you are looking for the same contact again and again

Similar Questions

• You are looking for the CSS property in the path of the Charcoal_Grey to change the font size in the sidebar of OCD (ResponsiveHTML5)

  Hello

  It's the same question here for Theme_1 Standard: the response has been

  For this layout:

  Office: div.wTOCTree

  Mobile: div.wTOCNode

  William van Weelden

  I do not have the same properties in one of these places:

  

  Nobody knows what the right properties change for that police smaller TOC for the Charcoal_Grey layout? I'm afraid that if I started fooling around with it I'll do something irreparable. On that note, if I want to copy the entire project so that I do not have a test environment, is there a SAVE as feature of type, I can only see RENAME (my apologies for the 2-iron-1 issue).

  Thank you

  Anne

  Charcoal Grey, you will want to use the SCSS to generate CSS instead. (See; ( Layouts and RoboHelp screen profiles)

  The selection you are looking for is: % TOC-Office-theme3

  Add a font size to this item and it will scale you provide. (Use of measures of the MA for best results. The rest of the content also scales with the help of em.)

• The manufacturer of Distribution Kit is the engine Variable OR in an old distribution you are looking for, can't find it and fails to build

  I can't build a distribution kit, because the Builder seems to have saved a path to the NI Variable engine that is not valid.  I seem to have the Variable engine OR installed.   There is NEITHER Variable engine 2.5.0 fichiers.xml loaded on my computer (see the attachment for the list of loaded drivers).  I don't seem to be able to break the bond of the CVI at my recent installers for drivers.  I tried to create a new installer, but had the same problem.

  I'm running a 64 bit computer laptop with Windows 7, a 32-bit application, CVI generation 2010 running.

  The default path is the path to any distribution installed OR engine Variable on your machine. For example, if it has been installed from a driver disc, the path would probably be D:\. However, since the images you posted, I see that you were being asked to provide the path to one of your previous ATAHM distributions. It has been home to this path:

  c:\Users\chill\Documents\Development\AATAS\ATAHM\distributions_ATAHM\ATAHM Oct 24 BitDefender 2011\

  Do you still have this distribution? If you can point to this distribuiton, you should be good.

  Now back to the error you saw... Your version of this manifest .NET file matches (except for the version number) review from the Base of knowledge, so you should try to replace it with Revision B (rename it to .xml NI .NET Framework 2.0 Language Pack x 86 Installer {F8ECD2D6-659C-49EB-8454-5F8F7B526FCF}). Make sure that you restart CVI after the file-swapping. I think that in order to solve your problem. If it isn't, you need to let me know what is the new number, or if you somehow still see the same error message.

  A. Mert

  National Instruments

• You are looking for the type of virtual card - IE VMXNET / e1000 in MOB

  Hi all

  Can someone indicate where the exact virtual machines virtual network adapter type is stored in the CROWD? I'd like to see if it is listed, but have had trouble finding whether there is indeed available.

  PowerCLI is easy - just do Get - VM | Get-NetworkAdapter can show maps of different types. How can I find this in the MAFIA?

  Thank you!

  Hi Shoganator!

  The concrete virtual ethernet card types are modeled as classes of DataObject VirtualEthernetCardsup. It is in the MAFIA, you have to go through the table of device [VM.config.hardware.device] and click on the individual elements of the array. The table suggests to be key in function and it seems that currently the ethernet cards start key 4000.

  That is clicked once on the entry of the table corresponding to the 4000 button and after the look at the top of the of the CROWD where we can read the Object Data Type. This is the type of the NIC in question.

  Currently four types are known:

  • VirtualE1000
  • VirtualE1000e
  • VirtualPCNet32
  • VirtualVmxNet

  I included a page for clarification, I hope this helps :-)

• You are looking for the block CD build based on the time for MPC simulation.vi

  Hello everyone! I'm trying to implement MPC in LabVIEW. I downloaded some code that shows the implementation. My question is in these codes that I see a named block as CD build based on the time for MPC simulation.vi. I tried to find a lot of this block, but I could not... Can someone help me with the problem (exactly under what section I get this block) or can someone tell me how can I give the profile of setpoint for the problem of simulation MPC?

  The associated screws to generate the profile found in:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2011\vi.lib\addons\Control Design\_MPC\Reference profile

  or

  C:\Program NIUninstaller Instruments\LabVIEW 2011\\vi.lib\addons\Control Design\_MPC\Reference profile

  You can look at examples of:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2011\examples\Control and Simulation\Control Design\MPC

  C:\Program NIUninstaller Instruments\LabVIEW 2011\examples\Control and Simulation\Control Design\MPC

  to check the use of these screws

• You are looking for the driver for «Toshiba Multimedia Center Audio/Hub» floppy

  Hi all

  I'm currently looking for driver for my Toshiba Center Multimedia Audio Hub, because I lost the installation disc.

  Can someone tell me where to find the driver? Or everyone is nice enough to load the driver disk?

  Thanks in advance.

