Non-registered orders

Similar Questions

• Non-registered SX-10 Cisco

  Hello

  I installed my SX-10 but there is a message at the top on the right that it is "not registered".

  Does that mean and what should I do?

  Thank you!

  This means that it is not registered with a CUCM or VCS etc.

  See the administration guide for how to configure it if you are using a device like a CUCM or VCS callcontrol.

  If you use it as a 'stand-alone' system, you can delete this message by changing the 'Type of ContactInfo SystemUnit"to one of the other options, i.e. IP address, name of the system and it will be displayed in the place - or set it to 'None' not have anything posted yet again, see the Administrator's guide.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• I'm unable to send iMessage, because the phone number of the recipient is "non-registered" even if I got the same phone number iMessaged last week.

  How can I fix this intermittent problem with iMessage?  How do I "register" phone number of someone with iMessage?

  Hey aggiedoc69,

  I understand you have a problem with an iMessage sending to a friend of yours. Let's see if we can get this sorted out.

  One thing to try is to remove the conversation that you have with that person and send a message to them in a new conversation. Take a look at the article for this and other troubleshooting options. You can also suggest your friend try these steps as well.

  If you can't send or receive messages on your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT204065

  Take it easy

• TEMPRO displays guaranteed non-registered in the toshiba site it is!

  TEMPRO shows my warranty status as not registered.
  Toshiba Product Registration website is my inscription normally...

  The only difference is that on the site web Toshiba warranty registration as model No. my part number, it is my warranty normally
  Also looking for warranty Toshiba service does not work, it just displays my no serial without further details.
  Is it a mixup in the toshiba databases?
  Any ideas on how to solve this problem?

  Hello

  I put t know software Tempro means exactly, but usually it scans the HARD drive and watch them installed drivers Toshiba, tools and utilities.
  The new version would come out then Tempro if you send a notification and a recommendation for an update.

  With regard to the guarantee.
  For details of the warranty, you need the serial number of the laptop. I put t know if Tempro looks like for the serial number or model number only, but if you want to be sure your warranty status, then you can check this page from Toshiba:
  http://www.toshiba-tro.de/unitdetails/

  Welcome them
  Jeffrey

• Non-deterministic order of LabVIEW 2012 SP1f5 events

  The attached VI may be used to demonstrate that the order that the events are handled by the structure of the event is not deterministic. (i.e. which cannot be inferred from the order in which they are generated). Placing the generation of user event at different locations in the sequence renders unexpected results. In LabVIEW 2013 but the behavior is deterministic (i.e., it follows the logic that I always apply, events are handled in the order they are generated.

  My question:

  Can anyone confirm this in 2012 (bad behavior, IMO) LV and LV 2013 (expected behavior, IMO)?

  We must make a choice to move a major to LV 2013 project as soon as possible or it differ a bit.

  Thanks a lot for people who are trying.

  VI is recorded in LV 2012.

  I cannot look at the code, but according to the description, this sounds like what has been discussed in this thread - http://lavag.org/topic/9986-out-of-order-events-is-not-a-bug-sort-of/

  The good news is that changes made to events in 2013 also includes the fix for this problem, so I would say that you need to update (or use one of the workarounds described in this thread).

• Need help with simple non-registered form if is displayed.

  Hello

  I'm assembling a script complex but I will start with the first statement logice.

  Essentially at the beginning, I need to know how to write a script that uses the logic if the form is NOT saved, then display message, you need to first save the form.

  It is for this part! Thank you.

  Hello

  You can do this way.

  Acrobat/Reader uses the so-called State dirty indicator if you made changes to the form.

  var dFlag = event.target.dirty

  If (dFlag is true)

  {

  xfa.host.messageBox ("form not was not yet registered");

  }

  on the other
  {
  code to run the case...
  }

• I get the message "Backup non-registered" with error code 0 x 80040154

  Original title: 0 x 80040154

  is constantly on saying not save regegisterd 0 x 80040154

  Hello

  1. when the question is is produced?
  2. you remember of any changes to your machine before the question?

