Z2: Contact Photos don't show up when you call

Similar Questions

• Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  If she don't remember: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• Why the rejection of multiple photos doesn't work anymore when you change pictures?

  Why the rejection of multiple photos doesn't work anymore when you change pictures? Does anyone else have this problem? It works on my other Mac but just stop working on my computer laptop pro, I have the latest OS and it worked until a few weeks ago. Thanks for any help!

  Selection of several photos at once enter "9" to reject all still works them for me in Aperture 3.6 on El Capitan.

  Have you tested, if the problem occurs only in an Aperture library or libraries opening?

  Create a new Aperture library to test and see rejection, so it works.

  If it does not work in a new library either, I got trash Aperture preferences.

  In preferences file is now in the container folder in the user's library.

  Try this:

  • Leave the opening runs.
  • Then open your user library and delete the folder complete ~/Library/Containers/com.apple.Aperture/
  • and the ~/Library/Preferences/com.apple.Aperture.plist file

  Your user library can still be hidden. To reveal the hidden user library:

  • Bring the Finder to the front by clicking on the desktop or the Finder icon in the Dock.
  • Select your folder user/home (with the House icon in the side bar of the Finder)
  • With this window in the Finder in the front window, press the ⌘J key combination to bring up the display options.
  • In the view options panel allow you to "show the library folder. That will make your visible user library folder in your folder.
  • Open your folder, then the library folder, then the containers.
  • Move the entire folder ~/Library/Containers/com.apple.Aperture on your desktop. Move the entire folder, not just the content.
  • Delete ~/Library/Preferences/com.apple.Aperture.plist as well.

  Now, restart the Mac, start Aperture and try see your book.  If all goes well, delete the folder on the desktop.

  Re: Viewer has been reduced mode Photobook

• Pass a function when you call onClick for a button (UI)

  Hello

  I m now studying and I adventure in the creation of the user interface of the Script. I m enjoy!

  I m having the following problem: I have added a button in a dialog box and want to tell script to execute some commands when users click the button. It is therefore a simple (bad example):

  var DLG = new window ('dialogue', 'My dialogue box', [0,0,0,0])

  DLG. Size = [500 500]

  DLG. Location = [300 300]

  var b = dlg.add ("button", [0,0,0,0], "Run")

  b.Location = [20, 180]

  b = [80, 30]

  DLG. Show()

  b.onClick = test () //the problem is here

  function test() {}

  Alert ("test")

  }

  -------

  All is fair. But the onClick event fails the test of the function I m passing! What Miss me?

  I know if I'm using

  b.onClick = function () {}

  ...

  }

  It works... but I´d as the function to call when you call the onClick instead of directly created. Do not know if I m able to explain it better.

  Thank you for the help

  Best regards

  Gustavo.

  The standard would be...

  var dlg = new Window ("dialog", "My dialog", [0,0,0,0])
  dlg.size = [500,500]
  dlg.location = [300,300]
  var b = dlg.add("button", [0,0,0,0], "Run")
  b.location = [20, 180]
  b.size = [80, 30]
  b.onClick = function(){ //the problem is here
  test();
  }
  dlg.show()
  function test(){
    alert("teste")
  }
  

• Synchronize data when you call another VI

  Saying: I A.i and B.vi called B. I want to display a waveform to A and B collects data in a while loop.

  The question is how the waveform is updated in real time, then B is running? I tried global variables, but looks A.i isn't in the thread when you call B, so the data may not switch to A real-time.

  Any suggestions?

  You want to search for ' Producer/consumer' of info on this design pattern. It consists of a producer who share data using a Motor of Action or a queue to pass data between threads.

  Another approach might be to use a control reference for waveform display (table or graph) and use 'the 'Value' property to write to the display in a manner SIMILAR to the writing comes to the Terminal.

  Ben

• FRM-40735 / ORA-06508 when you call procedure of a fastened package

  Hi all
  I have a problem when you call a procedure in one of my attached libraries. the code is:
  
  When upper (trim (NOT_MSG_NAME)) = "REN_MSG_REQ_REG_PERMENANT" then SERV. CLFRM_PBL_NRQP_F(:Parameter.NOTIFICATION_ID);
  
  and it gives me FRM-40735 indicating that an ORA-06508 has occurred during the call to the procedure.
  Important and funny thing is when I add the path to the library, it works very well!
  When I join, remove the path, it won't as I said...
  
  the location of the library is: D:\DevSuiteHome\cgenf61\ADMIN, the path is added in the FORMS_PATH and all others
  libraries attached to the form in the same way are working well!
  
