Yet the startup error code: 1

Hello. I have a problem. When I start again I get an error: "Configuration error, please reintall the program" I have reinstall but it did not help.

Pre-training system:

-Windows 7 64 bit Service Pack 1

Please help really is important!

Encore error 1.png

(Polish language)

Error code: 1

I don't know what you have tried since there are several options to these links.

You reinstall? If so, have you run the cleanup tool after uninstalling?

Tags: Encore

Similar Questions

  • Where in the event error Codes BSOD Windows XP store Viewer

    As the title States where Windows XP Professional SP3 with 0 x 86 stores the error logs when a blue screen happens? I can not find I checked in the system log, but could not yet identify the BSOD error codes. I activated to connect with these error codes when it occurs.

    Can someone tell me where to find the error codes to stop Windows (BSOD)? Also, if you can describe what the entry will look like it should help.

    Thank you

    Victor

    VM

    You have several questions.

    1 - this one accident was linked to Redlight. sys with description BufferZone Kernel Module is a driver file of the BufferZone belonging to BufferZone product company.  That needs to be removed (at least for testing)

    2 - cumon

    Associated cumon.sys driver filter system provider (R) Win 7 kit Windows DDK CRCMon (it's a minor issue)

    3 - cmuda.sys related to cmuda.sys C-Media Audio Driver (WDM). YOURS IS 2002

    How to find drivers:


    -Google search for the name of the driver
    -compare Google results with what is installed on your system to determine on what device/program, it belongs to
    -Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
    s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right program

    The most common drivers are listed on this page: driver reference

    http://www.carrona.org/dvrref.php

    http://SysNative.com/drivers/

    -Driver manufacturer links are on this page: http://www.carrona.org

  • received the 0x800106b5 error code when trying to open windows defender

    I can't open windows defender, when I tried, it will display an error message, the 0x800106b5 error code. Hope someone can help me solve this problem

    Hello

    I think you may have the incorrect error number

    are you sure this isn't: «Error 0x800106ba»

    read this information on the Defender:

    ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

    the basics of Microsoft security has its own version of windows defender

    and other anti-virus programs use their own particular type of application to scan for spyware and malware

    It of nothing to worry and is the default action, which is designed for them to do

    If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

    http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

    and here is the method to remove it from startup in vista

    http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

    and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

    http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

         and read this information to microsoft:

    Error message when you run Windows Defender: «Error 0x800106ba»

    http://support.Microsoft.com/kb/931849

    and if you need to change startup programs read this information on the other methods of doing it without using defender

    using msconfig read this tutorial:

    How to use MSCONFIG in Windows Vista

    Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

    http://netsquirrel.com/Msconfig/msconfig_vista.html

    and also try this FREE program Autoruns:

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  • __Windows Setup has encountered an unexpected error. to install the reboot, the installation error code 0x0

    I have an Asus f3sv with vista home premium (32 bit).  I am trying to install Windows 7 Ultimate (32 bit)

    During "the installation program copies files", I get

    "Windows installation encountered an unexpected error. to install restart, the Setup error code 0x0 ".

    I went through and removed all the programs windows Upgrade Advisor said that I had to delete.  disabled the antivirus and have rebooted several times

    When I tried in safe mode it says I could not install in safe mode

    When I booted from the disc in copied files, and then when I said I wanted to update to the appropriate Vista installation.

    I decided to copy the filed on the hard drive and it's vista blue screen

    I copied the files on the hard drive (in safe mode) and tried to start the installation of the copy.  I get the following error

    Windows could not create a Setup folder 0x8007000D error code

    I can find nothing in the forums with the same problem.

    Check your hard drive for errors:
    Click Start
    Type: CMD, according to the results, right-click CMD
    Click on "Run as Administrator"
    At the command prompt, type: chkdsk /f /r
    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.
    User account control permission
    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
    2. in the general tab, click Selective startup.
    3. under Selective startup, clear the check box load startup items.
    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
    5. click on OK.
    6. When you are prompted, click on restart.
    7. after the computer starts, check if the problem is resolved.

    Could you try to reinstall Vista and proceed with a flat installation?

    To proceed with the installation plate, follow these steps:

    1. Insert the Windows 7 installation disc.

    2. start Windows Explorer.

