Z400: Z400: what is the screw which sets the framework for the case?

Similar Questions

• How to set a framework for a duration specified ("how-to")

  Another question "How - to".

  How set a clip in a video of a specific length?

  Do I have to do is have 4 successive clips with text, each the same length (say 4 seconds).

  Using 'Titles & text' I select "Default Text" (general) and that dragged down to my calendar - 4 times.  In fact in the 2 video as this text is to overlay the main video - in this particular case, a map of the State of Washington.  Each clip "Default Text" is to display the name of each volcano (fading in & out name I had to work through the right-mouse-button, Fade In Video & Fade Out Video - only problem is you can't see what fade options if one is active).

  Can I change the length of each text element by dragging the slider, but it is rather random.  How can I set the time to an exact number of seconds (or frames)?

  HEM

  HEM

  Thanks for the reply. Glad you did what you wanted. How did you that if my personalized answer has not worked for you?

  What I described working for the details you provided.

  Change the duration of 4 clips moved to the chronology of titles & text so that the duration of each was 4 seconds instead of each having the same default of the project during still image. the default value of the project.

  If what I wrote did not work for you, my impression is that you have not said or didn't know that all 4 clips do not have the same duration to start with. Which shouldn't be the case if you just dragged the 4 default of securities and the text to the timeline. Everyone should have the same default value still life image.

  

  What I described works as described for what you described, that is, all four clip selection, change duration of Time Stretch

  I have the first elements 13/13.1 on Windows 7 64 bit. The above attempts to recreate what you call your situation.

  Note the text selected on the video 2 track titles (each duration 5 seconds in my case), video clips under the video 1 track, and the length of Time Stretch set to 4 seconds in the Time Stretch dialog box.

  Please review and consider.

  Thank you.

  RTA

• How to set a framework for model A as the backdrop of model B, when A is shorter than B?

  I have a composition of 3 seconds, within another composition of a few minutes. It ends with a frame without movement. I can't extend its length after the last image, what I want to do, I can use it as a backdrop for the composition more than time. The only solution I can find is to extend the duration of the scale model of the opening, and that seems redundant.

  COMP A completed, it disappears, I can't extend its length in scenario B COMP beyond the total length of COMP.

  I could also export the alembic and re - import, but I don't want to do that.

  The average time-remapping or duplication CompA (washing at the end framework) > right click > time > Freeze Frame - and the cup double to adapt to the necessary remaining length

• What is the case with the 33rd host in the cluster?

  Hi all

  The limit for a DRS or a HA cluster is 32 ESX servers. What happens if you try to add a 33rd host?

  Well, I got up to 36 hosts in the same cluster and I haven't noticed any errors. Work of VMotion, DRS...

  ESX3.5 U2 and Virtual center 2.5 U3

  Best regards.

  Yes, as David said, there is a limit that has been tested by VMware, so it's a MAX supported.  Nothing will stop you from adding other nodes to a cluster, and it can work very well. But if something happens, you might reduce the node by number of clusters down a limit of support.

  On a side note, may I ask why you would have many hosts by cluster rather than simply create more clusters with a smaller amount of hosts?

• What is the case fan just to get to a m9426f

  I need a case for hp m9426f fan it says it's a foxconn model PV902512Lwhere can get me a

  Thank you

  I ordered this one low Gelid Silent FN - PX09 - 20 9 92mm TC temperature controlled case fan silent 38CFM 11 ~ 23dBA

• Java manually setting is necessary in the case of cloning in r12 on the new server.

  Hi experts,

  I need some suggestion. I demanded to clone my database of production on a completely new test server. for this, I know that I demanded to prepare the new test server for ebs r12. for exp rpm installation package, the core of installation parameters create group users and os etc...

  My confusion is that ' forced to install java manually when you copy the database on an entirely new test server (1st time on this server direct cloning) "

  According to my java knowledge already bundle with r12 and request not to install manually when we install r12 1st time on a new server. But what in the case of cloning.

  Please please suggest me right path. I have to do the cloning so client-side I m nervous. Please help me...

  Pritesh salvation,

  It's just a matter of preparing the server, with all prerequisites them and perform cloning immediately. You should not install java separately when you make a clone on a new server.

  Thank you &

  Best regards

• Which tool is best for ETL?

