CS6 Blu-Ray/images and manual stuff

Similar Questions

• HP Pavillion DV-7? Nr can a recovery disc in the Blu - Ray drive and reinstall original settings?

  After my sister died, I found his nearly new laptop (HP Pavilion DV7? nr), but have not been able to use it, because of password and a biometric scanner. It sounds like a nice laptop, but worthless if I can't use it. Any Suggestions for one-it-myselfer (cheap)?
  A recovery disk can be inserted into the Blu - Ray player and re - install the original settings?
  There were not any software who carried on this laptop, so I don't know if she had, originally, and if it would work as does my drive recovery for my old HP Pavilion laptop using Vista.

  After my sister died, I found his nearly new laptop (HP Pavilion DV7? nr), but have not been able to use it, because of password and a biometric scanner. It sounds like a nice laptop, but worthless if I can't use it. Any Suggestions for one-it-myselfer (cheap)?
  A recovery disk can be inserted into the Blu - Ray player and re - install the original settings?
  There were not any software who carried on this laptop, so I don't know if she had, originally, and if it would work as does my drive recovery for my old HP Pavilion laptop using Vista.

  Contact HP and see what combination of keys at startup it probably gets to the factory defects.

  Maybe this:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&cc=us&DLC=en&product=18703

  Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

  If the computer does not start in Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

  1. Press on the button / stop to start the computer and press f11 when the standard BIOS guests appear on the black screen.
     

     NOTE: by pressing the f11 key during startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

     • If the HP Recovery Manager can access the recovery on the hard drive partition, you receive a to back up user files before you start the recovery prompt. Follow the instructions.

     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.

     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  2. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.

  Solve a common problem of recovery.

  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.

  Or try to order a new recovery discs...

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07143&LC=en&cc=us&DLC=en&product=18703#N76

  Maybe this article:
  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320

  HP has a simple recovery process, and its policy to provide filtering alternatives is well integrated in its support pages.

  I went through the process of replacing for a two-year-old HP Pavilion Elite m9600t. This system was built in the summer 2009, before Windows 7 shipped. As a result, my only option was to support Windows Vista 64-bit. For first class mail, HP shipping or taxes added up to $15.80. (I might have updated 2-day or night FedEx delivery for another $6 or $12, respectively.)

  

  From this page: HP and Compaq Desktop PC: looking for recovery discs?

  There step by step instructions to create a recovery disc for Windows 7, Windows Vista and Windows XP. Also, it offers the possibility to order replacement disks, but warns that these discs may only be available for a limited time:

  If you are unable to create a set of recovery discs, you may be able to order a set of replacement of HP HP discs. maintains an inventory of recovery disks of replacement several years after the product was released. However, due to licensing restrictions, HP is able to provide these recovery disc for a limited time. If the computer is several years after its warranty period, HP isn't maybe able to provide replacement for your computer disks.

  I tried with a model of 2008 HP (long out of warranty) and was able to locate filtering alternatives.

  The process of media control was a little confused. The key is to start with the appropriate model number, then click on software and driver downloads, as shown here:

  

  On the next page, you are prompted to select an operating system. The support link to recovery in the results list is available only if you select the version of Windows that your computer initially comes with. If you do not see a section "Recovery media", HP suggest "to ensure that you are on the right model number page and select another operating system." It worked for me.

  Interestingly, the last section on the page is titled "finding of the recovery disks from other Web sites. It contains a warning at the top in bold: try all other options in the paper support before attempting to order recovery disks at outside HP.

  If HP is further providing the recovery disc for your computer model and is no longer possible to create a recovery disk, you may be able to find a solution outside of HP.

  Popular online auction sites and providers of computer parts may have a part in stock original recovery disk. However, be cautious and aware of the risks when buying from a source outside of HP recovery disks. Beware of sites that offer recovery solutions when they are not affiliated with HP.

  Even if HP could not have a recovery disc available for purchase of value, search the part HP command Web site to find recovery kit part number that corresponds to your computer. Once you find the part number of the recovery disc, use the number in your search for best results.

  It's actually good advice. If you can find a part number, you may be able to find records of replacement from a legitimate outside vendor that specializes in parts for the models of the manufacturer of your PC.

• Desktop HP ENVY Phoenix 810qe: Blu - ray player and SuperMulti DVD burner

  I am interested in the HP Store and want to buy HP Envy 810qe desktop. It has a 'Blu - ray player and SuperMulti DVD burner." Can I burn data and media projects of discs blu - ray recordable with this burner? I have two different answers when I talk with the Sales Department of online chat.

