00000643 error code and error 2 Code

Similar Questions

• Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer is located and ready to install, I get a PnPx device then error

  Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer, wireless printer is ready to install I get a PnPx device Microsoft authorization. Runs like it is installing then error is presented. I tried fixit did not work... Frustrated

  You could settle on a previous installation. Try this:

  Go to your device manager and see if you have an old installation of the printer and right click Uninstall. You can also check if there is an old facility of the printer in Control Panel, printers, right click and delete it. Install the printer using the Add Printer Wizard. If it fails again with the same error, go to Device Manager right click on the name of your computer, click on "Scan for harware changes". He must find the printer and install it. Now you can check your printer if its work. If this does not work, please indicate your model of printer on your next reply.

  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

• Windows 00000643 error

  I tried to update Windows Update for Vista Home Premium Service Pack 2For some time and continue to get this error.  I followed the instructions for two methods listed here (http://support.microsoft.com/kb/KB976982?wa=wsignin1.0#method2) and it has not solved the problem.  Apparently the Microsoft Fix is no longer this program works.  I tried to repair the. NEt, uninstall and install, but nothing works.

  In the section uninstalling I have the programs listed below installed. I don't know if I should remove them or not.

  -Microsoft Net Framework 1.1
  -Microsoft Net Framework 3.5 SPI
  -Microsoft Net Framework 4 Client Profile
  -Microsoft Net Framework 4 extended

  Someone would be kind to share with me how do I solve this problem?  Thank you.

  J.R.

  A friend also has the same problem, it is ready to live with it. In your case, you may need to remove completely all versionso of .net and re - install.

  I have provided a link to Aaron Stebner tool: http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

  And the list of troubleshooting guides: http://blogs.msdn.com/b/astebner/archive/2005/08/22/unified-net-framework-troubleshooting-guide.aspx

  J W Stuart: http://www.pagestart.com

• Error 00000643

  Please can you tell me why it keeps failing when you try to install NET Framework 3.5 Service Pack 1 and NET framework 3.5 Family it gives me error 00000643 ar code. Thank you

  Hi ellie20020,

  Please see the following link for the Microsoft KB article to download The Windows Installer CleanUp utility. When you go to download it follow these steps:

  1 Select this option to Save and put it on your desktop

  2. click right msicuu2.exe (for Windows Installer CleanUp Utility) and select run as administrator.

  3. follow the wizard to install the Windows Installer CleanUp utility

  Now, click Start>all programs>Windows Installer CleanUp utility (provide administrator rights if prompted). Now, try to locate and remove the .net Framework 3.5 software, after doing so, restart your computer.

  Now download and install the NET Framework 3.5 and the update:

  1. Microsoft .NET Framework 3.5

  2. Microsoft .NET Framework 3.5 Service Pack 1

  3. Microsoft .NET Framework 3.5 Family Update for Windows Vista x 86, and Windows Server 2008 x 86

  The last update you can see if for Windows Vista x 86 (32-bit aka), if you have a 64 bit system to ensure that you download and install the x 64.

  We can't wait to hear back from you on your results.

  Brian
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The error code is 00000643. I can't install the update and I think it comes to Netframe.

  I can't install this update and I keep getting the error code 00000643. What should I do?

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  =====================

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After the the .NET Framework Cleanup tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the relatedhttp://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

• updated Windows error code '00000643' and '00000646.

  Here are the error codes I get when I run my updates, I think that my computer is not working properly because of these updates is not installed please help :)

  Try this for your error Code 646 and read ALL the messages/solutions to your problem on the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2

  Read the info on the above link to error Code 646.

  With the compliments of: David_O - Support Engineer

  This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2

  Method 1: Save the Windows Update files

  1. clickStart and type notepad in the box start the search .

  2. click onNotepad in the programs list.

  3. copy the following commands, and then paste them into the opened Notepad window:

  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S

  1. in Notepad, on thefile menu, click on record under.

  2. in the listrecord under , click all files.

  3. in thefile name box, type register.bat.

  4. save the Register.bat file to your desktop.

  5 right-click the Register.bat file, and then clickrun as administrator. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or clickcontinue.

  6. try to install the updates again.

  Method 2: Download and install Windows Update agent

  For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:

  949104

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/923100/

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not help:

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

  .

• I can't install the update from 6 to 4. Error Code 0 x 00000643...

  I can not install update 6-4.  Error Code 00000643 please help - I have tried everything.

  Thank you in advance,

  Jane

  Hello

  For 6to4 adapters:

  Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you want and
  on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message.
  http://support.Microsoft.com/kb/932520

  Check the answer by Diana D. here:
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/a75e8bf1-9a63-4CF4-BF6C-d43a26175959

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Installation of Canon PIXMA MG5200 Wireless Printer gives the error code 0 x 00000643 on Windows Vista

  Original title: Wireless Printer put in place

  Trying to install the scanner software etc. on my new printer canon PIXMA MG5200, already implemented successfully using WPS, while it was printing ok, error code 0200 0000 documents came along with a "a newer version of MP readers is installed for cancelled installation. Uninstalling now left me unable to reinstall the printer link with my laptop with the advent of error code 0 x 00000643 up - help what I did?  Vista Home is my OS. Our other laptop which runs on Windows 7 is still printing ok but also not load the software. Canon told me to ask you to clean the registry? ! If this is what is needed, how can I do this, and surely the problem repeats whenever I try to install again. I tried the system restore before I loaded the software and no change.

