PL/SQL gateway 9.2.0.1.0
    PL/SQL required Support 9.2.0.1.0 files
    PL/SQL 9.2.0.1.0
    Platform necessary support files 9.2.0.1.0
    Common files nsqlprep 9.2.0.1.0
    Required precompiler Support 9.2.0.1.0 files
    Required RDBMS Support 9.2.0.1.0 files
    Recovery Manager 9.2.0.1.0
    RegExp 2.0.20.0.0
    Presentation framework 9.2.0.1.0
    Necessary Support 9.2.0.1.0 files
    Secure Socket Layer 9.2.0.1.0
    SQL analyze 9.2.0.1.0
    SQL * Loader 9.2.0.1.0
    SQL * Plus 9.2.0.1.0
    SQLJ DURATION 9.2.0.1.0
    SQLJ translator 9.2.0.1.0
    Monitoring SQLServer 9.2.0.1.0 option
    Required SSL Support 9.2.0.1.0 files
    Sun JDK 9.2.0.1.0 extensions
    Sun JDK 1.3.1.0.1a
    Trace DataViewer 9.2.0.1.0
    Utilities 9.2.0.1.0 common files
    Visigenics ORB 3.4.0.0.0
    Required XDK Support 9.2.0.1.0 files
    XML for C++ 9.2.0.1.0 class generator
    XML for Java 9.2.0.1.0 class generator
    XML Parser for C++ 9.2.0.1.0
    XML Parser for C 9.2.0.1.0
    XML Parser for Java 9.2.0.1.0
    XML Parser for Oracle 9.2.0.1.0 JVM
    XML Parser for PL/SQL 9.2.0.1.0
    XML Transviewer beans 9.2.0.1.0
    Transx XML 9.2.0.1.0
    XML 9.2.0.1.0
    XSQL Servlet 9.2.0.1.0

    There are 220 installed components.

    There is no interim Patch




    OPatch succeeded.
    OPatch returns with error code = 0

    D:\Downloads\OPatch >

    *********************PATCH APPLY**************************
    D:\Downloads\p8300340_92080_WINNT\8300340 > D:\Downloads\OPatch\opatch apply

    Setup Oracle interim Patch version 1.0.0.0.61
    Copyright (c) 2009 Oracle Corporation. All rights reserved...

    Oracle recommends using the latest version of OPatch
    and read the OPatch documentation in the docs/OPatch
    Directory for its use. For more information on the last OPatch and
    other support issues, please refer to document ID 293369.1
    available on My Oracle Support (https://myoraclesupport.oracle.com)

    Oracle home: D:\oracle\ora92New
    Inventory of Oracle Home: D:\Program Files\oracle\inventory
    Inventory Center: D:\Program Files\oracle\inventory
    from: n/d
    YES location: D:\Program Files\Oracle\oui
    YES shared library: D:\Program Files\Oracle\oui\bin\win32\oraInstaller.dll
    Location of Java: "D:\Program Files\Oracle\jre\1.3.1\bin\java.exe".
    Location of the log file: D:\oracle\ora92New/.patch_storage/ < patch ID > / *.log

    Creation of logfile "D:\oracle\ora92new\.patch_storage\8300340\Apply_8300340_05-".
    "- 2009_15 - 14 - 00.log.

    SKIPPING_COMPONENT = Oracle.emprod.oemagent.base_oemagent, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.P2K.oo4o, 9.2.0.7.0
    SKIPPING_COMPONENT = Oracle.P2K.OleDb, 9.2.0.7.0

    MISSING_COMPONENT: oracle.rsf.rdbms_rsf, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.RSF.net_rsf, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.RDBMS, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.RDBMS.sqlplus, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.Xml.TransView, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.Cartridges.Context, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.options.intermedia.JAI, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.Cartridges.Locator, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.ISearch.is_common, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.ISearch.Server, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.RSF.oracore_rsf, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.java.JavaVM.javatools, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.RSF.ldap_rsf, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.RSF.xdk_rsf, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.OID.client_common, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.RSF.nlsrtl_rsf, 9.2.0.8.0
    SKIPPING_COMPONENT = Oracle.ntoramts, 9.2.0.8.0

    This House of Oracle has no components/versions required by the patch.

