Recipes don't get renewed when you restorePurchases()

Similar Questions

• RH9 files don't get renamed when you rename the project

  I need to change the names of a few projects. I went to file > rename projectand changed one of their names. I chose the new name to display in the header and said Robohelp to create a new directory with the new name.

  As I'm looking in the project, I noticed that the default Index names and the table of contents by default have not changed.

  Where can I change these?

  I had to think about it for a minute because Peter does not specifically indicate I have to right click. I didn't do it in Windows Explorer to the file level, which was what I assumed he meant. I found it, for all those who come along later. You go to the project manager and expand the Index folder, then right-click on the name of the default Index file. Even with the table of contents.

  Thank you, Peter.

• get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  This forum is for Microsoft Security Essentials.

  You question is with Oracle Java.

  It is recommended to go to www.oracle.com to get help.

• Getting disconnected when you add an interface VLAN

  Hello

  I am trying to configure a switch SF302-08MP in a test environment with a couple of VLAN. A default state, I configured the device to be in mode L3, added a VLAN and then added an IP interface to this VLAN. The problem I have is that as soon as I add the IP interface for the VLAN I create I lose connection to the switch immediately and either have to reconfigure the interface through the CLI or restart the device to lose my changes.

  I realize, I can configure the box through the CLI to find my connection and complete the configuration of my VLAN, but I'm trying to get off a good process to configure it through the web interface (outside the facility in L3 initial mode of course).

  For that, I connect to the IP address by default on the VLAN 1 (192.168.1.254). The measures taken include:

  1. access the CLI interface and set the mode of L3

  2 reset

  3. access to the switch via a web browser on 192.168.1.254 and login

  4. Add VLAN 2 (management of VLANS / create a VLAN)

  5. Add the Interface IP (IP Configuration / Interface IPv4, selecting VLAN2 when you complete the add interface of dialogue)

  6 lose the connection to 192.168.1.254 when you click on apply

  I did this on other switches in the 300 series in the past in the same way without problem, but for some reason, that this switch 8 ports gives me problems.

  Any advice would be much appreciated.

  Thank you.

  Hello Craig,.

  On the 300 series switches, when you add the first IP interface it will remove the interface "generic / by default. Of course, this will remove your access as you saw.

  Simple around this problem is first of all create a new interface for the vlan 1. You can set this in the 192.168.1.254 or together for what you plan to use.

  Once done, you should now be able to create interfaces for other VLANs without problem.

• I don't get sound when connecting my LED TV to my laptop under windows 8

  Hello

  I have a laptop HP with windows 8. When I try to connect it to my LED tv using a HDMI cable I get the picture but the sound comes from the laptop only, not LED TV. I don't know the reasons. If anyone can help get the sound on my LED TV.

  Thank you

  Hi Ram,

  I understand that when you connect to LED TV to your Windows 8 HP laptop using an HDMI cable, you get the picture on the LED screen but sound comes only from the laptop. There is no sound in LED.

  This problem can be caused if the digital audio HDMI is disabled. Please follow the provided steps and check to see if that solves the problem:

  Method 1: Activate digital audio HDMI:

  Follow these steps to enable digital audio HDMI:

  (a) the speaker icon on the right side of the taskbar on the right click desktop background.

  (b) click on playback devices

  (c) right click Digital HDMI audio and then click Activate.

  (d) put a check mark: Show disconnected devices and see the disabled devices.

  (e) check if you get audio on the led connected to the laptop via a HDMI cable.

  Method 2: Check if the cables are connected properly:

  See the section under step 2 HDMI cables in the following link:

  No sound in Windows:

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab2&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope, it helps to solve the problem, if you have any other questions relating to Windows 8, do not hesitate to post.

  Kind regards

• Windows 7 - get error when you try to install the updates, code 66A

  I have error when I try to install update!  Code 66A. What should I do?

  
  

  * original title - I have error when I try to install update! Code 66A. What should I do? *

  Framework of 66A
  http://social.answers.Microsoft.com/forums/en/vistawu/thread/52538332-710e-4C29-BD5B-d08db7555bb3

  Step 1

  You can follow the steps below and check if it helps solve the problem of update installation.

  (a) click Start and click on Control Panel.

  (b) go to programs and features.

