0x8007001f error code

I trieg run 11 update and they all failed error code; 0x8007001f. I tried more than once. Same error of all time.

Thank you * address email is removed from the privacy *

Among the updates:

Update security for Windows Xp (KB2585542)

Fior updated security Windows XP (KB2723135)

Update security for Windows XP 9 KB 27331847)

Hello

You have all 3rd party antivirus installed on your computer?
Try the methods provided and check.
Method 1:
If you have a software antivirus installed on the computer, then turn it off.
Warning: If you need to disable temporarily to install additional software; You must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2:
Perform a clean boot and then try to install the update. Check if the problem persists. Check out the link and follow the steps.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: Once the diagnosis is made, follow the steps in the article to configure the computer to start the Normal start.
Method 3:
You also check out the link and follow the steps.
Cannot install Windows updates
http://support.Microsoft.com/kb/555461

Tags: Windows

Similar Questions

  • Error code 0x8007001F when reinstalling Windows Vista

    Well I try to perform a restore of the system since the restore disc, that I got with my PC 4 years and it copies the files and broadens their and then I get the 0x8007001F error code and he said: he can't complete the installation.

    Please can I just get a new clean copy of vista?

    Well I try to perform a restore of the system since the restore disc, that I got with my PC 4 years and it copies the files and broadens their and then I get the 0x8007001F error code and he said: he can't complete the installation.

    Please can I just get a new clean copy of vista?

    Hey becci1978

    you don't say why you were reinstall vista

    You may have a hardware problem with your computer that causes the error

    I suggest you contact your computer manufacturer for assistance with the help of their recovery methods

    Walter, the time zone traveller

  • Download 0x8007001F error message when you install the latest updates in Windows XP.

    Original title: problems with the update of my compooper (computing)

    Windows will not update it after updates KB2707511, KB2699988, KB2709162, KB2685939, KB2510531, KB2544521, KB2718704. I already got an answer to a clean boot and I did with no results, I also re installed IE8 with still no result. I get the 0x8007001F error code and all these updates keep in default even after using Mr. Fixit. This becomes a real headache. My computer is constantly freezing up and I lost my audio controls, it does not at the moment where opening tabs announces that there is a long list. Please, someone give me a remedy for this nightmare.

    Your suggestion of a clean boot is not resolution, I first had to remove a virus with Norton and then install the latest version of IE 8, then updates went through. I also had to use the Norton Power Eraser program in order to irradicate of other inhibitory start-up problems which were deeply rooted in my hard drive. Thank you for your attempt to help me, but I was the one who had to understand this. Now, my computer is high and GREAT work! I would say that MSN and Norton to collaborate in trouble all program and incorporate into the program of Mr.Fixit you who will remove the virus and update at the same time in order to avoid such a period of long downtime for all customers who have similar problems.

    Sincerely,

    Clinton joints

  • error code - 50

    I was trying to update my I-phone with IOS 10.02 6.  While it was updating the phone, I received an error code-50.  the phone is now stuck and I can't seem to exit the mode "update."  What does this error code mean?

    Error code - 50 on iPhone

  • I keep getting an error code (-1) cannot restore iphone message what can I do?

    My iphone 5 c don't continue reading 'no service' or 'research', but it has service through Verizon, I tried to switch to airplane mode, turning turn off / turn on the phone and restore with itunes, but during the restoration it shows error message - 1 will not restore, is there anything else I can do?

    Try to restore 2 times more. If get the same error message

    take the iPhone at the Apple store nearest for a free evaluation.

    Once the diagnosis is complete, staff will explain your options.

    -1 is the hardware failure error code. Assuming that no damage to the

    your iPhone is not jailbroken, you may qualify for a reduction

    the price of the replacement warranty.

    Make a Genius Bar reservation to avoid delays.

    http://www.Apple.com/retail/Geniusbar/

  • What is the error Code (-18)

    iPhone 6 sec more

    iOS 10.0.1

    Get an error code (-18) what this code means?

