Z510 i5 dvd rw noise

Similar Questions

• Satellite A300-1 M 1 - skates from CD/DVD, makes noise but does not read the CD

  I own a laptop Satellite A300 - 1 M 1

  He reads some DVD, windows media player or VLC, but fails to read CDs and many DVDs

  The drive is recognized in Windows Vista. I updated the drives and rebooted. Then removed from devide Manager and rebooted. The removal of the UpperFilters and LowerFilters registry and restarted it again.

  The problem is it exactly even. I can read a DVD (DVD movie) but not a CD (with data). I can read both disks on a different laptop.
  When I insert the DVD, the disc spins and in few seconds it appears in windows Explorer and can be played with Windows Media Player or VLC, for example. When I insert a CD with the data, CD towers, there is slippage noises, at different speeds. The mouse cursor changes briefly shhowing a disc below it, the orange light flashes, but after some 40 seconds or so only a message appears "Please insert a readable disc. Needless to say, I tried several different CD. Only DVD movie I managed to read on the player.

  The drive is listed on the device as a Manager:
  HL-DT-ST DVDRAM GSA - T50N

  The CMN Satellite A300 - 1 M 1 are:
  Intel CoreDuo P8400 2.26 GHz
  4 GB OF RAM
  I'm using Windows Vista (as it was installed on this laptop)

  What can I do to fix this?

  Hello

  I think that there is not much to buddy
  I think that it s a CD/DVD drive problem
  There might be something wrong with the lens of laser disk or disks are not totally compatible

  You could try burning the disks on another computer and could attempt to read copied discs

  Otherwise you will need a new CD/DVD drive

• DVD making noise every 10 minutes

  Hi, my laptop is 2235TX Pavilion G6. Windows 8. I would like to ask the expert about the State of my laptop. The DVD rom keep making noise every 10-15 minutes. Sound as dvd restarts. What is normal or if not, is there any solution for this?

  Yes, it's the double post

• Acer TimelineU M5 - 481 T - 6642 Ultrabook of 14 inches. CD/DVD tray when it starts up and stop noise?

  I recently bought an Acer TimelineU M5 - 481 T-6642 14 inch Ultrabook.  During startup and shutdown, there is the CD/DVD tray noise as if the status bar is trying to open. I did not a CD or a DVD in the tray again.  How can I stop this sound action, annoying in my new ultrabook?  Thank you.

  Mine makes no noise noticeable at startup or another so I would get the extract.

• Satellite U505-S2970 survey "Crunchy" CD/DVD

  Hello
  I just bought a Satellite U505-S2970 14.1 "laptop with Windows 7 Best Buy." Fact loaded slot CD/DVD drive noise terrible cracking during loading, but it seems to play ok, but I didn't one day again. When I put my first DVD, all of us around the table saying, "What was that?" The floor BB model didn't make a sound at all. Should I be worried? The fuss made one want to cringe. When I put my first DVD, all of us around the table saying, "What was that?"

  Thank you

  Hi mate

  Hmm. not easy to say if it could be a hardware problem
  If the CD/DVD drive is able to manage the media inserted, then the material should be ok
  You could try to look at this problem computer laptop for several days, and if you could not observe any improvement or if the sound is louder then, you should ask a notification service technician

  Good luck buddy

• Satellite L750/755 - DVD player emits a sound without any DVD inside

  Hello, I have a question
  It's normal DVD player emits a sound without any DVD inside?

  I'm the ear every time the sound

  It might be interesting for you guys:
  http://forums.Toshiba.com/T5/computer-troubleshooting/L7555-satellite-CD-DVD-drive-noise/TD-p/236844/page/2

  It seems that "Toshiba PC Health Monitor" is the reason for this strange noise rattling.

  Disable the "Toshiba PC Health Monitor" in the msconfig Startup tab.
  Uncheck the mark that appears near the PC health monitor and reboot the laptop.

  That should help!

• W500 4061, cannot change password, noise AC adapter

  Hello, everyone.