  I suggest that you follow the steps mentioned below.

  Step 1:

  The problem may be related to your security program. I suggest you temporary disable anti-virus and firewall and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Run SFC analysis on your machine to verify if this is related to the missing or corrupted system file.

• Can win 7 OEM (non-registered), I use a license 'UPGRADE' to the registered OEM?

  I got a version of Win7 Home Premium OEM for my brother and I did a clean install on a new HARD drive. It turns out that my brother has already used the license and run on his computer and doesn't have to tell me. So now I have a Win7 Home Premium 64 bit edition OEM version OS on my computer and it will expire in 30 days. If I buy the pack family 3 of 'UPGRADE', can I use this license to the upgrade for my already loaded OEM Win7 not saved on my computer?

  Basically, I want to use the UPGARDE license for my version already loaded Win7 OEM license and work on my new computer, I built. IS this possible?

  I got a version of Win7 Home Premium OEM for my brother and I did a clean install on a new HARD drive. It turns out that my brother has already used the license and run on his computer and doesn't have to tell me. So now I have a Win7 Home Premium 64 bit edition OEM version OS on my computer and it will expire in 30 days. If I buy the pack family 3 of 'UPGRADE', can I use this license to the upgrade for my already loaded OEM Win7 not saved on my computer?

  Basically, I want to use the UPGARDE license for my version already loaded Win7 OEM license and work on my new computer, I built. IS this possible?

  Hey bLACKLUNG

  You must have a legitimate operating system and enabled to upgrade

  so no, you can not use a license upgrade to install windows 7 on top a trial windows version 7, which you are now

  You can buy windows 7 Home premium from microsoft link below

  Make sure you get the full version

  http://store.Microsoft.com/Microsoft/Windows-7-Home-Premium/product/7ADA0BF6

  Walter, the time zone traveller

• Media remote app unable to register

  We recently bought blu - ray S590 player and were trying to use the remote media on android app. The application is able to see the unit on non-registered devices. But when I click on the device icon it restarts and goes back to the home screen. the same phenomenon occurs when I click button th 'i' next to the icon and then click on registration. This seems to be a problem with android app, as we were able to test it on an iphone. Help, please

  Hi vaibhav,

  Welcome to the community of Sony!

  I suggest that you try the steps mentioned on the underside of bandages to solve this problem:

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1020792

  http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1031155

  If my post answered your question, please mark it as an "acceptable Solution".

  Thank you for your message.

• OIM11gR2 - remove registered handler

  Suite of the official docs develop handlers - 11 g Release 2 (11.1.2) I am able to create/register/order/migrate the custom event handlers, but what I need and that is not documented is how to remove a registered handler.

  Can someone help, I'm on OIM11.1.2.0.7?

  Solved

  Erroe: there was some old/false under folders/server/JavaTasks file and/Server/plugins /

• Virus + HIREM ceased from Windows startup - SP2 disk stolen - options?

  A virus stopped my work of Windows XP.

  I managed to activate an installation folder of Windows XP prior to make it work, BUT

  I used what I found later be a non registered hirem fix CD -.

  HIREM then something deleated in the programs/Windows structure now means that I can not get this boot disk.

  I plugged a plu smaller drive that gives me a Windows XP and Internet - access with my now non bootable XP disk attached and legible on the USB port.

  How can I replace the files on the disk that has no working Windows?

  My Windows XP CD was stolen while I was in South Africa!

  Keith

  Hi Keith,
   

  There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Therefore, I recommend you to get a replacement CD by contacting the Microsoft Supplemental Parts team.