    Some parts of the phone have been replaced lately?

    What's your iTunes updated to the latest version?

  • I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

    The operation cannot be performed because one or more required items be found.

    (Error code - 43)

    I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

    I'm using an iMac with OS X El Capitan 10.11.6 operating system

    Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

  • Can someone explain please the 4SNS/1/40000000 error code: TMOP - 127.875 and how to solve the problem?

    AHT error code.

    You have problems? Why do you run Apple hardware *?

    Of

    http://www.CNET.com/news/how-to-invoke-and-interpret-the-Apple-hardware-tests/

    which would indicate a bad sensor on one of your memory modules or riser:

    In the case of an error in probe (4SNS), to determine what type of sensor is referenced, look for his first letter, which should be 'I' for the current "V" or "T" for temperature, voltage.

    Then check the second letter from the list below to see which component it refers to:

    A: ambient air sensor
    B: battery
    C: Central processors (CPU)
    D: DC (direct current)
    e: PCI-express slot
    F: FireWire port
    G: graphics processor (GPU)
    H: drive
    h: heat pipe (heat sink)
    L: liquid crystal display
    M: memory or the memory riser cards

    I would first install a monitoring app like Mac Fan Control of temperature

    http://www.CrystalIDEA.com/Macs-fan-control

    to see of you can find a bad sensor by reading the memory riser card.

    You have a MacBook Pro as indicated: MacBook Pro, OS X Yosemite (10.10.5)

    Since this is the Mac Pro desktop forum

  • 4SNS/1/40000000 error code: VDOR - 18.678 & 18.679

    MBP early 2011: I just ran the AHT twice, the first round gave me an error code of 4SNS/1/40000000: VDOR - 18.678, second inning gave the code 4SNS/1/40000000: VDOR - 18.679. Does anyone know what are these error codes? My best guess is probably the RAM, I have (2) modules of 8 GB 1600 Mhz DDR3 OR wireless networking equipment installed. I've noticed recently while multitasking, the wifi connection seems to cling and web pages will not load/downloads will pick up. But the way in which applications will be blocked for 60 seconds makes me think of a bad situation of RAM I have had in the past. Any help would be greatly appreciated since the nearest bar genius lies in 2 1/2 hour. Thank you!

    No RAM - 4SNS is a sensor error.

  • Transcend Jet 360 Lite SD care & "the operation cannot be completed because an unexpected error occurred (error code - 50)"

    Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014.  Installed their wake from sleep early support software.

    Above error code invite you in this context: I wake up Mac in the morning after sleep.  Transcend icon "wake up" and appear on the desktop (as it should).  I check disk utility and the card is recognized.  HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code?  For about a week I missed that everything seemed normal.  My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay.  90% of the time when I remove and reinsert the card, the operating system recognizes, all right.  (There are a dozen times when I had to reboot for it to be recognized.)

    All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL).  This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution.  FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences.  Thanks in advance!

    This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

  • Error code: sec_error_ocsp_unauthorized_request

    I'm NOT going to be nice. Here's the description - I disabled the option "question responder OCSP servers to confirm the current validity of certificates. Has no effect. Still, I get this error:

    An error occurred during a connection to * removed * .com. The OCSP server refused this request as unauthorized. (Error code: sec_error_ocsp_unauthorized_request)

       The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
       Please contact the website owners to inform them of this problem.
    

    You... don't even leave the website to load. Try again. Try again. Try again. Try again. Try again. Try again. The certificate of the site is very well as evidenced by SIX different sites of the verification of the SSL certificate. I can't add an exception because FF is unable to obtain the certificate.

    I tried to clear all - cache, cookies, history, blah blah blah

    I am so bored of you people cost me more time.

    It's fine in IE and Chrome.

    If I didn't need Firebug, I would switch to Chrome right now.

    edited because of the language according to the rules-forum-guidelines

    You're right, it is not sensible.

    Never made an exception for the site.

