Another question about removing icons from home page

Similar Questions

• How can I remove icons from the dock.

  How can I remove icons from the dock? am on El Capitan on my iMac

  I tried dragging it to the top of Wharf and held for up to 10 secongs

  Delete appears, I let go and he goes right to the dock.

  Try control - clicking on the icon, then Options and uncheck the keep in the Dock. Some icons have a removal of the Dock option.

• How to remove babylon as home page?

  I'm stuck with Babylon as a homepage. I used REVO to uninstall the toolbar, but something in the process must have gone wrong because the home page comes back. I cleaned up the About: config, as shown in the messages earlier (mstone, homepage and the new tab) and when I restart Firefox the first tab is firefox and the second Babylon. When I close and start firefox again and the first tab is Babylon and I'm at square one. The removal of the browser Manager was too technical for me and I dared not do.
  Any suggestions?

  I removed the browser Manager (AND changed the About: config) and now Babylon does not return. The removal of the Manager of browser is very simple through programs - configuration.
  Thanks for the support, I was about to give up on this one.

• Question about the bleeding and facing pages.

  Hello

  I'm in trouble with my first InDesign document which is a 96-page Magazine. It will be printed on sheets A3 stapled in the middle. My impression of the guy said it's ok in the form of A4 pages with 3 mm overhang.

  So now when I try to export in pdf print (I check the brand I want to use the documents of bleeding parameters) exports with the sections on the left and right pages (left page exported with? I guess than 3 mm? bleed from the right page and so on). If I replace the parameters bleeding and I set to 0mm it is all ok, but I fear that certain images or text could get cut because I have everything with the substantive benchmarks lost in indesign.

  And I can't uncheck pages face to face since I have some graphs (graphs and so on) that spread from one page to another (on the same spread).

  My question is... I can do and always use the bleeding or (ignore "inside the bleeding' or something) or is it OK to use the export as a spreadsheet instead of individual pages because he wanted pages A4?

  Any help for a beginner would be appreciated. Thank you.

  "' You can set inside bleed to 0 in the configuration dialog of document or in the export options when you make the PDF, or if you absolutely need to have inside purge for creep (want, but check with the printer), see InDesignSecrets" Blog Archive "Pages Breaking Apart to bleed off a spine

• Question of the blackBerry Smartphones Home Page address

  In the Configuration of the browser settings, I inadvertently changed the address of the home page.  I would now like to return to the homepage by default Blackberry, but I don't remember the URL.  Can anyone provide me with the Blackberry default homepage address please.

  Thanks in advance for the help.

  Never mind.  I thought about it.

• Another question about Dates

  Hi, I have another question regarding the use of the field date in Adobe Designer 8.  I have the updated domain in place so that the person can enter the date, lets say, 12/12/11 and it will convert to December 12, 2011, or, the user can click on the calendar that is attached to the date field and make a date selection.  My question is this.  Is there a way that can not only the calendar go to any date by selecting < or >, but can also go to an exercise < < or > >?  We have contracts that extend from 2 to 3 years and want this option to be available.

  Thanks for any help you can provide.

  Here is how I currently have my date fields in place.

  In the field section:

  View model: MMMM D, YYYY

  Edit pattern: M-D-AA

  Section of the value:

  MMMM D, YYYY

  Date must be entered as per example, 12 January 2012

  Liaison section:

  MMMM D, YYYY

  The calendar widget allows you to select other years.

  When you open the calendar, click on the name of the month, the calendar will show you every month of the current year.

  When you then click on the year, it shows you all the years of the current decade.

  

• Question about deleting podcasts from a single device

  I use the same Apple ID for all my devices, but I only listen to podcasts on my iPhone and podcasts take up a lot of space on my iPad. Is it possible to unsubscribe or remove my iPad podcasts without unsubscribe or remove them from my iPhone?

  Hi jbennettrv,

  Thank you for using communities Support from Apple.

  If you want to unsubscribe to a podcast on a specific device, you must make sure and turn off the option to sync Podcasts in your podcast settings:

  To stop synchronization of podcasts on your iPhone, iPad or iPod touch:

  1. Tap Settings > Podcasts.
  2. Under Podcast settings, turn off sync Podcasts.
     

  On the application of Podcasts

  Take care.