    ERROR: OPatch failed during pre-reqs check.
    OPatch returns with error code = 150

    D:\Downloads\p8300340_92080_WINNT\8300340 >

    Database version:
    * 9.2.0.1.0 *.

    A patch which I am applying:
    9.2.0.8.0

    You must be on 9.2.0.8 (4547809) to apply this hotfix.

    Check the patch readme for more information file and the pre - req for required for this patch.

  • Error in pre-reqs EBS R12

    Hi all

    EBS R12.1

    RHEL6

    I was born notes Doc-ID 761566.1 or 1330701.1

    to install fees or charges clone on a new server.

    The two notes are similar to pre-reqs

    The E-Business Suite pre-installation RPM includes all required above RPM and dependencies for running the application and database levels.

    see the "E-Business Suite RPM pre-installation" section below for more details.


    I ran the ff to install any pre-reqs:

    # cd /etc/yum.repos.d

    # wget http://public-yum.Oracle.com/public-yum-OL6.repo

    # yum install oracle-ebs-Server-R12-preinstall

    But in the end yum install, I get the following error:

    (76/81): unixODBC - 2.2.14 - 14.el6.x86_64.rpm | 377 Ko 00:00

    (77/81): unixODBC-devel - 2.2.14 - 14.el6.i686.rpm |  53KO 00:00

    (78/81): util-linux-ng - 2.17.2 - 12.18.0.1.el6.x86_64.rpm | 1.6 MB 00:00

    (79/81): xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.0.2.i386.rpm | 270KO 00:00

    (80/81): xorg - x 11-utils-7, 5 - 6.el6.x86_64.rpm |  94 Ko 00:00

    (81/81): xorg - x 11-xauth - 1.0.2 - 7.1.el6.x86_64.rpm |  34KO 00:00

    ----------------------------------------------------------------------------------------------

    Total                                                         3.8 MB/s |  MB 91 00:23

    WARNING: rpmts_HdrFromFdno: header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY

    Get the key to file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle

    GPG key retrieval failed: [Errno 14] could not open/read file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle





    Also for yum install > oracle-RDBMS-server-11 GR 2 - preinstall.x86_64

    Summary of the operation

    =======================================================================================================================

    Install the package of 20 (s)

    6 upgrade package

    Total size: 56 M

    Download size: 18 k

    Is this ok [y/N]: y

    Download packages:

    Oracle-RDBMS-Server-11gR2-preinstall-1.0-12.EL6.x86_64.rpm |  18KO 00:00

    WARNING: rpmts_HdrFromFdno: header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY

    Get the key to file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle

    GPG key retrieval failed: [Errno 14] could not open/read file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle

    Help, please...

    Thank you very much

    JC

    Please see (Oracle Linux 6 "yum" command fails with "GPG key recovery has failed" (Doc ID 1604867.1)).

    Thank you

    Hussein

  • Pre - Req courses before registering for the workshop course for certification VCP5-VTC (confusion)

    Dear all,

    I intend to attend examinations VCP5-VTC and all through vmware site I found to attend this certification, must complete one of the courses of training to get the pre - req certificate. One of the pre - req given on the site is "Trouble Shooting Workshop", when I checked the details for this course, it is said below pre - req.

    Prerequisites include completion of one of the following:

    • VMware® Certified Professional 5 - virtualization data center (VCP5-VTC)

    • VMware vSphere: Fast Track [V5.1]

    • VMware vSphere: optimize and scale [V5.1]

    Administration and knowledge equivalent • experience with ESXi and vCenter Server

    Experience with the work on the command line is strongly recommended

    I need to know if I'm not VCP5-VTC and also did not attend the Fast Track or optimize and scale, I can't save for the course of the workshop? I must firstly fill Fast Track OR optimize and only then I'd register myself in over course "Workshop" scaling?

    Please specify.

    Kind regards

    Technically, anyone can book themselves on the workshop, but the advanced/content issues are not really suitable for those who meet these prerequisites listed - those who do not know how what is fast track and Optimize classes & scale would have difficulty with the workshop.