  (c) scroll down to Microsoft.Net Framework 4 Client Profile, do a right click.

  (d) it will give you a choice of uninstall/change, click it.

  (e) then it will give a choice to repair, choose repair. It will take 4 to 10 minutes to fix and may vary.

  (f) one when you're done, go to your update and Update Center again.

  Step 2

  If the steps above do not help, access the link below and follow the steps described in the article and try to uninstall all versions of the .NET Framework on the computer and reinstall all the versions of the .NET Framework on the computer.http://support.microsoft.com/kb/923100

  Check this reminder in the well: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f1dd866f-85b7-4ae6-bc32-1c488c19742a
  Diana D. (Microsoft Support) credit releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Cannot get signal when you connect the TV to HDMI port.

  * Original title: HDMI Signal

  Hello. My nam is Kieu. I have a problem and and we hope you guys can helo me. I just bought a Gateway desktop all-in-one computer and tried to connect it to the TV via the HDMI port, but I could not get signal on my TV. Help, please.
  Thank you very much

  Hi David,

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that you are unable to get the signal when you connect the TV to HDMI port.

  I will certainly help you with this issue.

  Here are some steps that you can try in order to solve the problem.

  Step 1. First you need a video cable to make the physical connection. For a better image quality, you need to connect the computer to the TV using standard VGA ports or via DVI to HDMI Cable provided your TV supports these ports.

  Step 2. Open thedisplay settings' ' in your Vista computer and Activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  Step 3 Pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  For more information, see the article.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  If anything in my post is not clear or if you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.

• Add a printer on a vista laptop on. Canon pixma ip3600 Office xp wireless worked until the laptop stops. now get error when you try to connect to it.

  computer Vista laptop does not connect to destop printer

  Add a printer on a computer laptop port local \\computer\printer) on the computer vista laptop. (for xp wireless canon pixma ip3600 Office worked until computer laptop shutdown. now get error when trying to connect.) How to install printer permanent on laptop?

  Hello

  1. What is the exact error message you get?

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It will be useful.

• Kept getting error when you try to connect to Windows Live Mail

  When I sign in windows live mail, I get this message... There was an error when you attempt to connect to the Windows Live Calendar service. If the error persists, check if there is an upgrade of Windows Live Mail available or communicate with the service. When I try to add an event or a calendar on windows live mail, it won't sync my hotmail calendar. Can someone tell me how to solve this problem.

  I had this happen to me last week and never knew why. What also happened in my region of the Eastern United States, is that I could not get into these forums either. It might be possible that Microsoft is the maintenance or upgrading their servers in your area. My problems resolved themselves after 10-12 hours or more and it led me to the 'edge of madness' trying to solve this problem, while it was happening.

• I have problem getting m when you run Internet Explorer, Google Chrome and Firefox are... "Internet Explorer has stopped working", "Google chrome stopped working.

  Please someone help me with this problem, I m waiting for a solution

  The details are mention below...

  Google Chrome
  Signature of the problem:
  Problem event name: BEX
  Application name: chrome.exe
  Application version: 22.0.1229.79
  Application timestamp: 50616671
  Fault Module name: unknown
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 648f0d73
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 16393

  Internet Explorer

  Signature of the problem:
  Problem event name: BEX
  Application name: iexplore.exe
  Application version: 9.0.8112.16450
  Application timestamp: 503723f6
  Fault Module name: StackHash_d893
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception offset: 28890d 73
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 16393
  Additional information 1: d893
  More information 2: d893a36d76397fffb4086425a4f50b4c
  3 more information: c19f
  Additional information 4: c19f8f2799f6319e5b5618be5bfccaea

  Thank you...

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

  -

  I hope this helps. Good luck.

• I get garbage when you click on "View Page Source" of maff backup files.

  Hello
  Saved files mhtml and html, the HTML etc code view when selecting "View Page Source".
  Since the installation of the add-on Firefox to save web pages in the form of maff files, when you click on "View Page Source" it displays garbage.
  Is it possible to view the original source of a maff file saved?

  A MAFF file is a ZIP archive, so you should have extract the files in an Archive Manager, if you do not use an extension to handle this type of file.

• Could not open key: HKEY_Local_Machine32\software\microsoft I get this when you try to uninstall programs... can not uninstall anything - sometimes it starts with an error message 1402, but always the same can not uninstall anything

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi kmurf32,

  (a) what programs you try to uninstall?