• Questions about the upgrade from 4.1 to 5.1

  I posted the following to the thread in the forum of Vsphere upgrade, and in five days I got ZERO responses. Perhaps more here and even here is the wrong place to post things, or maybe I'm not questions easily answer. I'll post it here too, since it mainly Virtual Center, I think. Maybe someone can help me or tell me what is the problem with my announcement that allows to go unanswered. Here we go:

  I'm about to upgrade my little (1 4 host ESX and Virtual Center) environment vSphere 4.1 and 5.1.  My database to the virtual Center lives on a separate SQL server 2008R2 server. My virtual Center Server is virtual, if that matters. I have upgraded my licenses and read the documentation, to try to formulate a plan that escapes enough causing any downtime for my virtual machines.

  I am designing a series of steps that are all pretty low, and such that each step does not harm anything, whereas if I have problems, I can take my time to solve. Then, when this step is stable, I can continue to the next step. I want to tell you what I have in mind, ask a question here and there and hope you can report errors that I make and answer my questions. The big picture is:

  1 Virtual Center update and give him a few days to show me any problem before doing anything else.

  2. upgrade to a host ESX 4.1 5.1 ESXi. Convince me things are okay, before you do more.

  3. put to level the other three 4.1 ESX hosts. Make sure that everything is fine.

  4 create new LUNS, formatted with the new VMFS, move my VM to them and remove the old one.

  If there is nothing wrong with this basic plan, please let me know.

  More details and questions:

  Question: The docs say my Virtual Center Server, under the SSO, the inventory service and the virtual Center Server, will need TEN GIGABYTES of RAM.  Is this true? It seems insane to me.

  Question: Can I install on my Virtual Server 4.1 single signon Center without DANGER?  In other words, its installation will prevent Server 4.1 virtual work center? I hope I can, because it is a new feature that I have trouble with. I don't want to get into a situation where my old virtual server Center does not work, and I can't get the new work.

  Question: The VI 4.1 client can talk to Virtual Center 5.1? The VI Client 5.1 can talk to Virtual Center 4.1? I hope that the answer to one of the people is 'yes '.

  Step 1: Create a backup of my virtual Center VM (with vRanger connection, if this is important) and a backup of my SQL database.

  Step 2: Install single Signon. Here is where I hope that this does not stop 4.1 virtual work center.

  Step 3: Upgrade the inventory Service and Virtual Center to 5.1

  Step 4: Install VI Client 5.1 on the VM virtual Center and on my desk from which I usually manage my environment.

  Step 5: Wait I'm comfortable that everything is fine. It is perhaps a day or two (or more).

  Question: How can I spend my hosts for maximum security? I'd rather put a DVD in the drive and do it from the console, unless this is not a good way.

  Question: Before I update a host, should I remove the fiber channel cables, so he can't see my VMFS LUNS? I think I read that somewhere, and it sounds like a good thing to do, even if I do not have.

  Step 6: Upgrade a host ESX 4.1 5.1 ESXi. Move a couple of virtual machines essential to it and he give a day or two to settle.

  Step 7: Upgrade the other three ESX host.

  Step 8: Wait until I'm really, really comfortable with things.

  Step 9: Create a new LUN VMFS5, migrate my VMs to them over time and remove the old one.

  I would greatly appreciate all advice and attention that you may have.

  Question: The docs say my Virtual Center Server, under the SSO, the inventory service and the virtual Center Server, will need TEN GIGABYTES of RAM.  Is this true? It seems insane to me.

  If your environment is small you can run all these in one and ofcouse if you execute all these in a server you need more RAM... There is no limit.

  Question: Can I install on my Virtual Server 4.1 single signon Center without DANGER?  In other words, its installation will prevent Server 4.1 virtual work center? I hope I can, because it is a new feature that I have trouble with. I don't want to get into a situation where my old virtual server Center does not work, and I can't get the new work.

  normally if you think only in terms of scalability, it is good to have separate these things... He is sure no questions evey thing won't work if you install it on the same server also.

  Question: The VI 4.1 client can talk to Virtual Center 5.1? The VI Client 5.1 can talk to Virtual Center 4.1? I hope that the answer to one of the people is 'yes '.

  The VI 4.1 client can talk to Virtual Center 5.1? No, but talk about Client 5.1 Virtual Center 4.1

  Step 1: Create a backup of my virtual Center VM (with vRanger connection, if this is important) and a backup of my SQL database.

  Step 2: Install single Signon. Here is where I hope that this does not stop 4.1 virtual work center.

  Step 3: Upgrade the inventory Service and Virtual Center to 5.1

  Step 4: Install VI Client 5.1 on the VM virtual Center and on my desk from which I usually manage my environment.