  Hi AlisonHamilton,

  It is sufficient to indicate the complete error message you receive.

  Method 1: You can see the steps outlined in the article below, which deals with a similar question

  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).

  http://support.Microsoft.com/kb/944960

  Method 2:  You can run the fixit available in the link below

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************

• Can someone explain please the 4SNS/1/40000000 error code: TMOP - 127.875 and how to solve the problem?

  AHT error code.

  You have problems? Why do you run Apple hardware *?

  Of

  http://www.CNET.com/news/how-to-invoke-and-interpret-the-Apple-hardware-tests/

  which would indicate a bad sensor on one of your memory modules or riser:

  In the case of an error in probe (4SNS), to determine what type of sensor is referenced, look for his first letter, which should be 'I' for the current "V" or "T" for temperature, voltage.

  Then check the second letter from the list below to see which component it refers to:

  A: ambient air sensor
  B: battery
  C: Central processors (CPU)
  D: DC (direct current)
  e: PCI-express slot
  F: FireWire port
  G: graphics processor (GPU)
  H: drive
  h: heat pipe (heat sink)
  L: liquid crystal display
  M: memory or the memory riser cards

  I would first install a monitoring app like Mac Fan Control of temperature

  http://www.CrystalIDEA.com/Macs-fan-control

  to see of you can find a bad sensor by reading the memory riser card.

  You have a MacBook Pro as indicated: MacBook Pro, OS X Yosemite (10.10.5)

  Since this is the Mac Pro desktop forum

• 4005 and 4013 error codes

  Air, 16G iPad. tried to install the latest iOS update. ultimately received 4005 and 4013 error codes. What do these codes mean and how can I fix the problem?

  Try troubleshooting on this page: If you see 9-4005, 4013, 4014 error when you restore your device iOS - Apple Support

• Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

  Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

  Have you tried turning off and back on again?

• Error code: sec_error_unknown_issuer when opening Gmail and many other trusted websites!

  I tried to open G-Mail and a few other trusted sites and Got "this connection is untrusted" with error code: sec_error_unknown_issuer.

  There is no other button then "get me out of here".
  Date and time are also defined in law.
  I use Eset Smart Security 7 and Firefox on Windows 8 unique.

  I faced this problem right back in Firefox 2 days only. All other browsers (Chrome, iron, IE10) work as usual.
  How can I solve this problem?

  Concerning

  If you use the feature of ESET that filter web traffic, this problem could be caused by ESET intercept your secure connections and presenting a false certificate. If you see ESET as the transmitter, you have a few options:

  (1) disable SSL filtering

  This would solve the problem instantly, but you would have less protection. Check the documentation of your product for specific details, or if you have ESET NOD32 ANTIVIRUS 7 look under:

  Advanced Setup (F5) > Web and email > Web access protection

  Here you can adjust if HTTPS is scanned. (At least, so according to this manual.)

  (2) try ESET automated to import certificate

  This will allow Firefox to accept the false certificate signed by the certificate of ESET.

  These steps are listed on the forum of ESET:

  • With all browsers and e-mail clients private, disable SSL analysis (Advanced setup (F5) > Web and email > Web access protection, I think under protocol filtering > SSL), OK change
  • Re-enable SSL scanning, OK change
  • Start Firefox and test

  (3) manually import the certificate ESET in Firefox

  This will allow Firefox to accept the false certificate signed by the certificate of ESET.

  According to the manual, you can export the certificate to ESET under:

  Advanced Setup (F5) > Web and email > access protection Web, perhaps in the section protocol filtering > SSL

  Search

  See the certificate > Details > copy to a file...

  Once you save the file (probably with a CER) you can import it using the certificate Firefox display.

  "3-bar" menu button (or tools) > Options > advanced > mini-onglet Certificates > "view certificates" button.

  Click the References tab and then click the import button.

• How to solve ' error Code: 403.14 "try to open a link in a Web site that works on other computers and worked on my computer til now.?" "

  The site is www.Jardencs.com/careers. When I click on "Career opportunities", I get the following error message:

  Query error
  Prohibited directory
  Registration denied
  Close the browser and try to connect again.
  Error code: 403.14.

  The link worked on my computer up until now and now working on my cell phone. I recently installed the torch, but uninstalled it today when I started having this problem.

  When I click on the link, I get sailed on a different site, https://erecruit.jarden.com/erecruit/jarden.html. This is done via a script rather than a simple link.

• Watch ABC app will not allowed to view episodes of TV and get error code 400-1

  My provider has recently changed from Verizon FIOS to Frontier communications.  Since this change I can no longer watch the ABC shows on my iPad app and receive the error code 400-1.  What can I do to fix this?

  You may need to update your login information in the application to reflect the new provider.

  Your new Pact include internet access, often named something cute like TV on the go, Quantum, etc.. ?

  Complain to the border?

  Your message is appeared in the AppleTV forum. Posted in iPad?

• I had version 9 ff. When I tried to get on FF, I got the 404 error code on the server. I uninstalled ff and reinstalled version 12. Always get the code 404. Help

  I have Windows XP. I can not access FF. When I do I get error code 404 and the message "URL/firefox is not found on this server." It started today, I had version 9 ff. I've uninstalled and reinstalled version 12, but still not same error when you try to access the FF.
  PS: Other browsers work fine

  Try to open Firefox and Google by typing in the address bar at top and press on enter... If it works, I'd say something happened to your homepage settings and try this: How to set the home page