  For more information, see:

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  Also, I suggest you use the Microsoft safety scanner to keep your computer clean.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• R31 Question Ram

  Hello

  I had just taken in the mail I ordered for my Thinkpad R31 of RAM. on the lenova support the following details of the section of the web site the cottage

  ThinkPad 512 MB SDRAM SO DIMM

  3.3 volt, 144-pin, without parity, 64-bit, 133 MHz SDRAM memory

  If I had gone from ebay and bought the following

  • Kit of 2 x 512 MB SDRAM PC133
  • Laptop computer memory
  • SODIMM
  • 133 Mhz
  • 64Mx64
  • 144 pins
  • Unbuffered, Non-ECC, Non-registered
  • 3.3V
  • CL 3

  but when I tied just to install new RAM on the bios, it says

  1044 past or something like that. but when I booted windows (XP), once I had ot where the screan connection should be I had the blue screen...

  anyway I wonder, am I missing something. or is there something that I forget...

  THX

  Eragon55

  Hello again,

  I asked around on freenode and someone reported me a tester to see if the memory works correctly. I ran the test and discovered that one of the sticks of RAM did not work right. so I took the stick and put in a stick of 252 MB, who was there. and restarted. now, there's no problem.

  THX once again

  Eragon55

• Cell TableView coloring on updates - realizing if sort happened

  I'm doing has highlighted cells (in color) in a TableView whenever they are updated. My solution is based on the implementation of cell factories and use Animation (mounting) control cell background opacity - it works very well: whenever a cell value is updated, the background changes color, then fades away well.

  The problem is, that if the table is sorted by clicking a column header, the underlying list is changed (of course), and the GUI level, it is also understood as a change and depending on the circumstances by cell (I flash a cell if its new value is different from the previous), several cells show an update unnecessarily (flashing).

  I wonder how I could eliminate if a cell has been updated due to a 'real' update (an element has been updated) of the case when the list sort column and/or the order has been changed? I thought to catch the event of sorting (by adding an InvalidationListener to the sort order list) and ignore the updates, while it is underway, but I can't really know when it's over. I bet at the GUI level, there is no way to determine the reason, so I need a deeper understanding...

  Thanks for the tips.

  Register a listener for change with the appropriate property to change the highlight color for the cell according to the case. You need to do a bit of work to make sure that the listener is registered and non-registered as appropriate that the cell is reused for the different table elements: the trick is to use

  Bindings.Select (tableRowProperty (), "point")

  to get an observable of the current value of the line.

  Update:

  Well, the previous example did not work. For reasons I can't understand, after sorting (or scroll, in fact), the evil cell became the property change notifications.

  So here's another strategy: keep track of the last known value of the cell line, and don't make the highlight is still called same rank value after the update. I prefer kind of the strategy described above, but I couldn't make it work.

  import java.text.NumberFormat;
  import java.util.Arrays;
  import java.util.List;
  import java.util.Random;
  
  import javafx.animation.FadeTransition;
  import javafx.animation.KeyFrame;
  import javafx.animation.Timeline;
  import javafx.application.Application;
  import javafx.beans.property.DoubleProperty;
  import javafx.beans.property.ReadOnlyStringProperty;
  import javafx.beans.property.ReadOnlyStringWrapper;
  import javafx.beans.property.SimpleDoubleProperty;
  import javafx.event.ActionEvent;
  import javafx.event.EventHandler;
  import javafx.geometry.Pos;
  import javafx.scene.Scene;
  import javafx.scene.control.Label;
  import javafx.scene.control.TableCell;
  import javafx.scene.control.TableColumn;
  import javafx.scene.control.TableView;
  import javafx.scene.control.cell.PropertyValueFactory;
  import javafx.scene.layout.BorderPane;
  import javafx.scene.layout.StackPane;
  import javafx.scene.paint.Color;
  import javafx.scene.shape.Rectangle;
  import javafx.stage.Stage;
  import javafx.util.Callback;
  import javafx.util.Duration;
  
  public class TableChangeHighlightExample extends Application {
  
   @Override
    public void start(Stage primaryStage) {
      final Random rng = new Random();
    final TableView table = new TableView<>();
    table.getItems().addAll(createData(rng));
  
