You can easily switch to a line of code

Similar Questions

• You can choose to have a line draw outside the rule?

  Hi guys, I played with the app, and although I liked most of the features I find the somewhat paradoxical rule.  When you use that your brand is centered above the guide line which is very well when you draw with a brush but really a problem in larger sizes because you don't know where the line ends to the top of each side, you must estimate based on how wide brush selected.

  ILLUSTRATOR obviously has the ability to stroke inside, outside or on top of a path. Which capable to draw?

  Hi Kit,

  Right... The line is in half and half I can see your point (and other people have mentioned as well) that it is difficult to understand where it will end at times. I also see how have a setting for this would be helpful. I will share your comments with the team to draw.

  Thank you for taking the time to post.

  Sue.

• Is it possible to view several RSS STREAM at the same time, but also the tag each article, so you can easily know who feed it comes from?

  I have a bad setting to the top of my RSS. I'm trying to do a single folder, put several RSS feeds inside, view the output of each stream RSS feed in the main folder and add an identifier for each article that told me that he feed came in a blink of an eye.

  See below for a crudely photoshopped example of something like what I hope to accomplish.

  You can configure a filter for messages from tag based on their website link corresponding to the custom Content-Baseheader, as described in the guide. Then, you can create a virtual folder of saved search as a subfolder of the folder that contains subscription main power. The saved search folder criterion would be the specific tag; the file can have any name. In this way, see you all the messages of all streams in the main folder and can focus on a specific stream by selecting the saved search subfolder.

• You can easily reverse effect in Premiere CS4 parameters?

  Suppose I have an effect developed, maybe the ripple effect, then blur, opacity melted out of text.  The effect begins with the text usually showing then when it starts, the undulations, blur and opacity start until the text has disappeared.

  What would be nice, rather having to reverse engineer these effects by in the opposite direction, is there a way to save each of them as a "Preset" but also apply them in reverse and then save THAT as a "Preset" too?  Many years (12 to be exact) in my Ribbon days and using Pinnacle Alladin, you might build an effect and then click a checkbox and it instantly reversed everything.

  Premiere CS4 there?

  Thank you.

  The right KF move left and move right left KF.

• My task manager he suddenly lost control bar at the top, you can not switch between the screens. What is happening and how to fix it?

  A couple of months back, my task manager, the opening showed 1 screen (no options for other screens on the tool and the control bar has lost.  Have tried everything (obviously not the right one) to fix it.

  Double click on the white strip at the top of the window.

• You can install an email template, similar to the HTML design for all emails?

  Is there a way of setting Thunderbird that you can install a HTML e-mail template, or you can customize an e-mail so that it has the appearance of refined HTML. I don't know, maybe I should tell of stationery, but I want the template e-mail and signature to be incorporated 1/document format. Mozilla offers all type of creator of email that would allow me to drag and drop, without knowing HTML code? I just need a way to start over.

  Finally, I am the CEO of a not-for-profit organization and have desperately need a good person paid in graphic design to implement all these things for me. I also need a new logo, letterhead, business cards, other various printed products paper and possibly a few Web site design/redesign.

  Because of the urgency of this issue, you can email me directly, Erik, to [email protected]. I am registered with the IRS in non-profit institutions legitimate 501 c 3 and could offer you compensation giving you a tax writing for all of your services.

  I'm also in desperate need of a grant writer/applicant.

  Thank you and have a great week.

  Erik

  You can easily create your own email template.

  You must have HTML enabled composition.
  Different methods of location of the 'account settings ':

  • Via the toolbar "Menu Bar":
  • "Tools" > "Account settings" > "Composition & addressing" for the e-mail account

  Through the pane of folders:

  • Right-click on the name of the e-mail account in the folders pane, and then select "settings".
  • then select "Composition & addressing" for the e-mail account

  Via "Menu Icon.

  • Menu icon > Options > account settings > "Composition & addressing" for the e-mail account

  "Select compose messages in HTML format"
  
  Click OK

  Then, open a new message 'write '.
  You should see the "formatting Bar" below "subject" and above the area of publication.
  "Formatting" bar you different heading colors, the fonts, the fonts and the background, bold, insert images, tables, links etc.
  You can use a 'Table' to help organize the place where you position points.
  The options "insert" and "format" in the "Menu" also offer options for formatting, for example: Format > properties of the table cell.