  I want to transfer the RLDB to Essbase data, there are many tools and method, I don't know which tool is best for my case. Now, what I do now is:
  1 create views in Oracle
  2. export to the falt file view
  3. import flat file for Essbase using the script rule import files and MaxL.
  4. the data size: lines of file flat 3 million, time used: 13 hours
  ---------------------------------
  I want to use more powerful ETL tools, such as: Informatica PowerCenter, OBIEE, FDM, EIS,..., I have knowledge base for the tools above, but do not know which tool is best for my case? Please advise?

  If you want to choose a product that will be the test of the future and integrate following Hyperion then I'd look to an Oracle tool like ODI/OWB (these two products will merge with time). If the transformation that you need to achieve is simple then you can not even an ETL tool.
  I see OBIEE as more of a reporting tool and do not really consider it to be in the region of the ETL.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• HP Z400s under spec for HD in CS4 edition. What is the best way to go?

  Hi all

  I recently bought the three HP Z400 workstations for editing XDCAM EX 1080i (HQ) a timeline in Premiere CS4. It's a very hasty and ill-informed purchase. Unfortunately I only came across the Adobe forum after that I ran into trouble with 1 and 2 workstations. After reading a lot of useful messages, it is quite obvious that new two of my machines have the ability to edit full HD 1080i chronologies stably.

  Before I describe my problems, I'll describe my system specs:

  Z400 1 workstation

  Windows XP 32-bit
  Xeon W3505
  3 GB RAM
  GPU: Quadro FX 1800
  C: 500 GB OS/programs
  D: 2 x 500 GB Raid 0 zero

  Z400 Workstation 2

  Windows XP 32-bit
  Xeon W3520
  3 GB RAM
  GPU: Quadro FX 3800
  C: 500 GB OS/programs
  D: 2 x 500 GB Raid 0 zero

  Z400 Workstation 3 (this machine works well and has not had stability problems)

  Windows Vista 64-bit
  Xeon W3540
  8 GB RAM
  GPU: Quadro FX 3800
  C: 500 GB OS/programs
  D: 2 x 500 GB Raid 0 zero

  While I was able to edit clips XDCAM EX 1080i HQ on all these systems, work stations 1 and 2 are very unstable, crashing regularly, especially when rendered.

  I'm a bit of a luddite when it comes to technology, so after reading through the many excellent posts here, I'm still not entirely sure which is the best way forward for me to put jobs 1 and 2 to the height. It is clear on reading these posts that I more capitalized on GPU cards, underestimated the importance of the RAM and committed a fundamental error of my choice of operating system:

  • In the spirit of the community - are the specs for Workstation 3 enough for stable HD editing?
  • What is the best solution with 1 and 2 workstations? Reader threads I guess I upgraded Vista 64 bit OS and spend at least 6 GB of RAM - it would be enough? If this is not the case, what do you suggest? In addition, the existing processors (w3505 and w3520) are quite fleshy for work?
  • And this could take liberties... all topics widely discussed on this forum; I'm having trouble getting my head around storage. What is the best configuration that I do with my current gear (z400 motherboard) for HD editing (including adding additional disks)?

  Thanks in advance... I'm not much of a techie, so all the words of wisdom are like gold dust.

  See you soon,.

  James

  Your CPU 3505 is only a dual core chip.  Certainly working on upgrading the CPU on a quad core.  I don't know if HP offers capabilities overclocking on this motherboard single processor.  If so, you could try prejudice overclocking guide lines since it is structurally almost identical to the i7-920.

  To the power of the processor which is the most important point for the creation, you can use one of these processors W3520 / W3540 / W3570 (2.66 to 3.20 GHz, 8 MB L2 cache) If you prefer do not overclock or if HP didn't you provided the functionality in the BIOS.

  Certainly wait (I think that it is the date) October 22 to Win 7 64 bit OS it is certainly faster than Vista 64.

  Incidentally, I don't know if you have ordered these units, but it may be useful to call HP and see if you are eligible for a free upgrade to Win 7.

• What is the best setting for H264 Blu Ray bit rate, which will play OK on most / all blu ray players.

  What is the best setting for H264 Blu Ray bit rate, which will play OK on most / all blu ray players. When you use CBR and VBR. What are the benefits of progressive and interlaced with regard to playback on all players.

  You don't need to worry about compatibility with Blu - ray playback.

  I prefer a variable bitrate for its effectiveness.  (Not necessary spending 25 MB on a framework in need of 10 right?)

