You want to generate a report to see the availability/uptime? Suggestions?

Similar Questions

• You try to run a report to view the comments of the CPU usage in vFoglight 6.0

  I am trying to run a report to view the comments of the CPU in vFoglight 6.0 usage, as I have a couple of VMs that seem to cause problems. I want to see what that levels of CPU for a while inside the virtual machines, but I only seem to be able to find the data in the reports for the use of the host processor.
  Any help is welcome

  If you want to use canned reports, which I think will work for what you ask, there is a pre-built for you.
  Home > reports > report > select the right model under all report templates ("using the virtual machine CPU and time ready" looks like the report that you want to")
  for the service should work the vCenter. This will send you all the hosts and any use of the VMs UC over what period you set (default is 4).

• Just create a boot SSD drive. You want to minumize what Mozilla wrote in the SSD. You want to change Max and log locations not SSD drive. Anyone know how?

  Just create a boot SSD drive. You want to minumize what Mozilla wrote in the SSD. You want to change Max and log locations not SSD drive. Someone knows how, I could not find where it change?

  See http://kb.mozillazine.org/browser.cache.disk.parent_directory

  You can also install portable Firefox version, if you want to run Firefox on a disc of SS.

  • http://PortableApps.com/apps/Internet/firefox_portable

• When you try to connect to a wireless network I get this error: "If you want Windows to configure this connection, start the Wireless Zero Configuration service.

  original title: WiFi

  I want to connect to a wireless network on my laptop. When I go to the page of networks wirelss under the "choose a wireless network" it says "Windows cannot configure this wireless connection. If you want Windows to configure this connection, start the automatic Wireless Configuration service. My other laptop does not, and I don't know how to make the wireless network options appear. Any help is appreciated!

  Hi AshleyHenley,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  See the article and run the Fixit tool available, check if it helps.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• Hello everyone. I have a DVR installed at home and I want to connect to work to see the camera.

  Hello everyone. I have a DVR installed at home and I want to connect to work to see the camera. If I connect to my home network, Firefox will load the page but not the images because I'm missing a plugin. If I install explore this work because I have to install Hiactivex.cab. Y at - it a plugin to watch images from the camera DVR on Firefox?

  The place to inquire a plugin for Firefox is the manufacturer of this recorder.

• Have disabled Lightroom on one computer, I always get a message on the new computer, saying that the serial number is still in use on the old computer. I'm on a Mac and you want to use LR6 on a new iMac.  Any suggestions?

  Question: I have disabled Lightroom on a single computer, but always get a message on the new computer, saying that the serial number is still in use on the old computer. I'm on a Mac and you want to use LR6 on a new iMac.  Any suggestions?

  Thank you very much. Problem now solved and happiness is back.

• Is Acrobat Pro just for us. We have an employee handbook that needs editing. A part is current pdf, some of an earlier version. You want to get all in a manual, the table of contents automatically adjust and links to specific pages of the table of content

  Is Acrobat Pro just for us. We have an employee handbook that needs editing. A part is current pdf, some of an earlier version. You want to get all in a manual, the table of contents automatically adjust and links to specific pages of the table of contents.

  Acrobat Pro is certainly not the right tool for editing. You want to change the manual using the source - MS Word files for example. Once you have the full changes including OCD work as you want, Acrobat Pro is the tool to convert the source document to PDF format, and ensure the accessibility requirements of 508 - and preferably ISO 14289 (PDF/UA) - are met.

• Can't see the available wireless networks

  I bought a new router (netgear300) and tried to connect to it. For some reason any would connect to my computer, but it has not been through the modem, so I uninstalled the network card and reinstalled and rebooted the computer. Now, I do not see the wireless networks available and cannot connect to anything. I tried to download the readers online, connect to the network manually, but nothing seems to work. I get 3 error messages when I try. They are; 1 reset your wireless, 2 network adapter. the NIC "atheros ar5007 802. 11 b / g wifi adapter "known issues of pilot or related equipment, 3. Make sure that the internet protocol bindings are correct. I did all the and still nothing seems to work, and I still don't see the available wireless networks. Nothing has had this problem before? My laptop is a compaq presario f700 model. I am currently using windows vista Home premium and have the cd of windows 7 Professional, but I don't know if the upgrade with this question will repair or remain the same. Someone knows how to fix this?

  Hi Mattcreatr,

  1 can connect to the router with other machines?

  Step 1:

  Make sure you have the latest NETWORK adapter drivers installed.

  Also, see if there is a software that goes along with the drivers.  If so, get the latest version of this as well.

  Update drivers: recommended links

  Step 2;

  Also, see if there is a software that goes along with the drivers.  If so, download the recent plus version and that as well.