  (b) what is you receive the exact error message?

  (c) are that you can install updates for Windows and other programs without any problem?

  To better understand the question, please provide more details about the problem you are having, we will try to help you solve the problem.

  If you are unable to install a program, you can follow the steps to uninstall from the computer.

  Step 1: use the Windows Installer Cleanup utility for delete all entries (uninstall program) that are associated with the product that you're having trouble:

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PhotoshopCS1:Image gets ruined when you drag down the screen

  

  Only happens when you drag on the underside of the screen, and only when the layers tools, etc. are present.

  I'm using Photoshop CS (ver.8?) on Windows 7 32 bit.

  Problem still not fixed after reinstallation. Never had this problem on Vista

  Hello. Abandonment say that I found a solution. It turns out that the Aero desktop theme is causing the glitch. Photoshop works ok now after passing to a different desktop theme

• Always get errors when you try to activate Windows 2008 Standard Server (0xC004C003 error Code)

  I upgraded my server from Windows 2000 to Windows 2008. Initially when I try to activate I get the error:

  Activation error: Code 0x8007232b
  DNS name does not exist
  So find kbase ID of Article: 929826
  http://support.Microsoft.com/kb/929826
   
  Tried to load my product key again from the command prompt:
  slmgr - ipk
   
  Now I get error:
  0xC004C003 error code
   
  the activation server determined that the specified product key is in use

  I went through all the information on product activation, sought help windows, answers, google, still cannot find how to solve this problem.

  Made through the Windows Server 2008 Product Activation helps too.

  I don't want to go beyond the 90 days for activation and started having problems with my Windows Server!

  Please repost your request in the most appropriate Forums of Windowsserver.  Thank you.

• Get 0 when you select a column of number (9)

  I have a really weird problem with a third-party web service that uses a connection to ODBC for Oracle 10.2.0.3.0. I wrote a .NET client which generates the same SQL as the web service so that I can know what is happening. The web service is hosted by IIS 6 located in x 64 mode so we use the x 64 Oracle client.
  
  The version of the oracle client is 10.2.0.1.0.
  
  I have a table that looks like this (I deleted some columns and names):
  
  SQL > describe tablename;
  Name Null? Type
  KOD VARCHAR2 (30)
  ORDNING NUMBER (5)
  AVGIFT NUMBER (9)
  
  
  I then in SQL * more published the following statement:
  
  SELECT KOD kod, AVGIFT as riskPoang
  TABLENAME where upper (KODTYP) = 'OBJLIVSV_RISKVERKSAMTYP' ORDER BY ORDNING
  And I get the following result:
  
  KOD RISKPOANG
  OSH risk 55
  Maria risk 35
  Lag risk 15
  Mycket lag risk 5
  
  
  But when I run the exact same SQL using the DSN even on the same machine I get this:
  
  Values
  Kod: OSH risk Riskpoang: 0
  Kod: Maria risk Riskpoang: 0
  Kod: Lag may Riskpoang: 0
  Kod: Risk of lag Mycket Riskpoang: 0
  
  
  If I first get the number to varchar and then come back in number, like this:
  
  SELECT KOD as kod, to_number (to_char (AVGIFT, ' 99'), '9999999999') as riskPoang
  TABLENAME where upper (KODTYP) = 'OBJLIVSV_RISKVERKSAMTYP' ORDER BY ORDNING
  I get the correct result:
  
  Values
  Kod: OSH risk Riskpoang: 55
  Kod: Maria risk Riskpoang: 35
  Kod: Lag may Riskpoang: 15
  Kod: Risk of lag Mycket Riskpoang: 5
  
  
  All the world knows this? It's incredibly annoying and I am completely stuck and don't know what to do next. We have a web service of third parties that use these tables so I have to get the original SQL statement to work since I can't change the code.
  
  And pointers are greatly appreciated! :-)
  
  Best regards, carpet

  The following note on My Oracle Support should help:
  Note 944863.1 ODBC SELECT number Type returns 0 on Windows 64-bit

  The short answer is: it's a bug, patch the client to 102040, what you are doing by applying the patch 10204 database to the client.

  See you soon,.
  Greg