Similar Questions

• That is - this pre - req checker... How reliable is it?

  Hello

  I'm trying to build on the server for vCAC 5.2 and execution before requisition checker all the Red Cross have been fixed only with IIS, I'm frustrated. No matter how many times I turn off of <>- the authentication method to change checker.

  However if disable any authentication method, the status of IISServer goes red with messages that none of the authentication method is enabled. If I enable Windows authentication (which is really required or active), IIS server Red Cross changes checkmark green but get nothing change to the other of the Red Cross.

  

  Be frustrated I checked the Configration file that this auditor seems to actually change the status. Surporsingly I found all the required parameters are saved in the Configuration file.

  

  

  I do not understand if they are well recorded then why does not check showing green status?

  Is this auditor really trust for such control action? >

  I'm just now frustrated and tried to do the same step for the last hours.

  Need help Frédéric

  Thanks in advance

  BR,

  MG

  According to me, the pre - req check tool seeks the settings in the registry, and if you set windows authentication, leave the default values for the advanced settings and information about the provider, although correct, is not updated everything that seeks the auditor.

  To fix:

  1. Go to the IIS default website services manager
  2. Authentication
  3. Authentication Windows, advanced settings
     1. Set extended protection to something besides off, uncheck the box enable kernel-mode, press OK
     2. Return to the advanced settings, back of extended protection set to off, and check enable kernel mode, press OK
  4. Authentication Windows, providers
     1. Remove Negotiate, NTLM, click OK
     2. Return to suppliers, add Negotiate and NTLM, click OK
  5. Re-run the auditor of the pre - req, should show Green

• YES-67075: could not load the patch object &amp; YES - 67073:OPatch failed: PatchObject constructor

  Hi Experts,

  I am really evil with Opatch following error... any suggestions would be very appreciated.  ! Thank you!

  am version of database upgrade R12.1.1 Vision of 11.1.0.7 for 11 GR 2 following this Doc.
  Doc-ID 1585578.1 (Interoperability notes Oracle EBS R12 with Oracle Database 11 g 2 (11.2.0.3) )

  and I checked this as understanding OPatch tool and patch [1451669.1 ID]!

  After you apply the patches on apps and db level pre-installation and Installation of 11.2.0.3 home.

  When I tried to apply the Patch getting following error. Also, I can't apply any Opatch or Patch DB with each Patch am getting the same error

  [oracle@ebs 14229857] $ /11.2.0.3/OPatch/opatch apply
  Setup Oracle interim Patch version 11.2.0.3.6
  Copyright (c) 2013, Oracle Corporation.  All rights reserved.
  
  
  Oracle homepage: /11.2.0.3
  Inventory Center: / oracle/oraInventory
  from: /11.2.0.3/oraInst.loc
  OPatch version: 11.2.0.3.6
  YES version: 11.2.0.3.0
  Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
  
  Could not load the patch object.  Possible causes are:
  The specified path is not an intermediary shiphome Patch
  Metadata files are missing in the region of patch
  Patch location = / oracle/14229857
  Details = PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
  
  OPatch failed: PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
  Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
  
  OPatch failed with the error code 73
  
  

  even if the patch 6880880 is successfully applied to the updated version OPtach also I set the Path variable for export PATH = $ORACLE_HOME/OPatch: $PATH

  There is no problem with the permissions on files and directories. as I have cross checked.

  /oracle/VIS/db/tech_st/11.2.0.3/OPatch/opatch lsinventory-details
  Setup Oracle interim Patch version 11.2.0.3.6
  Copyright (c) 2013, Oracle Corporation.  All rights reserved.

  
  Oracle homepage: /11.2.0.3
  Inventory Center: / oracle/oraInventory
  from: /11.2.0.3/oraInst.loc
  OPatch version: 11.2.0.3.6
  YES version: 11.2.0.3.0
  Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_19-26-02PM_1.log

  Location of the output file Lsinventory: /11.2.0.3/cfgtoollogs/opatch/lsinv/lsinventory2014-05-08_19-26-02PM.txt

  --------------------------------------------------------------------------------
  Installed products of higher level (2):

  Oracle Database 11g 11.2.0.3.0
  Oracle Database 11 g examples 11.2.0.3.0
  There are 2 product (s) installed in the home of Oracle.

  
  Here are the details of Patch Log!
  
