You cannot change the line profile

Similar Questions

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• You cannot change the administrator account

  Original title: sdasdasdas

  I ca't change on my computer, my OS is windows 7 when I try to change administrator, it asks for a password when I put my password it say "" connection failed: the user did not request type of login on this computer "for this reason I'm stock on my user account and I can not install all the tools" because he has an administrator privileges. pls help me. ?

  Hello

  It seems that you cannot change the administrator.

  Perform the steps mentioned below and see if it helps.

  a: Click Start and type gpedit.msc in the Start Search area and press on Enter.

  b: Navigate to the following location
  Computer configuration / Windows Settings / Security Settings / Local political

  c: Under this click user rights assignment.

  d: Double-click access this computer from the network and verify that EVERYONE is added to the list.

  e: Otherwise add it by clicking Add a user or group , and then type EVERYONE, click OK and then apply and OK.

  Hope this information helps.

• You cannot change the time zone

  I lived in the Central time zone for more than 30 years, but my Windows 7 computer has turned to the Pacific time zone and does not allow me to change the Central time zone?

  OT: Windows 7

  Hi Robert,.

  Thanks for posting your question in the Microsoft Community.

  Of the question above, you are not able to change the time zone.

  What is the accurate and complete error you get when you try to change the time zone?

  Method 1: Setting the clock
  http://Windows.Microsoft.com/en-us/Windows7/set-the-clock

  See also, Synchronizing with a time server Internet, from the link mentioned above.

  Method 2: I suggest you try the steps from the following link:
  
  You cannot change the time and date if the time zone is set in Samoa (UTC + 13:00) and Ko 2657025 is installed in Windows 7 or in Windows Server 2008 R2
  http://support.Microsoft.com/kb/2660075

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• You cannot change the settings of UAC with the guest account

  adadadsadadsada

  You cannot change the UAC settings through the guest account. You must be an administrator to perform the operation.

• You cannot change the format of the cursor

  Original title: mouse cursor

  Cannot change the format of the cursor; message says no file found - for example, C:\WINDOWS\Cursors\arrow\_rl.cur

  _rl.cur is not a slider that comes with XP. Nor is the folder named arrow. You must have installed a 3rd slider party system and I guess you are trying to change that.
  Try to reinstall it.

• You cannot change the ID Icloud

  I was forced to change my Apple ID because I changed my e-mail server.  I never put my ICloud for my Ipad and phone in place on my old ID and now I can not figure out how to change my id Icloud on my Ipad/phone, so I can set it up?  Technical support Apple didn't tell me that I would have no problem with this when I changed my ID but now when I go to the tab in my Iphone Icloud and I paved lists my old Apple ID without any possibility of change anywhere.  There is an Edit tab but which simply allows you to change your name and add a picture if you want, but the old address is grayed out and I can't access it.

  OK, so did you just changed the identifier on your Apple account Apple existing to the new address or haven't set up an Apple account nine for your new ID?

  GB

• Changing the cursor for a helping hand in the text and you cannot change the sentence or paragraphs in boxes to listen audio mode

  In Acrobat Reader if you're going to see menu and scroll all the way to ' Read out Loud ' and activate it, you can listen to the texts.  And you can also take the blinking cursor and click on the sentence or paragraph and a box turns around the sentence or paragraph and reads within the selected text.  But in Acrobat DC the cursor flashing in the text box has changed to a f * k * g hand grabber and you stop to select whatever it is!  How can we change back the hand f * k * grabber g in a cursor blinking so I can choose the text I want to listen or to highlight or mark?  Can someone help me on this?

  Hi dales45194090,

  You can change the options to use Select or hand tool under Edit > Preferences > General

  Also, if you have selected "use keys.. accelerators" option, then you can simply press V as the shortcut key for the selection tool.

  

  Kind regards

  Ana Maria

• You cannot change the configuration of the host

  I have stop my vm which is on san emc readers and he zoned for a second esx server.

  When I scan I can see the disks but I do not see a data store. then I try to add storage, signature of Dungeon and he tells me "cannot change the host configuration.

  (1) what I do 2) I tried vmotion and it did not work

  What is happening in vCenter, correct?  I had this happen in beta.  Connect to your ESXi host and then 'add a storage '.

• You cannot change the administrator rights

  The biggest problem that I have without having administrative access is that I can't uninstall programs, updated ones I use or change my display settings.

  I never did nothing for my computer and am the administrator, this problem just happened on its own. I can not disable UAC because he is not authorized by the Security Center.

  I just want to be able to take control of my computer.

  I tried to make orders on the run screen, but he also tells me that I don't have administrative control to do that.

  I tried to run in safe mode, but it still does not allow me, because this shield bit stupid with four color blocked me to make changes.

  Please help, this user access thing really sucks.

  Hi Lobo_Tech,

  Step 1: You can try to settle the default Administrator account and make sure that the problem occurs.

  1. click on theStart button

  2. on the Start Menu, clickall programs Accessories followed

  3. in the menu accessories,right click on the option from the command line

  4. in the menu that appears, click on the option"Run as Administrator"

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type the commandnet user administrator / Active: Yes and press ENTER.

  7. close the elevated command prompt.

  8. close the session (in the Start Menu) and you will see your new administrator integrated next to your current account.

  9. click the photo icon display built-in Administrator account and connect to it.

  If the problem is resolved, then try to disable the default Administrator of the following account:

  NET user administrator / active: No.

  If the above steps work, then you can try to create a new user account and check if it helps.