  I use the Forms 10.1.2.0.2 generator and the platform is windows and I migrated forms 9.0.4.0.19
  anyone with any ideas what may be the problem?

  Hello

  Please check the path again and also to create working directory by modifying formsweb.cfg.

  hope this helps you.

  Sarah

• BlackBerry smartphones HELP! contacts not found, after importing SIM but names appear when you call...

  I JUST got my blackberry and am so confused.  There is so much to learn... but first, I need to know how and where my contacts because they don't show in my address book.  When I type in the actual call numbers and the press, the name of the contact but when I try and text someone, there is no name in my address book to send text to!

  Please HELP as soon as possible.  I consider myself very good w / technology, but I'm having difficulties with this.

  Thank you!

  So when you go into the address book, display the menu, select SIM Phone Book. All the names are actually after it is loaded. If so try to display the menu and select copy all to the address book. If you have already done this the and address book is displayed check empty and make sure that no filter is enabled. In the address book displays the menu and select filters and make sure nothing is checked

• I use the bookmarks on the right showing that when you click on 'Favorites', but today the old bookmarks still to this day on the left appeared also. How can I get rid of him?

  I tried to do a right click on bookmarks, list on the left, but no menu appears. I do not need or want of two lists of favorites, and I prefer to use one on the right that shows only when I click it. The news is empty (no registered bookmarks), but this empty column takes place, I don't want not wasted!

  {Ctrl + B} opens and closes the bookmarks bar.

• How can I get the TestStand splash screen to not show up when I call the results treatment Utility offline?

  So I call the Offline processing Utility (ORPU) a not executable call results in a plugin to perform a personalised treatment in another configuration.  Everything works fine, including having run reduced (mostly hidden) by using the option/tray.  When he called, the TestStand splash screen appears (certainly is not a show-stopper but it's confusing from the point of view of the user).

  Is it possible that I can get this start screen to not appear when calling the ORPU?  I noticed in the help, mention is made of the use of the callback file, and I wonder if someone has successfully used this to avoid the dialog box or other behaviors.  I would like more info on how it works, but it doesn't seem to be a vast detail on this in the help, and I'm not also find me useful examples.

  The source of the Offline utility treatment results is included with TestStand and can be changed.

  The ORPU source is located under "Components\Models\TestStandModels\Offline utility treatment results"

  From the source, you can see that there is no flag that allows you to hide the splash screen (except for / I leave, but that it will also close the ORPU!); However, you can easily change the ORPU so it does not show the start screen by removing the following lines in \Components\Models\TestStandModels\Offline Results Processing Utility\OfflineResultsProcessingUtility\MainForm.cs

  If (! data.) Quit smoking)
  splashScreenForm = new SplashScreen (mEngine, false);

  Regarding the flags without papers, there are not really many flags undocumented in the ORPU (even once, you can see them in the source), and undocumented flags have very specific use cases (open files from shell and NEITHER internal regression tests).

  A (non-official) complete list of indicators ORPU from 2014 TS:

  /?
  Shows help

  / tray
  Starts the ORPU in the status bar

  / exit-when-done
  Exits when all files are made

  / I'm leaving
  Leave immediately

  /process - files - Missing - Data
  Treats the files even if they lack of data

  / which-process-files-Missing-Data
  Do not process files that are missing data, show only a mistake (it is the default behavior).

  / Process-All-Profiles
  Start all profiles

  / Process-No.-Profiles
  Don't start any profile

  / Process-Profiles
  Treat the profiles specified in the following arguments

  / process-files
  Add the files specified for the specified profile

  / log - level

  Sets the logging level for the newspaper ORPU, all of the messages above, the specified log level is saved.

  /ShellOpen
  It is an internal indicator, it is used to treat applications for the shell (for example, after a double click on a tsr in Windows Explorer). Do not use this indicator.

  / non-interactive
  It is an internal indicator used for the test. Do not use this indicator.

  Please note that NEITHER does not support appellant flags undocumented and that NEITHER is not guaranteeing backward compatibility of these flags undocumented and they could change at any time, without warning.

