Yet CS6 Blu - ray kann nicht brennen, obwohl die keine Fehler gehoren examination.

Similar Questions

• ICH kann nicht installieren, obwohl ich Lightroom are so habe

  ICH kann nicht installieren, obwohl ich Lightroom are so habe

  Hello Barbara,.

  ALS closing zu Ned remark

  Wenn of the Adobe Produkte uber Amazon oder similar Handler/Firmen kaufst keine Seriennummer Adobe, sondern einen Code bekommst, mit dem Dir Adobe - nach einer Prozedur is small - eine Seriennummer gibt. Use dazu https://helpx.adobe.com/de/x-productkb/global/find-serial-number.html (starten yesterday: Wie haben Sie Ihr Produkt acquired?)

  Following Teil der, so sehe ich just STI at least auf meiner Adobe Web page weggefallen, alles spielt sich im g.o. link AB. Lasse ICH dennoch als Info are, are konnte ja immer noch bei Dir happen. "Refer klicke Dich bitte durch Deinen 'Adobe Store' suche und den Knopf"Seriennummer request". Fulle das Formular aus und nach einer Weile bekommst die Seriennummer real. »

  Hans-Günter

• Reference still cs6 Blu - ray error 3 cannot write file M25

  Hi guys

  I still use cs6 to burn Blu - Ray without any problem so far

  Tried to burn a wedding video and I get now this error 3 failure etc etc.

  I use a Mac with a plugin blu - ray LG burner.

  I burned a picture of the still fron of marriage on my hard drive and using Toast right click to burn to disc

  Message arrives to insert a drive of 25g in drive.and is here

  It will not pick up my external hard drive for some reason any.

  Can someone help me find out sort yet or what software would I need for the mac to be able to burn blu - ray discs

  Thank you

  Nige

  To install to this discussion in the forum again.

• CS6 Blu-Ray/images and manual stuff

  For some reason, when running through a slideshow manually advanced in my Blu - Ray project, the Action of end does not work.  Indeed, when I get to the last slide in the manual slide show, the 'next' button stops working!  I can click on "Back" and then the button "Next" active again, but once I moved (via the next button) to the last slide in the show again, the only way that I can return to my menu is by using the Menu at the top of the remote control button.

  Is this a known issue?  Is there a viable workaround solution?  The same project, built on a DVD, does not have this problem, so it must be the poor implementation of the Blu - Ray (or less navigation Blu - Ray) that Adobe has done in yet (so far)...

  Any help would be GREATLY appreciated!

  Thank you!

  Jim 8 ^)

  When you use a manual slideshow, I add a copy of the last slide that has time built in. You can use 00.00.06. When you click on the button in advance it will go to this slide for a short time and then go to the link what ever you have defined.

• Yet CS4 Blu - ray error: "Fatal Error", Code: '0', note: "

  Someone has encountered this: still CS4 Blu - ray error: "Fatal Error", Code: '0', note: "

  Any ideas on what this means or how to fix it?

  Burn to a BD - R.  Tried two different Blu - ray burners.  First created a Blu - ray Image.

  For CS4, you must update the component of Roxio http://forums.adobe.com/thread/400484?tstart=0
  More and Roxio http://forums.adobe.com/thread/528582?tstart=0 or directly to
  http://KB.Roxio.com/search.aspx?url=/content/KB/General%20Information/000070GN¶ms

  In addition, the names of long file or odd characters Cause crashing http://forums.adobe.com/thread/588273
  And here http://forums.adobe.com/thread/666558?tstart=0 #4
  And this thread of Message http://forums.adobe.com/thread/665641?tstart=0

• Yet CS6 crashing after start build Blu - Ray

  The project burn on a DVD perfectly but will not burn the project directly on a Blu - Ray player or even create a folder of Blue-Ray. I used the "check project" and everything seems to work smoothly. I tried to remove sections of the Menu/assets, then export, without success. The build will fail at the launch which makes me think it's a bug.

  Thanks for the help!

  When still an adjustment, rebuild the project from scratch (except for the menus, you can save them on the hard disk of the old project.

• Yet CS6 hangs at the slideshow built component of generation of Blu - Ray disc/folder

  Still no longer meets the construction of the slide show during the comprehensive construction of Blu Ray disc or folder. Project consists of 96 min video timeline via PrPro Hotlinks and tracks of Japanese & English subtitles, the menu main and 4 submenus (2 Chapter menus, subtitles and slide show). 2 menus are movement w / audio.

  Slide show consists of 147 jpegs. After the failure of the build 2, I reduced all images to 1080 uniform height. No transition, no advance manual, no pan & zoom. Fit to audio duration slideshow 2 active mp3 totalling aprx 7 mins and slide individual durationof 2 sec. Aspect 16:9 the value. The size of the encoded slideshow 58,42 MB.

  Under SP1 Win7 home i7-3610QM x 8 total 16 GB w/NVIDIA Quadro 3000 M gfx mem. No problem before with this configuration for several Blu - Ray and DVD projects. It's the first exit with a slide show component. This project built successfully for workcopy Blu - Ray disc, video editing and subtitles, but without menus or slide show.

