You must reinstall CS6 due to hard drive corruption. Should provide us the eligibility of students once again, as has been done 3 years ago.

Eligible student is required again when you reinstall CS6 due to Corruption of the OS?

You need to do is enter the serial number you gave, when installing

Tags: Adobe

Similar Questions

  • What is the next step after the replacement of a hard drive corrupted/dead, I replaced the original HD.

    After realizing that my original on the G56 - 118 CA hard drive died, I bought a new 'Seagate' Momentus 320 G SATA 16 MB 7200 RPM drive.  However, after swapping, install the new disk and using the recovery disk, I create the purchase of the computer... still does not work.  What is my next step... Please help, I'm out of ideas, I copied the drivers on the HP site, but it does not help.  Anyone think of buying a HP recovery disk will do something?

    Hello

    If you are in the United States, click on the link below.

    http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1

    If you are in another part of the world, link below.

    http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

    Let us know how it goes!

    * Although I am an employee of HP, I speak for myself and not for HP.

    Click the White Star Kudos to say thank you *.

    Please check accept as Solution if it solves your problem *.

    Concerning

    Maton

  • Can you put a 500 g SATA hard drive in Pavilion a750w?

    Can you put a 500 g SATA hard drive in Pavilion a750w?  The bios is version v3.26, and the operating system is XP with SP3.  40 gig HD is full and you are looking to replace it but do not know what the size limit is with this bios version.

    Here are the specifications of your HP Pavilion a705w desktop. This is based on the assumption that you converted the 5 and 0 and the fact that you mentioned a 40 GB hard drive.

    You already have the most current version of the BIOS of your computer and running the most recent service pack of Windows XP. Your computer and the operating system should support a drive of 500 GB without problem. The only problem is that your computer isn't any SATA ports, only 66/100 IDE (PATA). Look at local retailers and online for the IDE drives.

  • I can read only half of my product key due to wear, but I need to reinstall xp on my hard drive again. How can I get the key?

    I can read only half of my product key due to wear, but I need to reinstall xp on my hard drive again. How can I get the key?

    If you can still boot your old disk, you can use a program such as one of them:

    KeyFinder: <> http://www.magicaljellybean.com/ >
    Belarc Advisor: <> http://www.belarc.com/free_download.html >

    to read the key out of your old system.

    Also note that if you have a system OEM and the OEM installation disks, the key can be incorporated in the installation discs and can not be necessary when your reinstalling Windows.

    HTH,
    JW

  • How can I reinstall audition CS6 upgrade after hard drive crash?  Qualifying previous product is not on my computer.

    How can I reinstall audition CS6 upgrade after hard drive crash?  Qualifying previous product is not on my computer.

    Never mind.  I found the license key for the previous product and was able to complete the installation.  Being a "pack rat" has its merits, sometimes.

  • I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

    I need to reinstall Adobe Acrobat 11.0 I bought in 2014. I lost my hard drive and need to install the new hard drive.  No idea what I'm doing!  Thank you!

    http://trials2.adobe.com/AdobeProducts/Acro/11/Win32/AcrobatStd_11_Web_WWMUI.exe

    This is the file I download - but when I go to the Setup process, I bought for the installation program Adobe Acrocat Pro XI (11.0.07).  When I insert my serial number, he wanders as invalid.  I am running Win 7 Pro.  It worked fine on my old hard drive.   I think I maybe win64.  Does it matter?

  • How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

    Original title: the file format of external hard drive is the RAW and not NTFS. How can I get Windows 7 to read RAW hard drives without having to format the hard drive due to important work on this subject?

    I put the hard drive on an XP and Vista machine and can read the hard drive, but not with Windows 7

    Hi Zling,

    It works on other OS? When did you finally read the disc and with what OS? If you can read the drive and make a backup of the data on this subject, I you suggest to backup the data on the drive and then put it in using the NTFS file system.

    I hope this helps! Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Computer is not accessible due to a hard drive damage, how to disable the CS5 license?

    Computer is not accessible due to a hard drive damage, how to disable the CS5 license?

    When you click on "Contact us" on this page: Activation & deactivation help

    You will see the chat option listed.

  • You can put a Dimension 3000 hard drive in an Optiplex GX240? [PLEASE ANSWER!]

    My dimension 3000 has the blue screen of death. [stop: 0x0000007E] and let me know if you can put a dimension 3000 hard drive in an optiplex GX240

    GX240 has LESS RAM than a dimension 3000.  You cannot run in a GX240 without reinstalling total.

    STOP: 0X0000007E (0XC0000005, 0X804E518E, 0XFC938104, 0XFC937E04)
    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

    A device driver problem or malware

    • If this issue occurs after the first restart during Windows Setup, or after installation is complete, the computer may not not have enough ram to run Windows XP.
    • The BIOS of the computer may be incompatible with Windows XP, or it might have to be updated.
    • The video card drivers may be incompatible with Windows XP.
    • A system service or a device driver may be damaged.
    • If the problem is associated with the Win32k.sys file, it could be caused by a third-party remote control trojan malware program.

  • When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

    When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

    Hello

    Discs formatted with the FAT be limited to files with a maximum of 4 GB. You can format outside
    drive drive with NTFS, contact the manufacturer if necessary pilot or split the file into parts under
    at 4 GB.

