See the available 4 training?

Similar Questions

• Can't see the available wireless networks

  I bought a new router (netgear300) and tried to connect to it. For some reason any would connect to my computer, but it has not been through the modem, so I uninstalled the network card and reinstalled and rebooted the computer. Now, I do not see the wireless networks available and cannot connect to anything. I tried to download the readers online, connect to the network manually, but nothing seems to work. I get 3 error messages when I try. They are; 1 reset your wireless, 2 network adapter. the NIC "atheros ar5007 802. 11 b / g wifi adapter "known issues of pilot or related equipment, 3. Make sure that the internet protocol bindings are correct. I did all the and still nothing seems to work, and I still don't see the available wireless networks. Nothing has had this problem before? My laptop is a compaq presario f700 model. I am currently using windows vista Home premium and have the cd of windows 7 Professional, but I don't know if the upgrade with this question will repair or remain the same. Someone knows how to fix this?

  Hi Mattcreatr,

  1 can connect to the router with other machines?

  Step 1:

  Make sure you have the latest NETWORK adapter drivers installed.

  Also, see if there is a software that goes along with the drivers.  If so, get the latest version of this as well.

  Update drivers: recommended links

  Step 2;

  Also, see if there is a software that goes along with the drivers.  If so, download the recent plus version and that as well.

  Also, make sure that the wireless adapter is turned on.

  a. Click Start, type network and sharing in the search box Center start and press ENTER.

  b. click on change adapter settings.

  c. right click on the connection, and then select activate.

  Step 3:

  Alternatively, you can perform a restore of the system to a restore point where you do not experience the problem and check.

  Start your computer in safe mode

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• You want to generate a report to see the availability/uptime? Suggestions?

  Management has requested a report of general availability for our media availability. I know there is a metric of availability that is recorded in vCenter, but I'm not sure if it is set to zero whenever a host is restarted or if the incremented in a certain way. They want to see the evolution of the availability of availability for all ESXi hosts for a year.

  Any contribution is appreciated.

  Installed properly, you can have 1 PowerCLI build.

  You can not install 4.1.0 on another customer?

  Or you take the logic of the program and use a script to do the same.

• See the available updates only displays the tabs with no details

  I have Vista Home Premium SP2 (french) successfully updated to date.

  At some point, the "view available updates" stopped Panel showing details (name, type, area of selection...). It shows only type tabs on the side for example 'recommended (2) '. See screen capture:
  http://www.mediafire.com/file/d2yzjmwwkz2/RVCap [16] .mpg

  I haven't hidden updates, or the system can find everything.

  Hello York,.

  Reset the component of windows update and check if the update of the view is always empty. It has Fix tool link below will help you with the same

  How to reset the Windows Update components: http://support.microsoft.com/kb/971058

  If the patch tool does not help, you can follow the procedure manually.

  Check the link below, which had a similar question: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/3b5b49e9-7875-4be7-8c27-41b5bc8426b5

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fix BIOS to see the availability of MMS 'Incursion' attack

  There is the Lenovo https://support.lenovo.com/us/en/product_security/smm_attack Security Advisory

  It specifies the target availability 12/30/2015 for ThinkPad Tablet 8. Is delayed or already fixed in BIOS 1.28 (04/12/2015) as next change?

  • (Fix) Fixed some security issues.

  Hi Puppy,

  I can confirm that the update for Tablet 8 (64-bit) 1.28 v includes the fix for 2015-LEN-002.

• Models of MSP430F5510 to see the availability of Multisim

  Someone has a model for the MSP430F5510 in a packet flat available for Multisim quad?

  Hello

  Only some microcontrollers are supported natively in multisim. The model you are looking for is not in our database, you can try to find a model SPICE of the microcontroller around the web, but I doubt, because they are really hard to program. If you already know what to expect and are looking for a PCB design, I suggest doing an impression of the model for use in a circuit.

  Good luck

• How to check the availability of the ucs?

  Hi all

  I have observed UCS alert on my monitoring tool.

  Service: System availability
  State: OK
  HostGroup: Switch
  Time: Wed Apr 15 19:10:16 UTC 2014
  Additional information: OK: UPTIME = 34 minutes, 11.37

  But when I connected and checked the availability of the system, it has been for a long time:

  System start time: Thu Nov 29 19:17:30 2012
  System uptime: 501 days, 18 hours, 46 minutes, 45 seconds
  The core run time: 501 days, 19 hours, 25 minutes, 11 seconds
  Availability active supervisor: 501 days, 18 hours, 46 minutes, 45 seconds

  Could you please explain any other command to check availability?

  Thank you

  Phani.

  First of all you need to know what the ip address of each fabric, if you don't know what they are you can connect at UCSM (see screenshot drew)

  Once you have the IP for the two fabrics, the IPs SSH and run the following commands to get uptime on every fabric.

  F A # connect nxos

  F A (nxos) # see the availability of the system

• As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will

  As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will be available today?

  Hello

  Yes - Apple advises that watch OS 3 is scheduled to be released sometime today.

• I can't see the list of available wireless even when connected to wireless internet connections.

  I can't see the list of available wireless connections. So I can't connect to new wireless connections as I have not logged in before. The icon in the taskbar that would show you the possible connections disappeared. Nothing shows under connections network under Favorites network even when I'm logged in. I can pick up internet connections from earlier I can't see that one that is connected to or control it. Help, please. Thank you.

  Hi CorneliusE,

  1. what service pack is installed on the computer?