    3. in Windows Explorer, click to select the drive for the Windows 7 installation disc.

    4. in theEdit menu, click select all .

    5. on the Edit menu, clickcopy .

    6. Click to select the hard disk you want to contain the flat installation files.

    7. on thefile menu, point to new , click folder , typeWindows 7 Setup and then press ENTER.

    8. double-click onthe Windows 7 Setup and then click Paste on the Edit menu.

    9. double-click onSetup.exe and follow the instructions that appear.

    For more information about dish install, please visit the below mentioned link:

    http://support.Microsoft.com/kb/928902

    Note: KB talking about the process involved in Vista, but it applies even to Windows 7.

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • I can't drag and drop files in the trash, error code-43 is detected, what should I do?

    I can't drag and drop files in the trash, error code-43 is detected, what should I do? What is an error code - 43?

    You can't empty the trash or move a file to the trash

    If the above does not help, then see below:

    Visit The FAQ XLab and read the FAQ on the waste problems. You can also try using Trash it! 5.1 to solve the problem. Or you can try this:

    Open the Terminal in the Utilities folder, and paste the following at the command prompt:

    sudo rm - Rf ~ /. Trash

    Press RETURN. Enter your administrator password when prompted. It will not echo to screen. Press RETURN again.

    (Someone should tell you that it is dangerous or useless, please disregard the comment.)

  • Executable cannot find the custom error code file

    I'm building a LabVIEW 2013 application on a Windows 7 computer and deploying it to a Windows XP computer. My application has a custom error code file, stored in -- errors.txt, but my executable on the Windows XP machine can't find the custom error file and returns only the string of appeal for all errors that occur.

    When you use is not an installer, I tried to copy the error code at all locations listed here: http://digital.ni.com/public.nsf/allkb/6077DBEDA4F9FEE3862571F600449501 but the application still does not load the custom errors. I have the box checked to "Error Codes customized Include" in the construction specifications.

    When an executable of construction and the development of Windows 7 to XP, where do I put the custom error code file? It is found in Program Files (x 86), but find not because it's XP?

    It's been a few months that I posted this question and I do not know if someone cares about this track, but the solution I found was to put the custom in error code file \National Instruments\Shared\Errors\English\

    There are other places that the runtime will look for the custom error codes (I tried all the ones listed above), if the same error codes exist in 2 places the error popup will appear two error messages. Error default 1, it looks like:

    LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
    =========================
    NOR-488: Command requires GPIB controller charge controller.

    So if you have a custom error code file and it is available in 2 places that LabVIEW RTE check error codes, you will get the same message before and after the =.

    List the error as "still included" file when building the executable or by checking the box to include files in error did not tour, obviously. Unless you create a Setup program to distribute the application, the error code file must be moved manually. Shared\Errors file works best for me because it's a place that makes sense.

    Also, don't worry - it doesn't me taken 5 months to understand this point, I do not update all my loyal followers (ha) with a solution.

  • Irulu Tablet-im trying to install applications like facebook and he repeats the 0x803F7000 error code and this applies to any application in the store

    Help please try to install my new Tablet irulu and the app store will not let me install anything k get the 0x803F7000 error code

    Moved from the community involvement Center

    Help please try to install my new Tablet irulu and the app store will not let me install anything k get the 0x803F7000 error code

    Moved from the community involvement Center

    It's an Android tablet, no? The Microsoft Community is not the best place to get help with Android.

    Try to support at https://www.irulu.com/

    or

    the Forum of Irulu to the http://forums.androidcentral.com/other-tablets/236406-irulu-tablet.html

    Don

  • Windows Update fails to run and get the C800044E error code

    Windows Update does not check the updates and I get the C800044E error code.  So far, thi is what I did:

    Get the C800044E error code when you try to run Windows Update.  Tried Mr. FixIt, who did not work and tried to do what does not work also:

    Please, try the following suggestions to see if the problem can be solved:

    1. click on Start, type notepad in the start search box and press ENTER.

    2 copy and paste (or type) the following command lines in the Notepad window:

    net stop wuauserv

    CD %systemroot%\SoftwareDistribution

    Ren Download.old download

    net start wuauserv

    3. on the file menu, click on record under and type Rename.bat .