  Help!

  Elliott

  Slideshow problems have been resolved by opening in Photoshop and saving. I think it had something to do with stripping to junk in the jpg file. I wasn't sure where you their reduced.

  Yes, reminder, new names always. I create a new slidesho import slides with new names.

  Access denied points to permissions. I would try the option "Run as Administrator"; corrects a variety of weird things. You know how many times Win7 said you (even if you are a user with administrative privileges) that you do not have access and click on continue if you want to grant this permission to yourself... I think still waiting for no man, woman, or operating system.

• Still used CS6... How to write Blu - Ray in CC?

  Greetings,

  I'm on a Macbook Pro running El Capitan 2012.

  I created a project of CS6 Encore to Blu - Ray, but I try the new first Pro CC application.

  They told me that the 'Included' first Pro CC yet... but I'm not sure how to import my previous project again and write on a disc Blu - Ray from first Pro CC.

  Your suggestions would be greatly appreciated.

  Thank you

  Tiya

  In first CC you need to export to H.264 BluRay you can use a preset.

  Import m4v and wav into enora and burn to a BD disc.

• I want to burn a blu - ray disc from 2014 CC PP and do not have the app yet. Is it possible to do?

  I want to burn a blu - ray disc from 2014 CC PP and do not have the app yet. Is it possible to do?

  Download CS6 yet...

• Best options to Export of first CC at CS6 Encore for creating Blu - Ray and DVD discs?

  Howdy!

  I have files AVCHD (MTS) of a marriage, I recorded a couple of years (Yes, it is really low on the priority list), I want to change to create DVDs and Blu - Ray discs.  I am aware that I need to make some significant cut to get everything that I consider important to even together double disc DVD and have a lot more leeway with the Blu - Ray.  If I do the editing in Premiere CS6, I can use Dynamic Link to import several chronologies in my project again and (of course) to develop a Menu that the user can use to choose what they want to see.  Then again you can do transcoding with the timelines to get the videos to put them on any disc format created by me (DVD or BD).  HOWEVER...

  If I edit the videos with CC PP (2015), I have the relationship dynamic to again (gee, thanks, Adobe!) and to each of my deadlines export to a file, load these in CS6 again and again, let the transcode various chronologies as the best it can to fit the desired output average.

  So the question in all of this - what is the 'best' format to export CC PP for later import Encore CS6?

  I can't use the MPEG2-DVD or MPEG2 Blu - Ray, because it assumes that each video is to use all the space available on the disk (same problem with H.264 Blu - Ray)!

  All right now, I am limited to Codecs and presets available in first/Media Encoder programs.

  I you'd be grateful for ideas on what could be the best (closest lossless?) format to use for the export/import of SD or HD videos!

  Thanks in advance!  {I hope the question makes sense...}

  If you do not want to use mpeg2-dvd or mpeg2-Bluray (I prefer BD H.264, this is a codec better) you can export to avi with codec lossless Lagarith as UT. Also, you can use these HD codec. But these files are huge.

  Can stick to mpeg2-dvd and BD preset and use a bitrate calculator to get the best fit on the disc.

  DVD - HQ & GOP Bitrate Calculator

• Project yet for DVD & Blu - ray - I can clone it?

  Hello

  I have a video ready to be exported from PremierePro and recorded in PAL 16:9 Full HD. Now, I need to create a DVD and a Blu - ray of the same video disc.

  I want to only create a project and then clone so that I can use it for both media.

  I have already created a project yet, pick a HD theme. I have now completed everything: I've only worked on the menu but no video, jet.

  I would like to know if I can now duplicate the folder and dedicate a folder (still draft) for the DVD and the other folder for Blu - Ray or if this is not possible. I think this should be possible, because if the video is 16:9 for the two media there should be no difference; but do not know.

  Don't forget, I've changed most of what the HD model had. I used just a few things.

  If this is not possible, can you please teach me how to work on the menus and the preparation of the DVD, before I have to insert the video, once when I create two separate circles in order to reproduce the customizations?

  I wish to create two projects still separate and do create all the menu from scratch twice.

  Also, is there a valid book that I can buy being devoted to yet or is not required (perhaps because there is a lot of documentation on the Internet)? I learn properly.

  Thank you

  In theory, this should be possible, but in reality I would create certainly 2 separate projects.

  The main reason is that Blu - ray is 1920 x 1080 square pixels, DVD-video is 720 x 576 (PAL - more on this subject in a minute), and the pixels are rectangular, with the report being in the area of 1.4 PAL: 1 that can destroy a menu if simply scale you down because not only you lose half of your resolution vertical & almost 2/3 of your horizontal resolution , the pixels will be being stretched as well horizontally.

  For these reasons, you will need to choose fonts on the screen very carefully for the DVD version and I would be absolutely for certainty make 2 separate menu fixed if it was my project.

  PAL is not really an ideal standard to use, as it has a rate of 25 frames per second and you're simply unplayable outside the EU on the vast majority of the players & TV systems - you will definitely trouble to Japan & US.