  Using interlaced or progressive will depend on what you shot.  (Take note that 30 p is an atypical, so do not pull that.  Pull only 720 p/24, 720 p/60, 1080 p/24 or 1080i/30).

• What is the latest version of Firefox which can run unsigned module?

  I downloaded the latest version of the installer of Firefox offline and it will not run an add-on unsigned vital. I have an older version of Firefox (42.0) who execute him. What is the latest version of Firefox without verifying signature of the add-on? Thank you.

  42 of Firefox is the latest version of Firefox which has been made public. If you run a generation later, it's probably either every night, beta or Dev edition. If you have an add-on unsigned, you run in these editions, you can disable the requirement by setting xpinstall.signatures.required to false in: config.

• What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were delete

  What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were deleted songs?  I always manually move files to prevent this.  I'm on Windows 10.

  Has no way to know that...

  If your library iTunes music fits on the storage space of 160 GB of your iPod classic, you just set to automatically sync your entire library of music.  Then, it won't matter which has been removed and which do not get deleted, because your iPod music library is the same as your library iTunes music.  And iTunes it keeps this way, every time your iPod connection (or click sync , if already connected).

  If you don't want "everything" in your iTunes library on your iPod (understandable), you can create a playlist in your iTunes library with all the songs you want on the iPod.  Then, set to automatically synchronize the playlist to iPod.  Instead of manually managing iPod, you manually manage playlist in your iTunes library.  The iPod has no need to be connected.  The next time you connect the iPod (or click sync , if already connected), iTunes will update the iPod with the same changes.  The big advantage is, if something happens like what you describe, or needs to restore iPod (erased) or even if break you your iPod (and get a new), need you a few mouse clicks to solve the problem.  Just set it up to sync the same playlist once again, which exists in your library iTunes (not only on the iPod).

  You can post back for more information about how to use automatic synchronization to do what you want more easily, go ahead.

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• What is the function of the IOS minimum set required for VPN site-to-site software?

  Hi guys,.

  I have a Cisco 1841 router to do a VPN site-to site. I would like to know what is the function of the IOS minimum set required for VPN site-to-site software?

  Thanks in advance.

  Hi Ja,

  Advanced security or more should do it. The version of the IOS, you can try later 12.4 T which is c1841-advsecurityk9 - mz.124 - 24.T5.bin, in which case you don't want to go to 15.1 still.

  I hope this helps.

  Raga

• DPS: Judge to use the parameter Raster or vector in the States of the objects when the majority of the page is a photo. What is the best setting for the overall performance?

  I am trying to decide whether to use the parameter Raster or vector in the States of the object when the majority of the screen is a picture (with a modest but important legend for children to read). The legend certainly makes it look more net as vector. But does the photo! The raster setting seems to make the lower-res images in comparison. In my first edition of my application, I thought that raster would be the best setting when the photo was the subject dominating the page. But now, after seeing how strong he looks like vector, (but with almost a refresh of the unacceptable time. Perhaps better on the latest iPad. Most of my readers/students in class will use iPad 2 s, which has a slower processor). I wonder if I should go through the trouble of changing States of photo objects that have the type as well to the vector. It doesn't seem to be as sensitive to a re - draw on the iPad 2 (non-retine)

  Is Filesize hit if I make about 1200 on these objects range from Raster to vector? (It is a huge, highly interactive history book, so I'm curious if acutally go to vector on these photos would reduce the size of the file) What is the best setting for the overall performance?

  I see the freeks screen outside for a bit if you try to pinch and zoom in a vector object (photo) vs raster. Which is disappointing. Does slow down load time/refreshment in frame, which is a little less. I also found that the drop shadows really bad that redraws effect in vector, almost vibrating in a slide show, for example. Thus, in cases where I need shadows, I'm sticking with Raster.

  All tips go ahead?

  Brian

  Does that help? http://boblevine.us/Digital-Publishing-Suite-101-keep-text-sharp-in-raster-slideshows/

• When you save a file to the [.jpg] format, I wonder to choose a quality from 1 to 100. What are the changes in the created file based on the selected quality setting?

  When you save a file to the [.jpg] format, I wonder to choose a quality from 1 to 100. What are the changes in the created file based on the selected quality setting? I would like to know what changes, so in the future, I can set my camera to one who will give me the highest quality in a first time, which allows me to make cultures and always preserve the quality.

  Thank you

  Dovid

  Thank you twenty-one... your answer of common sense to me.

  so, in short, can I assume down the chosen quality over compression algorithm?