    Overview of FAT, HPFS, and NTFS file systems
    http://support.Microsoft.com/kb/100108

    How to go beyond the limit of 4 GB on FAT32
    http://lazybit.com/index.php/2007/03/01/how_to_get_over_the_4gb_limit_fat32

    -------------------------------------------------------------------------------------------------------------------------

    The ZIP file and then divided the ZIP which helps maintain the integrity of sharing files and restoring.

    Zip and Split - free
    http://zipandsplit.toolazy.me.UK/

    Split and Zip - free
    http://www.jtoolgame.com/tools/splitzip.html

    Akhir Split Zip - free
    http://www.mydigitallife.info/2009/04/24/Akhir-split-zip-splits-files-into-smaller-zip-files/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • E-Machine with XP when you don't use shutsdown. Hard drive stops but starts when the mouse moves. But XP does not start. Need to unplug and then plug in and start the PC.

    ' ' I get the error message 'A' recovered from a serious error report = ' BCCode ea BCPI 8507b6e8 BCP2 869 B 7800 BCP3: 869 B 8378.  Included files: "owner\locals\locals ~ 1\temp\wer9274." DIR00\MINI 121909-02mp "Hope someone understands. I keep the hard drive running to collect the info from my weather station.

    Go into Control Panel, then Power Options.

    On the power management tab, what is your power mode? Below which correspond to the parameters for this method of power - to turn off the monitor, hard drives & go standby time of the system.

    If you want to keep the hard drive, scroll down the drop-down lists & select "Never" turn off hard drives and the day before.

    Go to the Hibernate tab, and then remove the tick in the enable hibernation check box.

  • I want to Exchange my hard drive of my iMac for one SSD. Existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

    Oh, I of course put the whole issue in the reference line.

    I'll repeat it here.

    I want to Exchange my hard drive of my iMac for one SSD. The existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

    Thanks, Thomas

    Transfer facilities of Adobe does not normally operate.  You must reinstall using installation files.  At a minimum you must disable, but you may find that you need to uninstall and reinstall.

  • HARD drive is not recognized on the Satellite 2800 200

    Hello

    First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

    I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
    When it is started is says "insert the disk in the drive system. Press a key when readya?.

    My bios is ACPI BIOS version 1.80
    In Pheripheral in Bios it says disc hard = not used Mode.

    On page two discs i/o: HARD drive: no drive.

    I tried two hard drives and the two were not working and not recognized in the BIOS.
    I have no CD of restoration.

    My questions:

    What kind of central computer has this laptop?
    Can someone help me with the recovery CD?
    What can I do to fix this?
    How can I change my BIOS so that the HARD drive is recognized?

    My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
    But also with the disk hard 10 GB of origin, I had the same problem.

    I hope you can help me and once again I apologize for my English.

    Hello

    I'll try to help you my friend.

    > When it is started is says "insert the disk in the drive system. Press any key when ready
    This message appeared on my laptop after the HARD disk is dead.
    I had to replace the HARD drive and reinstall the operating system.

    I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

    I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

    Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
    > How can I change my BIOS so that the HARD drive is recognized?
    The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
    But vary important is that you use a compatible HARD drive.

    > Can someone help me with the recovery CD?
    Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
    What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

    Greetings

  • If I bought a new internal hard drive, can I transfer windows hard drive fom that came from the computer to the new, or do I have to buy another software package full of windows?

    What should I do to get windows vista on the new hard drive on the old, because I would like to upgrade to windows 7 since vista when I transferred transversely to the new.

    Your license of Vista will be OK to reinstall it on a hard drive replacement on the same computer.

    Hard disk manufacturers provide normally cloning software to do what you want to do.

    Look at your new Hard Drive manufacturer's Web site.

    Or there are 3rd Party software (cost the same money if): http://www.acronis.com.au/homecomputing/products/trueimage/

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    See you soon.

    Mick Murphy - Microsoft partner

  • How to install Win7 on new hard drive and still access all the files from the hard drives of previous Vista?

    I currently have a Windows Vista PC. It has two SATA drives, one with the operating system, the one I use for storage.

    I want to buy a new SATA hard drive and install a new copy of Windows 7 top.

    I want to know the steps to follow to do this. My plan is this:

    1. turn the pc power off and open the case.

    2. remove the old hard disks

    3. plug the new empty hard drive

    4. turn on the pc and the insertion of the disc to install to Win7 for DVD-ROM drive

    5. enter in the bios and put the DVD-ROM as first boot device

    6. install win 7 on new hard drive.

    Is this correct?

    Because my next question is important:

    7. Turning off the computer.

    8 reconnect the two old hard drives. New total number of SATA drives connected = three.

    Now when I restart the PC and login to Win 7, it lists two other drives as, for example, D:\ and E:\ readers?

    How can I make this work?

    Thank you very much!

    Thanks for your reply, but I don't want to dual boot. I just want to have the hard drive as the master drive Windows7 and the old two drives as slaves, where I can access files as the pictures and letters.

    Any help would be appreciated!

    Well, I would disconnect all drives hard current interns, then connect the new hard drive, reinstall Windows 7, re - attach the old readers as slaves and copy all the data you need to on the disc of Windows 7.

    See:

    How connect a SATA Hard Disk as a slave . eHow.com
    Single, master and slave drives and Jumpering

Maybe you are looking for