Yet another question about VCP, training materials

Similar Questions

• Yet another question about the update with the shutters tab

  I am quite new to this, but I've been scouring the boards and try many different things, and I decided to ask for advice.

  There are other threads similar to my problem such as:

  http://supportforums.BlackBerry.com/T5/Java-development/SetFocus-issue-with-tabbed-screen-page/m-p/6...

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-delete-a-Manager-or-a-field-that-is-c...

  I have a set up tabbed pane based on the example and everything works fine until I have delete a line from a VerticalFieldManager. It is by default the focus on the first item on the screen, and I get this. My problem is trying to substitute or replacement behavior.

  My screen implements the FocusChangeListener for the buttons on the tab (custom LabelFields).

  I tried many different variations - I tried to manage the update completely manual and ended with a bit of a mess. I tried to capture the event navigationUnclick() and coding of the focusChanged() method to manually switch the update, but it seems that the focusChanged() method is called before the focusChanged(), which doesn't help me.

  As I said I am pretty new to this so I could do something very stupid, but I don't really understand the focus handling implementation. A kick in the right direction would be appreciated.

  Thank you.

  You can have a NullField in your managers before all other areas - in this way, even if you delete the rest, the NullField might keep the focus.

  If this does not help, try the substitution of sublayout for your managers, call super.sublayout and then explicitly setFocus to your NullField (the deletion of any field causes a display Manager to rearrange).

• Questions about VCP, VCI

  Hello

  Recently I finished my course of VSICM4 and now I have a few questions about VCP410 and VCP310 exam.

  1. can I take the VCP-310 exam and after that take the VCP-410?

  2. If I passed VCP410 exam with the lower score to be VCI, is that I can take any other examination to achieve?

  Thanks for your help

  Sincerely,

  Sohrab

  If I passed VCP410 exam with the lower score to be VCI, is that I can take any other examination to achieve?

  For the note required VCP410 see the official replay:

  Score VCI requirement

  André

• Another question about Dates

  Hi, I have another question regarding the use of the field date in Adobe Designer 8.  I have the updated domain in place so that the person can enter the date, lets say, 12/12/11 and it will convert to December 12, 2011, or, the user can click on the calendar that is attached to the date field and make a date selection.  My question is this.  Is there a way that can not only the calendar go to any date by selecting < or >, but can also go to an exercise < < or > >?  We have contracts that extend from 2 to 3 years and want this option to be available.

  Thanks for any help you can provide.

  Here is how I currently have my date fields in place.

  In the field section:

  View model: MMMM D, YYYY

  Edit pattern: M-D-AA

  Section of the value:

  MMMM D, YYYY

  Date must be entered as per example, 12 January 2012

  Liaison section:

  MMMM D, YYYY

  The calendar widget allows you to select other years.

  When you open the calendar, click on the name of the month, the calendar will show you every month of the current year.

  When you then click on the year, it shows you all the years of the current decade.

  

• Questions about VCP 4.0

  My name is

  Arun and I work as an office of hp support SME (Pavilion &)

  Presario), in training and research on the Windows operating system. I intend to

  courses on VMware vsphere or VCP4. It is a course of 4 days, now, all I want

  know is how prepared it is necessary with the VMware ESX so that we don't sound like no

  un laïc là-bas (classe) .

  Here are all the questions I have, please don't take your time and answer following questions that I really want to come in this area.

  1 I have a good knowledge of VMware workstation, install VM configuration, cloning and Teaming etc. Now, before entering this VCP4 Do requires a thorough knowledge of

  ESX or know the features of a VMware VM is the will that be enough

  2 and come to the knowledge of the OS I worked on Win XP and was one of the members of the launch of Win Vista hp and his team will happen with Win 7 I go to

  The Malaysia for the training partners, but I've never worked on the servers, especially on Linux, I took courses of Certification Solaris but I could only complete part 1 of it. If we require a deep knowledge of Linux/Solaris operating system.

  3 please let me know what all to prepare before entering the classroom.

  4. What are the job prospects once the course is over, we have or have any chance of getting a job in hp itself or we should seek outside. 

  5 is it better for me to use VCP 3 instead of VCP 4?

  Take your time and answer these questions, I am very desperate to have a change in my profile, impatient to retake the course in October 7, so I'll have very less time on site, waiting for an answer very soon.

  Post edited by: ArunNukala

  Hi Arun,

  With knowledge of VMware workstation is good and enough to take the VCP 4 class

  Also try to know the basics of storage technologies, network VLAN and basic linux commands & file types of partitions system etc...

  They wear what is VMWare products for virtualization and virtualization

  Heard that requritments going on in HP, EDS, and IBM for Windows with VMware & Citrix profiles

  VCP4 is preferred

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Prakash

• Questions about the training of the blackBerry Smartphones

  New to Blackberry Tour - only Sprint Smartphone I can use it on the international scene.

  No Sprint knows how to "train" me - been in 4 places.

  Can someone offer an idea where to get help more users manual?

  If you need a step by step tutorial how to do something on your phone and you want in real time, your company would be the best option.  If, however, you have a question and you don't mind a tutorial written, ask it here.  We can respond either just below your message, or we can direct you to one of the articles to the Knowledge Base of BlackBerry which is documentation directly from BlackBerry itself.