  I am can not change the password for ME WOOD. The "admin" password is accepted, but reports 'ERROR' as intrel change password rejected. Can someone give me some light on it

  I have an Intel management Aegina BIOS extension version v4.04.0006 and Intel ME fireware version 4.0.3.1124.

  BTW, can someone tell me how do not change at the start of the DVD, the brand of DVD some noise when start and according to me, that's not healthy for her.

  The power adapter were also low noise frenqency, something in common?

  I had the same expirence with Intel ME password. You must choose a password that is sophisticated like me! Admin! 00 with uppercase and lowercase and special characters

• Qosmio X 870 - ODD address every 10 minutes

  I use the Qosmio X 870 for 2 days now. What really gets angry: every 10 minutes exactly the reader makes a noise - as if he pick up a CD or set the playhead.

  It could be a defect or do I have the opportunity of this cut in the settings?

  Thanks a lot for your help!

  Hello

  I found two threads on a similar question:
  In this thread the new Windows 8 installation solved this problem:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=69468

  and it could also be interesting for you:
  http://forums.Toshiba.com/T5/computer-troubleshooting/L7555-satellite-CD-DVD-drive-noise/TD-p/236844/page/2

  It seems that "Toshiba PC Health Monitor" is the reason for this strange noise rattling.

  Disable the "Toshiba PC Health Monitor" in the msconfig Startup tab.
  Uncheck the mark that appears near the PC health monitor and reboot the laptop.

• Satellite A300D - 156 BIOS update failed - I need assistance with recovery

  Hello

  I know it is old enough, but until now, it was just good enough for my use.
  In any case, after I did a restore of the Windows Vista operating system came with my computer, I got a notification of one of the tools of Toshiba that an updated BIOS is available for my computer.
  I downloaded and tried to perform an update. After that the process had finished (probably), the computer has not responded to the pad touchscreen and keyboard. I was not sure if the update really took place, especially because it looked like the computer has been is frozen. So I left it for the next +/-30 minutes, but no change.
  So I decided to reset it as even the power button did not work. So I had to remove the battery and unplug the AC power.

  ... and the computer has (almost) dead then.

  Now, it is that when I press the power button it seems to power up but the screen remains blank, fan works and Windows is not booting. It's just a short scratching sound of the DVD drive noise, and that's all.

  My question is, what is the recovery procedure in my situation? I tried to look for potential assistance on the Internet and I found a few forum or articles messages indicating that there is some recovery for the different BIOS procedures, but what is the procedure for my BIOS? The only thing I found the 'work' was that if I press the power button now the keys Fn + Esc, computer laptop powers on with power button / stop flashes. But how to force recovery BIOS flashing procedure?

  Thanks in advance for any help!

  It's really stupid situation now. You will not be able to fix it with a simple recovery operation. BIOS is broken.
  In the past I have faced no such situation but on this forum I found a very interesting thread on BIOS recovery. Please take some time and visit this thread.

  Maybe this will help you with your machine.

• Satellite P50T-A0EE - disc drive beep

  On startup and after start of disk drive beeps twice and always beeps after that. This has happened since I bought this laptop 6 weeks ago.

  The current laptop is a replacement of a unit that was doing the same thing.
  I rang Toshiba reclassification this and they can't tell me how to solve this problem.

  Hello

  Do you hear the sound of the beep or maybe a nattering?
  You insert a disc until the noise appeared?
  Appear with or without disc?

  I found a similar subject interesting thread:

  http://forums.Toshiba.com/T5/computer-troubleshooting/L7555-satellite-CD-DVD-drive-noise/TD-p/236844/page/2

  In this case "Toshiba PC Health Monitor" is the reason for the strange rattling noise.
  Disable the "Toshiba PC Health Monitor" in the msconfig Startup tab.
  Uncheck the mark that appears near the PC health monitor and reboot the laptop.