  If the description says "drive Blu - ray and DVD SuperMulti burner."  Then it can only burn to DVD or CD.  In the description in the "customize and buy" button is says - play music and movies, backup files and burn your own CD and DVD.

  There is no possibility to opt for this particular model, unfortunately.

• Blu Ray player and HP MediaSmart DVD problem

  I recently bought a hp with a hp w2408h m9515y desktop computer.  This computer came equipped with a Blu Ray player and when I tried to play a movie for the first time on hp mediasmart dvd I got the message 'content is protected', "the content is not allowed to play in the current display mode.  I also tried to play blu ray on windows media player and windows media center and had no chance.  I spoke with hp and geek technical support team of the best buy also with no luck.  If anyone has any advice I would appreciate it, of course.  Thank you

  Finally, after about 3 hours with tech support at hp, we have solved the problem.  We had to reset the computer to factory settings and it worked.  Erny, thank you for your help, I appreciate it.

• HP P6-2180EA to add a Blu - Ray player and Nvidea

  Hey,.

  I have recently purchased an EA of P6 - 2180 H and would like to make a few updates to this topic.

  So, I think adding a Blu - Ray player and graphic NVIDEA card extra HDD for storge.

  My question is:

  -This inply by adding another power will provide or the real 300W enough? If not how much power?

  -The graphics card have somverybig ones and just to think in a basic GT640 or Saphire HD 7770?

  -Drives internal hard how can I add in this system?

  Here is a picture of the case.

  Thanks for your help!

  

  Here are the specifications of your desktop HP Pavilion p6-2180ea. According to the specification, this model has room for a hard drive and an optical disc drive. You will not be able to 'Add' options of one of these components, but you can replace them with upgrades. 300 watts is not going to be enough for the HD 7770 and will be marginal with the GT 640. In addition, you can hurt ask graphics cards in this case 'mini '. You have to measure along the plane of the PCIe x 16 location at the back of the housing to the front until you hit an obstacle.

  This system is not really designed for the upgrade and this can cause overheating.

  Please click the White Star of KUDOS to show your appreciation

• Error in creation of the blu - ray image "resource not found".

  Whenever I try to create an image, I get an error message complaining that one of my strengths (a film) cannot be linked.  I tried to re - connect the file including its audio track separate and still says they are already linked.  I can get an overview of the timeline with all the relevant assets.  What can I do to solve this problem and to create my image?

  Are you sure that the error is not 'export file not found '? Yours is the only example of 'not found assets' that I find in searches.

  See this thread:

  Re: during the generation of Blu - Ray, export file not found, referring to the timeline

• Reference still cs6 Blu - ray error 3 cannot write file M25

  Hi guys

  I still use cs6 to burn Blu - Ray without any problem so far

  Tried to burn a wedding video and I get now this error 3 failure etc etc.

  I use a Mac with a plugin blu - ray LG burner.

  I burned a picture of the still fron of marriage on my hard drive and using Toast right click to burn to disc

  Message arrives to insert a drive of 25g in drive.and is here

  It will not pick up my external hard drive for some reason any.

  Can someone help me find out sort yet or what software would I need for the mac to be able to burn blu - ray discs

  Thank you

  Nige

  To install to this discussion in the forum again.

• Multi-writer stops and Blu - ray player and stutters on the new desktop.

  New HP ENVY H8 - 1420t CTO desktop PC.  Upgrade to drive optics multi-writer blu - ray.  While playback of blu - ray movies, drive spin for a few minutes then stops, stutters and makes a mechanical sound for minute, and then continue to play.  Very annoying.  Desktop is Intel i7 quad cpu 3.5 ghz and comes with the PowerDVD blu - ray software.  HP exchanged the drive.  No help.  Software mfg Cyberlink tells me that I should update the firmware.  BUT, I can't determine what is the model of the optical drive, who made it and therefore, how to get the firmware updates!  NOTE: Cyberlink also told me it is perhaps a matter of 'performance' - how is this possible with all of the provided equipment?  The graphics card is a Nvidia GeForce GT 630.  Help!

  I had a similar problem on my HP ENVY dv6t laptop and discovered that it was caused by the BlueSoleil BlueTooth software WMI calls interrupt playback. Where there is a similar problem, take a look at my blog and see if it helps you:

  http://www.madavlen.NET/the-case-of-the-stuttering-laptop-Blu-ray-player

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Yet CS6 Blu - ray kann nicht brennen, obwohl die keine Fehler gehoren examination.