  Hi firefox123,

  Go to the driver download section: http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

  Then select:

  Options--> Office based accessories--> Multimedia Center--> OS independent

  Best regards

  Maurice

• You are looking for the change of the value set in a large set of records

  I have a table with hundreds of millions of records

  PERSON_ID,

  WEIGHT,

  DATE_TAKEN

  -It is possible that a person has a single folder ie weight was measured only once

  -It is possible that a person's weight was measured twice or more on a single date

  I need to get on a list of people (PERSON_IDs) that:

  1. at least one penny above certain trashhold ie TRASHHOLD1 = 100 kg; This can be hard-coded.

  2. and while the weight of the person of (1) dropped more TRASHHOLD2 then = 20 kg in any suite (must be later) measures

  I'll try to find the fastest possible solution using Oracle 11.x and in any client IE SQLDeveloper

  Just noticed your reply to Justin says times 1 & 2 must be selected. This means you want to threshol1 or more, rather than threshol1. My code should use > =: threshol1. The following corrected code:

  with t as)

  Select person_id,

  weight,

  case

  what weight > =: period1 - equal or more: statement1

  then (weight) min on)

  person_id partition

  order of date_taken

  lines between the 1 suite and unlimited

  )

  end min_susequent_weight

  of weigh_in

  )

  Select distinct person_id

  t

  where weight > = min_susequent_weight +: Seuil2 - lost: Seuil2 or more

  /

  PERSON_ID
  ----------
  1
  2

  SQL >

  SY.

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• When you are looking for an email or a contact or meeting I get the message "cannot be found" when I know for sure that the article in question is here. I usually resort to trawl through lists of A to z and always find it... helpplease?

  I have loaded all the MS Updates surrent

  Daithi MacSeinichin Hello,

  Welcome to the Microsoft Answers Community!

  You have Windows Search 4.0 installed on your computer?

  Windows Search 4.0 will allow you to search through your contacts, emails, appointments and text documents just to name a few. To access Windows Search 4.0 after installation:

  ·         Click Start

  ·         Click on Search

  ·         To the right of the blue bar at the top, you can click a menu dropdown and search more precisely what type of document you are looking for

  You can download Windows Search 4.0 to:

  Windows Search 4.0

  Hope that helps, I look forward to hearing from you.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.

  You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.  They will have to copy the files in the folder to make changes and then copy a review of back in.  Locally and on the network

  Hello

  1. In Windows Explorer, right-click the file or folder you want to work with.

  2. In the context menu, select properties and then in the Properties dialog box, click the Security tab.

  3. In the name list box, select the user, contact, computer, or group to which you want to display permissions. If the permissions are grayed out, this means that the permissions are inherited from a parent object.

  https://msdn.Microsoft.com/en-us/library/bb727008.aspx?f=255&MSPPError=-2147217396

• Often when I return to my home page, I get this message: unable to display the page of the page you are looking for is currently unavailable.

  The only time where I get this message "cannot display the page of the page you are looking for is currently unavailable ', is when I come back to my Yahoo home page after visiting other websites and click"home. " My SSL settings are correct; I tried to clear my cache, log out and go back online, repaired broken clusters, etc. I'm out of ideas.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• You are looking for an application unzip the files on iMac

  You are looking for an application unzip the files on iMac. I can find lots of 3rd party applications, but how do I know that they are safe? When I look in the app store, they say for iPhone or iPad can I use one of these?

  THX

  1. There is usually no additional software to do so; Simply double-click the zip in the Finder. If this method does not work for any reason, use The Unarchiver.

  2 No.

  (140768)

• You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term.

  I get error frequently below.  In General, when you navigate on old posts on the forum SQL and PL/SQL, after reading a post, I click on the left arrow in my Firefox browser, which I expect to take me to the page of the posts that I had.  Instead, I get a page with no messages.  I then click on a forum page numbers in the upper right corner.  Sometimes brings back me to the page that displays the list of the posts that I had.  However, more often I get the below error.  So try to navigate from one position to another is desperately slow.  You can fix this?  Everybody brings a work around to be able to get from one station to another, or at least back to old messages without the error page?  This is a problem that happened before and after the upgrade.

  "You have reached the maximum of pages in this set of results of content. If you are looking for something specific, try applying a filter of content type or enter a search term. »

  Have you tried right-click (ctrl-click on Mac) and choose 'Open link in a new tab' instead? With all the dynamic html today browser back and before options are often dead still. If you open links in a new tab or window, you can simply close the window instead of using the back button. It may take awhile to get used to it, but there are some benefits, such as the loading of the pages in the background, and you do not lose the focus of the page where you. You can disable "when I open a link in a new tab, swtich it immediately." If I understand your problem, maybe it works better.

• You are looking for a search button to the site of Muse. MuseThemes does not work

  You are looking for a search button to the site of Muse. MuseThemes is not an option, because it requires $70, a one year subscription. I do not code. Muse is working on a search widget?

  Please check the available options:

  http://musewidgets.com/collections/all/search

  Thank you

  Sanjit

• Check boxes are displayed incorrectly < input type = "checkbox", "checked" > in 4.0.1 when they are fine for the same page in 3.6.17

  Check boxes are not displayed properly checked < input type = "checkbox", "checked" > in 4.0.1 when they are fine for the same page in 3.6.17

  Maybe you can try to use controlled instead of "checked".