You must be able to export the metadata xml file.

Similar Questions

• Export the sequence XML file browse for use in another project

  When I generate a browse sequence based on the table of contents by using zero for the level of the pound, rather than get A, A1, A2, B, B1, B2, I receive A, B, A1, A2, B1, B2.  The table of contents first crosses all elements of level 1, cycles backwards through all the level 2 element, then 3rd level, etc.

  My solution was to automatically create the sequence to browse at level 0 and then manipulate manually to the output depending on how my readers would actually read my book online (IE A Aa A1 A1a A1b A2 A2a A2b B B1 etc etc).

  Now that I have my sequence in the correct order for this project, I don't want to repeat these steps each time I create a new version of my HLO for the guide even after that a few minor updates have been made to the source of the FM.

  There is a file named whbrs.xml in the output folder and contains the sequence order of travel that I specified in my no workaround.

  Is it possible to export this file to another location for use in another project that references the same guide?

  This methodology is much preferred, as I work at a level of the company with several documents (some numbering in the hundreds of pages) and do not want to have to manually use my solution for each project that I update in the next few years.

  Hi Kristopher

  You probably don't want to use that particular file, because it is an output file. You'd probably have better luck using the file ProjectName.BRS as this one must be a source file.

  However, keep in mind that if (or how) it will work completely will depend on having the recipient project using the same identical structure and identical file names.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Unable to find the Metadata XML file.

  I am trying to apply the patch Bundle. In this process, I'm trying to download the patch 13550561 in EM.
  His watch a column to download the file "XML Metadata.
  
  Please let me know what file must download in "XML Metadata file". I couldn't find anything in the zip patch with this name.
  
  Thank you
  support_dba

  Hi s/n,.

  Yes, the procedure for the Agent BP1 patch. Once the Agent of SGD & have been applied with BP1, you can proceed to the 12.1.0.2 update of the plugin.

  Vincent.

• You must stop your request before the engine may stop

  I have an integrated application that uses LV DSC 6.0.2. The application starts and stops the engine tag programmatically. The application works fine, but on some machines, I'll get continuously the next dialog box when I try to stop the engine of the tag:

  "You must stop your request before the engine may stop"

  It's strange, because it only happens on some machines (it seems that it can occur on computers with ONLY of DSC Run-Time installed, not the full dev system. DSC LV).

  The dialog seems to refer to the application of 'control' which tries to stop the engine... it isn't telling me that my devices servers need to be stopped.

  This dialog box does not seem logical, I should be able
  to build an application that can start and stop the engine... and why I get this dialog on some machines but not on others?

  John Paul,

  There are two points that we should ask ourselves:
  1: you can have different loops while in your application where you read/write to and from the engine of the tag with the read/write Tag.vi. These screws has a stop of production which must be wired first the while loop. If you have cases where you do not connect this output to your time stop loop you could access the engine while you want to stop the engine in another loop with the Shutdown.vi engine. -> Make sure you have all drivers of DSC to access loops has stopped before you turn off the engine.

  2nd: I guess he was once an issue of race with the DSC engine condition and how it access to shared memory with the read/write Tag.vi. But this condtion of race must be agreed with the version of LabVIEW DSC
  6.1 or with other fixes for LabVIEW DSC 6.0.2. You can download patches (in this case, particularly the BVRTDatabase.dll) driver update page & of NOR: www.ni.com/support/ > Option 3, drivers and updates > Search drivers and updates > type 'LabVIEW DSC' > choose LabVIEW Datalogging and Supervisory Control 6.0.2 fixes.
  You must apply the patches of this as well on your DSC 6.0.2 Run Time System!

  I hope that one of the help of two suggestions to solve your problem.

  Concerning
  Roland

  FTP://FTP.NI.com/support/LabVIEW/labviewdsc/fixes/6.0.2/

• I have Adobe CS5.1 and must be able to open the Nikon NEF RAW files from my Nikon D4s... y at - there a downoad Adober website for this or how can I get the update to do?

  I have Adobe CS5.1 and must be able to open the Nikon NEF RAW files from my Nikon D4s... y at - there a downoad on the Adobe site for it or how can I get the update to do?

  Hi XDCAMAN,

  Photoshop requires at least version 8.4 of camera raw to be able to directly open these Nikon NEF D4S files which is available in Photoshop CS6 and above versions (not in CS5)

  Reference article: supported by Adobe Camera Raw devices

  You can upgrade to a higher version of Photoshop or download Adobe DNG converter to convert raw files to DNG and access these DNG files in Photoshop CS5.

  Kind regards

  Claes

• Why you're not able to get the new June 20th, 2016 updates on your creative cloud, if you are running Windows 7.

  Why you're not able to get the new June 20th, 2016 updates on your creative cloud, if you are running Windows 7.
  