  YES location: /11.2.0.3/oui
  Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
  [May 8, 2014 18:58:59]     History of patch file: /11.2.0.3/cfgtoollogs/opatch/opatch_history.txt
  [May 8, 2014 18:58:59]     From ApplySession Thu May 08 18:58:59 IST 2014
  [May 8, 2014 18:58:59]     Starting apply Session at Thu May 08 18:58:59 IST 2014
  [May 8, 2014 18:58:59]     YES-67075: cannot load the patch object.  Possible causes are:
  The specified path is not an intermediary shiphome Patch
  Metadata files are missing in the region of patch
  Patch location = / oracle/14229857
  Details = PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
  [May 8, 2014 18:58:59]     OPatch will clean the files 'restore.sh, make.txt' and "backup cars, scratch," directories.
  You will always be able to restore patches after this cleaning.
  Do you want? [y | n]
  [May 8, 2014 18:59:02]     Y (auto-répondu by - silence)
  [May 8, 2014 18:59:02]     The user responded with: Y
  [May 8, 2014 18:59:02]     Size of the directory "/11.2.0.3/.patch_storage"before cleaning is 269296 bytes. "
  [May 8, 2014 18:59:02]     Size of the directory "/11.2.0.3/.patch_storage"after the cleaning is 269296 bytes. "
  [May 8, 2014 18:59:02]     UtilSession: Save for the restoration area was cleaned. For a complete list of files/directories
  removed, please see the log file.
  [May 8, 2014 18:59:02]     YES - 67073:OPatch failed: PatchObject manufacturer: Input file ' / oracle/14229857/etc/config/actions "or" / oracle/14229857/etc/config/inventory "does not exist.
  [May 8, 2014 18:59:02]     YES - 67035:System is intact, OPatch will not restore the system
  [May 8, 2014 18:59:02]     Finishing ApplySession at Fri May 08 18:59:02 IST 2014
  [May 8, 2014 18:59:02]     Total time spent waiting for user input is 0 seconds.  End at Thu May 08 18:59:02 IST 2014
  [May 8, 2014 18:59:02]     Location of the log file: /11.2.0.3/cfgtoollogs/opatch/opatch2014-05-08_18-58-59PM_1.log
  [May 8, 2014 18:59:02]     Description of the battery: java.lang.RuntimeException: PatchObject manufacturer: Input file "/ oracle/14229857/etc/config/actions" or "/ oracle/14229857/etc/config/inventory" does not exist.
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.PatchObject.createPatchObject(PatchObject.java:2433)
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.PatchObject. < init > (PatchObject.java:2000)
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.PatchObjectUtil.loadPatch(PatchObjectUtil.java:2188)
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.ApplySession.loadAndInitPatchObject(ApplySession.java:1553)
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:5850)
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:2060)
  [May 8, 2014 18:59:02]     StackTrace: oracle.opatch.OPatch.main(OPatch.java:614)
  ~

  Thank you

  Priya

  Priya,

  You try to apply (Patch 14229857)? If so, it's for Exadata then is it applicable?

  11.2.0.3 patch # is 10404530

  11 GR 2 11.2.0.3 database certified with E-Business Suite

  https://blogs.Oracle.com/stevenChan/entry/11gr2_11_2_0_3

  Please note that 11.2.0.4 is the Group of hotfixes later certified 11 GR 2.

  11.2.0.4 database certified with E-Business Suite

  https://blogs.Oracle.com/stevenChan/entry/11_2_0_4_database

  Thank you

  Hussein

• What are the pre-reqs for 12 c that install additional WHO?

  Can we list all of the pre-reqs for additional installation of OMS.
  
  Thank you

  Hello

  Prerequisite useful
  ============
  1 the source and target machine operating system must match whose architecture
  Example: If the source computer is 32-bit linux then target machine must be 32-bit linux
  2 operating system users must be the same on the source and target, including the user ID and group ID machine
  For example: Consider SGD is installed using the user oracle on the source machine, oracle user belongs to the oinstall group. On the source machine, if the oracle user id is 500 and 501 oinstall group id is then on the target machine, create user with UID 500 oracle and oracle user must belong to the group with gid oinstall (501)
  3. check if all the necessary packages are installed on the target computer
  4 software library must be configured on the source computers and target at the same place by the same user
  Example: on the source machine, if the software library is configured on/u01/swlib by oracle user and then on the destination machine, software library must be configured on/u01/swlib by oracle user only
  5. / tmp directory on the source computer is used for temporary storage, it must have a minimum of 5 GB of space
  6. on the source and target computers, anywhere performing custom with minimum of 4 GB of space is required. These custom locations staged are used during the process of cloning as temporary storage location
  7. before starting the additional installation of SGD, agent must be installed on the target computer
  8. the agent must be rising and running on the target computer, the upload should be allowed
  9. ensure the target host machine is shown as upward in 12 c Cloud Control

  Best regards
  Vincent

• New installation fails during the expansion of the files Windows 7 Pro

  Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.

  Motherboard: MSI MPower Max
  CPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)
  RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHz
  SSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)
  HARD drive: Seagate 750 G 7200 RPM SATA II
  Video: EVGA GeForce GT 2 640 GB
  Case: Corsair 400R
  Power supply: Corsair TX650M
  CPU cooler: H80i
  DVD: HP, BluRay BD R/W drive
  OS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)
  CPU Temp is around 42 C.

  If Memtest86 fails then you need to get into the BIOS and set the RAM timing.  Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory.  Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.

  As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.

  =============================================================

  It's the set of test utilities that I use on every new system that I'm building.

  Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of HDD sank medium over the past 18 months.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ============================ SSD Test Software =============================

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Life of the SSD: http://ssd-life.com/

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  = Once Windows installed =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  CrystalDiskInfo:
  http://CrystalMark.info/software/index-e.html
  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
  Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Node simple database pre-installation checks running for 2 hours.

  Not having my first install Oracle EBS on a concert of 16 16 VM drivers, due to the lack of sufficient space on file system, I added a new 900 GB virtual drive and rose to /d01 with lots of reading permanent writing on a BONE 7 OEL.

  Failed to install previous pre-installation check relatively quickly (10 minutes or more), but this control of pre-installation worked for 2 hours now, with no updates.

  ---------------------------

  .........

  Mid-range host ping was successful

  command: / bin/ping - c 1 host - 1.skytap.example.

  PING host - 1.skytap.example (127.0.0.1) 56 (84) bytes of data.

  64 bytes of the host - 1.skytap.example (127.0.0.1): icmp_seq = 1 ttl = 64 time = 0.062 ms

  -Home - 1.skytap.example - ping statistics--

  1 packets transmitted, received 1, 0% packet loss, time 0ms s

  RTT min/avg/max/leg = 0.062/0.062/0.062/0.000 ms

  Mid-range host domain Ping was successful

  Check complete.

  Checks of preinstallation of database

  These controls may take a few minutes...