    4. click on save as type and then click on all files (*. *) .

    5. save the Rename.bat file to your desktop.

    6. right click on the Rename.bat file, and then click run as administrator .  If you are prompted for an administrator password or for confirmation, type the password, or click continue . It renames the download folder.

    7. try to install the updates again.

    8. If the problem is resolved, delete the Rename.bat file that you created in the previous steps.

    any other ideas?

    Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

    Is this a sudden, new problem?

    Are you having difficulty he run in http://support.microsoft.com/default.aspx/kb/971058 and don't you run it in default and aggressive modes?

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • VISA IC returns the 0xBFFF003A error code when reading the USBTMC device

    Hello

    I'm creating a USBTMC device and have some difficulty to determine why a viRead returns the 0xBFFF003A error code. Strangely enough, it reports also to read the correct byte number and the buffer contains the correct data. I use VISA IC 5.1.2 but I had the same problem with version 5.0.3. I have no problem with the device recognized by VISA IC, MAX, LabVIEW SignalExpress or LabVIEW. Using the previous version of VISA IC performing an async read would return a code completion, 0x3FFF009B (VI_SUCCESS_SYNC).

    The attachment of the utility Trace all communications from e/s or watch for when the USB cable is plugged into the computer.

    Lines 1-18 LabVIEW SignalExpress 2011 has begun

    Lines 19-35 VISA IC: open the selection

    Line 36 VISA IC: claire

    Line 37 VISA IC: Read - 10 characters

    Line 38 VISA IC: Read - 21 characters

    Lines 39-44 LabVIEW: open, read 21 characters

    Line 45 VISA IC: Read - 18 characters

    Line 46 VISA IC: claire

    Line 47 VISA IC: Read - 18 characters

    Line 48 VISA IC: closed

    Note: LabVIEW crashed on line 44.  At the moment I know not whether that is related to this problem or not.

    Full error description: failed to start the read operation because the installer is not valid (because of attributes defined in an inconsistent state).

    I'm confused by why it says it cannot start operation when in fact, it returns the requested data and attributes that it refers to? I reviewed the USB descriptor values that I use, and they look correct to me.

    Any ideas?

    Thank you

    Hi Perry,

    I found the problem.  The TransferSize didn't get converted from big-endian to little endian and 0x0A was considered 0xA000000.

    See you soon,.

    Airaki

  • I get the following error code 80070bc9 when you try to do window upsdates

    I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.

    Hello Kristen,

    Follow the steps mentioned below:

    Step 1:

    Temporarily disable or uninstall the security software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Step 2:

    Reset components Windows Update the link below:

    How to reset the Windows Update components
    http://support.Microsoft.com/kb/971058

    Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.

    Hope this helps

  • Notice of default on Microsoft update for product SQL Server 2005 Express Edition Service Pack 3 (KB955706) and the 0x2B2F error Code

    I get a failure notice when trying to make an update of Microsoft for the product SQL Server 2005 Express Edition Service Pack 3 (KB955706) and 0x2B2F error Code.  What should I do?

    Deana E Hi,.
     
    Welcome to the Microsoft Windows answers Forum community!
     
    You receive the 0x2b2f error code when you use the web sites, Windows Update or Microsoft Update to install SQL Server 2005 Service Pack 3 on a computer with MSXML6 Service Pack 2 is already installed.
     
    Follow this link for the reasons: http://support.microsoft.com/kb/970674
     
    Follow the steps in the link below for "SQL Server 2005 Setup fails when MSXML Core Services 6.0 Service Pack 2 has been installed"
    http://support.Microsoft.com/kb/968749

    http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/
     
    I hope this helps!
    Thank you, and in what concerns:
    Aziz Nadeem - Microsoft technical support.
    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

  • Windows some updates not installed the 646 error code

    Windows some updates not installed the 646 error code

    See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/5300b50a-dfcd-42fb-9785-ab52f2ee1796 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • tried to download the Vista SP2, always get the 8024200f error code - what's the problem?

    What is the 8024200f error code? Vista SP2 is essential?

