Yet its CS5.1 and for BluRay DTS: has there been any success
I have not updated to the latest version (cannot afford right now), but I would really like to know if there have been improvements in the treatment of DTS audio file.
In CS5 you can NOT create a BluRay disc with dts audio. StreamTools (using DTS MasterAudioSuite) are not accepted at all and the .cpt files are accepted, but cannot be used for DVD projects (trying to create a comic book project with .cpt you can an invalid file for the BluRay error).
If something has changed in the newer version?
I'd be really curious to know about it.
Thanks in advance
Hi all.
First of all, the suite MAS DTS - HD in fact quite legal bitstreams for Blu - Ray, DVD and CD DTS as well as digital distribution.
If still it becomes bad, and also other windows applications are similarly mistaken while DoStudio & Scenarist accept it, then there must be a reason why.
The good news is that CS6 now supports DTS - HD Master Audio in passthrough mode.
Tags: Encore
Similar Questions
-
I forgot my password for windows 7 for my laptop and a reset disk has not been created. How can I recover the password or create a new one? and I have a dell inspiron one 19 desktop... your help will be very appreciated thanks in advance!
Here are the usual methods to solve this problem:
- Restart the computer with your Windows repair CD, then use system restore to set Windows in a few days (only works if you have recently changed the password).
- Logging in as a different admin account and then reset the password for your existing account (works only if create you an alternative admin account).
- Log in as administrator mode without failure, then reset the password for your existing account (works only if you have activated the account administrator and know its password).
- Insert your flash drive USB with the password key file (only works if you have created such a keyfile).
- Check your paper files (works only if you threw down the password somewhere)
If none of these standard precautions work for you, then the remedy will be painful. Post again if this is the case.
-
Hello..
Summer paid dues for that month has not been activated yet photoshop & lightroom, what is the problem?Hello
Please contact support by calling/chat for billing queries.
Reference Support FAQ: how to contact Adobe for support?
Hope that helps!
Kind regards
Sheena
-
Qosmio G40-10 s - driver software for device has not been installed successfully
I get a message...
Software device driver has not been installed successfully.
Memory PCI controller... failedIs this a problem with my laptop or software that has been loaded. Now on Windows 7 32 bit Vista
Hi spudcam,
This means that for the memory controller PCI is no driver installed?
Well, it is difficult to say which driver you need exactly and Windows 7's official is not compatible with the Qosmio G40.
AFAIK memory PCI controller is Intel Turbo Memory module, so you would need Robson package driver of the official website of Toshiba.
Now, I looked on the page of Toshiba and guess what, it s is available for G40 and Windows 7. :)Check this box!
-
fgasdfgsdfagasdfasdf
Log, activation, or connection errors. CS5.5 and later versions
Mylenium
-
I looked at the number on google. He brought to the top of this forum. I tried the solution that looked like it would work for me. I opened it in Mode safe mode with networking as suggested and got no where. A reset disk did not at all. Is there another way I can reset the password? Thing I can do?
Hello
I suggest you visit the link below and check if this can help:
http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password
You can also check:
-
My wife has photoshop but the install a new drive. It is downloadable somehow without having to buy it again?
Hi josephk75334669,
Please let us know what version of Photoshop, you must download it to.
You can download the stand-alone versions of: other downloads
If it was Photoshop Creative Cloud then use the following link: Adobe Creative desktop Cloud | Adobe Creative Cloud
Kind regards
Sandrine Bani
-
How can I add the "open a new tab" plus button back to tabs & bookmarks to the menu bar? I was able to click on and drag the bookmarks and folders containing the bookmarks in the menu bookmark to a bar of tools and click the tab + button was always on the right side of a tab before seeing ff 13.0.1 on windows 7.
I need back, areas have red around em
http://i48.Tinypic.com/25gue0x.jpg
Draggin ' bookmarks toolbar items, it's done. Thank you for the mind can.
-
Default password for the root has not been changed... but there.
I have a problem with a server ESXi in VCenter which reported that following:
Configuration problems
The default password for the root user has not changed.
However, on the server, we changed the default password to our standard from the console. Is there something that needs to be done to update VCenter to check or something? It marks the host as a warning so it is certainly misleading people.
Thank you.Hello and welcome to the Forums!
If the ESXi host is empty, a reboot will probably clear the message. In addition, to restart the management agents would probably erase as well.
-
I recently turned on my laptop and my profile/account has not been recognized.