  --------------------------------------

  The computer is allocate mem and CPU for the gnome, java and the Xorg process, but I expect to see an update now.

  Is there a log somewhere that will tell me if he actively done something or if it is stuck?

  Is there a protocol suitable for wiping system before you try a new installation of a new rest area?

  Is there a log somewhere that will tell me if he actively done something or if it is stuck?

  Is there a protocol suitable for wiping system before you try a new installation of a new rest area?

  What is a 12.2 installation? If so, you should find the details on doing RapidWiz in $TMP //in the .log file - Rapid troubleshooting install for E-Business Suite version 12.2 (Doc ID 1378579.1)

  Thank you

  Hussein

• Error in pre-reqs EBS R12

  Hi all

  EBS R12.1

  RHEL6

  I was born notes Doc-ID 761566.1 or 1330701.1

  to install fees or charges clone on a new server.

  The two notes are similar to pre-reqs

  The E-Business Suite pre-installation RPM includes all required above RPM and dependencies for running the application and database levels.

  see the "E-Business Suite RPM pre-installation" section below for more details.

  
  

  I ran the ff to install any pre-reqs:

  # cd /etc/yum.repos.d

  # wget http://public-yum.Oracle.com/public-yum-OL6.repo

  # yum install oracle-ebs-Server-R12-preinstall

  But in the end yum install, I get the following error:

  (76/81): unixODBC - 2.2.14 - 14.el6.x86_64.rpm | 377 Ko 00:00

  (77/81): unixODBC-devel - 2.2.14 - 14.el6.i686.rpm |  53KO 00:00

  (78/81): util-linux-ng - 2.17.2 - 12.18.0.1.el6.x86_64.rpm | 1.6 MB 00:00

  (79/81): xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.0.2.i386.rpm | 270KO 00:00

  (80/81): xorg - x 11-utils-7, 5 - 6.el6.x86_64.rpm |  94 Ko 00:00

  (81/81): xorg - x 11-xauth - 1.0.2 - 7.1.el6.x86_64.rpm |  34KO 00:00

  ----------------------------------------------------------------------------------------------

  Total                                                         3.8 MB/s |  MB 91 00:23

  WARNING: rpmts_HdrFromFdno: header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY

  Get the key to file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle

  GPG key retrieval failed: [Errno 14] could not open/read file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle

  
  

  
  

  
  

  
  

  Also for yum install > oracle-RDBMS-server-11 GR 2 - preinstall.x86_64
  

  Summary of the operation

  =======================================================================================================================

  Install the package of 20 (s)

  6 upgrade package

  Total size: 56 M

  Download size: 18 k

  Is this ok [y/N]: y

  Download packages:

  Oracle-RDBMS-Server-11gR2-preinstall-1.0-12.EL6.x86_64.rpm |  18KO 00:00

  WARNING: rpmts_HdrFromFdno: header V3 RSA/SHA256 Signature, key ID ec551f03: NOKEY

  Get the key to file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle

  GPG key retrieval failed: [Errno 14] could not open/read file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle

  Help, please...

  Thank you very much

  JC

  Please see (Oracle Linux 6 "yum" command fails with "GPG key recovery has failed" (Doc ID 1604867.1)).

  Thank you

  Hussein

• Failure of the load of the inventory... OPatch failed to load the inventory for the Home.OPatch Oracle data failed with the error code = 73

  Hello

  I will apply patch bundle and my oracle database 11.2.0.2 and Microsoft Windows x 86 platform. As read the file Readme Oracle recommends to use OPatch utility version 11.2.0.1.3 or later. To check the inventory availability I use the command lsinventory % ORACLE_HOME%/OPatch/opatch.

  It ended to give details below.

  Citing O 11.2 patch .0.1.1

  OPatch could not create/open history for writing file: * my home oracle path***\cfgtoollogs\opatch\opatch_history.txt

  **ORACLE_HOME***\cfgtoollogs\opatch\opatch_history.txt (access is denied)

  Setup Oracle interim Patch version 11.2.0.1.1

  Copyright (c) 2009, Oracle Corporation.  All rights reserved.

  OPatch could open the log file, the recording is not possible

  Home Oracle: *.

  Inventory Center: C:\Program Files\Oracle\Inventory

  from: n/a

  OPatch version: 11.2.0.1.1

  YES version: 11.2.0.2.0

  YES location: * ORACLE_HOME * \oui

  Location of the log file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log

  History of patch file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt

  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.

  LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 -.

  09_16-27 - 49 PM .txt

  OPatch failed with error code = 73

  Can someone please help me solve this problem?

  Do I need to install the last opatch utility?

  Hello

  This error message " LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 - .

  09_16-27 - 49 PM .txt "

  indicates that you have a permission problem with your file systems: cfgtoollogs/ORACLE_HOME/opatch

  Check the owner of this file system.

  Kind regards

• ins-20802 - assistant configuration net oracle failed during installation - centos 7

  Hello I'm trying to follow the Manual for installation of the Oracle 12 c. In fact it was already installed on the machine and then uninstalled.