  Step 5: Wait I'm comfortable that everything is fine. It is perhaps a day or two (or more).

  these steps are ok

  Question: How can I spend my hosts for maximum security? I'd rather put a DVD in the drive and do it from the console, unless this is not a good way.

  BLI, or DRAC suites method what ever you... very well.

  Question: Before I update a host, should I remove the fiber channel cables, so he can't see my VMFS LUNS? I think I read that somewhere, and it sounds like a good thing to do, even if I do not have.

  Installing esxi will not hurt of thing... to the old VMFS... It will ask to keep or to format the old vMFS... BUT I prefer to remove the cables... BECAUSE we are humans...

  Step 6: Upgrade a host ESX 4.1 5.1 ESXi. Move a couple of virtual machines essential to it and he give a day or two to settle.

  no need... . If the hardware is on the HCL, I mean the firmware/driver etc... for the esx is on the HCL, then no problem...

  Step 7: Upgrade the other three ESX host.

  Step 8: Wait until I'm really, really comfortable with things.

  Step 9: Create a new LUN VMFS5, migrate my VMs to them over time and remove the old one.

  assign the new LUN and create VMFS and migrate... It'S her!

• Another question about dbms_metadata.get_ddl

  Hello
  
  Recorded in as 'sys as sysdba' I tried to get the DDL for the EMP table in the SCOTT schema. Here is the output I got:
  

    1* select scott.dbms_metadata.get_ddl('TABLE', 'EMP') from dual
  SQL> /
  select scott.dbms_metadata.get_ddl('TABLE', 'EMP') from dual
         *
  ERROR at line 1:
  ORA-00904: "SCOTT"."DBMS_METADATA"."GET_DDL": invalid identifier

  Remove the reference to SCOTT, we get another error (no surprise):
  

  ORA-31603: object "EMP" of type TABLE not found in schema "SYS"

  Question: How the ADMINISTRATOR bring the DDL for a table without having to sign in as a user that owns the schema?
  
  Thank you
  
  John.

  He must inform the owner of this object when running DBMS_METADATA of SYS.

  If we describe DBMS_METADATA

  FUNCTION GET_DDL RETURNS CLOB
   Argument Name                  Type                    In/Out Default?
   ------------------------------ ----------------------- ------ --------
   OBJECT_TYPE                    VARCHAR2                IN
   NAME                           VARCHAR2                IN
   SCHEMA                         VARCHAR2                IN     DEFAULT
   VERSION                        VARCHAR2                IN     DEFAULT
   MODEL                          VARCHAR2                IN     DEFAULT
   TRANSFORM                      VARCHAR2                IN     DEFAULT
  

  So there must be another SCHEMA parameter when running DBMS_METADATA of SYS.

• Questions about the icons for interactive report

  When I created an interactive report, rectangular icons were created automatically on the left side of the report on each line.
  When you click on one of the icons, it displays the details of the line in vertical order.
  
  Here are my questions:
  
  1. when I hid a few columns in the interactive report and clicks on the icon, it does not display the details of the hidden column. But I want to hide these columns in the report but displays all the details when you click the icon. How can I do this?
  2. How can I hide the icons?
  3. How can I use the icons don't not to view the details of a line, but towards a modifiable page to edit the same details?
  
  Thank you
  Guy

  Hello

  1. when I hid a few columns in the interactive report and clicks on the icon, it does not display the details of the hidden column. But I want to hide these columns in the report but displays all the details when you click the icon. How can I do this?

  You can create another region, or the page that will show you your line of description of identifier, or rowid. You can do this by changing the column type of link to "target of the link to Custom.

  2. How can I hide the icons?

  Access the interactive report-> column-> change of link column link (link column exclude)

  3. How can I use the icons don't not to view the details of a line, but towards a modifiable page to edit the same details?

  The same as answer 1.

  Best regards, Kostya Proskudin!

• Questions about changing OS from Vista to XP on Satellite P100-160

  Hello

  I wonder if someone could help me... I don't like Windows Vista with a passion and I would much change for Windows XP.

  My P100-160 provided with Windows Vista pre-installed, but until now I feel of it is poor to say the least! So I'd like to return the easy to use Windows XP.

  Could you get it someone please let me know if there is something special I have to do in order to get XP to run properly. I've been reading through some of the questions on the forums on this topic, but want a nice simple step 1, step 2, etc. to ensure that I do the things first.

  Thanks in advance for any assistance received.