  For a more detailed explanation of the working of each option, refer to the Arguments of the command line Utility using TestStand treatment results offline.

  Hope this helps,

  Francisco

• Page tiles showing not when you use Adobe Muse and webmarketing accommodation

  Hello

  I created a muse site that has good page titles display in the browser when you use the bases web hosting. But I need the same site contains a blog now so changed hosting to web marketing, this has as consequence the pages not showing their page titles in the browser

  Does anyone know why this is, or what I can do about it?

  Thanks for any info

  concerning

  Martin

  The page title does not change with the change of site map, unless it is done manually, or if it is updated the file is downloaded from Muse.

  Please check the titles added to the page if they exist or not, there is always the same question, enter the url of the site.

  Thank you

  Sanjit

• How can I display my contacts list to select a recepiant when you answer, the composition or the mail transfer?

  When I want to transfer or to respond to several contacts, I can't see the list of contacts. I'm sure it's a simple problem to solve, but I could use some advice on how to do... Thank you!

  When you're in an entry window, press F9. F9 Active / disable the sidebar of contact power on and off.

• When you call sub-panels in an exe file, some to run correctly and some don't work at all.

  Hello

  I use LabVIEW 2009 and display various screws in a secondary (one at a time) into an executable.  A few screws properly load and run, while others do not work.  All the screws called VI properties are the same.  When I run into the development system, the code runs successfully.  I don't get any errors during the call to the screw - screw display all their facades like they should, but only a few actually deliver, while others do nothing.  Any ideas would be very appreciated!

  Thank you

  Jason

  Are you running VI separately, or you use the method run a VI?

  If you use the method run a VI, check out error and see if you get an error.

  If you are running separately, make sure that this area of the code actually runs (from your description, it looks that BT is).

  If all screws are supposed to be in the app, I would say that, given the static references for them and having a node property to one of the controls in each VI you want to display in the secondary, which will ensure the that LV will not remove its FP when you build the exe. Looks like this is your case, since you say that you see the FPS.

  If the screws are not in the application (that is, you run live recorded separately), you will need to ensure that they have all the dependencies that they need, because it is possible that they you are missing the vi.lib screws or your own screws not built in the app (since there was no static reference to them). The easiest thing is to build a distribution for each other while giving it a name space. You can do this by using the OpenG constructor, although I've never needed to. The main problem with this is that it will explode the size of the code, because each VI will need a copy of the common stuff.

• Is Windows Live Photo Gallery PUBLIC or PRIVATE when you use?

  Hi, I hope you can help me please... Windows Live Photos LIVE allowing the public to see all your photos or is it private until you do public iy? IM really confused... I WLPG and recently I wanted to download to another computer and it put other peoples photos in my Gallery... which I did, can you please tell me? I don't want my public photos, I just need to use it as an editot and organize, thank you very much!

  Hi, I hope you can help me please... Windows Live Photos LIVE allowing the public to see all your photos or is it private until you do public iy? IM really confused... I WLPG and recently I wanted to download to another computer and it put other peoples photos in my Gallery... which I did, can you please tell me? I don't want my public photos, I just need to use it as an editot and organize, thank you very much!

  It is private until you want to not to share with others, but if you want to share with others or to the general public you can easily do so. You must sign in with your Windows Live id ID to share your photos in SkyDrive, Flickr, Facebook and YouTube.

• Recipes don't get renewed when you restorePurchases()

  Hello

  I noticed that when you haven a R29 construction and you have the option selected "let the library/store manage the law."

  revenues not be renewed when you perform a restorePurchases().

  The GET added to the current list and you must close the application, remove the memory and open again to see that these recipes have you right through iTunes.

  Can anyone confirm?

  Concerning

  Mario

  You must work with your contact Adobe then to get help on this through our developer support/Gold support channels. That is... talk to Klaasjan

  Neil

• Black boxes shows images when you set the size of the image?

  Hello

  I have problems with black boxes appear in the image when you set the size. Please look at the screenshots. If his clue, all the problems started after I ran the El Captain update last week. What can I do? Everything works perfectly on my retina new Macbook Pro.

  

  Hi henrike43022551.

  Greetings.

  • This phenomenon occurs with all the files.
  • Also try this
    • Open PS, preferences - performance and uncheck CPU chart use
  • Restart PS and check again.

  ~ Rohit