I recently turned on my laptop and my profile/account was not recognized during the startup of the computer toward the top, so a temporary account/profile is used instead. I did some work saved information on the computer using this temp-account profile. My regular account/profile has been recognized at every time since, but I was not able to find the location of the temp profile/account or the information stored when using this profile/account temporarily. The profile was not a guest account or an administrator account. That's only 2 accounts visible to me. There is only 1 account on the laptop so I actually disabled guest accounts.
the laptop is running windows vista
Hi Eric J Kim
After you log on to a Windows Vista system with a temporary profile, any changes you make on the current desk are lost once you disconnect the system
http://support.Microsoft.com/default.aspx/KB/947242
Ken
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
My computer has stopped recognizing all external hard drives.
He returns constantly with a 32 error code, saying that the disc has been disabled due to problems. I uninstalled and reinstalled two usb ports, I tried ASUS live update but it was a no go as well. I also tried to remove the uppoerfilters and the lowerfilters, but unfortunately, lowerfilters does not exist on my computer. I'm completely lost, and I don't know if anything else will not work.Im not sure of the version of windows on my computer, I use an ASUS zenbook if that helps.Hello
1. what operating system is installed on the computer?
2 has there been any changes made on the computer before the show?
3. when exactly you get the error message?
To determine which version of the Windows operating system is installed, see:
What version of the operating system Windows am I running?
Method 1:
Check the link and try to run the Microsoft Fix it:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2:
I suggest you to disable and re-enable the USB controllers:
a. click Startand then click run.
b. type devmgmt.msc, and then click OK. Device Manager opens.
c. expand Bus USB controllers.
Note: You need to scroll the list to find this point.d. right-click the first USB controller under USB Bus controllersand then click Uninstall to remove it.
e. Repeat step 4 for each USB controller is listed under Bus USB controllers.
Note: restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
-
Satellite Pro A60: Generic Host Process for Win32 Services has encountered a problem
Satellite Pro A60 - Win XP Pro SP2.
I recently started getting this error:"Generic Host Process for Win32 Services has encountered a problem and needs to close." We are sorry for the inconvenience. »
and I was wondering if there are any known issues specific to Toshibas or specific to the operating system?
Any guidance advice appreciated.
Well, it could be a virus or malware.
I recommend you to update all your anti anti-virus applications and if you have not installed a program such as ad-aware or spyware so you need to do.Check if your all the service pack are up-to-date. Last use the installtion of new OS could help
-
I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.
Hello, Pichon,
If Windows Vista application unexpected activation
On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.
If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:
- Click Start, and then click computer.
- Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
- Select the Windows Vista activation method that you want, and then follow the instructions.
To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.
To update to Windows Vista and prevent this activation problem does not happen:
- Click Start, click all programs, and then click Windows Update.
- Click find updates.
- As soon as Windows Vista found the updates, click the install updates button.
How to activate Windows Vista
http://support.Microsoft.com/kb/940315
Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet
-
Install CS5.5 and use the license for CS6.0?
Hello
I have a license for CS6.0, can I install CS5.5 and use the license for CS6.0?
I don't want to install CS6.0 because all users have CS5.5
If it s not possible, what is the alternative?
RobbaN
@Robban, just to make things clear, for CS6 serial key will not work with the installation of CS5.5, because both are two different applications. So, as Mylenium says, you won't be able to buy CS5.5 now as its not available for sale more.
-
lost the serial number for my ADOBE CS5 product and need to install it on a new machine. Can someone help me?
Hi Hectorc96414045,
Please refer to find the serial number of your product Adobe quickly
Visit also Download Adobe Creative Suite 5 products
Please let us know if it helps.
Kind regards
Shelly
Maybe you are looking for
-
Recently, I updated to Firefox 27 and noticed really horrible performance (Manager tasks indicates FF connecting a carrot, frequent "Firefox is not responding messages", even strikes in late development in the URL bar). It's on an Ideapad s205 (AMD E
-
Satellite A30 - fan still working
Hello My Satellite A33 (although the case said A30 my model number indicates otherwise), there are problems of overheating for some time now, the fan always runs at full speed. I'll have to raise the notebook so that the fan can get more air. I'm not
-
Hello I'm trying to get the user name in an application. Thanks to a property to the user name node works very well in the development environment, but once the vi is built in a file exe, it fails. Also tried exec system to pull the %username% envi
-
Impossible to implement the ratio control
I've already posted a question about how to store the values of the previous variables in labview, but do not have all the answers. I hope this time I will get some advice or rather the solution. I have three parameters A, B and C (they denote percen
-
1 channel of my audio is crossing on the WME 9 flow
I use Windows Media Encoder 9 for videos. The problem is that only 1 channel is broadcast, while the other channel, periodically fades to low. 2 audio bars both show also on display in WME during encoding. How can I start to find a solution for th