  2. what exactly happens when you try to view wireless networks? You receive error message nay?

  3. do you have security software installed on the computer?

  4 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article and check if that helps you find the wireless network.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  Note: Article applies to Windows XP SP 2, however, can also be tried with other versions of Windows XP as well.

  Method 2: If the method above is not enough, you can consult the following articles and check.

  How to configure TCP/IP to use DNS in Windows XP

  http://support.Microsoft.com/kb/305553

   

  To test TCP/IP connections by using the ping and the commands net view

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

   

  Let us know if that helps.

• I can't see the videos Facebook etc. Rpet Flash player is not available.

  * Original title: Shockwave Flash player

  I can't see the videos Facebook etc.   Rpet Flash player is not available. I tried to click on tool > manage add on > Security > etc, etc.  It said it was installed, but still can not view videos.

  Hello

  For some reason that I thought it was already there... on the left lower taskbar may...

  If not, go to C:\Program Files (x 86) \Internet Explorer\iexplore and make a shortcut to copy on your desktop.

  Sorry... I should have mentioned that before...

• See the Windows 10 virtual machines as "Available" in the administration Console, even while users are connected

  Hello

  I have the situation where a bunch of persistent Windows 10 VM VDI (several pools, all VM 1 by manual pool) are ALWAYS shown as 'Available' in Admin mode, even when a user is connected. Using PCoIP or RDP has no importance.

  Description:

  -All the time, desktop never appears as 'connected' in the Admin view when users log on. It's always 'available', which is dead wrong in the first place.

  -L' use of PCoIP disconnects-> reconnects with PCoIP or RDP.

  -Using RDP at a certain point however, triggers the message of "sources of funds available for this desktop computer are currently busy" clients of the view. Re-login impossible at all from that moment, regardless of the protocol used.

  -Once again, yet these VM Win10 see as "available" regardless of the actual status.

  -There is no firewall between windows 10 VM and connection brokers (who have no problem replication).

  -Restarting the agent from the view and related services does not 'release' of the virtual machine. It will still say 'sources of funds available for this desktop computer are currently busy.

  -Only a restart of the operating system can erase it and make the available virtual machine to connect again.

  -While the virtual machine is amplified shutdown or restart, desktop shows as "inaccessible Agent" so there is communication between Agents and brokers.

  Windows 7 persistent VM works 100% normal in all respects. It's only 10 VM Windows and... Since a round patch in a few weeks (I was this problem since then). Before some patch does this (but have no evidence) these VM Windows 10 has worked well with view 6.2.0

  These virtual machines are highly customized with special software and can not be simply rebuild. I re-install VMtools, view Agent etc etc several times. No dice. Even tried a fresh install of Windows (connected to the same level), still shows this behavior.

  All this started a few weeks back after a round Patch from Microsoft. Then maybe a M$ Patch assigned Agent of the view. So I uninstalled/re-installed the Agent of 62 reviews. Improved 6.2 to 6.2.2 etc. all to nothing does not. New, old, VMtools Agents re-installed. I've tried everything now.

  Has anyone seen this or someone can point me in the right direction for troubleshooting? I haven't noticed any funky stuff in the papers, but I'm probably tunnel vision/search the bad things after all this time.

  I do view since the early days, but I'm really stumped this time. I am all of these ideas.

  I reworded my question in another post and found the answer here:

  Win10 Desktop shows never "connected" while the user is logged

• I have Photoshop Lightroom 5 and you have downloaded Camera Raw 8.7.1 & DNG Converter with success. I have a new model of Sony Alpha 7 11 ILÇE A7M2 which is supported by LR5. I'm still not able to see the RAW images. The message says not available ove

  I have Photoshop Lightroom 5 and you have downloaded Camera Raw 8.7.1 & DNG Converter with success. I have a new model of Sony Alpha 7 11 ILÇE A7M2 which is supported by LR5. I'm still not able to see the RAW images. The preview not available for this DSC - ARW file message says. Whatelse should I do to see my photos? Can anyone help?

  Anita

  Support for the camera has been added in the latest version of Lightroom, version 5.7.1. After you download Camera Raw 8.7.1 will have no effect on Lightroom because Lightroom does not use plug in Camera Raw. You must ensure that you have updated Lightroom to the latest version in order to have support for this camera.

• To run the trial after effects CC version, but don't see not available in the cloud [was: help]

  Help

  Hallo, I want to test after that effects I downloaded the file and instaled creativ-cloud but it doesent sossou sequelae pls help out me

  The usual reason is that After Effects is 64-bit only and requires a 64-bit computer and operating system.

  If you run 32-bit Windows, you may not download, install or run After Effects so you see not available for download in the cloud.

  See http://www.adobe.com/products/creativecloud/faq.html#getting-started

  What desktop applications in Creative Cloud require 64-bit operating systems?

  With the new CC, audio and video applications in most applications pro now requires 64-bit operating systems to run. These native 64-bit applications include Adobe first® Pro CC, Adobe Audition®, After Effects® CC, CC, prelude® CC, and SpeedGrade® CC. Flash Professional CC, CC of Photoshop and Lightroom® must be 64-bit on Mac OS.

• Web pages are also available; Ayed as a list of points instead of a matrix of elements. See the attached screenshots of firefox and chrome on the same page.

  How can I post screenshots to this question?

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Why is-view, see the sidebar not available in Photos 1.5?

  See the side bar is grayed out when you view Photos, shared Albums or projects and I do not know why and don't find anything in help.

  What happens if you press command-option - S

  LN