    FINALLY, what worked was rename the cert8.db file in the profile folder so FF could generate a new. Then FF grabbed the cert very well.

    Thank you for the help, sorry for the earlier rant.

  • 4005 and 4013 error codes

    Air, 16G iPad. tried to install the latest iOS update. ultimately received 4005 and 4013 error codes. What do these codes mean and how can I fix the problem?

    Try troubleshooting on this page: If you see 9-4005, 4013, 4014 error when you restore your device iOS - Apple Support

  • Suddenly MSEssentials 0x800703eb error code is after the recent installation of firefox 4. Any connection possible? no other recent activity or facilities

    MS Security essentials is coming with "your pc could not be analyzed" error code 0x800703eb. This occurs the day after the installation of Firefox 41 with no other facilities important program or activity for some time. We had no other software security for several years, which doesn't seem like a cause as possible. Any ideas or suggestions? Others noticed and reported similar problems?

    Thanks for any help
    Hans

    Hello

    So far, 41 Firefox installation is clean. Because your question is related to Microsoft here certain Threads are related to your problem. At the same time you can contact Microsoft Support

    I hope this helps.

    Thank you!

  • Error code: How can I get an item in the Recycle Bin?

    I can't put a webarchive into the trash.  Error message says, "the operation cannot be completed because one or more required elements was not found (error code - 43) how can I get the item in the Recycle Bin?

    reset

    then try again.

  • How to fix error code 22 on iphone 5 s?

    Hello

    My phone is iPhone 5 s 16 g and I just finished upgrading my operating system iOS 9.3.4. After updating because when I was upgrading my PHONE when it was still in lower versions that he deleted files, music, photos and other downloaded etc. apps which is I think normally during the upgrade, but then when the latest version (iOS 9.3.4), it didn't remove a single file. I just wondering and I wanted to ask if this is really what happens when upgrading to the latest version of the operating system? My other question is what you mean by error code: 22? I tried to connect to my facebook account (it is after the upgrade), when I press the log in a pop out window and say "will record in Failed" and talk about the error code 22. How can I possibly fix it immediately because I can't use my apps if that happens?

    I haven't done any troubleshooting yet because I don't really know what to do.

    We hope to receive an immediate response to this topic.

    Thank you.

    Carmel Burgos

    Hello Carmel, to answer your questions:

    (1) iOS updates should not delete all data on your phone, the system is updated but nothing else changes. All data and settings should remain the same. This is the normal behavior.

    (2) to find mistakes Apple checkbox. However 22 is not there. 21-23 can help:

    Get help with iOS update or restore errors - Apple Support

    (3) for the Facebook app, you may need to contact Facebook because that's their problem. Alternatively, you can delete the app, reboot the phone and re-install the application. This works for many. Good luck.

Maybe you are looking for

  • Video metadata not retained when exporting

    Hi all I have 720 videos that have been reencoded a few months ago to save space and metadata has been erased in the process. I manually changed the metadata for each file one by one in photos.app through the command to change the date and the place.

  • HP first and true variable E

    HP first and true variable E Home view example 1: 0.1 enter Sto Alpha E Enter 8 alpha E X ERROR: invalid exponent number Press OK example 2: 0.1 enter Sto Alpha E 8 * enter alpha E .8 example 3: 0.1 enter Sto G Enter alpha 8 G .8 Why doesn't the firs

  • Re: Satellite A200 with Windows 7 - the problem with the card reader

    I upgraded to windows 7 and now my card reader does not read some of the maps. I installed windows vista (utilities SD) card readers drivers but I can't install the flash cards support utility. in the installation is displayed: "serial number is inva

  • pair to look after missing mark enabled

    I thought I had lost my watch so I clicked on mark as missing on my phone. Then, I found my watch and cannot pair.

  • insatlleation & configuration of exchange 2010

    I want to implement exchange 2010 with the installation of the role of all servers and one server as a ha. I don't want to use any hardwrae load balancer. So how do. I have 2 ibm Server & server 1 announced