  Your much appreciated comments

• Its strange reading problem

  I have compiled a DVD in Premiere Pro CS4 using multiple video and audio tracks.  I exported this manufacturer of media via a .m2v and .wav file, that I then put in again using "import calendar" after having selected two of them and produced a DVD.  This DVD play back well on several different PC, with different DVD SW and most DVD players... BUT on some DVD drives noise fades in one off in what appears to be exactly the places I initially collapsed in the Øresund between audio sources in Premiere Pro!

  It's almost like the only original audio track got mixed with the discoloration that are associated.   YET the .wav file that I used in still shows no audio variation and plays very much like the composite mixture, I wanted.

  The preview in still plays too well.

  Can someone explain what is happening?  Is there additional information passed of Premiere Pro in again who somehow got coded on the DVD, such as DVD SOME readers see, but others are not? !!

  How can I prevenet happening and get a DVD with an audio track that plays on all players without fading up and down based on the mix I did in Premiere Pro?

  Thanks for any help to solve this.

  Should I now transfer this question in the Premiere Pro forum?

  I would recommend that publish you on the PrPro forum and list the exact project Preset, as well as the layout and the assets used.

  Good luck, and I will seek for the PrPro position.

  Hunt

• Portege R830-10V - DVD drive makes strange noises

  Hi all
  I just bought this machine and registered the following question:

  If I put in a portable DVD starts very strong buzz. This noise disappears if I put a finger on the reader. In addition, the DVD player starts to chat if I press the keys above the player as the arrow keys. Bothers me a lot.

  I called Toshiba support and they said that they can pick up the laptop. But it is possible that this service costs because maybe this problem is part of the specification.

  You have any ideas? What can I do?
  Best regards
  Denis

  Hi Denis_3,

  Have you noticed this problem with different CD and DVD or just a medium? In General, I also noticed the same behavior, but sometimes just with one disk, so the problem is the drive itself in most cases.

  On this path through the forum it s is not easy to say what the reason is but if it s associated with CD/DVD player and the reader needs replace it will cost you nothing because it s during the warranty. Of course, for out of warranty repairs, you must make ;)

• J3X81AV: HP Pavilion laptop 15 dvd drive making noise

  The DVD writer has stopped reading or recording on DVD or CD as it looks and looks that the tray does not work correctly it makes a scratching noise.

  Hi @ajwees41,

  I don't know the cost.

  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Loud noise clicking noise when you try to play a DVD

  HP Pavilion d4995t desktop PC with High Definition Realteck Audio Ultimate.  Vista Premium o/s.  I play my sound through my HDMI cable to the speakers in my monitor. When I try to play a DVD in the DVD player, I get a loud clicking with no sound from the DVD.   This only happens to the DVD.  CDs play sounds without problem.  If I copy the same files to DVD on the hard drive, I can play from the hard drive and the sound works.  If I connect speakers to the audio output and disable the HDMI output, I can play the DVD in the DVD player and games sound through the speakers without noise.  I ran his tool from Microsoft without success.  Updated all the audio drivers.  I reloaded Vista, which corrected the problem.  But as time passed the problem comes back.  I suspect that the problem was caused by a Microsoft Update. Someone at - it suggestions?

  Hello

  Yes, sometimes after installing the Service Pack for Vista through Windows Update.

  Click on start-> "Control Panel-> sounds-> reading-> select Realtek HDMI Output, click Properties. Click on the Advanced tab above,

• Qosmio X 870 - 13Z - drive BD/DVD produced strange noise

  I recently bought a Toshiba Qosmio x 870 - 13Z Amazon.de.

  I am fully satisfied by this model, but I noticed something 'strange' related to the DVD player. Something new to me I never noticed on other PCs or models of Toshiba. It works very well, since I've mastered the rescue DVD too... I mean like 'strange' is a noise similar to what you usually hear when the Player checks for a dvd just inserted. This noise comes on strange, even if time differences no DVD in the drive. I would like to know if this is normal behavior.

  All of you noticed the same noise?

  Thanks, best regards

  Post edited by: Ansl72

  Thanks for the short comments
  It is possible the monitor to integrity accessible Toshiba Cd / DVD drive in order to verify the health status of the device

  Don t think its bug but it is good to know that sound doesn't seem anymore.