0x8002801C error code

Similar Questions

• Win7 32bits version - 0x8002801c error code company

  Recently upgraded from WinXP SP2 for the 32-bit version of Win7 Enterprise - new system.

  I need to record and run an Indian tax called eTDSRPU dept.program who has run ok under WinXP.

  I cannot register the program under Win7 - system returns error codes and asks me to search online for an answer. Error codes are 0x8002801c, 0 x 80040200 and 0 x 8004005

  For each .ocx or .dll error messages are in format-
  "The module xxxxxx.ocx / xxxxxxxxxxxx.dll was loaded but the call to DllRegisterServer failed with error... code. »

  Any help to run will be more useful.

  Thank you.

  http://www.caclubindia.com/Forum/ETDs-RPU-in-Windows-7-148739.asp

• 0x8002801c of RegSvr32 error code.

  I bought a HP Officejet 6500 E709n and installed successfully on one of my laptops HP, but when I tried to install in on another one of my laptops HP, a "fatal error" when installing took place.  I went to the HP site and found this page:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01783189&tmp_task=solveCategory&LC=en&DLC=en&cc=us&lang=en&product=3795406

  I'm not positive is the error code was the same, but when I tried to follow the instructions on this page, I got the 0x8002801c error code.  I searched online for more information about this error code, but are pages that have no meaning for me.  Maybe it's not the only problem to get the printer installed on my computer, but it seems that that would be a start.

  Help, please

  Lorien,

  Thanks for the advice but I got it to work somehow.  I don't know exactly what has worked this time, but I did the following:

  First of all, I uninstalled all the HP programs install disc and shut down the computer once again.

  Rebooted the laptop and ran Norton 360 scans, including registry cleaning.

  Run the installation disk and once more the same fatal error occurred.

  I then chose the option to install other programs from the disk to Setup again.

  I have installed the HP Photosmart Essentials, as I had done previously.

  I open the HP Solution Center, and this time it worked.

  As I said, I'm not sure if the Norton 360 scans made the difference, but it seems to work fine now.

  Thank you

• Error codes: 80072EFE, 80240038, 8024402F & 0X8002801C (cannot install updates)

  Having this problem with windows update for a month now, 2 years without problem even after uninstall of numbers and install last Toshiba out of the box, last mth recovery due to virous, completed programs, WUpdate worked for an hour, then started giving me all this error codes whenever I click Update. So what's the problem? Try all your suggestions on this forum of people with the same problem, and none worked for me. At soon Hen

  I assume you are using Spyware Doctor with Antivirus.

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code when you try to burn CDs: C00D10DA

  0x8002801c

  I tried to burn a CD as usual and received the error C00D10DA. I tried the fixes with lowering the burn speed and did not work. I also tried to RUN "regsrv32wmp.dll" and got a different error message "DllRegisterServer failed: Error Code 0x8002801c.  Help, please. This never happened, and I use the same CD as before with no problems.

  Thank you.

  Hi SPANKIJ,

  ·          Do you have any other software installed on the computer for CD burning?

  ·          What version of Windows media player installed on the computer?

  ·          Did you the latest changes on the computer?

  (a) clean the disk, make sure that it is not corrupted, and then try again.

  (b) use a different brand of blank discs.

  (c) close other open programs, and then try again.

  If fails it above step then see them below Microsoft article and run the fixit tool available, check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

  http://support.Microsoft.com/kb/324129

• Error codes when installing the program, 0 x 80040200

  I get the following error codes while attemmpting to install a program:

  0 x 80040200

  0x8002801c

  0x80004005

  Can anyone help

  The application tried to install has been e - tds_RPU_2.1.exe from the link below:

  The link is http://www.tin.nsdl.com/Downloadsquarreturns_regular.asp

  Hello RAVICHANDRANR,

  It is possible that some dependencies that are not loaded correctly. I would like to try and install by right clicking on the installation or the configuration file and select "Run as Administrator".
  Then try and save the OCX manually using regsvr32.exe.

  To register:

  Unregister and register again:

  1. click on Start Orb, in the start search box, type spr32x30.ocx /Unregister. and then click OK.

  2. click on Start Orb, in the search box to start, type spr32x30.ocx/REGSERVER, and then click OK. After you run this command, the operation is complete.

  3. now try again to your installation.

  "If this doesn't help, then because the SPR32x30.ocx seems to be spreading" "FarPoint Technologies, Inc., I suggest you post in the Forums of Far Point community listed below. http://www.clubfarpoint.com/forums/forums/default.aspx

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• error code - 50

  I was trying to update my I-phone with IOS 10.02 6.  While it was updating the phone, I received an error code-50.  the phone is now stuck and I can't seem to exit the mode "update."  What does this error code mean?

  Error code - 50 on iPhone

• I keep getting an error code (-1) cannot restore iphone message what can I do?