  After dialing the e-mail:
  Give it should be "subject", so that you can easily locate this model - note you can always change it before sending more later if necessary.
  Save e-mail as a 'Template '.

  If you have not registered an email as a model before, Thunderbird will create a folder of templates for your emails. If you use make IMAP, of course you have to see the Templates folder.

  To use no matter what email stored in the Templates folder.
  Select the Templates folder
  the "Subject" column to identify the correct model email.
  Double click to open
  "or click on send and select ' change as new message."

  enamel model opens in a new window to write message.
  You can select the people to send, change the subject if necessary, add a few comments etc and then send email.
  The original e-mail from the model can be reused again and again.

  There are a few extensions add-on that can be installed to help the creation and the use of models.
  Stationery

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/stationery/

  Smart Template4 working with stationery

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/smarttemplate4/?src=CB-DL-TopRated

  How to install the addon:
  Download the addon as extension to your desktop or downloads folder.
  In Thunderbird
  Tools > Addons
  or
  Menu icon > Addons

  Click the gear icon and select "install the addon from file".
  Locate the downloaded xpi file and click Open
  You may have to restart Thunderbird.

• You can put the date into a file path?

  My program written spreadsheets. I want there to be a new file daily, entitled the days date, then the data added to the end of the day. Is any way to get the date issued by a ' get Date / Time String "and put in the path to the function"write the spreadsheet"?

  As is - anyone can confirm that a file path in a file writing worksheet is to open the file and one to come is saving and closing?

  See you soon

  Sam

  This better?

  

  As red Rooster have already said, use vi "string of Format Date/time" to not prevent elements of DateTime stamps that you need and also to choose appropriate delimiters.

  Keep in mind that ' / '&': ' are not allowed in Windows file names!

  Also to keep track of all your files in a folder, it is best to name your files 'Year-month-day"instead of the standard ' Monyh/day/year' (for Europeans at least ). This way you can easily find any file in a folder larger.

  You have really two different folders? One of the files before noon and the other for files after noon?

  If so keep this code.

  If not, modify this code!

• Receives the following message after opening a downloaded game: 'Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  Hello!
  So I'm at the end of my rope with this one... it lasts for months, and I keep revisitng every two weeks to try and fix that and every time to be completely frustrated.  I found this forum tonight, so here goes...

  We downloaded a few games on the HP Games Web site.  We download them and everything works fine.  Then, we will open the games and this pop up error message:
  "Windows cannot access the specified device, path or file.  You can not have the appropriate permissions to access the item.

  These games used to run fine, and I have no idea why they now have problems.  We have a Vista operating system, 1 account who is the administrator, the Parental control is disabled (or if we believe).

  If anyone can please help it would be much appreciated!  We have a monthly membership to this site of game and continue to accumulate credits, but may not use it.  It makes us crazy!

  Thank you in advance!

  Hello Heathie,

  Thank you for posting.  It seems that the program is no longer on your computer.  This can happen if the game files are deleted, but the game itself has not been uninstalled correctly.  I recommend you to download the game again to a location on your computer where you can easily find and install it.  This should fix the problem.

  Please let me know if this helps you.
  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• If you delete the free partner site, you can create a new one from scratch?

  Hi all

  So I just saw that a free partner site has been created for me and she seem to include all the features of BC on it (which is great!), the problem is it seems to have a default value of site of BC he likes when you publish your site regardless of the host, and they put their index by default on this subject until you load you own site. Then I tried to chat with a customer representative on this live chat option and he said I could not change the default template that comes to this subject. SO, what is the point to get this free site, if you cannot customize to your taste? THEN I thought, maybe if I delete the site it will give the possibility to create a new free site parter, but this time I'll be that choose the model and other configs. However, I'm afraid that if I delete the site, that's all, I won't be able to create a new partner free site and it and all of its features will be gone forever, that why I post here. Everyone how you can change an existing model does not place, or if you delete the free partner site that is given to you, you are able to create a new?