  Just as a test, exactly what information are you looking for?  Maybe we can help you here.

• Another question about the redesign or the future of

  Hello

  When you read a topic about the removal of 'Preview' of the name of the software, staff responded that Adobe sought to 'take the best features of reflow and their integration into other tools.

  We are currently looking to use reflow as befits our very good business model. Currently, use us Photoshop for Desktop models, but is not a preview of the designs with versicles mode, which is exactly what reflow.

  It lacks some details of Photoshop, like ToolTips, detailing the size in pixels of the area being created and being able to move groups elements of item with the keys - we are likely to see the reflow being improved to include these, or the app that may disappear?

  I left a question in an above section if breakpoints for various devices would then appear in Photoshop if the statement made by the staff of Adobe had to happen, but had no response (I assume that this is always decided on?).

  Please let me know where we are until we invest time in structuring around these applications.

  Thank you

  Hi Ben,

  The honest answer is that Adobe is unlikely to make all invest more in the characteristics of reflow. I don't know about the future PS feature, so I can't comment on those. I don't know that the PS is invest in their space of design focused on the web, UX and mobile designers, so you could make requests about features he. Here is the forum:

  Photoshop Design space (overview)

  Thank you

  Joan Lafferty

  Product Manager

• Yet another question on the planning of the CPU

  Hello!

  CPU Scheduling is one of those endless, and although I read a lot about it, I found different answers to the same question. Moreover, this is the last document on this subject and recommended... read http://www.VMware.com/files/PDF/Techpaper/VMware-vSphere-CPU-Sched-perf.PDF .

  Is it possible to run 2 virtual machines at the same time in the same logical processor? Very basic question, I'll appreciate any response and if it has links to the official documentation, even better!

  Kind regards

  elgreco81

  Ah, I think I see the confusion. There is no such thing as using a fraction of a nucleus within a single cycle. You CAN use all of a nucleus for a fraction of the total cycles over a period of time, but a physical core is busy or idle. There is no in-between, especially since we are ignoring hyperthreading in this example.

  All of a core to aid for a fraction of the total time in a given sampling period, is what gives the illusion of the use of 'part' of a core. Split in fact one heart in this way would require States and the architecture that simply do not exist in the x 86 world.

  Note that in the article by Frank Denneman he calls specifically free cycles "shopping on ' Planner. In your example, there will be always 1 free cycle at any time. There are 1000 cycles per second in your original example, and many of these cycles may be free, but there is never more than one at a time.

  To say things, otherwise, you cannot use all 1000 MHz in the first millisecond.

  The paragraph you cited in the guide to management resources assumes a Jepp 2 GHz. keep in mind that any measure of frequency REQUIRES a time interval. There is no literal split 'given time' is implied here. What they're saying is that if over a certain period of time, say a second, VM1 only consumes 500 cycles and ask no more, then VM2 is welcome to help itself to one of the unused 500 cycles initially entitled to VM1, and cycles of 1000 that VM2 was already entitled.

  I would like to know if there is still no ambiguity, or whatever it is that I does not really there.

• Questions about online training

  1. what homework comes before or during classes online?

  2. how the laboratory sessions fit the class online 1 week?

  I asked VMware education but have not yet received response.

  Thank you, Tom

  I found VMware education to be quite sensitive - but to answer your question online setup and configure class is like the public class classes - before the class, you must be a professional experienced with work experience - with the server and server operating systems are there no need no prior experience virtualization, but it is useful.  The course material is laid out very well and itself is inspired by the module. There is no real duties assigned to be outside of the classroom, as laboratories are made during class, but it would be useful to review the days lesson because in general they are build on in the next day.

  The laboratories are doing during class hours, but you can access environments lab the week outside of class.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Another question about hard drive setup

  Thank you all for the info on PC and installation material.  I have download the first CS4 trial version and it is awesome!  I have one last question? I read the rules for storage and editing platform.

  I noticed in the project settings, as there

  captured video

  Audio captured

  video excerpts

  Audio previews

  And in the preferences

  media database cache

  media cache files

  Correct me if this is incorrect

  Drive a my OS and files in project

  My second drive pagefile and media cache database and media file cache.

  Third disc captured video & audio and video previews and audio previews

  This system uses a combination of DV, AVCHD material.  I would add another hard drive?  I may be using raid 0 for the audio captured video edge.

  No problem. Especially for raid0 configuration, you can easily use the on-board raid functions. No sense getting a controller separated for this card.

• Another question about dbms_metadata.get_ddl

  Hello
  
  Recorded in as 'sys as sysdba' I tried to get the DDL for the EMP table in the SCOTT schema. Here is the output I got:
  

    1* select scott.dbms_metadata.get_ddl('TABLE', 'EMP') from dual
  SQL> /
  select scott.dbms_metadata.get_ddl('TABLE', 'EMP') from dual
         *
  ERROR at line 1:
  ORA-00904: "SCOTT"."DBMS_METADATA"."GET_DDL": invalid identifier

  Remove the reference to SCOTT, we get another error (no surprise):
  

  ORA-31603: object "EMP" of type TABLE not found in schema "SYS"

  Question: How the ADMINISTRATOR bring the DDL for a table without having to sign in as a user that owns the schema?
  
