you want to increase the value of mouse (release)

Similar Questions

• Dell virtual disk are larger. You want to increase the size of the data store.

  Hello

  I started the implementation of a server ESXi 5.5 Update 1 this week. I didn't know Dell shipped the server with two virtual disks instead of one. I realized this _apres_ that I had already created the data store and setup a few virtual machines to the breast. I called Dell who sent specific instructions to increase the removal of the second (empty) virtual disk and add it to the main. In the end, I increased the single VD from 2 TB to 3 TB and I want to give the remaining space in my store of data.

  I tried to follow the article here that explains how to do this via the CLI.

  Well, he did not altogether. Fortunately, I was able to recover my datastore my setting start and end sectors to their original numbers. But I'm still left with this almost 1 TB of space that I can not attribute to the data store. After that I reread storage adapters in the client, the new Dell disk size resulted under measurement devices. Click on "increase...". ", generates the following error which led me on the way to the CLI method:

  Call "HostDatastoreSystem.QueryAvailableDisksForVmfs" to object "ha-datastoresystem" on ESXi '[myservername]' failed.

  I will paste my notes that I took everything by jobs. Things have exploded the rails when I put 4 partition size to the largest size. Any help, please?

  ---

  I use that as a guide:

  http://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2002461

  
  

  1 use start hardware device management tools to increase the capacity of additional disk to the device. For more information, commit your hardware provider.

  This has been done. The new size of the virtual disk is 2791,88 GB (TB 2,79188)

  
  

  2. open a console to the ESXi host.

  Pretty simple.

  
  

  3. get the DeviceID for the data store to change.

  ~ # vmkfstools Pei "/ vmfs/volumes/datastore1 / '.

  System file VMFS-5, 60 extending on 1 partition.

  File system label (if applicable): datastore1

  Mode: public

  Capacity 1971926859776 (blocks of files 1880576 * 1048576), 1042688245760 (994385 blocks) prevail, max size of the 69201586814976 file

  UUID: 534e5121 - 4450-19dc-f8bc1238e18a 260d

  Partitions split (on 'lvm'):

  NAA.6c81f660ef0d23001ad809071096d28a:4

  
  

  A couple of things to note:

  a. the device for Datastore1 ID is: naa.6c81f660ef0d23001ad809071096d28a

  b. the number of Partition on the disk is: 4 ' [...]: 4 "»

  c. the prefix, "naa," means "Network address authority" the number immediately after is a single logical unit number.

  4. Enter the amount of disk space available on the data store.

  ~ # df h

  Size of filesystem used available use % mounted on

  VMFS-5 1. 8T 865.4 G 971,1 G 47% / vmfs/volumes/datastore1

  
  

  5 team of the device identifier, to identify the existing partitions on the device by using the partedUtil command.

  ~ # partedUtil get ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a '.

  364456 255 63 5854986240

  1 63 80324 222 0

  2 80325 8466884 6 0

  3 8466885 13709764 252 0

  4 13711360 3865468766 251 0

  ~ #

  
  

  According to the table in article KB

  4 13711360 3865468766 251 0 - primary #4, type 251 = 0xFB = VMFS, 13711360-3865468766 areas

  | |        |          |   |

  | |        |          |   \---attribut

  | |        |          \---type

  | |        \---se finishing sector

  | \---a starting from sector

  partition \---Numero

  
  

  Also note how the number of section start the old end sector number is + 1.

  
  

  6 identify the partitions that need to be resized and the size of the space to use.

  We want to resize partition 4. I don't really understand the last part of this sentence, however. Read more.

  
  

  7 the number of sector end you want for the target data store VMFS partitions. To use all out at the end of the disc space, remove 1 of the size of the disk in the areas as described in step 5 in order to get the last usable area.

  ESXi 5.x has a command to do this:

  ~ # partedUtil getUsableSectors "/ vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a".

  1 5854986239

  This means that we want 4 Partition of "naa.6c81f660ef0d23001ad809071096d28a" to be:

  13711360 - 5854986239 (i.e. the end of the disc)

  
  

  8 resize the partition containing the target VMFS Datastore using the command partedUtil, specifying the original existing partition and the desired end sector:

  Using the above information, our command is:

  resize # partedUtil ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a ' 4 13711360 5854986239

  
  

  9 step 8, the partedUtil command can report the warning:

  He did not. Displacement.

