0x80004005: unspecified error

Similar Questions

• Trying to extract files for Photoshop Elements, get 0x80004005: unspecified error and the extraction fails. Windows 7, downloaded by purchase of Wacom Intuos.

  Hi, I bought a Wacom Intuos and it came with the software provided. Download of Photoshop kept in check the end (1000 MB + off 1012 mb!) and then when he finally said he had successfully downloaded, I get this error message when you try to extract the contents of the folder:

  

  Can someone help me please? I have also contacted Wacom but they provide support for the software, what they bundle, of course. I'm also over my limit of 5 download because of the failure to download. I used download Ninja to help prevent failures, but it took 3 will get the full download.

  If necessary I can ask them to renew my downloads again and try to download again. I can provide my serial key number to an Adobe representative if there is any way I can download the program directly shaped by using their program to download? There seems to be no way to speak directly to a customer service agent :-/

  Congratulations Jess

  exe looks like an incomplete download.  If you are in doubt, check the size of the file.
  

  
  

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • Premiere Elements: 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 12 | 11, 10 | 9,8,7
  • Lightroom: 5.6| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• LabVIEW: Unspecified error (Hex 0x80004005). = OR System Configuration: various failure (Hex 0x80004005).

  Hello:

  I get this error when you try to run the main.vi

  I am able to run the program from my computer at work fine. I then copied the files on another computer in our laboratory. Click on the arrow of the execution and the deployment progress window appears. Deployment status reads as follows:

  Initializing...

  Calculating dependencies...

  LabVIEW: Unspecified error (Hex 0x80004005).

  ========================

  System OR Configuration: Various operating default (Hex 0x80004005).

  I've been to the measurement and Automation Explorer and installed / reinstalled the system software to remotely on computers and that they are corresponding versions.

  Any help would be greatly appreciated.

  With the help of technical support NOR, I think we have found a solution. We uninstalled Labview from the computer. We have then reinstalled in the following order. 1 install the labview development environment in 2015. 2. install the real time module. 3. install the FPGA. 4 drivers CompactRIO. We installed these one at a time to make sure they were installed in the correct order, and it seems to have solved our problems. Thank you.

• 'Unspecified error' when you deploy by using EPMA

  So far, the symptoms include (11.1.2.1 Version):
  
  • When you create a new Member account with the same properties as his brothers and sisters, the application will validate, but abandonment of deployment of an "unspecified error".
  • If this member is removed the application will be deployed successfully.
  • I created a member of different account in a separate part of the hierarchy, with the same properties of Member exactly like his brothers and sisters and get the same "unknown error."
  
  The same error occurs when you try to add a new Member, not just a new account.
  
  The associated transaction log deployment has failed is below:
  
  Error reference number: {26061716-0113-4A8B-9EB9-C93A019097B9}
  NUM: 0x80004005; Type: 0. DTime: 2011-08-08 21:49:36; SVR: ServerName; File: CHsvMetadata.cpp; Online: 1056; Worm: 11.1.2.1.000.3082;
  NUM: 0x80004005; Type: 0. DTime: 2011-08-08 21:49:36; SVR: ServerName; File: AgentHelper.cpp; Line: 1223; Worm: 11.1.2.1.000.3082;
  NUM: 0x80004005; Type: 0. DTime: 2011-08-08 21:49:36; SVR: ServerName; File: CHfmAwbAgent.cpp; Line: 665; Worm: 11.1.2.1.000.3082;
  
  In the EPMA journal, we had three following errors:
  
  [EPMADIM] [INTERNAL_ERROR:32] [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException] [tid: 22] [ecid: disabled, 0] SVR_ERR_SECURITY_INVALID_SESSION:Invalid to Hyperion.JobManager.JobManagerProxy.DeleteJobs (sessionID Guid, Int32 [] jobIDs) Session
  
  [EPMADIM] [INTERNAL_ERROR:32] [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException] [tid: 22] [ecid: disabled, 0] SVR_ERR_ARRPROP_VAL_MEMBER_NOT_FOUND:Member ID 5699 does not exist in the dimension of '8 '. At Hyperion.DimensionServer.Proxies.PropertiesProxy.InternalEnumPropertyCategoriesForMember (MemberLocator index)
  