  You can view the following link to create the new user account:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  You can run a virus scan and check if it helps:

  http://OneCare.live.com/site/en-us/default.html

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forumand let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• You cannot change the location of the Web site folder

  Greetings,

  When I change the location of the Web sites folder in the server application by changing ' Store Site Files In: ", the files in the default location of continue to load and not those of the location, I've specified. The location, I put is saved in the server application. I can leave the Server app and start again and see the location I specified, but it does not use this place.

  Thank you

  Read https://help.apple.com/serverapp/mac/5.1/#/apd1AB74EDF-C5B3-4C20-AD02-42120FF3B2 08 and try to stick to these principles as much as possible.

  The steps under does not include the method to change the location of the root folder, as Apple has as focus not exactly that.

  Add or change Web pages on your Web site

  To change what is available on the Web site, change the files in the folder to root for the document to your Web site. Folder document root is the folder that contains your website files.

  Use the server application to find the root of your Web site. Default document root is/Library/Server/Web/Data/Sites/Default /. In addition, when you create a site and let the application Server automatically creates a new folder for you, he places the site filesin/library/server/Web/Sites/data/domain_name/.

  1. Selection of sites in the sidebar the Server app.
  2. Select the Web site, and then click the button change .
  3. Click the arrow to the left of the menu pops - up Store Site files in. The Finder opens at the location the document root. Edit files in this folder to change what is available on the Web site.

  They wanted to provide a foolproof server where effective MDM can be performed. Therefore, they went very far to ensure that it should not be messed with. The integrity of services that ensures the effective management of Apple devices are paramount.

  Therefore, I think that you try unfairly to move the part of the services and server would not allow you to do so, as the Profile Manager and Wiki should still work after you have set up to host your Web sites (which Apple documentation referred to as virtual hosts).

  Thus, you need to configure the "Virtual Hosts" with their root of the document.

  HTH

  Leo

  Edit: If you had read: /Library/Server/Web/Config/apache2/ReadMe.txt

  and scroll down to sites you'd understand more.

• You cannot change the permissions of the user

  Hi guys,.

  I have a MacBook Air, which started with the 10.11.4 2014 loading screen and would be turned off once the progress bar moves to halfway.

  I ran MRI what diagnosis came thin and storage said it was a software error.

  I removed the SSD drive and placed in a basket so I can see the SSD on my iMac. He goes (to the Mac OS Extended format) and I can see the folder of the user, but under "Sharing and permissions", she says that I can read only. In most cases I would be directly click on the padlock on the bottom right, change the privileges and choose "apply to included items", but it is all grayed out.

  I ran and fixed the permissions through terminal (since I can do is no longer on the disk utility). No idea how to get around this problem? There are files on the SSD drive which unfortunately were not backed up.

  Note: I also tried to run BatChmod but it has not fixed either.

  Any ideas?

  Your help would be much appreciated.

  Thank you.

  Repairing permissions has no effect on your Home folder.

  Reset permissions on your folder. Boot from your recovery partition now command-keys R in the menu utilities launch Terminal. In the Terminal, type: resetpassword , then press return.  (Note: you won't be reset password)

  Click the icon for the hard drive of your Mac at the top. In the drop down menu below, select your home folder. At the bottom of the window restore Home Directory Permissions and ACLs. Then, click on the Reset button. When the prompt returns to the command line, you can leave out Terminal.

• You cannot change the settings of my Toshiba Power Management

  Cannot change settings in my power toshiba management section... can someone help me?

  Hi Matt

  I want to help you, but first of all, it would be very interesting to know the name of your unit.
  However if you have any problems with power management on your device, I suggest to download the new version of the Web from Toshiba site and reinstall the Power Saver utility.

  Good bye

• C:\Users\Taufiq\AppData\Local\Temp could not be saved, because you cannot change the contents of this folder.

  When downloading, I had met following problem please solve this problem.

  HI Maria,

  I would be grateful if you could answer the following questions to guide you in the right direction:

  1. what program or application you are trying to download?

  2 is the issue limited to specific application?

  3 have there been recent changes made on the computer before the show?

  You can run the next fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  See the suggestions provided by Karena R 12 March 2011 and check.

  http://answers.microsoft.com/en-us/windows/forum/windows_vista-performance/cwindowstemp-could-not-be-saved-because-you-cannot/2814213c-204c-e011-8dfc-68b599b31bf5?msgId=dd7abbc2-2b4c-424b-9110-8008b02ae3d8

  Please post back with the results and we will be happy to help you further.

• You cannot change the output type and format in the page requests system - PeopleSoft process

  Hi all

  When I navigate to the PeopleSoft process scheduler page and try to run a process I see the output type and format web and txt only. I am unable to change the output type and format. All formats and types of output are marked as active in the system settings page. I'm super user of the system as well. I have as well the role of Admin ProcessScheduler. I would like to know if someone has already faced similar problems.

  Thank you

  Vimal

  

  Run the following SQL query to your OPRID:

  SELECT A.CLASSID, PSPRCSPRFL A.OVRDOUTDEST, PSOPRDEFN B WHERE B.PRCSPRFLCLS = A.CLASSID AND B.OPRID = '';

  Make sure that OVRDOUTDEST = 1.

  If it's 0 then you have to fix your configuration profile of the process as follows:

  -Main menu > PeopleTools > Security > list permission > CLASSID research (white list) back to top query

  -Go to the process tab

  

  -Click on "process the profile permissions

  

  S ' ensure that 'substitute an output Destination' is checked. Click OK, and then save.

  

  This should solve your problem.