    [The] Norton [free trial had] has been expired for more than 1 year [before installing Avira AntiVir]

    Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

    Ideally you would have uninstalled the free trial and then download / run the Norton Removal Tool and then installed the antivirus of replacement before the expiration of the free trial period.

    That being said, see if running the removal tool now & a few resets solves your problem:

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    4 for good measure, reset Windows Update by...

    How to reset the Windows Update components?
    [Tip: run the difficulty mode by default and aggressive ]
    http://support.Microsoft.com/kb/971058

    NB: Access KB971058 via Internet Explorer (32-bit), not any other browser.

    5. also, for good measure, reset the IE advanced by http://support.microsoft.com/kb/923737

    6. restart & test.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Whenever I try to install these two windows automatic updates, I get the 8024200d error code

    I try to install the KB943411 and KB933928 updated, but I get the 8024200d error code. I'm running on Vista Ultimate (without SP1), and I do it through Windows Update.

    Hi BobTheDude,

    I suggest you to follow these steps and check if it does the work for you:

    ·         Follow the resolution 2 in the article
    http://support.Microsoft.com/kb/947366

    ·         Download and install the latest Windows Vista application compatibility update in the link mentioned below:
    http://support.Microsoft.com/kb/963699

    ·         Rename the Catroot2 folder

    To rename the Catroot2 folder, follow these steps:

    1.

    Click Start type cmd and then click OK .
    Right click on cmd and then click run as administrator .

    2.

    At the command prompt, type the following commands and press ENTER after each line:

    net stop cryptsvc
    Ren %systemroot%\System32\Catroot2 oldcatroot2
    net start cryptsvc
    output

       

    ·         Empty the software distribution folder

    1.

    Click Start type services.msc , and then click OK .
    Click right services.msc and then click run as administrator .

    2.

    In the Services (Local) pane, click automatic updates , and then click stop .

    3.

    Reduce the Services (local) window.

    4.

    Select all the contents of the Windows distribution folder, and then delete them.

    Note By default, the Windows distribution folder is located in the
    drive : \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.

    5.

    Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.

    6.

    In the Services (Local) pane, click automatic updates , and then click Start .

    ·         Disable security software

    ·         You can download and install the stand-alone package includes updates that failed
    KB943411 - http://www.microsoft.com/downloads/details.aspx?familyid=A7BB4622-FB21-4769-B29A-7FC7A07D182A&displaylang=en

    KB933928 - http://www.microsoft.com/downloads/details.aspx?FamilyId=DC2AD07B-D5D7-407A-9A0E-3F3D142682D0&displaylang=en

    Please let us know if it helps.

    Thank you and best regards,
    David

  • Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

      I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

      Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

      OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

    keimanzero,

    Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
    First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
    NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

    Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

    Secondly, I suggest that you run the File Checker system while in the same clean boot state.
    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the field search programs and files .
    2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
      If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
      sfc/scannow

    When the analysis is complete, test to see if the problems facing the system have been resolved.

    If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

    Expert MowGreen Windows IT Pro - consumer safety

Maybe you are looking for

  • How to create crankshaft sensor signals Hall

    I want to create a waveform with LabVIEW 8.6 and output for oscilloscope via NI PCI-6221, but I don't know how to do. So I would ask you advise and technical support, please. The waveform is attached for you reference.

  • r200nq: r200nq Windows7 driver wireless

    Hello I made a new clean install of Windows7 and I can't get the wireless operation. I installed the drivers of network support.hp.com, but no wireless icon in the lower right corner. In Device Manager, I have one other devices branch, where the netw

  • A program with an unknown Publisher needs your permission to start. __

    A program with an unknown Publisher needs your permission to start.

  • Site talk multihomed won't neighborships EIGRP on both lines

    Hi all This problem has been stripping my cabbage for about a week now. I have a lot of sites spoke on the seat. We have two routers in hub acting as primary and backup for all sites, a 13Mb SDSL and a 2 MB SDSL respectively. Exclusively use the GRE

  • Duplicate SYN dumped by FWSM package

    Hello I am a newbie to network and you have a question about FWSM (Version 3.2 (7)).  Is it the FWSM by default drops in double package SYN TCP 3-way handshake?  Traffic is between the internal and external interface. Thank you Network Newbie