  [EPMADIM] [INTERNAL_ERROR:32] [EPMADIM-1] [EPMADIM.Hyperion.CommonServices.Exceptions.BaseException] [tid: 22] [ecid: disabled, 0] SVR_ERR_CANT_CREATE_DUPLICATE_DIMENSION_NAME: failed to create the name of the Dimension in duplicate. to Hyperion.DimensionServer.Proxies.ApplicationsProxy. <>c__DisplayClass3e. (b__3d) < IncludeDimension >
  
  
  Any suggestions on how I can get this app to deploy new members?
  
  Thank you
  
  Ryan
  
  Published by: user11948410 on August 9, 2011 06:01

  Please kill the HsvDatasource.Exe, HsxServer.Exe and also Security.Exe CASE process in windows Task Manager on all servers applications HFM and Redepoly the Application.

• Error code Win32 returned by the print processor: 2147500037. Unspecified error

  I see that this error code has been resolved.   I have a few questions on this topic tho.  Loop here, is where the fun begins.  If i see this exact problem in my hosted cloud envorioment.  The printers are installed locally and are drawn on the network when the user logs in the hosted environment. The user connecting to a full desktop, which is a Windows 2008 R2 server server.  They only receive this problem when printing via the cloud. that uses the same printer drivers installed on the local PC.  On-site printing has the success rate of 100%.

  Here are the mistakes I see:

  Https://rem.exactbid.com/ServiceRequest/SRFsmart/srprintable.as, belonged to craig_REM, document failed to print on printer HP LaserJet P2050 Series PCL6 (from CRAIG) in session 18. Try printing the document again, or restart the print spooler.

  Data type: NT EMF 1,008. Spool file size in bytes: 589824. Number of bytes printed: 540384. Total number of pages in the document: 2. number of pages printed: 0. Client computer: \\VS-XA35. Error code Win32 returned by the print processor: 2147500037. Unspecified error

  Where I am confused, is that I have no driver installed on the server.  they are all drawn in front of the user login local machine solange.  With printing works fine locally.  Uninstalling the drivers will make them any good?  or where should I be looking next?

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Serverforum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Cannot create an excerpt from the DVD - unspecified error. What can I do?

  Trying to create a DVD from windows DVD creation.  When I try to listen to excerpts, video the error screen appears: unspecified error.  What should I do?

  Hello

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of Windows is installed on your computer?

  Reference: http://windows.microsoft.com/en-US/windows7/help/which-version-of-the-windows-operating-system-am-i-running

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Method 1:

  Try to change Windows DVD Maker DVD-Video settings and check.
  Reference: http://windows.microsoft.com/en-US/windows7/Change-Windows-DVD-Maker-DVD-Video-settings

  Method 2:

  Check if the audio and video filters are causing this issue.
  Reference: http://windows.microsoft.com/en-US/windows7/Video-filters-in-Windows-DVD-Maker-frequently-asked-questions

  Also, please take a look at the article.
  Solve problems with creating a DVD-video using Windows DVD creation
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Method 3:

  Clean boot your computer performance.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to set the computer to start as Normal mentioned in step 7 in the above article.

  Method 4:

  Try to perform a SFC scan on your computer and check to see if that fixes the problem on your computer.

  Click on the link below and follow the instructions in the article.

  http://support.Microsoft.com/kb/929833

  Use / scannow command from the command prompt.

  Note:

  ·         You must be logged on as administrator to run sfc.

  ·         /scannow: Scans all protected system files immediately.

  ·         If sfc detects that a protected file has been replaced, it retrieves the correct version of the file from the %systemroot%\system32\dllcache folder, and then replaces the incorrect file.

  If the %systemroot%\system32\dllcache folder is corrupt or unusable, use sfc/scannowto repair the contents of the Dllcache directory.

  Provide us additional information, as appropriate. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

  Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

  Clear the error on windows server 2008. All of the above files are locked.  We maintain active directory on and it is also not working.

  Help, please.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department for further explanations.

  I hope this helps.