  To make things even more difficult, you can't use progressive scan in PAL resolution either - it's just not in the Blu - ray standard - you will need to use interlaced.

  The video is probably the least of your worries, however. First & still may reduce but also make the necessary encoding MPEG-2 for DVD - personally I'd this separate 2 processes, review the decline in SD resolution first to a provisional 10-bit lossless codec and this review of a problem before I did the final version of MPEG-2 for DVD.

  Hope this helps

• Where is my 5.1? (The disc Blu - ray built in yet)

  Hello!

  Basically, I need to do something very very simple... but it does not work. I'm sure you can help.  ;-)

  Still, I have a simple menu with 2 buttons:

  Button1-> audio 1 (2.0)

  Button2-> audio 2 (5.1)

  .. .and it's almost everything.

  The thing is, once 'built', my Blu - ray Disc 2.0 on audio 1 and audio 2 also...

  What is the trick?

  THX ;-)

  The 5.1 track is an .ac3 coming out of the compressor. (Dolby Digital 5.1 Pro at 448 kb/s)

  Can not yet handle this?

• Blu - ray error - Encore CS6

  Hello

  I have problems to export my Blu - ray - I used Media Encoder to export my Premiere Pro sequence, using the codec H.264 Blu - ray.

  This is the error message I get, which appears once it seems to have burned the disc and on the "flow of building": Blu - ray error: "unread device", code: '3', notes: "CreateStcSequence: cannot write M2S file. »

  I tried to re - export my images and the creation of new projects yet.

  Anyone has any suggestions please?

  Thank you

  Try building an image. If it works, burn with ImgBurn for PC or for Mac Toast.

• Still, CS6 and Blu - Ray... Best?

  Anyone (well, anyone who has had the chance to try the CS6 programs) can tell me if they feel still manages the better Blu - Ray that she did in CS5.5 (and earlier versions)?

  My main question is whether or not the settings in the menu are always 'one size fits all', that is, the parameters for a Blu - Ray menu are the same as for a DVD menu, or if Adobe realized that they both have a different architecture?

  Thanks in advance!

  (- Jim 8 ^)

  Well, I'm unable to complete a project, Blu - ray, with 6.01. First of all, it was a rendering problem that resolved with upgrade of e t 6.01. Now I have a burning problem. You have read my other posts for more details.

  For what is the menu, these are the same but the look of the HD menu not like crap on Blu - ray.

• Yet CS4 don't transcode or do blu ray

  I couldn't get even get a bluray.  Built the first film. The dynamic link to get it in even without worries. So no dice.

  I tried to import with dynamic link and then buliding immediately, errors of blueray to object ' premierproject) export file not found. "

  The dynamic link creates 2 files in Encore, the chronology and something else, audio? The file that is not the timeline say non-transcoded. Right-click and choose transcode I see the load alllll the way to complete, bar progress hear a ding from the speakers... and nothing. Is not yet exterieuree-transcoded. If I try to re - transcode the progress bar starts, btu I hear the ding in a few seconds.

  I have tried many suggestions looking around, running in administrator mode, deleting caches, removing the entire project, re-record the two first files and more files.

  Help, please.

  I did a DVD with the same program when I was using XP 32 bit. I'm definitely not a PRO, but should be able to do a simple family movie on a disc.

  Barry

  My specs:

  Win7 home premium 64 bit

  Intel Quad Core 3.0Ghz

  8Gbs Ram

  GTX460 GPU

  a lot of patience

  ram8kumar wrote:

  In my view, there is a bug that someone on the forum for the generated files first considered not h264 as of the legal in another.

  This is the case when the file has been exported using a preset VBR 2 Pass.

  Try exproting using 1 pass VBR or CBR. Need to say do not transcode in yet.

  Thank you

  Ramesh.

  I think it was me a few weeks ago? Well I had this problem with 2 pass, I changed it to 1 pass and sesame.

  bls57822 wrote:

  Audio is exported in the form of Dolby, just released in form of .ac3 file, which once imported still tells do not transcode.

  The video file is exported as h.264, comes out as a file, .m4v, which once imported said not transcoded.

  I used most of the default settings for bluray h.264, audio PCM the auto value parameters. I changed it to Dolby,

  I think the video file has been auto 29.97 the default value, which is the highest. I left it there.

  Maybe I put the video 'p' and the 29.97, that doesn't look like not to it's standard blu ray settings. 29.97 only available in '' i ''?

  I will try to match the wiki the link settings.

  What resolution/frame rate do you have used / use with success?

  You can do 1080 p 29.97 or 30. 1080 p will not be 23.976/24. If you want 29.97, it MUST be 'I' so just follow what are the legal video specifications, depends on the size of YOUR source footage, determine what you think the best choice for your delivery to be film.

  as much as I, I usually stay on 1080i60 1 pass, sometimes 720p59.94 1-pass, but I did it only once. or for my super long SD disks (where I cram as 12 hours of footage on a disk) 480i29.97 I pass. (it annoys me REALLY, for the blu - ray it abolished 480 p, but its legal on DVD. huh?)
  

  * edited some stuff *.