  
  

  10. the tables of partitions have been adjusted, but the VMFS data within the partition store is always the same size. Now there is an empty space in the partition where the VMFS data store can be grown.

  
  

  11 launch this v vmkfstools command to perform a refresh for VMFS volumes.

  Fact.

  
  

  12 reach the VMFS Datastore in the new space using the command - growfs vmkfstools, specifying the partition containing the VMFS Datastore target twice.

  vmkfstools - growfs ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a:4 ' ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a:4 '.

  
  

  It did not work. I got an error:

  / vmfs/volumes # vmkfstools - growfs ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a:4 ' /vmfs/devices/disks/naa.6c81f660ef0d «»

  23001ad809071096d28a:4 ".

  Cannot get device head way /dev/disks/naa.6c81f660ef0d23001ad809071096d28a:4 information

  
  

  Also the partition was very different to what I asked:

  ~ # partedUtil get ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a '.

  364456 255 63 5854986240

  1 63 80324 222 0

  2 80325 8466884 6 0

  3 8466885 13709764 252 0

  4 13711360 1560018942 251 0

  
  

  I fixed it by running these commands:

  ~ # partedUtil resize ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a ' 4 13711360 3865468766

  ~ # vmkfstools v

  ~ # partedUtil get ' / vmfs/devices/disks/naa.6c81f660ef0d23001ad809071096d28a '.

  364456 255 63 5854986240

  1 63 80324 222 0

  2 80325 8466884 6 0

  3 8466885 13709764 252 0

  4 13711360 3865468766 251 0

  Update:

  Since it was such a new machine, not in active production, we have safeguarded the VMs management off the ESXi host. Then flattened the virtual disk, recreated, and then created a store of data with the right size. (TPG this time, naturally.) We put the management of virtual machines on the data store. For Windows virtual machines, we have restored the using AppAssure. Everything is ok now.

  Need to add a new item to the list of punch: check what Dell has done the configuration of the virtual disks. :-)

• HP Pavallion 2236tx g6: you want to increase the RAM

  I want to know if it is possible to increase the RAM of my laptop from 12bg 8 gb or 16 GB. I use HP Pavallion 2236tx g6

  Hello

  Your laptop will support a maximum of 16 GB of ram (2 x 8 GB modules) - for example, an appropriate upgrade can be seen on the link below.

  http://EU.crucial.com/EUR/en/Pavilion-G6-2236tx/CT6931954

  Kind regards

  DP - K

• Do you want to save the changes you made

  Hi guys,.
  
  I need your help
  
  I ve a form that retrieve data on employees.
  
  There are 8 blocks in the form,
  
  I created a when trigger click mouse to display a LOV
  
  
  declare
  a Boolean value;
  Start
  a: = show_lov ('TEST');
  pc_execute; -calling a procedure
  END;
  
  but it gives you want to save the changes you have made?
  and I tried to delete it by setting the level of message system = 25
  but no advantage,
  
  And if I write:
  declare
  a Boolean value;
  Start
  a: = show_lov ('TEST');
  GO_BLOCK ('ORG_EMP_INCREMENT_HISTORY');
  pc_execute; -calling a procedure
  END;
  
  the message will disappear, but the query will run not all blocks
  
  
  ANY suggestions
  Best regards

  El-Hamdulellah

  Pls to mark your Question and the correct answer...

  and erase what was you meant to do?

  To help others with the same problem...

  Kind regards

  Abdetu...

• Increase the values for the new month

  In my mind, this should be a simple, but I can't go to my search term to get information on what command I need.
  
  I-> Nov forecast values and I want to copy the values of prediction-> Dec and increase 2%
  
  What commands would allow me to do it for all members of the dimension account 1 250 level 0?

  Yes, but you could also just use the following:

  SET CREATEBLOCKONEQ ON;
  
  FIX( FY08, Version1, Forecast)
      Dec = Nov * 1.02;
  ENDFIX
  

  The SET statement is necessary only if time is scarce and you have only the default.

  That said, an approach datacopy has other advantages, it's just faster to use the above as it does in one pass instead of two.

• I own a Macbook pro mid 2012. Now I want to increase the RAM of 4 GB to 8 GB, please suggest if this update will help me to improve my performance to macbook.