  Also, make sure that the wireless adapter is turned on.

  a. Click Start, type network and sharing in the search box Center start and press ENTER.

  b. click on change adapter settings.

  c. right click on the connection, and then select activate.

  Step 3:

  Alternatively, you can perform a restore of the system to a restore point where you do not experience the problem and check.

  Start your computer in safe mode

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• When I run mozilla or open a link in a new window but I get the page you want to load an additional page of the new tab opens with it, the difficulty?

  When I launch mozilla or open a link in a new window I get the page you want to load but an additional page of the new tab opens with her. I tried to change my homepage to different things (new tab, firefox home, see the blank page) but I always get a new additional tab to open. How can I get only one page to open it?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information.

  Now, should open a new tab containing your troubleshooting information.

  1. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  2. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  3. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• You want to contact Microsoft support team own the support the computer engineer.

  Original title: * address email is removed from the privacy *.

  I would like to have a phone number. Tobeable take someone on how my conputer is oprating etc. THANKS, RAY

  Hi Philippe,.

  Thanks for posting your query in Microsoft Community.

  I understand you want to contact Microsoft support team for technical support technician check your comptuer. If I'm wrong please let me know.

  You can contact Microsoft technical using these numbers:

  http://support.Microsoft.com/kb/319726

  If you want the help of the Microsoft Community, answer these questions.

  1. what exactly is the problem you are having?

  2. you receive error messages?

  3. What is the brand and model of the computer?

  You can view the following link to ask a question on the help forums.

  http://support.Microsoft.com/kb/555375

• Error Message, "are you sure you want to cancel importing?" when importing the photos.

  For about a week, every time I connect my Windows phone (Nokia Lumia 925) import of images starts as before.

  Recently, after having identified the new photos and apparently their import, a window asking you, ' are you sure you want to cancel importing? There is no easy solution I found to close this window. I have to open the Task Manager and the "end task".

  Can someone tell me what to do to fix this?

  Thank you

  Ron T

  Hi Ron,

  Thank you for your response.

  As I asked some details in my last post, I would need to know,

  1. Remember to make changes to your computer recently?
  2. No matter what software you use to import the photos?

  In the meantime, you can try the following suggestion.

  • If you have another windows phone, please try to connect to your computer and check if you have the same message, if so, under the.
  • Alternatively, you can try to update firmware of phone Nokia about the Nokia site and check if it helps.

  You can check the link below for updates.

  http://www.Nokia.com/us-en/support/product/lumia925/softwareupdate/

  Hope that this information helps, otherwise reply with the above information so that we could help you more.

• How do you want to give other users access to the Mode to develop Admin?

  Hi - I can see the tab 'develop' when I connect to the my sites, but other users Admin can not. Does anyone know how to change this?

  Thank you!

  Sorry guys... but I forgot to ask.  Are these users non-partner? The "develop" button is visible for users of partner.  There is no work around at this point.  If indeed a partner user and the button does not appear, then it would be a problem.

  -Sidney

• See the available 4 training?

  Hi, I have to do this wrong - I don't see that View 4 classes listed for Europe - nothing in North America yet?

  http://myLearn.VMware.com/portals/www/search/results.cfm?UI=www & pid = www & menu = Search-Results & Searchtypes = simple & OrderBy = relevance & Keyword = View v4& category = hourly

  Where are training classes listed we View 4?

  Thank you

  VCP

  All reviews install, configure, manage classes have been overthrown from V3 to V4 for Online and some in the class of those who have been added. The Design has not been operated, but that's fine since the concepts and methodology is the same whether it's v3 or v4.

  You want to make a difference in the future of VMware products? Feature to ask your ideas ( http://www.vmware.com/support/policies/feature.html )!

• Hi, we are a provider of disability. We have SBS 2011. Access 35 server now. You want to 125 so they can get the email and sharepoint.see below:

  Hi, we are a provider of disability. We have SBS 2011. Currently we have about 35 access to the server. - 9 direct to the server and remotely via web browser rest (we understand it goes to 75 licenses?) We want to add our support staff total 125 to pass the email and sharepoint. Only 35 max could be connected at all times. We have about 35 PC that would have access to the main server of 10 sites. do we need to move away from SBS 2011?... Thanks Jack

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• SCCM deployed to all laptops XP and you want to make a request to see if anything was missed.

  original title: SCCM querys

  Hello

  I sent some Sophos encryption software to all laptops XP we have on our network via SCCM. Now, I would like to make a request to see if laptops have slipped through the net.

  Is it possible to query all the XP laptops that do not have the software on?

  Thank you

  Dene

  Hello denzil69,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forum:

   

  http://social.technet.Microsoft.com/forums/en-us/categories/