Acer TimelineU M5 - 481 T - 6642 Ultrabook of 14 inches. CD/DVD tray when it starts up and stop noise?

Similar Questions

• I have an Acer computer I want to do a total restore. It came with windows 7 starter edition, and then I bought Microsoft word for it. If Microsoft word will lose if I do the restoration?

  I have an Acer computer I want to do a total restore. It came with windows 7 starter edition, and then I bought Microsoft word for it. If Microsoft word will lose if I do the restoration?

  If you purchased Word on CD, it's no big deal; just reinstall it after the factory restore. If it was bought online, copy the file downloaded to a CD and then reinstall it later.

  Is there a particular reason, why you want to do a restore complete? Have you problems? If so, you can try asking here on how to fix them and do not have to do a restore, reinstall all your programs and all of the updates and service pack 1.

  SC Tom

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012

• The drive on my Acer Z5610 is overheating and stop. How can I transfer my Windows 7 on new HARD drive

  Would appreciate help from the members of the Forum.

  The drive on my Acer Z5610 is overheating and stop unexpectedly. I bought a new 1 TB WD HARD drive. I tried loading the Acer recovery CD 3 I initially created in order to load all applications touch etc, but received a message to say that I got at loading Windows. The computer came pre loaded with Windows 7 Home Premium, so I did not all Windows disks. My question is: How can I transfer Windows 7 on my new HARD drive so I can begin to rebuild the PC?

  Hello

  I think that you have created the driver & application backup, if this is the case & * if the old HDD is still detected & boots you could create a factroy restore discs, if not then you might even get to store.acer.com.

• I get the following popup when I start my Acer laptop with Windows 7 - Microsoft dynamic C++ Debug Library...

  I get the following popup when I start my Acer laptop
  with Windows 7 and I use Google Chrome as My browser - I would like to know how to
  it stop what happens when windows starts. -Thank you--->
  Dynamic Microsoft C++ Debug Library
  program: C:\Windows\system32\igfxsrvc.exe
  File: D\Program Files\Microsoft Visual Studio
  9.0\VC\ATLMFC\INCLUDE\atlcom.h
  Online: 2475
  Expression: 0 & "communiqué called on a pointer that has.
  already been released.
  For more information on how your program can cause a
  the assertion failure, see the Visual C++ documentation on
  argues.
  (Press Retry to debug the application)
  Choice to follow:<--Not seen="">
  Abort Retry Ignore

  Hi Chris,

  This problem may occur because of the conflict between certain third-party applications.

  We will start the computer Safe Mode to check if the problem occurs in Mode without failure. If the problem does not occur in Mode safe, then you can try to set up your computer in a clean boot state to find what startup item or service is causing the problem.

  Step 1:
  To restart in Safe Mode, see the link.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If the problem does not occur in Mode without failure, then you try to put the computer in a clean boot state.

  Step 2:
  To perform Clean boot follow the procedure below.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• When turning on pc and when the acer logo appears it asks to enter the current password, I bought the recovery disk but do not get a chach to enter the bios

  When turning on pc and when the acer logo appears it asks to enter the current password, I bought the recovery disk but do not get a chach to enter the bios

  This looks like a utility Acer protect disk hard & possibly also the BIOS.  You will need to consult your manual for Acer.  You have configured a password of HDD that you are now trying to recover, by chance?  This recovery is not possible if the hard drive has been password protected.

  If it was a Windows login screen then it would show your user/admin name and password entry area & would be clearly identified as a Windows form of the version of Windows being displayed at the bottom of the screen.

• My acer has 40 registry problems when I scan it and pc repair cannot take off

  My acer has 40 registry problems that won't go away when I scan and clean your computer with a pc repair

  Hello

  Too much hype of the system optimizers and registry cleaners will very likely questions while fixing anything.
  They will also find errors to trick you into buying non-existent they program. Ditch the PC repair.

  If you actually have Windows problems or system check with Acer support, their documentation online
  and the drivers and diagnostics.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/AC/en/us/content/support

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  -----------------------------------------------------

  Also, ask in the Forum of answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Acer Aspire R7 stuck in the diagnosis of the PC / had media failure before you start.