    You don't HAVE to be a VCP5 VTC either, but if you are then you will be at a level equivalent to a person who did the FT/O & S classes - that's why certification is listed as an alternative condition, as well as the "equivalent knowledge and experience.

  • That is - this pre - req checker... How reliable is it?

    Hello

    I'm trying to build on the server for vCAC 5.2 and execution before requisition checker all the Red Cross have been fixed only with IIS, I'm frustrated. No matter how many times I turn off of <>- the authentication method to change checker.

    However if disable any authentication method, the status of IISServer goes red with messages that none of the authentication method is enabled. If I enable Windows authentication (which is really required or active), IIS server Red Cross changes checkmark green but get nothing change to the other of the Red Cross.

    Recross.JPG

    Be frustrated I checked the Configration file that this auditor seems to actually change the status. Surporsingly I found all the required parameters are saved in the Configuration file.

    annonymous.JPG

    windows.JPG

    I do not understand if they are well recorded then why does not check showing green status?

    Is this auditor really trust for such control action? >

    I'm just now frustrated and tried to do the same step for the last hours.

    Need help Frédéric

    Thanks in advance

    BR,

    MG

    According to me, the pre - req check tool seeks the settings in the registry, and if you set windows authentication, leave the default values for the advanced settings and information about the provider, although correct, is not updated everything that seeks the auditor.

    To fix:

    1. Go to the IIS default website services manager
    2. Authentication
    3. Authentication Windows, advanced settings
      1. Set extended protection to something besides off, uncheck the box enable kernel-mode, press OK
      2. Return to the advanced settings, back of extended protection set to off, and check enable kernel mode, press OK
    4. Authentication Windows, providers
      1. Remove Negotiate, NTLM, click OK
      2. Return to suppliers, add Negotiate and NTLM, click OK
    5. Re-run the auditor of the pre - req, should show Green
  • Updates OME needs a lot more pre-reqs?

    Hello

    I have v1.1.0.6063 OME installed from a previous test phase.

    I would like to go and live and do some updates, I thought it would be a good idea to update OME and DRM.

    Running the install request pre-reqs OME much more than before (the roles of IIS, MS silverlight, Visual Studio)

    Is it just me, or previous versions did not require this?

    It would be detrimental to use the old version OME?

    I would rather not install these programs / roles, which will make security hardening more a problem than before.

    Thank you

    Hello

    Later versions of the OME need some accessories more before than the old version, but there is no threat of sercurity because of this. The required ports are listed in the support matrix. These pre accessories are required for installation only

  • What are the pre-reqs for 12 c that install additional WHO?

    Can we list all of the pre-reqs for additional installation of OMS.

    Thank you

    Hello

    Prerequisite useful
    ============
    1 the source and target machine operating system must match whose architecture
    Example: If the source computer is 32-bit linux then target machine must be 32-bit linux
    2 operating system users must be the same on the source and target, including the user ID and group ID machine
    For example: Consider SGD is installed using the user oracle on the source machine, oracle user belongs to the oinstall group. On the source machine, if the oracle user id is 500 and 501 oinstall group id is then on the target machine, create user with UID 500 oracle and oracle user must belong to the group with gid oinstall (501)
    3. check if all the necessary packages are installed on the target computer
    4 software library must be configured on the source computers and target at the same place by the same user
    Example: on the source machine, if the software library is configured on/u01/swlib by oracle user and then on the destination machine, software library must be configured on/u01/swlib by oracle user only
    5. / tmp directory on the source computer is used for temporary storage, it must have a minimum of 5 GB of space
    6. on the source and target computers, anywhere performing custom with minimum of 4 GB of space is required. These custom locations staged are used during the process of cloning as temporary storage location
    7. before starting the additional installation of SGD, agent must be installed on the target computer
    8. the agent must be rising and running on the target computer, the upload should be allowed
    9. ensure the target host machine is shown as upward in 12 c Cloud Control

    Best regards
    Vincent

  • 11 GR 2 customer pre - req semmni fails

    Oracle 11 GR 2 client on RHEL 4 x 86 installation and prereq for semmni fails to recognize the value of Linux. The value is:
    1001 Semele >/sbin/sysctl - a | grep sem
    kernel.SEM = 256 32000 100 150
    and this has been defined in the file /etc/sysctl.conf and Linux sees this value. The YES program tells value expected value 0 and 128. I managed to install the client on another Linux server with the same basic trouble-free installation. For some reason any Oracle is not read the semmni value.