  So I spent all day on this because Adobe did not anywhere that I could find it. But I'm hoping some of you to save a lot of time wasted... you can't upgrade to the latest version of the application if you have not all updates to Windows 7.

  
  

  If you're like me and do not want anything to do with the Windows updates... you may encounter the same problem. Summer/don't I am not at all interested in Windows 10 (who they are sneaking into regular updates) so I don't usually have enabled updates. If you don't... you cannot upgrade your program to the latest version. Creative cloud not even give the option.

  
  

  I think it's the Microsoft Visual C++ or something like that who needs update to run the latest version of the software... If you do not have it on your system, you do not install the new updates properly, but be careful not to download sneaky windows 10 "update." Know how it's called blindly here before update you.

  I hope that helps some of you save a whole day unnecessarily.

  Some programs on a win os to visual c ++ 2015, Download Visual C++ Redistributable for Visual Studio 2015 of official Microsoft Download Center

• I'm not able to export the photos of LR 5, the taskbar in the upper left is longer to accomplish the task?

  I'm not able to export the photos of LR 5, the task bar at the top left is no longer to accomplish the task?

  My export box started working again on its own, I have no idea what the problem was but glad it worked once more.

• How do you use the config.xml file to determine which version of an application, a user will download?

  I have two APKs for the same application and I implemented the config.XML of lower version number working for all screen sizes.  The config.XML for the higher version number is set up for only the scresns large and extra-large.  Here's the code from the config.xml file.

  Version 1

  	< media screens android: anyDensity = "true" android: Center = 'true '.
  	Android: smallScreens = "true".
  	Android: normalScreens = 'true '.
  	Android: largeScreens = "true".
  	Android: xlargeScreens = "true" / >

  Version 2

  	< media screens android: anyDensity = "true" android: Center = 'true '.
  	Android: smallScreens = "false".
  	Android: normalScreens = "false".
  	Android: largeScreens = "true".
  	Android: xlargeScreens = "true" / >

  When I try to download the app on Google game, only the top version is available, regardless of the size of the unit.  When I asked Google game why this was not behave as expected, they said that the file manifest for both applications is the same.  Here is the code, they shot in the manifest after having used PhoneGap Build.

  < media screens android: anyDensity = "true" android: smallScreens = "true" android: normalScreens = "true" android: largeScreens = "true" android: Center = "true" android: xlargeScreens = "true" / >

  Can someone explain why PhoneGap Build is not using the settings I set in the config.xml file?  And how to fix this?

  The tag is not a valid tag in the config.xml file. This is probably why you see the same tag in two, as the build service is ignorant.

  As to how solve you this problem. Currently, you can not, but the next version of android-cordova will include the ability to add a tag which you will be able to use like this:

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• Export the list of files

  I'm trying to change the script of LucD here: http://www.lucd.info/2010/10/21/get-the-folderpath/ to also list the virtual machines in the folder but it's all virtual machines instead of what is right in the folder list. What Miss me?

  Function Get-FolderPath {}

  (param

  [parameter (valuefrompipeline = $true,

  position = 0,

  HelpMessage = "enter a folder")]

  [VMware.VimAutomation.ViCore.Impl.V1.Inventory.FolderImpl []] $Folder.

  [switch] $ShowHidden = $false

  )

  Begin {}

  $excludedNames = 'Center', 'virtual machine', 'homepage '.

  }

  {in process

  $Folder | %{

  $fld = $_. ExtensionData

  $fldType = "yellow".

  if($FLD.) ChildType-contains 'VirtualMachine') {}

  $fldType = 'blue '.

  $fldVMs is get-VM-location $fld. Name | Select name

  }

  $path = $fld. Name

  While ($ FLD.) Parent) {}

  $fld is get-view $fld. Parent

  If ((! $ShowHidden - and $excludedNames - notcontains $fld.)) (The name) - or $ShowHidden) {}

  $path = $fld. Name + "\" + $path

  }

  }

  $row = "" | Select name, Type, path, VMs

  $row. Name = $_. Name

  $row. Path = $path

  $row. Type = $fldType

  $row. VM = [String] $fldVMs

  $row

  }

  }

  }

  SE connect-ViServer $myvcenter

  Get-file | Get-FolderPath | Format-Table - AutoSize

  Hello, rbglhec-

  You should be able to limit the scope of the appeal of Get - VM by adding the parameter - NoRecursion.  This will have to Get - VM get only the virtual machines directly in the given folder.  And, it might be a good idea to use the actual files as the value for the - Location parameter, instead of the folder name (in order to have a unique piece for the location, in the case where there are all folders of the same name in your inventory - say, the default folder 'vm' in each data center).

  So, the line that gets the virtual machines in the given file would look like:

  ...$fldVMs = Get-VM -Location $_ -NoRecursion | select Name...
  

  How does do for you?