  I own a Macbook pro mid 2012. Now I want to increase the RAM of 4 GB to 8 GB, please suggest if this update will help me to improve my performance to macbook.

  It will help in cases where the applications require more than 4 GB of RAM.  Otherwise, there will be no noticeable difference.  If you really want to increase the speed, an SSD is the best option.  They cost about 3 x's + more than a traditional HDD of same capacity...

  Ciao.

• How to stop the pop up message: do you want to add the _ directory to your search path?

  After you install LabVIEW 8.6.1f1 on a new PC, every time I choose one of my screws via her select a VI... palette, I get a pop up message saying: ' you want to add the "P:\CWalker\COREYs LabVIEW subs projects\Phoenix" directory to your search path?

  I've already added 'LabVIEW P:\CWalker\COREYs subs projects\Phoenix' in the option search for VI and restarted path LabVIEW, but the message does not appear.

  Yes, this is how I added the directory.

  Since then, I managed to stop the pop-up message.

  Of course, I had deleted some of the default values, such as "-*" of the VI option search path and that caused the popup message.

  Thank you!

  Corey

• I want to increase the performance of the PC using Readyboost

  Here are my stats to computer

  Windows vista home (32-bit) sp2
  Intel Pentium Dual CPU E2160 @ 1.80 Ghz
  2 GB of RAM
  now I want to increase the performance of the pc using readyboost
  How can I do
  also how can I get the max of readyboost performance
  is there a support for an external device?
  thnx in advance
  Original title: readyboost

  Hello

  'ram 2 GB'

  You have too much RAM for Readyboost work effectively.

  ReadyBoost is designed for machines that have between 500 MB - 1 GB RAM

  The physical RAM you have installed, less you will notice an improvement using Readyboost.

  This is a very good tutorial on how to configure Readyboost:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  See you soon.

• Backup utility Windows 7 application ' are you sure you want to remove the most recent data from the backup file "even if I'm trying to remove the backup set is not the most recent.

  I'm trying to reduce the amount of space that my Windows 7 backup uses so I've come to the place in Windows 7 backup:
  Manage space > view backups...

  I am then presented a list of three backup sets:
  01/03/2012 to 01/04/2012
  12/07/2011 to 12/21/2011
  23/11/2011 to 30/11/2011

  I would like to remove the older two, leaving the most recent. However, this doesn't seem to work as expected. If I try to delete one of the two most recent ones (the first two in the list above) I get the following warning "Are you sure you want to delete this backup file.

  However, if I try to delete the last one in the list, I get a slightly different error "Are you sure you want to remove the most recent data of the file backup?"-sounds strange because it is clearly not the most recent backup according to the dates it's show.

  Of course, I can go ahead and ignore the warnings, but I fear that maybe there are some files in the last backup the value in the list that may not be right more recent set backs.

  In 2011, I thought this might be something wrong with the date formats vs US UK (I am in England so the above dates are in dd/mm/yyyy format and not in jj/mm/aaaa) - but now it's 2012 and I backup from 2012 and 2011 games and he always seems to think that the oldest backup of 2011 is the most recent.

  Any ideas? Can I delete the oldest backup sets (that is, the two that are from 2011) safely?

  Any help much appreciated - thank you.

  Simon

  Update: I checked on other PCs in the office and the situation is the same - is not only something strange on a PC.

• How to increase the value of prcesion in the ATG

  Hi all

  Is there some way I can increase the value of accuracy in the ATG, I have items with prices at 0.00 X format. But ATG round internally these prices up to 2 digits after the decimal. Is there a way I can expand this limit to 3 or 4 digits.

  Thank you

  Jitendra

  To increase accuracy, you can change the roundingDecimalPlaces property in/atg/commerce/pricing/PricingTools.

  Hope this helps

  Angelique

• Do you want to save the changes

  Hi all

  6i dev,

  I always get him 'do you want to save the changes you have done"message when I open my form and try to run the query.

  without to make anychanges.

  ??

  Thank you

  I found it, I'm assigning a value to an element in a trigger a time new form instance

  Thank you

• Get the message "do you want to save the changes you made?