  Best regards

  Yvonne

  Hello

  You need description step by step? Come on man :)

  Do everything simply if you want to install the XP. During the installation of XP, you will need to format the HARD disk, partition to install XP on the laptop.
  Then, after the installation of the OS, you could install the drivers of Toshiba which can be downloaded from the Toshiba driver page.

  Please note that you need XP compatible drivers! As far as I know that the Satellite P100-160 belongs to the PSPAAE series. So please choose this one if you download the drivers.

  In addition, you will need to install drivers in the correct order. Placed on the Toshiba page installation instructions could be very useful!

  Best regards

  Goodbye ;)

• Another way to remove icons on the homescreen?

  When I tap, hold and drag an icon on my home screen down to the trash, it appears immediately in place as soon as I raise my finger. This occurs on all three panels of the home screen. I also started and stopped the droid has out the battery and did some other usual stuff, nothing helps. Anyone know why this happens and what to do about it?

  Yep, pause a moment on the trash.  It will be (or should at least) turns red when it is ready to receive your waste.  Maybe you're not quite centered around the trash - move a bit until it turns red.

• Another question about the redesign or the future of

  Hello

  When you read a topic about the removal of 'Preview' of the name of the software, staff responded that Adobe sought to 'take the best features of reflow and their integration into other tools.

  We are currently looking to use reflow as befits our very good business model. Currently, use us Photoshop for Desktop models, but is not a preview of the designs with versicles mode, which is exactly what reflow.

  It lacks some details of Photoshop, like ToolTips, detailing the size in pixels of the area being created and being able to move groups elements of item with the keys - we are likely to see the reflow being improved to include these, or the app that may disappear?

  I left a question in an above section if breakpoints for various devices would then appear in Photoshop if the statement made by the staff of Adobe had to happen, but had no response (I assume that this is always decided on?).

  Please let me know where we are until we invest time in structuring around these applications.

  Thank you

  Hi Ben,

  The honest answer is that Adobe is unlikely to make all invest more in the characteristics of reflow. I don't know about the future PS feature, so I can't comment on those. I don't know that the PS is invest in their space of design focused on the web, UX and mobile designers, so you could make requests about features he. Here is the forum:

  Photoshop Design space (overview)

  Thank you

  Joan Lafferty

  Product Manager

• A few Questions about the slices from Photoshop with Dreamweaver

  1. I noticed later with CS4, if I have several layers to do the bearings once I am in Dreamweaver that the layer under the main switch, does not export.  I think it was.  I then disable the button 1 (the top one) then this 2 button is visible and export the images AGAIN...  Usually in another folder, so it replaces all the previous images.  How can I get all the layers and slices to export in one fell swoop?  I think I'm missing a checkbox somewhere but can't find it.

  2. If I keep all slices in the same places they run and do not change anything with regard to their positioning.  Could I make graphic changes to a slice and then ONLY to EXPORT THAT SLICE?  He seems to want to export all the slices and I feel that could make me have to recode everything new in Dreamweaver.

  3. Finally, you guys actually code the slices into photoshop or dreamweaver?  I think you can do one, but I do it in dreamweaver because that's where I do rollovers.

  I KNOW I'm doing something wrong and I try to understand what he.  Now I design a webpage, slice it upward, export it in html and graphics, then in dreamweaver, I have to remove a slice, then add once again as a rollover image in DW.  Seems wrong, but it does not work.  It's just a pain because if I have to make changes to the site, it seems that I have to re-export all of PS againnnnnn and then it all with recode bearings etc in DW.

  Thanks for all the advice and answers!

  1. you must save each State separately unless you make a psd for buttons only, then you can copy - paste the buttons and record all the States in the form of separate buttons at once.

  2. by default, that the images are placed in a folder of Images, if it does not find one then he creates then save your image then just outside the pictures folder or change the behavior of the dialog box save optimized slot by selecting from the drop-down list of settings and deselecting the Images to put in the box of the folder for saving files section

• Question about Windows XP CD home for Satellite A105

  I have an A105 Satellite and recently it started running very slowly. With most of my machines I would wipe and rebuild them (all my data is backed up) but I don't have a CD Windows XP Home (it didn't is come with the laptop such as Windows has been pre-loaded - I think that this is the norm?).

  Is there a way to create the CD of the laptop or can I apply for a Toshiba?

  Thank you

  Steve

  Hello Steve

  Laptop computers are generally preloaded with the settings and also delivered with recovery media. Maybe in your country you can get laptop cheaper without the recovery CD. I don't know about you.

  What you can do is contact the partner of service allowed in your country and ask if they can order one for you. I'm sure that it should be possible.