  Guten Tag

  Unser ist folgendes problem:

  Ein Projekt in Encore CS6 lasst sich nicht auf Blu - ray schreiben.

  DAS Projekt gibt bei der keine Fehler aus examination.

  Run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions is required to create a DVD double layer or a BluRay

• Difference between Blu - Ray DVD and the Blu - Ray 2.64

  Hi all

  I try to Bly - Ray DVD of my Canon XL - H1 and Canon 5 d MII, parameter which should I choose Export type Pemiere CS5?

  2.64 Blu - Ray or DVD Blu - Ray, what is the difference between the two somehow.

  Thanks in advance

  Mitchell

  H.264 is more efficient in compression, but the best judge of what is better you are. Try both formats and play and then decide what suites your film better.

• Burn a Blu - ray disc and 3D

  How do burn you a blu - ray disc 3D video?

  Thank you

  Joe

  First of all, you still get

  Instructions again, cloud or version https://forums.adobe.com/thread/1992717 serial number

• DVD/Blu-Ray

  Hi all, in a month or so I record a show on stage and it would be great to offer a DVD and a Blu - Ray player. I have experience with burning DVDs, even, but I've never done a Blu - Ray player. My question is not how to burn a blu - ray because I don't know that I can understand that, but my question is - easy is it to burn a dvd and blu - ray from the same project again? or is it something where I have to create a completely new project yet. I don't know how all this works because disks are at different resolutions and sizes, and all that. Thank you!

  Do not assume that you can burn a Blu - ray. Still has a history of problems with burns, and Blu - Ray were more trouble than DVDs. The common solution is to build a Blu - ray image and burn with ImgBurn (for PC) or toast (for Mac).

  Blu - Ray allow some things that the DVD doesn't (context menus, the menus MultiPage, the better resolution/color in the menu highlights). Do not assume that they will work to ensure that test you your workflow.

  Still allows you to create Blu - ray and DVD on the inside of the same project. The consensus of the return time was that it often leads to problems. It seems to work for some users. Because iron is different (the size is not so much the problem), a HD menu could cause problems for the DVD.

  The safest method was to use separate projects.

  Bottom line, test your workflow (using the exact camera models that you will use) well in advance.

• Generation of Blu - ray: no video (red, green, image etc.)

  Hey everybody,

  If this problem has already been addressed, could someone please point me in the right direction? I searched and have not found anything similar, but didn't know what to look for.

  My problem: every time I build a blu - ray project in again, I get the same result. the video will play (according to the progress on the Player bar), but the image is always a solid color, sometimes it's red, green, beige, black, apparently just at random, but always the same color throughout the video full.

  I tried so many different things at this point, I am at a loss to know how to proceed further. I tried this with at least three different projects, that have been created in the first. I tried both the dynamic link between first and still and export the video first and import in again later. I tried the transcodage.264 and MPEG2 (I'm not very well informed about the settings, so I use the default values). I tried to build the project in again as a blu - ray folder and ISO. I burned the disks and played just the digital files on my PC.

  The video still plays well until after it is exported from even (that is, it displays an overview very well in the exported video first of first plays well in players like VLC and fine video previews in yet). And I have no difficulty building still on DVD with the same video, editing and all that jazz.

  The only thing I haven't done is taken worth a try to reinstall again, that will be my next step if no one here has any suggestions. I'm running CS6 with all latest updates. I tested playback of blu - ray in PowerDVD and a PS3.

  As I mentioned above, I'm not very proficient in video. If I have omitted important details, let me know. Thanks in advance for any help!

  Matt

  Well, just for fun, I've updated my (Quadro 4000) video card driver and surprisingly, that solved the problem on my PC. Burned a disc to try on my PS3 at home to see if it works also. I'm not familiar with how works yet, but maybe he uses the video card when you build a project?

• Blu Ray playback jump even when not burned to disc (CS6)

  I still use to create an image of single disc blu ray from 5 video files between each with 2 audio tracks (stereo and 5.1). the encoding is done via media encode using H.264 blu-ray presets and the compressor for the sound surround so again is just mount the iso. Once this is done it jumps and crashes in each video, even when played through the computer without being burnt to disc (mounted just to test). I look at the data rate is jumping all the place and when it hangs often drops to 0 or less 5Mbp/s

  I am missing a step or encode correctly or is this a common bug? I went through a stack of discs working on this problem and any help would be appreciated I need to deliver our films on DVD and Blu Ray imminent.

  See you soon

  Rich

  For anyone else having a similar problem to a constant bitrate video coding solves! no problem reading any more!