• Once I try to print, followig message "LINE 1171 CHAR 1 ERROR: UNSPECIFIED ERROR CODE: 0 url:res://c:windows\system32\shdoclc.preview.dlg.

  Once I try to print, followig message LINE 1171 CHAR 1 ERROR: UNSPECIFIED ERROR CODE: 0-url:res://c:windows\system32\shdoclc.preview

  Hi NoelHughes,

  ·         The issue is limited to a specific application?

  ·         Did you do changes on the computer before the show?

  I suggest you to consult the article in the Microsoft Knowledge Base and check if the problem still persists.

   

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  You can also view the article mentioned for more information below:

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know the results.

• Cannot access the network - Get unspecified error 0 x 80004005

  Hi all

  I have a strange problem that I hope someone can help me with.

  I have a PC Windows Vista Ultimate, newly installed, all the patches applied. Any other installed apps don't except MS Office.

  Not my problem, I have a NAS drive on my network and can be accessed by different machines on my network (IE. \\NAS)

  However for some reason any my Vista machine has ceased to recognize this. Now I can only connect via an IP address (IE. ( \\192.168.0.2).

  Whenever I have try type \\NAS he says "Windows cannot access \\NAS... etc etc" with a "unspecified error 0 error Code 80004005 x.

  He used to work, but now it does which is very weird. When I click on diagnose says that it cannot find \\NAS. However, as this network drive has a web front end, when I type its IP address there is no problem at all and I can access it, but not through windows Explorer! I use a TP-Link wireless adapter. I have a LAN connector normal that I disabled and enabled with no effect (although I have not physically connected them)

  I can navigate to Windwos Vista machine to it seems to work very well.

  Any ideas?

  Thanks in advance.

  Neal.

  If the regular way, you connect a reader could not be used and that you were forced to connect by ip, get error 80004005 would make sense, because it means that the rights or false refused/insufficient access permissions. Your network can have a parameter saying denied access by ip address, so either you might find this setting, or find a way to solve the original problem, making it impossible to connect as normal to you.

  I would check the firewalls, because your firewall or the firewall of the NAS could have been changed to not connect to the NAS or do not allow you to connect, respectively.

• The system restore failed. Error message (unspecified error occurred during restore).

  The system restore failed.  Error message (unspecified error occurred during restore).  I am running Windows Vista Home Premium.  I uninstalled Mcafee Security Suite and System Mechanic 9 which are the security only packages I have.  After uninstalling the above, I tried several points with restore the with the same results.  Any ideas?

  Nortonn, McAfee etc often stops system restore:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Run more high tool ot remove all McAfee.

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Unspecified error occurred during System Restore.Running Vista Home Basic 32 bit

  After running system restore and restart my computer, I get the message "unspecified error occurred during system restore. I'm running Vista Home Basic

  32-bit. someone at - it a response? I have no idea what to do next.

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• I run Vista system restore; Msg says could not complete - "an unspecified error occurred during system restore.

  I tried to run the various restore points system restore.  Whenever the result is the same: msg says could not complete - "an unspecified error occurred during system restore.

  Try again in Safe Mode.

  What you are running for an anti-virus? If it's anything other than Microsoft Security Essentials, you may need to temporarily disable.

  If this does not work, you can run it in Mode safe mode with command prompt. Once the command window appears. type %systemroot%\system32\rstrui.exe and press ENTER. The system restore GUI will go up, and you can restore to the date / time selected, or select a time different everything such as running Windows.

  SC Tom

• Blackberry updates & "unspecified error occurred during system restore.

  After installing updates to Blackberry, Blackberry sync would not work.  Tried restoring the system 6 - 8 times for restoration different dates.  None of the restoration system worked.  Still received the error message as "unspecified error occurred during system restore.  Any suggestions?  I ran out of restore points.

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  Hello

  If you use Norton, which could interfere with the restoration of the system.

  Disable Norton while doing your system restore.

  See you soon.

• wwhy does keep system restore with the message "an unspecified error occurred during system restore.

  Any date, I chose, whenever I try a system restore, I always get this message-"an unspecified error occurred during system restore", why?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.