  Hi all
  
  I activated the zoom for the standard form of profiles (applications developer) open a new custom form that is used to enter additional information for profiles.
  Two fields profile option id and the profile on the new form option name should get the value in the calling form. Based on these values the new form should show the custom intermediate table data if the record exists.
  If there is no data in this profile of the user must be able to enter information and create new record and commit to the DB table.
  If there is data in the file should be displayed and if the user updates of any field, you have to refresh the record in the DB table.
  I created two new parameters in the new profile_option_id and profile_option_name form which gets its value from the calling form through the custom.pll changes.
  Now, when the new form opens, I see the 2 default fields. But it pops up the message "do you want to save the changes you made?
  If I say no, then the data are displayed for the existing record. If I click Cancel, and then nothing happens.
  Please help me to understand the reason for the pop-up message when the form is opened.
  I changed only a TIME-NEW-FORM-INSTANCE trigger to the new form.
  
  Start
  If (: parameter.profile_option_id is not null) and (: parameter.profile_option_name is not null)
  then
  set_block_property ('NAPP_USR_PRF_OPTIONS_TBL', DEFAULT_WHERE, 'profile_option_id =' |: parameter.profile_option_id |) "(ET profile_option_name = ''' ||: parameter.profile_option_name || ''');"
  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_id: =: parameter.profile_option_id;
  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_name: =: parameter.profile_option_name;
  end if;
  GO_BLOCK ('NAPP_USR_PRF_OPTIONS_TBL');
  execute_query();
  end;
  
  I use form 10g and DB version is 11.2.0.2.0
  
  Thank you
  Chrystel

  Hi Olivier,.

  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_id: =: parameter.profile_option_id;
  : NAPP_USR_PRF_OPTIONS_TBL.profile_option_name: =: parameter.profile_option_name;

  GO_BLOCK ('NAPP_USR_PRF_OPTIONS_TBL');
  execute_query();

  After having assigned the value in any field and then using exectue_query triggers the message.
  If option 1 is...
  If you need to assign then first use execute_query; then assign a value

  Option 2 is...
  Use commit_form and then use execute_query;

  I hope this helps...

  Hamid

• Increase the value of a variable

  I start with a code number which has a length fixed, lets say
  AA32-BB32-CC129
  Basically what I'm doing, is to increase the value of each digit based on another number say 2.
  for example
  AA32-BB32-CC129 = CC54-DD54-EE341
  
  I guess I should use the "++" operator but do not know how to increase each value separately, including
  letters in the equation and how to ignore dashes. I searched and havn't found something to help. If you can help or point me in the right direction it would be much appreciated.
  Thank you

  Well, it's not otherwise delicate. It ' l give you an example and you walk through it. The first thing we do is to create a function for manipulation of this variable:

  function addValue(incr:Number) {}

  Incr will be what we add to the value of each number. Now, we separate the string into an array, using a separator so that each character gets his own position in the table.

  var tempArray:Array = changeCode.split("");

  Second, we loop the array and check every post to see if there is a number and if this is the case, add the incr value:

  for (var i = 0; i)<>
  If (! isNaN (tempArray, )) {}
  tempArray = parseInt (tempArray, ) + incr;
  }
  }

  Now join us just the table again and we're done!

  changeCode = tempArray.join("");

  I hope this helps!

• Useless the question «Do you want to save the changes...» »

  Hello again,
  
  I have a block of several recording on the single update is allowed and two buttons: accept and reject. There are three possible ways of changing records:
  1. change the values in some fields and validation - which works very well;
  2. changes to the values in some fields and tap on accept button;
  3. change the values in some fields and press the reject.
  
  Buttons have implemented the delete, update, insert into some tables using a stored pl/sql package. At the end of the treatment, for the two buttons, "accepted" or "rejected" folder disappears from the block - using execute_query. Problem is that if some values were changed before pressing the button, warning window appears: "Do you want to save the changes you made?" which is in this case useless and boring. How can I get rid of this message?
  
  Thank you in advance.

  execute_query (no_validate)

• "How to stop this message"do you want to install the plugin required to view media on this page.

  How to stop this message "do you want to install the plugin required to view media on this page.

  I don't need the plugin to play the video ok

  If it comes from the Flash plugin you can switch pref plugins.notifyMissingFlash false on the topic: config page.

  You can open the topic: config page via the bar of address and you can accept the warning and click "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config