    Any suggestions?

    Thank you

    Curt Swartzlander
    [email protected]

    Hello Ozark,

    Very strange, configure semaphores is only for the installation of the database is not for customer installations.

    In the documentation for the Oracle Client installation can't find this step in the validation of the pre-requisites of semaphores.

    Put here the Setup log.

    Kind regards
    Levi Pereira
    Please close your message when you get the solution to your problem.

    Check the answers answer 'useful' or 'right' answer which will help others with the same problem.

    Thank you for doing your part to make this community as valuable as possible for everyone!

  • HP_UNIX pre-reqs for reimplementation of 12.1.1

    Hi all

    What are the pre-requsite HP_UNIX OS. We go for the new implementation of R12. All documents or metalink id would be very appreciated.

    And also we will for the implementation of the finance Module, then what would be the patches to be applied on the R12.

    Thanks in advance

    Concerning

    Published by: user9024375 on January 27, 2010 21:35

    Hello

    What are the pre-requsite HP_UNIX OS. We go for the new implementation of R12. All documents or metalink id would be very appreciated.

    Please see these documents.

    Note: 762894.1 - Oracle Applications Installation Notes version upgrade 12 (12.1.1) for HP - UX PA - RISC (64-bit)
    Note: 762891.1 - Installation of Oracle and Applications 12 (12.1.1) for HP - UX Itanium upgrade version Notes

    And also we will for the implementation of the finance Module, then what would be the patches to be applied on the R12.

    Refer to these documents.

    Note: 557869.1 - EBS: R12 Oracle Financials critical patches
    Note: 244040.1 - Oracle eBusiness Suite patches recommended for performance

    You can also find the latest available families of My Oracle Support site (on the patches & Updates tab to date).

    Kind regards
    Hussein

  • I tried to install the Exchange management tools 2010 for Windows 7 Pro x 64. When it comes to check the pre - req, it always fails with this error:

    "Cannot load Windows PowerShell Microsoft.PowerShell.Security snap-in due to the following error: could not load file or assembly 'file:///C:\Windows\System 32\WindowsPowerShell\v1.0\Microsoft.PowerShell.Security.dll' or one of its dependencies." The system cannot find the specified file. »

    I checked the path specified and the file is not located there, however, watching another installation of windows 7, the file is missing from this situation as well, but works very well.

    Since PowerShell V2 is already installed, of course it cannot be reinstalled.  I tried to run a repair with the DVD of Windows 7, but as it is patched SP1, the original disc does not work.  Nor will re-apply the Service Pack.

    About abandoned on the installation of exchange tools and will likely be on a different computer, but would be nice to have powershell works again.

    Hello
     
    The question you posted would be better suited in the TechNet Forums. I suggest you post your question in the Exchange Server 2010 Forum.
  • Agent deployment of MS 12.1.0.2 to pre - req Linux by the agent checks

    Deploying the agent software from EM to a Linux host running Oracle Enterprise Linux version 5.8 I am one of the sine qua non default check which indicates that the root / does not belong to the root. Since the Setup log

    INFO: --------------------------------------------------------------------------------
    INFO: Checking AgentBaseDirCheck
    It is a prerequisite to check if the agent home directory belongs to the user to install, all parent directories belong either installation user or root user and the root directory (i.e. "/") is the property of the root user.
    INFO: The value of AGENT_BASE_DIR is: / opt/EM_Agent.
    INFO: The value of ORACLE_HOME is:/opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0
    INFO: The command get executed under this prereq is:/opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0/perl/bin/perl /opt/EM_Agent/ADATMP_2012-12-10_09-37-31-AM/prereq_stage/core/12.1.0.2.0/sysman/install/CheckDirPermission.pl/opt/EM_Agent
    NEWS: Check the appropriate property on the base directory of the agent.
    INFO: Check if the base directory of the agent is owned by the oracle user agent and that its parent directory is owned by the agent user or root.
    INFO:...
    INFO: User name is: oracle & file owner is: oracle
    INFO:...
    INFO: ERROR: the root directory is not owned by the root user.
    INFO: The full version. The result of this review is: failure of < < < <