  During installiation, I get the error "[ins 20802] oracle net configuration assistant has failed during installation" window. And the proposed detailed log file, where I can see:

  INFO: No arguments to pass to stdin
  INFO: ... GenericInternalPlugIn: starting read loop.
  INFO: Read: 
  WARNING: Skipping line: 
  INFO: End of argument passing to stdin
  INFO: Read: Parsing command line arguments:
  WARNING: Skipping line: Parsing command line arguments:
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:     Parameter "orahome" = /u01/app/oracle/product/12.1.0/db_1
  WARNING: Skipping line:     Parameter "orahome" = /u01/app/oracle/product/12.1.0/db_1
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:     Parameter "orahnam" = OraDB12Home1
  WARNING: Skipping line:     Parameter "orahnam" = OraDB12Home1
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:     Parameter "instype" = typical
  WARNING: Skipping line:     Parameter "instype" = typical
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:     Parameter "inscomp" = client,oraclenet,javavm,server,ano
  WARNING: Skipping line:     Parameter "inscomp" = client,oraclenet,javavm,server,ano
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:     Parameter "insprtcl" = tcp
  WARNING: Skipping line:     Parameter "insprtcl" = tcp
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:     Parameter "cfg" = local
  WARNING: Skipping line:     Parameter "cfg" = local
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:     Parameter "authadp" = NO_VALUE
  WARNING: Skipping line:     Parameter "authadp" = NO_VALUE
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:     Parameter "responsefile" = /u01/app/oracle/product/12.1.0/db_1/network/install/netca_typ.rsp
  WARNING: Skipping line:     Parameter "responsefile" = /u01/app/oracle/product/12.1.0/db_1/network/install/netca_typ.rsp
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:     Parameter "silent" = true
  WARNING: Skipping line:     Parameter "silent" = true
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:     Parameter "ouiinternal" = true
  WARNING: Skipping line:     Parameter "ouiinternal" = true
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read: Done parsing command line arguments.
  WARNING: Skipping line: Done parsing command line arguments.
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read: Oracle Net Services Configuration:
  WARNING: Skipping line: Oracle Net Services Configuration:
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read: Profile configuration complete.
  WARNING: Skipping line: Profile configuration complete.
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read: Oracle Net Listener Startup:
  WARNING: Skipping line: Oracle Net Listener Startup:
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:     Running Listener Control: 
  WARNING: Skipping line:     Running Listener Control: 
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:       /u01/app/oracle/product/12.1.0/db_1/bin/lsnrctl start LISTENER
  WARNING: Skipping line:       /u01/app/oracle/product/12.1.0/db_1/bin/lsnrctl start LISTENER
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:     Listener Control complete.
  WARNING: Skipping line:     Listener Control complete.
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read:     Listener start failed.
  WARNING: Skipping line:     Listener start failed.
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read: Check the trace file for details: /u01/app/oracle/cfgtoollogs/netca/trace_OraDB12Home1-1504033PM3901.log
  WARNING: Skipping line: Check the trace file for details: /u01/app/oracle/cfgtoollogs/netca/trace_OraDB12Home1-1504033PM3901.log
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Read: Oracle Net Services configuration failed.  The exit code is 1
  WARNING: Skipping line: Oracle Net Services configuration failed.  The exit code is 1
  INFO: Exceeded the number of arguments passed to stdin. CurrentCount:1 Total args:0
  INFO: Completed Plugin named: Oracle Net Configuration Assistant
  

  Years the corresponding trace_OraDB12Home1-1504033 PM 3901 .log:

  [main] [ 2015-04-03 15:39:06.735 MSK ] [HAUtils.getCurrentOracleHome:593]  Oracle home from system property: /u01/app/oracle/product/12.1.0/db_1
  [main] [ 2015-04-03 15:39:06.735 MSK ] [HAUtils.getConfiguredGridHome:1343]  ----- Getting CRS HOME ----
  [main] [ 2015-04-03 15:39:06.737 MSK ] [UnixSystem.getCRSHome:2878]  olrFileName = /etc/oracle/olr.loc
  [main] [ 2015-04-03 15:39:06.795 MSK ] [HAUtils.getHASHome:1500]  Failed to get HAS home.
  PRCI-1144 : Failed to retrieve Oracle Grid Infrastructure home path
  PRKC-1144 : File "/etc/oracle/olr.loc" not found.
  [main] [ 2015-04-03 15:39:06.795 MSK ] [InitialSetup.checkHAConfiguration:4808]  HA Server is NOT configured.
  [main] [ 2015-04-03 15:39:06.797 MSK ] [NetCAResponseFile.<init>:75]  Response file initialized: /u01/app/oracle/product/12.1.0/db_1/network/install/netca_typ.rsp
  [main] [ 2015-04-03 15:39:06.798 MSK ] [NetCAResponseFile.getInstalledComponents:114]  Installed components from response file: server, net8, javavm
  [main] [ 2015-04-03 15:39:06.798 MSK ] [NetCAResponseFile.getVirtualHost:171]  Virtual Host from response file: null
  [main] [ 2015-04-03 15:39:06.799 MSK ] [SilentConfigure.performSilentConfigure:198]  Typical profile configuration.
  [main] [ 2015-04-03 15:39:06.801 MSK ] [ConfigureProfile.setProfileParam:140]  Setting NAMES.DIRECTORY_PATH: (TNSNAMES, EZCONNECT)
  [main] [ 2015-04-03 15:39:06.802 MSK ] [SilentConfigure.performSilentConfigure:206]  Typical listener configuration.
  [main] [ 2015-04-03 15:39:06.839 MSK ] [ConfigureListener.isHASConfigured:1596]  Calling SRVM api to check if Oracle Restart is configured ...
  [main] [ 2015-04-03 15:39:06.840 MSK ] [HAUtils.getCurrentOracleHome:593]  Oracle home from system property: /u01/app/oracle/product/12.1.0/db_1
  [main] [ 2015-04-03 15:39:06.840 MSK ] [HAUtils.getConfiguredGridHome:1343]  ----- Getting CRS HOME ----
  [main] [ 2015-04-03 15:39:06.840 MSK ] [UnixSystem.getCRSHome:2878]  olrFileName = /etc/oracle/olr.loc
  [main] [ 2015-04-03 15:39:06.841 MSK ] [HAUtils.getHASHome:1500]  Failed to get HAS home.
  PRCI-1144 : Failed to retrieve Oracle Grid Infrastructure home path
  PRKC-1144 : File "/etc/oracle/olr.loc" not found.
  [main] [ 2015-04-03 15:39:06.841 MSK ] [ConfigureListener.isHASConfigured:1607]  Is Oracle Restart configured: false
  [main] [ 2015-04-03 15:39:06.841 MSK ] [ConfigureListener.isHASRunning:1636]  Is Oracle Restart running: false
  [main] [ 2015-04-03 15:39:06.842 MSK ] [ConfigureListener.listenerExists:396]  Is listener "LISTENER" already exists: false
  [main] [ 2015-04-03 15:39:06.842 MSK ] [ConfigureListener.typicalConfigure:257]  Checking for free port in range: 1521-1540
  [main] [ 2015-04-03 15:39:06.842 MSK ] [ConfigureListener.validateEndPoint:1059]  Validating end-point: TCP:1521
  [main] [ 2015-04-03 15:39:06.944 MSK ] [ConfigureListener.isPortFree:1131]  Checking if port 1521 is free on local machine...
  [main] [ 2015-04-03 15:39:06.945 MSK ] [ConfigureListener.isPortFree:1146]  InetAddress.getByName(127.0.0.1): /127.0.0.1
  [main] [ 2015-04-03 15:39:06.945 MSK ] [ConfigureListener.isPortFree:1148]  Local host IP address: localhost.localdomain/127.0.0.1
  [main] [ 2015-04-03 15:39:06.945 MSK ] [ConfigureListener.isPortFree:1150]  Local host name: localhost.localdomain
  [main] [ 2015-04-03 15:39:06.945 MSK ] [ConfigureListener.isPortFree:1166]  IP Address: localhost.localdomain/127.0.0.1, Is IPv6 Address: false
  [main] [ 2015-04-03 15:39:06.946 MSK ] [ConfigureListener.isPortFree:1169]  IP Address: localhost.localdomain/127.0.0.1, Is Link-Local Address: false
  [main] [ 2015-04-03 15:39:06.946 MSK ] [ConfigureListener.isPortFree:1194]  Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/127.0.0.1
  [main] [ 2015-04-03 15:39:06.968 MSK ] [ConfigureListener.isPortFree:1197]  Created ServerSocket successfully.
  [main] [ 2015-04-03 15:39:06.968 MSK ] [ConfigureListener.isPortFree:1166]  IP Address: localhost.localdomain/0:0:0:0:0:0:0:1, Is IPv6 Address: true
  [main] [ 2015-04-03 15:39:06.968 MSK ] [ConfigureListener.isPortFree:1169]  IP Address: localhost.localdomain/0:0:0:0:0:0:0:1, Is Link-Local Address: false
  [main] [ 2015-04-03 15:39:06.968 MSK ] [ConfigureListener.isPortFree:1194]  Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/0:0:0:0:0:0:0:1
  [main] [ 2015-04-03 15:39:06.969 MSK ] [ConfigureListener.isPortFree:1197]  Created ServerSocket successfully.
  [main] [ 2015-04-03 15:39:06.969 MSK ] [ConfigureListener.isPortFree:1209]  Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
  [main] [ 2015-04-03 15:39:06.969 MSK ] [ConfigureListener.isPortFree:1213]  Created ServerSocket successfully.
  [main] [ 2015-04-03 15:39:06.969 MSK ] [ConfigureListener.isPortFree:1219]  Creating ServerSocket on Port:1521
  [main] [ 2015-04-03 15:39:06.970 MSK ] [ConfigureListener.isPortFree:1222]  Created ServerSocket successfully.
  [main] [ 2015-04-03 15:39:06.970 MSK ] [ConfigureListener.isPortFree:1242]  Returning is Port 1521 free: true
  [main] [ 2015-04-03 15:39:06.970 MSK ] [ConfigureListener.validateEndPoint:1114]  Validation...Complete for TCP/TCPS.
  [main] [ 2015-04-03 15:39:06.970 MSK ] [ConfigureListener.typicalConfigure:274]  Using port: 1521
  [main] [ 2015-04-03 15:39:08.684 MSK ] [ConfigureListener.isPortFree:1131]  Checking if port 1521 is free on local machine...
  [main] [ 2015-04-03 15:39:08.685 MSK ] [ConfigureListener.isPortFree:1146]  InetAddress.getByName(127.0.0.1): /127.0.0.1
  [main] [ 2015-04-03 15:39:08.686 MSK ] [ConfigureListener.isPortFree:1148]  Local host IP address: localhost.localdomain/127.0.0.1
  [main] [ 2015-04-03 15:39:08.686 MSK ] [ConfigureListener.isPortFree:1150]  Local host name: localhost.localdomain
  [main] [ 2015-04-03 15:39:08.687 MSK ] [ConfigureListener.isPortFree:1166]  IP Address: localhost.localdomain/127.0.0.1, Is IPv6 Address: false
  [main] [ 2015-04-03 15:39:08.687 MSK ] [ConfigureListener.isPortFree:1169]  IP Address: localhost.localdomain/127.0.0.1, Is Link-Local Address: false
  [main] [ 2015-04-03 15:39:08.687 MSK ] [ConfigureListener.isPortFree:1194]  Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/127.0.0.1
  [main] [ 2015-04-03 15:39:08.688 MSK ] [ConfigureListener.isPortFree:1197]  Created ServerSocket successfully.
  [main] [ 2015-04-03 15:39:08.688 MSK ] [ConfigureListener.isPortFree:1166]  IP Address: localhost.localdomain/0:0:0:0:0:0:0:1, Is IPv6 Address: true
  [main] [ 2015-04-03 15:39:08.689 MSK ] [ConfigureListener.isPortFree:1169]  IP Address: localhost.localdomain/0:0:0:0:0:0:0:1, Is Link-Local Address: false
  [main] [ 2015-04-03 15:39:08.689 MSK ] [ConfigureListener.isPortFree:1194]  Creating ServerSocket on Port:1521, IP Address: localhost.localdomain/0:0:0:0:0:0:0:1
  [main] [ 2015-04-03 15:39:08.689 MSK ] [ConfigureListener.isPortFree:1197]  Created ServerSocket successfully.
  [main] [ 2015-04-03 15:39:08.690 MSK ] [ConfigureListener.isPortFree:1209]  Creating ServerSocket on Port:1521, Local IP Address: /127.0.0.1
  [main] [ 2015-04-03 15:39:08.690 MSK ] [ConfigureListener.isPortFree:1213]  Created ServerSocket successfully.
  [main] [ 2015-04-03 15:39:08.691 MSK ] [ConfigureListener.isPortFree:1219]  Creating ServerSocket on Port:1521
  [main] [ 2015-04-03 15:39:08.691 MSK ] [ConfigureListener.isPortFree:1222]  Created ServerSocket successfully.
  