  I woke up this morning and I saw my Aspire R7 with a black screen. He had the 'boot failure media' text, so I hard it started again with the power button as the keys were not appropriate. The computer has restarted and then wouldn't start, so I cycled in, on and off a couple of times and then he went in "Diagnose your PC" where he stayed for the last hour and a half.

  Does anyone have any suggestions?

  The specifications are:

  Acer Aspire R7-571 - 53338 G 1 .02Tass

  Core i5-3337U

  Intel HD 4000

  8 GB OF DDR3 MEMORY

  Hi Squilliam!

  Failure of bootable media, generally describes a fault/problem with the hard drive, or the connection. You can check the hard disk drive yourself to ensure that it is well installed, but if it's under warranty (which I think it's maybe) then contact Acer support for your region.

• Why not my Acer Aspire 5336, burn cd / dvd? I tried the update and uninstall drivers! I have

  Why my acer 5336 cannot burn CDs / DVDs on secondary storage (DVD/CD), its leaves is failing or simply the empty disc after burning process took place. It's very frustrating! Help, please. I want my acer to burn CD / DVD. Properties of my acer 5336: CD-ROM/DVD-ROM (standard CD-ROM drivers).

  It may be a problem with the software that you use or the laser on the optical drive can no longer work. I recommend performing a factory restore and then try to burn files to a blank DVD-R/CD-RW. I would try to copy certain files and images just as a test.

• I bought an Acer computer with a real edition of MS XP Prof. FOT years is has been updated and recognized as true .__Now I receive over a status less "invalid / illegal. ? How is it possible

  I bought an Acer computer with a real teacher MS XP edition. Years is has been updated and recognized as authentic. Now I receive a message that is invalid or illegal. How can I solve?
  Kind regards
  T. Hooij

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• WHAT SHOULD DO? MY ACER DRIVE C.------HAS FREE SPACE ON DISK 0. I FEAR, I DELETED THE IMPORTANT THINGS AND IN VAIN. WHAT SHOULD DO?

  I've recently pop-ups telling me that I need to free at least 300 MB because my Acer drive c.------has 0 free disk space.  I don't have a computer wiz and I am scared to have I deleted some important things, but to no avail. Help me someone. Please, I beg you.

  Reginald

  You can have too many restore points, a HD that is too small or too many things installed.  What you can do, and it must be safe is to run the Disk Cleanup Wizard.  This will clean the temporary files and a lot of things

  You can find here

• on acer, dvd will not automatically install games and software.what of evil!

  on my acer laptop, my dvd player will not auto install game discs or software. What's wrong?

  On the top of my head, I would see if AutoPlay is enabled, here is a link that shows you how to disable the feature, then done not in reverse :D

  http://www.AddictiveTips.com/Windows-tips/disable-autorun-autoplay-in-Windows-7/

• My Acer 5315-2153 too heated and stops frequently. I have Windows Vista and Windows 7. What is the problem? If this is the case, how can I deleat Vista?

  The original Windows program was Vista.

  Hi Allen,.

  Thanks for posting this question in the Microsoft Community.

  I'll help you find a solution to the issue. Before we begin, I have to ask you a few questions.

  1 how long have you been faced with the question?

  2. you have any security program installed on the computer?

  3. the problem occurs on OS?

  4. are you aware of any recent software or hardware on the computer changes?

  Search for the exact error message you get to do this in the Event Viewer:

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Check out this link to open the event viewer:

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can start the computer in safe mode and perform a clean boot. Clean boot helps eliminate any conflict of third party software.

  Note: when you are finished troubleshooting, follow step 3, mentioned in the article to start the computer to a normal startup.

  Here is another article on improve the performance of Windows Vista.

  Hope this information was helpful and let us know if you need help in the future about Windows. We will be happy to help you.

• Windows 7 will not update on an Acer Aspire One 722

  Hello, I have an Acer Aspire One 722 - A0722 - 64-Bit - I used the laptop and installed Windows 10 on it and it came to a crawl.  I decided to reset the computer to factory settings.  He succeeded, however, I can not install the updates of Windows.  I am running Windows 7 Home Premium with Service Pack 1.