    INFO: --------------------------------------------------------------------------------

    Don't know how the / can not be owned by the root.

    Size of filesystem used Avail use % mounted on
    / dev/map/VolGroup00-LogVol00
    220G 63 146 G 30%.
    / dev/sda1 99M 23 M 72 M 24% / Boot
    tmpfs 2.0 G 620 M 1.4 G 32% / dev/shm


    [Mapper root@tomintoul] # ls - al
    Total 0
    drwxr-xr-x 2 root root 100 4 Dec 11:42.
    drwxr-xr-x 13 root root 7180 Dec 10 06:59...
    CRW - 1 root root 10, 62 4 Dec 11:42 control
    BRW - rw - 1 root disk 253, Dec 4 0 11:42 VolGroup00-LogVol00
    BRW - rw - 1 root disk 253, 1 Dec 4 11:42 LogVol01 VolGroup00


    Any help would be appreciated.

    Hello

    Please follow the provided below document that explains the problem.

    EM 12: Agent Installation fails with the error "the root directory is not owned by root user" (Doc ID 1380296.1)

    Kind regards
    Vincent

  • 11.1.1.1.4 WebCenter installation. Pre - req UCM.

    Hello

    on oracle download page http://www.oracle.com/technetwork/middleware/webcenter/downloads/index.html
    We can see that the University Complutense of MADRID is now required for the installation of the WebCenter. However, I couldn't find any documentation of oracle saying that. I found that in this download page.

    What are the components we should install the UCM? Does create a domain at the Complutense University of MADRID or just extend the field of wc?
    I have this kind of doubts...

    Please, could someone guide me through this?

    Thanks in advance,

    Jonas Zanon

    Indeed, the Complutense University of MADRID is not really necessary. If you will not use the document services that you don't need to install Complutense University of MADRID.
    You can read my post on installing webcenter from scratch: http://www.yonaweb.be/installing_webcenter_11g_ps3_scratch
    He described all the steps needed to install and start webcenter with all required services. Optional services such as the Complutense University of MADRID are not installed in this post, so you can see what it takes.

    If you plan to use the AAU with webcenter, you can first install webcenter and install UCM. If you have already created a webcenter area that you can easily extend the field of webcenter.

  • Patch 8362391 pre-Reqs

    Hi Hussein.

    I have the following prerequisite patches to '8362391'.
    Is it possible to merge them into a pack of cigarettes so that it will be easier for me to apply them all?


    '4291053',
    '3218526',
    '3854951',
    '3761838',
    '4206794',
    '4216942',
    '4393740',
    '4608023',
    '6064563',
    '5610530',
    '5527236',
    '7172682',
    '4355172',
    '6603716',
    '4946700',
    '6642331',
    '5400654',
    '4665900',
    '4651420',
    '5923665',
    '4635071',
    '6360253',
    '4649626',
    '5024341',
    '5647736',
    '7429271',
    '6975727',
    '3315676',
    '7660107',
    '5452096',
    '4676589',
    '5739724',
    '8403254',
    '8362391'

    Thank you very much

    MsK

    Hello

    Please see these discussions/links.

    Merger of patches
    Merger of patches

    Maintain all Documentation Oracle Applications
    http://www.Oracle.com/technology/documentation/applications.html

    Kind regards
    Hussein

  • install OEM agent 10.2.0.4 - pre - req fails: regional settings

    Friends,

    We are trying to install a 10.2.0.4 on AIX 5.1 OEM agent.
    Just at the moment where we get to 90% complete, we get an error about "local".