    TableColumn symbolColumn = new TableColumn<>("Symbol");
    TableColumn priceColumn = new TableColumn<>("Price");
    symbolColumn.setCellValueFactory(new PropertyValueFactory("symbol"));
    priceColumn.setCellValueFactory(new PropertyValueFactory("price"));
    priceColumn.setCellFactory(new Callback, TableCell>() {
        @Override
        public TableCell call(TableColumn table) {
          return new StockPriceCell();
        }
    });
    table.getColumns().addAll(Arrays.asList(symbolColumn, priceColumn));
  
    Timeline changeStockPricesRandomly = new Timeline(new KeyFrame(Duration.seconds(2), new EventHandler() {
      @Override
      public void handle(ActionEvent event) {
        StockValue stockToChange = table.getItems().get(rng.nextInt(table.getItems().size()));
        double changeFactor = 0.9 + rng.nextInt(200) / 1000.0 ;
        double oldPrice = stockToChange.getPrice();
        double newPrice = oldPrice * changeFactor ;
  //     System.out.println("Changing price for "+stockToChange+" to "+newPrice);
        stockToChange.setPrice(newPrice) ;
      }
    }));
    changeStockPricesRandomly.setCycleCount(Timeline.INDEFINITE);
    changeStockPricesRandomly.play();
  
    BorderPane root = new BorderPane();
    root.setCenter(table);
    primaryStage.setScene(new Scene(root, 300, 400));
    primaryStage.show();
    }
  
    private List createData(Random rng) {
      return Arrays.asList(
        new StockValue("ORCL", 20.0 + rng.nextInt(2000)/100.0),
        new StockValue("AAPL", 300.0 + rng.nextInt(20000)/100.0),
        new StockValue("GOOG", 500.0 + rng.nextInt(100000)/100.0),
        new StockValue("YHOO", 20.0 + rng.nextInt(2000)/100.0),
        new StockValue("FB", 20.0 + rng.nextInt(1000)/100.0)
      );
    }
  
    public static void main(String[] args) {
    launch(args);
    }
  
    public static class StockPriceCell extends TableCell {
      private static final Color INCREASE_HIGHLIGHT_COLOR = Color.GREEN ;
      private static final Color DECREASE_HIGHLIGHT_COLOR = Color.RED ;
      private static final Duration HIGHLIGHT_TIME = Duration.millis(500);
  
      private static final NumberFormat formatter = NumberFormat.getCurrencyInstance();
  
      private final Label priceLabel ;
      private final Rectangle overlayRectangle ;
      private StockValue lastRowValue ;
  
      public StockPriceCell() {
        overlayRectangle = new Rectangle();
        overlayRectangle.setFill(Color.TRANSPARENT);
        overlayRectangle.widthProperty().bind(this.widthProperty().subtract(8));
        overlayRectangle.heightProperty().bind(this.heightProperty().subtract(8));
        overlayRectangle.setMouseTransparent(true);
  
        this.priceLabel = new Label();
        priceLabel.setMaxWidth(Double.POSITIVE_INFINITY);
        priceLabel.setAlignment(Pos.CENTER_RIGHT);
        StackPane pane = new StackPane();
        pane.getChildren().addAll(overlayRectangle, priceLabel);
        setGraphic(pane);
      }
  