  Problem is perhaps because:

  PRCI-1144 : Failed to retrieve Oracle Grid Infrastructure home path 
  PRKC-1144 : File "/etc/oracle/olr.loc" not found.
  

  All the ideas I'm watercraft evil and how to finally install the Oracle?

  I found the reason for this exception. If someone will face the same problem just create/etc/oracle folder and give it permissions 777. For me, it helped.

• YES pre reqs

  Hi all

  11.2.0.4

  RHEL 6.5

  I want to install oracle db.

  The documents pre-reqs says:

  Software requirements

  The following maintenance tools must be installed on all machines and their locations specified in the path of the account that is running

  Installed and in the path on the account that will own the database.

  • AR
  • CCG
  • g ++
  • ksh
  • LD
  • linux32
  • do
  • X display server

  How can I check if I have these software? What is the command to run?

  Also, I'm confused what is the use of the name of the database world? Is it really important to qualify? I always do only one name as "orcl" and it works for me.

  So I do not often use fully qualified name coz I'm afraid he'll be messed up

  

  Can you suggest which is the best way to do it? If I did it alone as in "orcl", how can I change it to the fully qualified name, as in "orcl.ec2.internal"?

  Thank you all...

  When I run the Setup, I've seen warnings. I already have the shmmax based on oracle documentation. It seems that the installer doesn't? What is the right shmmax is looking for?

  I also yum install the pdksh, but it cannot be found. Where can I get? Thank you all

  

  

  I do not see pdksh listed as a requirement for RHEL6 (required for RHEL4)

  http://docs.Oracle.com/CD/E11882_01/install.112/e47689/pre_install.htm#LADBI1111

  Your runInstaller GUI runs in X if you have an X Server (otherwise he would have stopped at startup where it does not check for this).

  Hemant K Collette

• "opatch" failed when applying "PSU 16083653" to grid infrastructure home.

  Hello

  ENV: Oracle Grid below 11 GR 2 (11.2.0.3) on OEL 5.8 32-bit

  I installed grid Infrastructure 11 GR 2 (11.2.0.3) on the server of OEL 32-bit ('Software Only' option).

  I applied PSU 16083653 IM home. I downloaded the last OPatch and when I check the opatch version, here is what I get:

  [oracle@srvm58-1 OPatch_32bit] $ $ORACLE_HOME/OPatch/opatch version

  OPatch Version: 11.2.0.3.6

  OPatch succeeded.

  [oracle@srvm58-1 OPatch] $ $ORACLE_HOME/OPatch/opatch lsinventory

  Setup Oracle interim Patch version 11.2.0.3.6

  Copyright (c) 2013, Oracle Corporation.  All rights reserved.

  Oracle home: /u01/app/11.2.0.3/grid

  Inventory Center: / u01/app/oracle/oraInventory

  from: /u01/app/11.2.0.3/grid/oraInst.loc

  OPatch version: 11.2.0.3.6

  YES version: 11.2.0.3.0

  Location of the log file: /u01/app/11.2.0.3/grid/cfgtoollogs/opatch/opatch2014-02-03_15-57-24PM_1.log

  Location of the output file Lsinventory: /u01/app/11.2.0.3/grid/cfgtoollogs/opatch/lsinv/lsinventory2014-02-03_15-57-24PM.txt

  --------------------------------------------------------------------------------

  Installed products of higher level (1):

  Oracle Grid Infrastructure 11.2.0.3.0

  There are 1 product (s) installed in the home of Oracle.

  There is no temporary patch installed in this House of Oracle.

  --------------------------------------------------------------------------------

  OPatch succeeded.