  My iphone 5 c don't continue reading 'no service' or 'research', but it has service through Verizon, I tried to switch to airplane mode, turning turn off / turn on the phone and restore with itunes, but during the restoration it shows error message - 1 will not restore, is there anything else I can do?

  Try to restore 2 times more. If get the same error message

  take the iPhone at the Apple store nearest for a free evaluation.

  Once the diagnosis is complete, staff will explain your options.

  -1 is the hardware failure error code. Assuming that no damage to the

  your iPhone is not jailbroken, you may qualify for a reduction

  the price of the replacement warranty.

  Make a Genius Bar reservation to avoid delays.

  http://www.Apple.com/retail/Geniusbar/

• What is the error Code (-18)

  iPhone 6 sec more

  iOS 10.0.1

  Get an error code (-18) what this code means?

  Some parts of the phone have been replaced lately?

  What's your iTunes updated to the latest version?

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• Can someone explain please the 4SNS/1/40000000 error code: TMOP - 127.875 and how to solve the problem?

  AHT error code.

  You have problems? Why do you run Apple hardware *?

  Of

  http://www.CNET.com/news/how-to-invoke-and-interpret-the-Apple-hardware-tests/

  which would indicate a bad sensor on one of your memory modules or riser:

  In the case of an error in probe (4SNS), to determine what type of sensor is referenced, look for his first letter, which should be 'I' for the current "V" or "T" for temperature, voltage.

  Then check the second letter from the list below to see which component it refers to:

  A: ambient air sensor
  B: battery
  C: Central processors (CPU)
  D: DC (direct current)
  e: PCI-express slot
  F: FireWire port
  G: graphics processor (GPU)
  H: drive
  h: heat pipe (heat sink)
  L: liquid crystal display
  M: memory or the memory riser cards

  I would first install a monitoring app like Mac Fan Control of temperature

  http://www.CrystalIDEA.com/Macs-fan-control

  to see of you can find a bad sensor by reading the memory riser card.

  You have a MacBook Pro as indicated: MacBook Pro, OS X Yosemite (10.10.5)

  Since this is the Mac Pro desktop forum

• 4SNS/1/40000000 error code: VDOR - 18.678 & 18.679

  MBP early 2011: I just ran the AHT twice, the first round gave me an error code of 4SNS/1/40000000: VDOR - 18.678, second inning gave the code 4SNS/1/40000000: VDOR - 18.679. Does anyone know what are these error codes? My best guess is probably the RAM, I have (2) modules of 8 GB 1600 Mhz DDR3 OR wireless networking equipment installed. I've noticed recently while multitasking, the wifi connection seems to cling and web pages will not load/downloads will pick up. But the way in which applications will be blocked for 60 seconds makes me think of a bad situation of RAM I have had in the past. Any help would be greatly appreciated since the nearest bar genius lies in 2 1/2 hour. Thank you!

  No RAM - 4SNS is a sensor error.

• Transcend Jet 360 Lite SD care & "the operation cannot be completed because an unexpected error occurred (error code - 50)"

  Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014.  Installed their wake from sleep early support software.

  Above error code invite you in this context: I wake up Mac in the morning after sleep.  Transcend icon "wake up" and appear on the desktop (as it should).  I check disk utility and the card is recognized.  HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code?  For about a week I missed that everything seemed normal.  My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay.  90% of the time when I remove and reinsert the card, the operating system recognizes, all right.  (There are a dozen times when I had to reboot for it to be recognized.)

  All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL).  This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution.  FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences.  Thanks in advance!

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Error code: sec_error_ocsp_unauthorized_request

  I'm NOT going to be nice. Here's the description - I disabled the option "question responder OCSP servers to confirm the current validity of certificates. Has no effect. Still, I get this error:

  An error occurred during a connection to * removed * .com. The OCSP server refused this request as unauthorized. (Error code: sec_error_ocsp_unauthorized_request)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  You... don't even leave the website to load. Try again. Try again. Try again. Try again. Try again. Try again. The certificate of the site is very well as evidenced by SIX different sites of the verification of the SSL certificate. I can't add an exception because FF is unable to obtain the certificate.

  I tried to clear all - cache, cookies, history, blah blah blah

  I am so bored of you people cost me more time.

  It's fine in IE and Chrome.

  If I didn't need Firebug, I would switch to Chrome right now.

  edited because of the language according to the rules-forum-guidelines

  You're right, it is not sensible.

  Never made an exception for the site.

  FINALLY, what worked was rename the cert8.db file in the profile folder so FF could generate a new. Then FF grabbed the cert very well.

  Thank you for the help, sorry for the earlier rant.

• 4005 and 4013 error codes

  Air, 16G iPad. tried to install the latest iOS update. ultimately received 4005 and 4013 error codes. What do these codes mean and how can I fix the problem?

  Try troubleshooting on this page: If you see 9-4005, 4013, 4014 error when you restore your device iOS - Apple Support