      @Override
      protected void updateItem(Double price, boolean empty) {
        Double oldPrice = getItem();
        super.updateItem(price, empty);
        StockValue currentRowValue = null ;
        if (getTableRow()!=null) {
          currentRowValue = (StockValue) getTableRow().getItem();
        }
        if (empty) {
          priceLabel.setText(null);
        } else {
          priceLabel.setText(formatter.format(price));
          if (price != null && oldPrice != null && currentRowValue == lastRowValue) {
            if (price.doubleValue() > oldPrice.doubleValue()) {
              overlayRectangle.setFill(INCREASE_HIGHLIGHT_COLOR);
            } else if (price.doubleValue() < oldPrice.doubleValue()) {
              overlayRectangle.setFill(DECREASE_HIGHLIGHT_COLOR);
            }
            FadeTransition fade = new FadeTransition(HIGHLIGHT_TIME, overlayRectangle);
            fade.setFromValue(1);
            fade.setToValue(0);
            fade.play();
          }
        }
        lastRowValue = currentRowValue ;
      }
    }
  
   public static class StockValue {
      private final ReadOnlyStringWrapper symbol ;
      private final DoubleProperty price ;
      public StockValue(String symbol, double price) {
        this.symbol = new ReadOnlyStringWrapper(this, "symbol", symbol);
        this.price = new SimpleDoubleProperty(this, "price", price);
      }
      public final ReadOnlyStringProperty symbolProperty() {
        return symbol.getReadOnlyProperty();
      }
      public final String getSymbol() {
        return symbol.get();
      }
      public final DoubleProperty priceProperty() {
        return price ;
      }
      public final double getPrice() {
        return price.get();
      }
      public final void setPrice(double price) {
        this.price.set(price);
      }
      @Override
      public String toString() {
        return symbol.get() + " : " + price.get() ;
      }
    }
  }
  

  Post edited by: James_D

• MacPro mid-2010 RAM upgrade

  Hello!

  I've got this MacPro (8-core 2,4 / mid-2010), and I can't seem to find new 1066 MHz DDR3 RAM buy to the Brazil.

  I can only find 1333 MHz or higher available. Do you know if one of these newer DDR3 would work with it?

  Thank you!

  1333 MHz RAM works perfectly if the manufacturer declares that they will work in a Mac Pro 2012.

  The only problem you might have is the mixture of memory speeds.

  Also, you can mix the memory ECC and non - ECC

  In addition, you can not mix registered and non-registered RAM. Usually 16 GB and more big sticks are recorded.

  I upgraded the memory I have my Mac Pro 2013 (1866 MHz) and deleted memory worked fine in my Mac Pro 2009 but ran at 1066 MHz

• Unable to send photos or to receive photos on Skype

  Yes, you guys know this already. I can't receive pictures or send pictures via Skype. That's essentially what I have.

  MSNP: Connection data (MSNP24):
  * Status: NetStateConnecting.Backoff
  * Current server: s.gateway.messenger.live.com
  * Server registered: s.gateway.messenger.live.com
  * EPID: 4a405207-3448-76cf-13be-e9bbd80e150f
  * ClientVersion: 0/7.26.85.101//
  * OSVersion: Windows 10.0 (build
  * Time: TZ: UTC - 4, Server: 0, Local: 1471794034
  * Connection: IF: 0 DC: RC 47:
  * B: 0 CS: [B:0 [S: 0] MO:1 CWB:1
  * The last log: bn2 - s.gateway.messenger.live.com @ 2016-07-22 T 11: 45:32Z
  * The last log: bn2 - s.gateway.messenger.live.com @ 2016-07-22 T 03: 23:50Z
  * The last log: bn2 - s.gateway.messenger.live.com @ 2016-07-22 T 03: 23:28Z
  * The last log: bn2 - s.gateway.messenger.live.com @ 2016-07-22 T 03: 22:33Z
  * The last log: bn2 - s.gateway.messenger.live.com @ 2016-07-22 T 02: 12:39Z
  * Push: No (non-registered)

  Hotmail and omitted Username. Any ideas? I use the latest version on Windows 10, the latest version.

  Your Skype is not always connected to the Cloud server.

  The correct State shall be:

  Status: NetStateConnected

  Check your hosts filein Windows, DNS/VPN/proxy settings.

  Try first to reset your Windows hosts file:

  https://support.Microsoft.com/en-us/KB/972034