  [oracle@srvm58-1 OPatch] $

  When I tried to apply the PSU, I get the following errors:

  [root@srvm58-1 OPatch] #. / opatch auto /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653/16315641-oh /u01/app/11.2.0.3/grid

  Execution of /u01/app/11.2.0.3/grid/perl/bin/perl./crs/patch11203.pl - patchdir /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653 - patchn 16315641 - oh /u01/app/11.2.0.3/grid - paramfile /u01/app/11.2.0.3/grid/crs/install/crsconfig_params

  It is the main log file: /u01/app/11.2.0.3/grid/cfgtoollogs/opatchauto2014-02-03_17-46-03.log

  This file shows your detected configuration and all the steps that opatchauto tried to do it on your system:

  /U01/app/11.2.0.3/grid/cfgtoollogs/opatchauto2014-02-03_17-46-03.report.log

  2014-02-03 17:46:03: starting installation of Patch Oracle Restart

  The file of configuration settings using: /u01/app/11.2.0.3/grid/crs/install/crsconfig_params

  Enter 'Yes' If you have unpacked this patch to an empty directory to move forward (yes/no): Yes

  Enter 'Yes' If you have unpacked this patch to an empty directory to move forward (yes/no): Yes

  OPatch comes with the CMO, enter the path to the absolute response CMO file:

  /U01/app/11.2.0.3/grid/OPatch

  The minimum version of opatch search fix /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653/16315641/custom failed for /u01/app/11.2.0.3/grid

  The minimum version of opatch search fix /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653/16315641/etc failed for /u01/app/11.2.0.3/grid

  The minimum version of opatch search fix /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653/16315641/files failed for /u01/app/11.2.0.3/grid

  Check failure of version Opatch for oracle /u01/app/11.2.0.3/grid House

  Version check Opatch failed

  ERROR: update version opatch for households failed and retry

  Automatic opatch failed.

  [root@srvm58-1 OPatch] #.

  OPatch is already a more recent version. Help, please!

  OK I solved the problem. The error I was getting is misleading.

  I did two things:

  1. for the root user: "export PATH=$PATH:/u01/app/11.2.0.3/grid/OPatch".

  2. thanks to the solution provided by 'Papp Balázs' in the post:

  confuse OPatch error PSU 13919095 (July 2012)

  I removed the location correct patch and re-issued the command like this:

  [root@srvm58-1 OPatch] #. / opatch auto /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653-oh /u01/app/11.2.0.3/grid - ocmrf /u01/app/11.2.0.3/grid/OPatch/ocm.rsp

  instead:

  [root@srvm58-1 OPatch] #. / opatch auto /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_1608365316315641 - oh /u01/app/11.2.0.3/grid - ocmrf /u01/app/11.2.0.3/grid/OPatch/ocm.rsp

  all right.

• Pre - Req courses before registering for the workshop course for certification VCP5-VTC (confusion)

  Dear all,

  I intend to attend examinations VCP5-VTC and all through vmware site I found to attend this certification, must complete one of the courses of training to get the pre - req certificate. One of the pre - req given on the site is "Trouble Shooting Workshop", when I checked the details for this course, it is said below pre - req.

  Prerequisites include completion of one of the following:

  • VMware® Certified Professional 5 - virtualization data center (VCP5-VTC)

  • VMware vSphere: Fast Track [V5.1]

  • VMware vSphere: optimize and scale [V5.1]

  Administration and knowledge equivalent • experience with ESXi and vCenter Server

  Experience with the work on the command line is strongly recommended

  I need to know if I'm not VCP5-VTC and also did not attend the Fast Track or optimize and scale, I can't save for the course of the workshop? I must firstly fill Fast Track OR optimize and only then I'd register myself in over course "Workshop" scaling?

  Please specify.

  Kind regards

  Technically, anyone can book themselves on the workshop, but the advanced/content issues are not really suitable for those who meet these prerequisites listed - those who do not know how what is fast track and Optimize classes & scale would have difficulty with the workshop.

  You don't HAVE to be a VCP5 VTC either, but if you are then you will be at a level equivalent to a person who did the FT/O & S classes - that's why certification is listed as an alternative condition, as well as the "equivalent knowledge and experience.

• opatch 10.1.2 Oracle Home - ERROR: OPatch failed due to problems in the area of patch.

  Hi all

  DB: 11.2.0.3.0

  EBS:12.1.3

  Operating systems: Solaris SPARC 64-bit

  I get the following error message on the command below:

  opatch $ apply - invPtrLoc $ORACLE_HOME/oraInst.loc

  Setup Oracle interim Patch version 1.0.0.0.64
  Copyright (c) 2011 Oracle Corporation. All rights reserved...

  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)

  Oracle home: /d001/test1/apps/tech_st/10.1.2
  The Oracle Home Inventory: /d001/test1/apps/tech_st/10.1.2/inventory
  Inventory Center: / export/home/applmgr/oraInventory
  from: /var/opt/oracle/oraInst.loc
  YES location: /d001/test1/apps/tech_st/10.1.2/oui
  YES shared library: /d001/test1/apps/tech_st/10.1.2/oui/lib/solaris/liboraInstaller.so
  Location of Java: /d001/test1/apps/tech_st/10.1.2/jdk/jre/bin/java
  Location of the log file: /d001/test1/apps/tech_st/10.1.2/.patch_storage/ < patch ID > / *.log

  The patch directory field must be a number.

  ERROR: OPatch failed due to problems in the area of patch.

  $ opatch version

  Setup Oracle interim Patch version 1.0.0.0.64
  Copyright (c) 2011 Oracle Corporation. All rights reserved...

  Oracle recommends using the latest version of OPatch
  and read the OPatch documentation in the docs/OPatch
  Directory for its use. For more information on the last OPatch and
  other support issues, please refer to document ID 293369.1
  available on My Oracle Support (https://myoraclesupport.oracle.com)

  OPatch Version: 1.0.0.0.64

  Tried the underside of the notes but the error persists. Even tried several times 'p6880880_101000_SOLARIS64.zip' to download and unzip on the server, but of no use. This question took place now for a few days.