• Can I export the data (XML) using Acrobat Standard DC?

  I am currently using Adobe Acrobat XI which is allow me to export XML data from tools > forms > form additional Options > export data. I know this feature is also available in Acrobat Standard DC?

  Hi jack65464326,

  Yes, you can export the data (XML) using Acrobat Standard DC, refer to this KB document for help Acrobat help. Collection and management of the PDF to form data.

  Kind regards

  Nicos

• I created a new library of more new playlists but cannot find the Library.xml file

  Hello

  I'm going to re - build my iTunes files from scratch, a kind of decennial event 'spring clean '. I have created a new library by using the command, click on application startup, and then began to rebuild new reading lists in the application. I can see the folder newly created the library that contains the new "iTunes Library.itl" file BUT I don't see that the iTunes Music Library.xml file. " There certainly must be one to save the data of the playlist, and probably "Get Info" should reflect today date' today... I don't see older versions.

  Although everything seems to work perfectly I don't want to have to re - visit the construction of Playlists from scratch for the next ten years! Can anyone suggest what happened to the .xml file?

  Thanks and greetings

  You can create an .xml on iTunes/file/library/Export library file and gives you the opportunity to put the Library.xml file in your iTunes Media folder - or anywhere you like.

  If you need to rebuild your playlists, you can go to iTunes, file, library, import playlist and select the .xml file.

  Normally, you do not see the .xml file in your iTunes folder.

• Invalid application - cannot find the config.xml file archive

  I'm new to webworks development... I created a sample config.xml and index.html in the folder Helloworld and made a Zip file...

  Then using ripple I packed up the app and the. Cod files are generated correctly...

  But I was not able to pack and sign using ripple, if I had the signature keys added to the bin folder of the SDK correctly...

  So I tried bbwp command line argument to achieve the same... But it has ended up with the error "Invalid application archive - cannot find the file config.xml.

  What is the problem that I do with the archieve file?

  How to use eclipse for development for the Webworks 2.3.1.5 sdk?

  My guess is that you have a HelloWorld inside your zip file and the file config.xml and index.html are inside this folder. The config.xml file must be in the root and must reference the index.html file, wherever it is in the zip directory structure.

• import the request xml file and the xml for mds dataset

  Hello world
  
  I exported xml default request to the metadata file.
  Then I have the ModifyResourceDataSet.xml and I change the ModifyResourceRequest.xml file to use the dataset file.
  
  I then edit weblogic.properties.
  metadata_from_loc = / u02/app/oracle/product/fmw/IOM/server/bin/oracle/metadata/iam-features-requestactions/model-data
  metadata_files=/U02/app/Oracle/product/FMW/OIM/Server/bin/Oracle/metadata/IAM-features-requestactions/model-data/ModifyResourceRequest.XML
  I executed weblogic.properties
  Can I edit weblogic.properties file again.
  metadata_from_loc = / u02/app/oracle/product/fmw/IOM/server/bin/oracle/metadata/iam-features-requestactions/model-data
  metadata_files=/U02/app/Oracle/product/FMW/OIM/Server/bin/Oracle/metadata/IAM-features-requestactions/model-data/ModifyResourceDataSet.XML
  
  But, when I try to create change the provided resource, screen related dateset moved not.
  When the error?
  Or where I'm bored?
  
  Thank you.

  Hüseyin Carole,
  What message errorr you found? Check the doc for the weblogicImportMetadata command.
  http://docs.Oracle.com/CD/E21764_01/doc.1111/e14309/utils.htm#OMDEV759
  Besides that this request for OIMMetadata should be up.
  -Kuldeep

• "The document is not valid. The index.xml file is missing.

  I suddenly can't open one of my docs of numbers. I get a msg "'name of the doc' document is not valid. The index.xml file is missing.  I literally had the open document this morning without problem, closed, tried to reopen and now I get this msg... all in the same session of the computer. It began not after an update or anything like that, right in the middle of a session of the computer.  You seem to affect all the docs of numbers.  I can't open an any of them now.  I am running OS X El Capitan Version 10.11 and numbers 09, Version 2.1.

  Hi jg,.

  The case usual this message, it is that the document has been opened in numbers version 3.xx, which converts it into a new file version that uses the file index.xml internal requested by Numbers ' 09.

  You have 3 numbers installed on your machine? This file has already been opened in this application?

  The file was saved to iCloud or opened by the iOS version numbers or numbers for iCloud?

  Recommended 'cure' is to open the file using the 3 numbers, then save as... or export to format Numbers ' 09. As a result, remember numbers to quit smoking (v3) - menu numbers > numbers to quit smoking; by clicking on the red light closed the file, but doesn't end numbers. So avoid open numbers files by double-clicking on the file itself.

  Instead, start Numbers ' 09 (v2.3) and open the file in the application.

  Kind regards

  Barry