    When I checked the log file for the InstallActions, I find hundreds of errors related to:

    [INFO: ld: 0711-251 SERIOUS ERROR: symbol of the 17 in object oracle/product/agent10g/lib/libpls10.a[ociextp.o table entry]:
    Field n_offset contains 1726349312. Valid values are between 4 and 381.
    [LD: 0711-251 SERIOUS ERROR: symbol of the 17 in object oracle/product/agent10g/lib/libpls10.a[ociextp.o table entry]:
    Field n_offset contains 1726349312. Valid values are between 4 and 381.

    Then, at the end of the log, I see:

    INFO: End of the generated process exit.
    INFO: ----------------------------------
    INFO: Exception thrown from action: do
    Exception name: MakefileException
    Exception string: error in the call to target 'itnsping nnfgt.o mkldflags client_sharedlib' of makefile ' / oracle/product/agent10g /.
    Network/lib/ins_net_client. MK'. See ' / home/oracle/oraInventory/logs/installActions2009-04-14_01-41-51PM.log' for details.
    The exception severity: 1


    Any ideas where I should start looking?

    Thank you...

    We are trying to install a 10.2.0.4 on AIX 5.1 OEM agent.

    I don't think that this is supported.

    I guess, you install 10.2.0.1(Still non pris en charge), since there is no 10.2.0.4 full installer.

    Oracle Enterprise Manager 10g Grid Control Certification Checker
    https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=412431.1

    Please read this note for certifications
    .

  • Pre-reqs for cartridge AD

    Hello

    I am planning to put in place the AD and Exchange carts and I noticed one of the prereqs is to install the patch 203455 for 2003 DC. Anyone know where I can get this fix? When I search the support site for microsoft for this fix it returns no results. Anyone know how old this fix? Has he perhaps rolled into a service pack at some point and that's why I find it? Do a Google search for "203455 fix" returns only article Quest edocs and technet for kb203455 in the search returns zero results.

    http://eDOCS.quest.com/Foglight/558/files/CartridgeForActiveDirectory_ReleaseNotes.html

    Thank you

    Ryan

    Ryan,

    My apologies, it seems that the release notes for Exchange has better details pointing to microsoft KB article

    203455 patch must be installed on domain controllers Windows 2003 specified in the properties of a stockbroker. Without this fix, queries on the Win32_PerfFormattedData_NTDS_NTDS class on Windows Server 2003 domain controllers fails with the error 80041010 0 x. After you install the hotfix, run "wmiadap.exe /f" at the command line to update WMI. See http://support.microsoft.com/kb/941084.

    Reach.

    http://support.Microsoft.com/kb/941084

    When you open the page they have a

    Available hotfix download
    View and request hotfix downloads

    What points you demand to fix

    http://support.Microsoft.com/hotfix/KBHotfix.aspx?kbnum=941084&kbln=en-us

    Show hotfixes for all platforms and languages (33) View additional information

    Select Product Language Platform Release Fix name Version Build Size of the file (bytes) Date to update the
    Windows Server 2003 English x 64 SP3 Fix203455

    It asks you your e-mail address.

    Golan

Maybe you are looking for

  • The percentage of my iphone 6s is incorrect

    Hello At about 23:00 16/03/2016 Viet Nam time at the farm level is 20% of my iphone6s, I charge the battery. 17/03/2016 00:00 then I have check and see the battery level is 24%, this anomaly occurred after updating iOS 9.2.1. Even when I remove all t

  • Protection of files on a T61?

  • Update messenger

    I get the windows live essentials 2011 updated and now I can't use my Messenger

  • HP Pavilion p6-2356

    I bought a HP Pavilion Desktop computer model: P6 - 2356 IN the city of Chennai, State of Tamil Nadu in India on 29 June 2013.  It surprised me that the CPU containing the box had no CD software of Windows 8.  My question is, in case the computer bec

  • Presario CQ57 with 2 gig Ram is slow

    I can not any work done this PC takes forever to load and display the pages, I did the thing check virus, currently Nortaon is installed. Is 2 gig the problem I need more memory? I use for businesses only. Chrome and other programs report hig memory