  (Error: OPatch failed due to problems in the area of the Patch [ID 1281504.1]).

  Opatch error: The Patch Directory area must be a number [258650.1 ID]

  O patch 1.0 . 0.0.55 fails with the error 'the Patch directory field must be a number' [ID 394601.1]

  Patch Directory area must be a number: Opatch returns with the Code error = 170 [369555.1 ID]

  Please let me know any other suggestion is appreciated as the runinstaller from Patch 5983622 -Upgrade to Forms 10 g OracleAS and statement 10.1.2.3 (437878,1) fails after running root.sh Run specific tasks.

  I'm upgrading to 10.1.2.3.0 forms using - reclassification OracleAS g 10 forms and States to 10.1.2.3 (437878.1)

  Thank you for your time

  Kind regards

  user10088255

  Hi user10088255,

  Please follow the procedure under the section 'How to check the contents of the inventory Central' (Doc ID 742477.1) to check whether or not 10.1.2 ORACLE_HOME is registered in the central inventory. If it is not registered then follow one of the methods in the same doc to add.

  Thank you

  Hussein

• OPatch failed with the error code 74

  Hello
  
  I'm on 12.0.4 & database 10.2.0.5.0 - 64bi.
  
  I am trying to apply a patch for ORA-00600: internal error code, arguments: [errior to kwqicgpc:cursta that has occurred.  But receive the error below.
  
  History of patch file: /orabase/asg/oracle/db/10.2.0/cfgtoollogs/opatch/opatch_history.txt
  
  Fix provisional application '5910901' ApplySession to OH ' / orabase/asg/oracle/db/10.2.0'
  Prior running check...
  The prerequisite checking 'CheckApplicable' failed.
  The details are:
  Patch 5910901 : Required or missing components: [oracle.dbjava.rsf, 10.2.0.3.0, newer version found 10.2.0.5.0]
  ApplySession failed when prior checks: checking prerequisites 'CheckApplicable' failed.
  System intact, OPatch will not attempt to restore the system
  
  OPatch failed with the error code 74
  
  Should it be applied to the application $ORACLE_HOME node or node of db as my db node is separate from the CM, the forms and the Apache.
  
  Below was the action plan provided by Oracle earlier.
  
  1. download and apply Patch 5910901 to a 10.2.0.3 $ORACLE_HOME and use the updated ojdbc14.jar is file.
  
  2. you can also use the 10.2.0.4 ojdbc14.jar is file.
  
  How to apply this patch and how to use the 10.2.0.4 ojdbc14.jar is file.
  
  Ask for your help.
  
  Kind regards
  DBApps

  I'm on 12.0.4 & Database 10.2.0.5.0 - 64bi.

  I am trying to apply a patch for ORA-00600: internal error code, arguments: [errior to kwqicgpc:cursta that has occurred.  But receive the error below.

  History of patch file: /orabase/asg/oracle/db/10.2.0/cfgtoollogs/opatch/opatch_history.txt

  Fix provisional application '5910901' ApplySession to OH ' / orabase/asg/oracle/db/10.2.0'
  Prior running check...
  The prerequisite checking 'CheckApplicable' failed.
  The details are:
  Patch 5910901: necessary or missing components: [oracle.dbjava.rsf, 10.2.0.3.0, most recent version 10.2.0.5.0 found.]
  ApplySession failed when prior checks: checking prerequisites 'CheckApplicable' failed.
  System intact, OPatch will not attempt to restore the system

  OPatch failed with the error code 74

  Should it be applied to the application $ORACLE_HOME node or node of db as my db node is separate from the CM, forms & the Apache.

  Below was the action plan provided by Oracle earlier.

  1. download and apply the Patch 5910901 for a 10.2.0.3 $ORACLE_HOME and use the updated ojdbc14.jar is file.

  2. you can also use the 10.2.0.4 ojdbc14.jar is file.

  How to apply this patch and how to use the 10.2.0.4 ojdbc14.jar is file.

  Ask for your help.

  You are on 11.2.0.5 and the patch is available for versions 10.1.0.5 and 10.2.0.2 10.2.03 you do not need to apply this hotfix.

  According to (ORA-600 [kwqicgpc:cursta] [139200.1 ID]), this bug is fixed in 10.2.0.4 If you're on 10.2.0.5 you don't need to apply this patch that is included in the version of your database.

  Please log an SR for this error if (search tool error ORA-600/ORA-7445/ORA-700 [153788.1 ID]) does not help.

  Thank you
  Hussein

• OPatch failed with error code = 74

  Hi all
  
  I am trying to apply a Patch to fix a HFM error, but the patch has failed for the following reason:
  
  I applied the apply, but the patch failed due to the following error:
  
  ApplySession failed when prior checks: checking prerequisites 'CheckActiveFilesAndExecutables' failed.
  System intact, OPatch will not attempt to restore the system
  
  OPatch failed with error code = 74
  
  According to the documentation of patch, step 1 is to stop Services of HFM, HsxServer.exe, HsvDataSource.exe and CASSecurity.exe process on all application servers.
  
  I couldn't find these processes under Task Manager on our server HFM. So I stopped all Financial Services of the Hyperion of services.
  
  I can't find these processes. I don't know if just by stopping all these processes automatically interrupted HFM services?.
  
  Help, please!

  It might be useful to restart the server to clear all the locks on the files and make sure that no Hyperion not associated services are set to start before restarting the case, once you have restarted the files will be locked again.

  See you soon

  John
  http://John-Goodwin.blogspot.com/