0x800F0826 error code when you install Windows Vista Service Pack 1

Similar Questions

• Error 80073701 when you install Windows 7 Service Pack 1

  I met an error code 80073701 when you install Windows 7 Service Pack 1 and it could not be installed in my PC.

  So, what should I do to solve this problem. Thank you very much!

  Hi Charles Leung,.

  It is sufficient to indicate the complete error message you receive?

  Method 1: Run the Windows Update troubleshooting tool, then check

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2:  Download and install the update the system tool

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

• ERROR_NOT_FOUND (0 X 80070490) when you install Windows Vista Service Pack 2

  ERROR_NOT_FOUND (0 X 80070490)

  I tried and tried again to install Windows Vista Service Pack 2 x 64-bit system, but this error message keeps popping up. I tried to search for possible solutions, but they all tell me I have to use my Vista DVD. But there is a problem, I don't have it. I mean, that is, the gateway factory pre-installed Vista on my laptop, so I don't have the DVD. Is there anyone who can help me? THNX.

  Hi Jason,

  You can try the following solutions.

  Step 1: Download and install the system update readiness tool to run a single analysis for inconsistencies that may prevent successful installations of Windows Update.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Step 2: Try to install Windows Vista Service Pack 2 now and see if it helps.

  Learn how to install Windows Vista Service Pack 2 (SP2)

  See also:

  Windows Update error 80070490

• 0x80000FFFF error code when you install Windows Vista SP1.

  Original title: I had a problem with service pack 1 on vista 32 bit [allways should I install

  I had a problem with service pack 1 on vista 32 bit [allways should I install on the window update

  Try this Fixit MS

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414#letmefixit

• When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  Hi Gore EzekiahTongun

   

  You can see the steps in the below mentioned article Microsoft and verification.

  http://support.Microsoft.com/kb/947366

   

  I hope this helps.

• Error message! OXC190036! 4319/76322 (mscorsec.dll) after you install Windows Vista service pack 2

  I tried to install Windows Vista Service Pack 2 last night (after it has automatically updated several days ago) and it appeared to get 100% up-to-date point and he said of without shutting down your computer.  I left the computer for a while and I think it has restarted and it got stuck on this message! OXC190036! 4319/76322 (mscorsec.dll) for about 2 hours before I turned it off.  The message is still there when I try to restart and recovery mode is not able to help. Any suggestions? (It's a HP laptop on a 1 1/2 years and ran very well until now)

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• 0x8007045D error code when you install Windows 7 Pro 64-bit

  I get an error 0x8007045D code when installing Windows 7 Pro 64 bit on the same same MSI 970 Gaming (AMD SB950 Chipset 970 +) motherboard, even OEM Win Pro SP1 7 X 64 dvd, the installation on an EVO of 840 Samsung 250 GB SSD.

  16 GB of Ram (4 GB X 4 stix. Ran this OS on this forum for a year, trying to do (was) a clean install. I am puzzled, never had a problem like this.

  I was the installation of the operating system, and you're right, when he was on the 2nd works. He remained at 0% for a while then I get this error message "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. 0x8007045D error code.

  Someone at - he already had this?

  Any help would be appreciated.

  Thank you

  Try to reduce the amount of RAM installed on a unique key and try again.

  If you have several hard drives attached, disconnect all except the disk target hard.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Windows 7 memory 0x002bbb0 error code when you install Windows USB manager?

  When trying to install Windows USB Manager I memory could not be written.

  Then it gives me this error 0x002bbb0 code?

  Any help would be great! Thank you

  Hello

  Check the links below.

  http://Windows.Microsoft.com/en-us/Windows7/preventing-low-memory-problems

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  Hope this information helps.

• 00000646 error code when you install windows updates and upgrades security for the windows desktop.

  When I try to download windows office updates and security of office windows dates I get an error code 00000646. I don't use windows desktop and I did not sign up for the windows desktop. could this way is not not the administrator of windows on my computer desktop, this is the reason why I can't download these dates?

  Hello

  Here's what I recommend:

  1 disable UAC. Down comes the restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications.
  6. follow step 3.

  Let me know your results.

• 80070490 error code when you try to update service pack 2

  try to update vista (not preloaded on computer so no seprate disk) get this message when trying to install the update need help to repair as soon as possible as Ive noticed that helps ends after the 13th for people who have not updated

  Thank you very much, Lee

  no anti-virus at present

  Yes already expired norton 360

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Note: The manufacturer was required to provide a way to reinstall Windows. If a set of disks came with the computer, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install. Contact the manufacturer for guidance.

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck. Wish I had better news for you.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install windows vista service pack 1, 57 gives error code

  When you install windows vista service pack 1 that it says code 57 Windows update has encountered an error can someone help please?

  Hello

  (1) what is the exact\complete error message you get?
  (2) remember to make changes to the computer before the question?
   
  See the methods mentioned below and check if that helps.
  Method 1:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  Method 2:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
   
  Method 3:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Hope this information helps.

• I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

  error 8007090

  I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem

  Hello

  Are you sure this is the error Code?

  And not this one?

  It is the opinion of Microsoft about the error code 80070490.

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821

     (http://support.microsoft.com/kb/947821/)

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

  "This has occurred as soon as I updated from Windows XP"

  You have the upgrade DVD?

  Here is a tutorial on how to do it:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• When trying to install windows vista service pack 2 I get this error: "Element not found" (0 x 80070490)

  Cannot install windows vista service pack 2

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Windows Vista and Windows Server 2008 to solve this problem, you must perform a repair of Windows Vista or Windows Server 2008 installation. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair of Windows Vista or Windows Server 2008 installation, follow these steps:

  1. Close all applications and restart the computer.
  2. Insert the Windows Vista DVD or Windows Server 2008 DVD into the DVD drive of the computer.
  3. In the settings window, click install now.

     Note If Windows does not automatically detect the DVD, follow these steps:

     1. Click Start
        Collapse this includes this image

        

        and then type Drive: \setup.exe in the box start the search .

        Note The placeholder drive is the drive letter of the computer's DVD.

     2. In the list of programs , click Setup.exe.
     3. In the settings window, click install now.
  4. Click connect to get the latest updates for installation (recommended).
  5. Type the CD key if you are prompted to do so.
  6. Click Yes to accept the Microsoft software license agreement.
  7. On the which type of installation do you want? of the screen, click upgrade.
  8. When the installation is complete, restart your computer and try again to install updates.

  If the above does not resolve the problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't install windows vista service pack 2, receive the error code 490

  Tried to install Windows Vista service pack 2. (KB948465).   Received: Installation failed.      Also: element not found.      Error: ERROR_NOT_FOUND (0 x 80070490).     and finally the code 490 - Windows Update encountered an unknown error.

  Hello

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

• Error codes when you use windows update 0 x 643

  Error codes when you use windows update

  Received error code 0 x 643 during the installation of update for Visual C ++ 2010 (KB2467173). What should I do?

  Hey Joe,

  You can check if this article helps.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update