  Thank you

  Alex.

  Currently, there is not any way to assign a model on the partner site (for example, a model of BC) or one of the sites that sale models BC.

  The best method is to create a test site with the model you want to use, then copy the code on your partner site. You can easily change the files in the site to make it look like you want to only it.

• You can add something, that I created in another program like matlabs or simulink in muse adobe or not.

  I was just looking to see if would work for us because we have dreamweaver but it's complicated for us, because none of us know coding or html. do you think that if we bought it would be for us. We would prefer the less coding as possible because it's very complicated for us. Please let me know what we should do thanks.

  I'm not familiar with Matlabs or Simulink but if they provide "embeddable HTML code", so you can easily add to Muse. (Object---> Insert HTML)

  If yo are not familiar with the code, then likely Dreamweaver is not a good choice until you become more familiar.

• You can change script function?

  Hello world

  I had this script:

  EN search-replace for MS in the cells

  but only in the active document

  //=======================================================================================

  var doc = app.activeDocument,
  _tables = doc.stories.everyItem ().tables.everyItem () .getElements ();

  app.findGrepPreferences = app.changeGrepPreferences = null;

  for (var i = 0; i < _tables.length; i ++)
  {
  app.findGrepPreferences.findWhat = "~ =";
  app.changeGrepPreferences.changeTo = "~ _ ';"
  _tables [i] .changeGrep ();
  }

  app.findGrepPreferences = app.changeGrepPreferences = null;

  
  //=======================================================================================

  I want to run in all open documents

  Thank you

  Teetan

  I think that you can just change the first line to:

  var doc = app.documents.everyItem (),

  Although I have not tested.

  (By the way, there is no reason for the line of app.findGrepPreferences)

  be in the loop!)

• You can connect two anchor points on a closed path?

  I'm trying to draw a line on one side of one form to another, but I want attached it to each path with anchor points and circulate not only in the illustration. Is this possible?  Is it possible for, say, add anchor points to paths that intersect and then remove the excess?

  Usually, when you add a anchor with the pen tool the next anchor point connects to a line (path) between the two. When I put the tool feather on one traced existing, it adds an anchor point to the path, but I don't know how to connect a line from there to another anchor point?

  Like that, but actually connected to path with anchor points.

  Thank you

  Henri

  You can do however by drawing lines and with some effort, making it a compound path.

  

  BTW, the answer is no, you cannot do it, there is no way to do it in Illustrator.

• How to remove the lines of code at the level of the site with different content?

  How can I remove the same lines of code at the level of the site?

  I want to delete all of the code line up to 4000 pages 50 - line 80, but the lines do not contain the same code can not use 'find and replace '.

  Any ideas would be appreciated - thanks.

  SED

  http://www.Panix.com/~ElfLord/UNIX/sed.html

  Can you show us 2 examples of code to remove?

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• This line where you can see your bookmarks and stuff are gone... ! How can I get that back?

  my laptop is 93.1% full so its quite slow work... I was on a website and I tried to click right (I needed to copy something) and the computer was slow, it didn't work. (already happened). so I tried a few times right click and before I new it this line where you can see your bookmarks (and other stuff) had disappeared. ! I tried right click again to see if I could get back, but it did not work. then I tried to turn off the computer and it still does not work. How can I get that back? and if I get it back, all my favorites will be gone?

  Versions of Firefox 3.6 + have a feature to allow the user to hide the Menu bar.

  Press the Alt key to temporarily show the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.
  
  The F10 can also be used on most PCs to temporarily reveal the menu bar.

  https://support.Mozilla.com/en-us/KB/menu+bar+is+missing

• I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy _ @ _. ___

  How can I get a copy of the cd that will work with your old software. I've been trying to get out of my printer and scanner works with the features, it can handle but you need the orginal software cd you can down line load a copy to * address email is removed from the privacy *

  Hi Oscar,.

  Thanks for the post.

  It seems you are trying to download the application printer and scanner. Please answer the following questions, which will help us to guide you in the right direction.

  1. What is the brand and model of the printer?

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Send us more information to help you better, we will be happy to help you!