  I tried to install updates for the first time without success and tried all the solutions I could find online.  I searched through forum after forum and tried all of the solutions that I found and not luck.  I installed several downloads, as recommended by Microsoft and not solutions.  I had subsequently to error code 8008005 and 0x8024402C and 0x8024001e.  I tried again the solutions and nothing has worked.  Most of the downloads that I did from herre: https://www.microsoft.com/en-us/download/windows.aspx

  I finally install CCleaner and updated to Explorer 11 I downloaded directly from the Microsoft Web site.  Who succeeded.  Nothing else has.

  So, I wiped out the computer again and reset to factory settings and am at square one.  I installed NOTHING else at this point expect try Windows updates.  All I get is the progress monitor to continue to operate.  It was 'running' and research updates for nearly 30 hours and nothing.  It still reads ' check for Updates ' and nothing else.

  Any help would be appreciated as I know what else to try.  This seems to be a common problem with no real solution at this moment that my search Google told me.

  Two screenshots are below.  Thank you for any help or advice.  At this point, the computer is basically unusable and it's very frustrating.  I spent hours and hours and hours and nothing.

  Thank you all and well be.    Brad

  

  

  Hello

  In fact, I found a solution that works!  I found this on another forum... Here is the solution...

  Hi I had this same problem, but it can be fixed easily, fist you need to do this update https://www.microsoft.com/en-us/download/details.aspx?i... There for 64 bit, before this, you must disconnect your wifi and LAN and uncheck the box you run internet settings where will be automatically connect when you start windows, and then restart your PC. Once the back is operational, run the update you just downloaded (make sure do not connect to the internet until the update is complete.  Reset.  Now that you have made, you must update the update here is the link to the DLhttps://support.microsoft.com/en-ca/kb/949104. Now, when it comes to restart your PC and go to update and this time it should find updates, can still take a little time, but usually get fist couple in 10 to 15 minutes.

  PS - It analyzed more than an hour before he found updates and started to download. Yes!  It worked... I also downloaded the downloads on a flashdrive from my desktop PC and installed on the Acer from the USB key.

  Thank you and well being.  Brad

• Satellite P105 - GPU overheating as fan does not work

  I brought a Satellite P105 - S9337 laptop computer around a year ago and it's been great, but I had a problem that began a few months ago. The GPU fan does not run under windows or any OS. It works correctly in the BIOS, but when I hit the operating system, it will stop. This is obviously the cause for overhead.

  -J' tried different drivers of Toshiba and other sources. Currently using 7.15.11.5666 which was the last version of Toshiba.
  -Tried all BIOS and running 4.40.
  -Cleaned it if sure there is no dust blocking the fan wheel.
  -I even sent to Toshiba for repair 4 times and it comes back with the same question.

  It's as if the fan control is equal to change the operating system when it reaches him like bios and basic OS (dos, the flash media bootable back past) works very well. It runs when she is hot and stops when it is ok.

  At the moment that I leat overheating for a while then he seems to remember he's a fan after 30 minutes or more and comes into play. It works on OS at full speed, until my laptop loses power or I unplug battery, that I did today to increase the RAM.

  There must be some drivers or BIOS out there that allows the BIOS to manage the fan or it just as it manages itself is so it doesn't overhead. I'm not pleading can someone help me with what it's getting very boring. e-mail is [[email protected]] If you want to contact me, because I'm out of ideas.

  If I can't get this resolved I'm thinking of dismantling and wiring of the fan on but would prefer to avoid that for now.

  My laptop (P100-481) was overheating too since I have updated BIOS 4.20 and above all. The latest version of the BIOS with work-fan control was 4.00.

  There are two ways to set the fan control:

  1 go to BIOS 4.00. You'll get stuttering in games because the initialization of GPU in the form of Versions all 3.30 to 4.00 are buggy.

  2. you can try this way: [http://www.laptopvideo2go.com/forum/index.php?s=679696d192a1f43137253716ebd799b8&showt = 19190 CIPO & view = findpost & p = 79039]

  It's not easy install a double Windows, but it worked for me.

  There is a bug in the BIOS 4.20 4.30 and 4.40 and a lot of people have trouble with the GPU fan. So hopefully Toshiba find time to fix it in the near future.