You can connect two anchor points on a closed path?

Similar Questions

• You can use two dongles Microsoft Xbox 360 to connect 8 remotes Xbox 360 to PC?

  I wanted to just connect 8 xbox 360 remotes for sports games and most of all the 8 beast gang called fighting game player.  Have a dongle that works very well, but you can connect 4 to a dongle. If I had to buy another dongle I would be able to connect four more? Thanks for your time guys.

  Yes, if you can plug two dongles at the same time. You would need more than a port, so it may or may not be, but if this is the case, it will work.

• You can have two printers connected to a computer

  You can have two printers connected to a computer

  Yes you can have
  What is the connection method you use (usb or wireless)
  response with the models of printers

• Get the error message "Windows must be enabled before you can connect. You want to activate now.

  Original title: impossible to activate Windows XP

  I had to reinstall XP Professional. Now, when I start the computer get a message saying "Windows must be enabled before you can connect. You want to activate now? ». When I click on Yes, the desktop backround sometimes nothing happens. the activation wizard does not open and no error message appears always.

  Hi Dale,

  Since you are not able to open a session in normal mode, log in in safe mode and perform a few steps that would help you solve the problem.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Perform the steps mentioned below and see if it helps.
  a: turn on your PC
  b: Press F8 repeatedly , then in Mode safe
  c: Logon as per normal
  (Note: administrator password is usually empty, but I hope you know your password)
  d: Authorize the Office to load completely (who answered "Yes" to continue mode without failure)
  (Note: this is just a long way to say go to Safe Mode)
  e: Click Start - run
  f: type exactly: rundll32.exe syssetup, SetupOobeBnk (then click OK)
  (Note: a single space after 'rundll32.exe' also the Oo are two letter o in "oobe"; capital and the comma are important)
  g: Wait a few seconds (although you won't see any change)
  h : Restart your PC normally (start - stop - restart - Ok)
  i: You will be able to return to the Normal Mode.

  Good day!

  Answer please if you have any questions.

• You can have two stored functions with the same name?

  Hi all

  You can have two stored functions with the same name?

  My version of DB - connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0

  Thank you.

  You can have the same name as long as they are within a package and with different parameters

  create or replace package test_pkg

  as

  function my_func (p1 in number)

  return number;

  function my_func (at number p1, p2)

  return number;

  end test_pkg;

  /

  create or replace package body test_pkg

  as

  function my_func (p1 in number)

  Return number

  as

  Start

  return 0;

  end;

  function my_func (at number p1, p2)

  Return number

  as

  Start

  return 0;

  end;

  end test_pkg;

  /

• How to remove a path between two anchor points

  Hello

  everything is in the title,

  could you tell me please how to remove a path between two anchor points without using the tool Eraser path?

  When I select these two folders and press to remove all disappeared.

  PS: I want to keep the anchor after the removal

  Thank you

  with the Selection tool direct (white pointer), click the path segment (no points) or select slide above without going on something else and tap on delete.

• You can connect Apple TV thru or with decoder

  Can hang you with an Apple TV cable box at the same time

  Depends on your decoder.

  Apple TV using HDMI.

  If your cable box has a HDMI passthrough you can connect in this way.

  Otherwise, why would you want it to go through the cable box?

• You can connect a Mac Mini to a 2 year old iMac?

  You can connect a Mac mini to an older iMac?

  Please define "connect"...

• You can connect a 120 Hz monitor to an iMac?

  I know that the iMac 27 in. 5 k runs the refresh rate of 60 Hz, but you can connect a monitor with a different frequency to refresh computer and have no problem?

  Yes.

• When a second (another) user tries to connect using the connection to distance that a message "select a user to disconnect so you can connect.

  Original title: Remote Desktop

  We have Windows Server 2012 essentials (evaluation version) installed and working.  When connecting to even via the remote desktop connection it works fine, but when a second (another) user tries to connect using the connection to remote, a message "select a user to disconnect so you can connect.  The names of the 2 users are displayed the first is the name of the administrator of the local server and the second is the remote desktop user who was first.  We need at least 3 to 4 remote desktop both users to be connected.  Please advice

  Hi BHARATISRANI,

  Thanks for posting in the Microsoft Community.

  Since you are using Windows Server 2012 Essentials, the question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows Server 2012 Essentials General TechNet Forums

• por cuando voy a jugar juegos most online don't dice that none is you can connect con el servidor

  Cuando voy ajugar UN jurgo online sell me that none is you can connect con el servidor

  en intentado todo pero no arregla is...
  ¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡ayuda!!!!!!!!!!!!!!!!

  Hello

  The forum in which you've posted is for English only.
  Please select your language from the drop-down menu at the top of the page to post your question in the language of your choice. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• When I try to log on I see a pop-up that says: this copy of Windows must be activated with Microsoft you can connect. -Enable yes/no?

  When I try to log on I see a pop-up that says: this copy of Windows must be activated with Microsoft you can connect.   -Enable yes/no? When I click on Yes my screen go black and that's it. Nothing happens. I have windows xp professional. For PC refurbished

  Hi Blue85angel,

  ·         What is the number and the model of the computer?

  ·         You did changes to the computer before the show?

  See the following articles in the Microsoft Knowledge Base and check if that helps.

  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer

  http://support.Microsoft.com/kb/312295

   

  Blank page to activate Windows in the wizard of Windows Product Activation

  http://support.Microsoft.com/kb/314935

   

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

   

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

   

  You can also contact Activation of Microsoft technical support for assistance:

   

  Activation and registration of a Microsoft product

  http://support.Microsoft.com/kb/326851

  I hope this helps.

• You can connect a SA520W to an RV082?

  I wanted to know if you can connect a cable modem to a SA520W, then connect a RV082 to the SA520W?

  Hi Joseph, you can do this in several ways.

  • Configure the RV082 on a different LAN subnet then have the DHCP service to port WAN RV082 SA520 (not recommended, it is DOUBLE-NAT
  • Configure the RV082 on the same LAN subnet, disable the DHCP server on the RV082 and lan port of SA520 to the lan of the RV082 port (it is a correct implementation, using the RV082 as a switch)
  • Set up a DMZ on the SA520 then connect the RV082 in to the DMZ of the SA520 (depends on if you want outside access to the reserve unit the RV082 firewall)

  -Tom
  Please evaluate the useful messages

• I signed up for CC. I don't know that this Dreamweaver will come into conflict with my older version of CS5. You can run two versions of the DW on a single computer?

  I signed up for CC. I don't know that this Dreamweaver will come into conflict with my older version of CS5. You can run two versions of the DW on a single computer?

  You can run two versions of the DW on a single computer?

  Yes.  Please do not duplicate messages.

  Nancy O.

• How can I move two anchor points overlapping of distinct objects at the same time?

  Please refer to the picture for clarification:

  Pink and blue objects in the image are distinct forms that have the same number of vertices/inkings. The forms have been generated with ArcGIS and exported to a. File to HAVE it. I need to move the anchor points of these two forms, so that they create a trail that follows the outline of the layer of the topography, but it seems that I can only move the anchor of a shape at the same time. Is there a way to pass the two anchors both (anchors that overlap, one of each shape)?

  I should also add and subtract some of the anchor so while making it so each anchor is not a 'corner '.

  I want to essentially merge or merge the anchor points of the two forms while maintaining the two colors, so that they share a border.

  Any help will be a life saver! I can try to clarify if it is not supposed. Thanks in advance!

  -Jake

  Jake,

  You can click on selection of object through only in preferences, then after the first deselect all ClickDrag (click outside paths) with the tool directly on each game Selection and then ClickDrag to move (you can simply go to set).