  Thank you
  
  John.

  He must inform the owner of this object when running DBMS_METADATA of SYS.

  If we describe DBMS_METADATA

  FUNCTION GET_DDL RETURNS CLOB
   Argument Name                  Type                    In/Out Default?
   ------------------------------ ----------------------- ------ --------
   OBJECT_TYPE                    VARCHAR2                IN
   NAME                           VARCHAR2                IN
   SCHEMA                         VARCHAR2                IN     DEFAULT
   VERSION                        VARCHAR2                IN     DEFAULT
   MODEL                          VARCHAR2                IN     DEFAULT
   TRANSFORM                      VARCHAR2                IN     DEFAULT
  

  So there must be another SCHEMA parameter when running DBMS_METADATA of SYS.

• Yet another question of model

  Recently, my model started inserting his own repertoire of all the URLs in the site when I update the pages, so:
  
  href = "site/index.htm"
  
  became:
  
  href="site/templates/index.htm".
  
  The links in the site are enterred like this:
  
  href = "Stories.htm"
  
  For a page that is located in the directory of the site. The model transformed into:
  
  href = ' templates/Stories.htm'
  
  This just started happening. Before that, there was no problem. No idea why this happens and what to do about it?
  Of course, none of the work of the image or the links of the CBC.
  
  Help
  
  -Kenoli

  Thanks for your quick response. I'm helping a friend here and what threw me was that it works and then suddenly wasn't. Of course, I don't know what she could do to cause that, even if she is not conscious of having anything other than make a small change and update related files to the model. I discovered that inserting a "... / ' from each link solved the problem. Here are answers to your questions:

  > Are these pages * in * the Templates folder?

  NO.

  > Are you put these links of coding, or by searching for the target files?

  I don't know, but try the method browse inserts the "... / 'syntax in front of the link." (should have tried it immediately)

  > Can we see your template page?

  I think this is resolved, so...

  > DW did only what you tell it to do...

  Gotcha, although, as in life, sometimes we don't know exactly what we said.

  Thank you

  -Kenoli

• Another question about removing icons from home page

  the User Guide says I can delete unwanted icons from my homepage pulling them to the trash... However, I have no trash on my homepage... I hit all the panels, but no trash. The guide shows one... What don't get me?

  Thank you all... it will be questions for tonight...

  Jackson

  Jackson,

  The trash can will appear instead of the circle (between the dialer and contacts buttons) that pulls the apps is, after you press and hold the widget or icon

  you want to remove.

• BlackBerry smartphones yet another question of Storm vs App Store

  Hi all

  I have a storm on the Vodafone UK network with the latest version of the software installed, version 4.7.

  I received the email from BB with the link to the App Store, I click on the link in the email through my BB and be taken to a page telling me that my phone is not supported.

  I think I did what I'm supposed to do here, I free memory, the right software etc.

  Any chance to get the App store on my phone or I will give just straight up?

  RyanJohnH wrote:
  Hmm, I think that this may be the problem then

  That is the question

  Good luck with all that.

• Another question about AVCHD

  Hello

  Response to the question I asked here yesterday Re: transferring to 11 items Prem AVCHD movies can I just clarify that if I record in AVCHD mode and editing mode AVCHD in Prem 11 items, I need a Blu - Ray player in order to enjoy the benefits of the audio/visual of this shooting mode?

  If I don't have a Blu - Ray player, which I did not, I can still film and editing AVCHD but I need to save the file as an MPEG-2 file and then burn this file on a standard DVD for playback on a standard TV DVD player?

  Thanks again.

  Steve

  Steve,

  Thanks for the reply with precision.

  1. regarding the customization of your publication + share/computer/AVCHD with Presets = MP4 H.264 1920 x 1080 p 24...

  Advanced tab button/video...

  Please define Pixel Aspect Ratio 'Square pixels' instead of what you have set in your screenshot (screen 16:9 wide).

  2 save it in: you show in your export the screenshot dialog box now has export from the timeline by clicking a .mp4 file in the Documents folder. Don't forget the OpenDVD folder and VIDEO_TS folder related to burn on DVD-VIDEO on DVD and what will be on this disk after burning of. You don't do that here. You export the contents of your calendar to a file with the extension (.mp4) file and video compression (AVCHD).

  3. When you want to burn your AVCHD.mp4 (1080p50) to a large display of DVD VIDEO to DVD disc, then

  a. you would be important as AVCHD.mp4 in a Premiere Elements project with the project 1080p50 preset

  and

  b. use Publish + share/Disc/DVD disc with preset = DVD PAL_Widescreen_Dolby to get your PAL DVD-VIDEO screen wide format of DVD disc you should be able to play on your computer or DVD TV player.

  Major thought is that you can import your source and then export it in various formats of difference that have unique properties for themselves.

  Please let me know if you're OK with the above. If any necessary clarification, do not hesitate to ask.

  Thank you.

  RTA