1.5 TB in the store data but only 850 GB configured, there are increases of 100GB

Similar Questions

• upgrade to ESXi 5.5 to 5.5 U2 on a new flash drive. Kept the store data but finding no VM rescan

  Our flash drive went ill at 5.5 U2 on a new flash drive, I installed and made sure the data store was not touched. On exploitation forest back in vpshere that I see our host and I can see the data store but when I choose a new analysis, it's over in a second and no VM appear. I'm waiting for a call back from VMware as I a case of open pension but over time, I expect I thought I'd post here to see if I can resolve it more quickly.

  FYI, when I right click and 'Browse' the VMDB I can see all of the folders in the VM

  

  If you have a new installation of 5.5 U2 not an upgrade, correct?

  Go to the place in your screenshot host-> Configuration-> storage and do a right click on the data store and choose 'Browse the data store' in the menu.

  Cross each subfolder of the VMs real and right click on the . VMX file (this is the VM configuration file) and choose "add to inventory" in the menu.

  Do this for each VM on the data store.

  cykVM

• RAM is not visible, I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS. All the 4 sticks of RAM are the same brand and compatible with my motherboard.

  I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS.
  All the 4 sticks of RAM are the same brand and compatible with my motherboard.
  I'm running Windows 7 Home Premium 64 - bit, which limit memory is 16 GB, so this isn't the issue.
  I got a few BSOD - 0 x 00000109 - errors that I work.
  I ran memtest86 for a few hours and he scored 4 errors during test cycles 7.
  These memtest errors concern the bars invisible RAM or the work those?
  Any ideas as to what should I do next?
  See you soon!
  Data sheet:
  Windows 7 Home Premium 64-bit
  Intel Core i7-3820 @ 3.6 GHz
  ASUS P9X79
  GeForce GTX 650
  Team elite Dual Channel DDR3 4 GB 1333 Mhz x 4

  Thanks Joel,

  I started to individually test RAM when I noticed a quirk in the way they were organized in their locations.
  I downloaded the manual for my P9X79 and he confirmed that they were arranged in mirror mode.
  I switched two of the sticks to adjacent slots and, Lo and behold, the full 16 GB presented at startup.
  So that's one mystery solved at least.
  I'll raise the memtest to see if it includes several errors and if so will continue to individually control the RAM sticks.
  Thanks again.
  Nick

• on Windows pc, I don't see a folder 'My Photo Stream', I think that all the photos are in the download folder, but when remove it from there, the status is not replicated in icloud. Help, please.

  on Windows pc, I don't see a folder 'My Photo Stream', I think that all the photos are in the download folder, but when remove it from there, the status is not replicated in icloud. Help, please.

  Hi vibenas,

  If you plan to use iCloud photo library with your Windows PC, article below the setting Details link and use this feature.

  Set up and use iCloud photo library on your Windows PC
  https://support.Apple.com/en-us/HT205323

  Sincerely

• When I try to buy a book, it seems it download but does not work. If I am able to get a sample and try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

  When I try to buy a book, it seems it download but does not work. If I am able to get a sample & try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

  Mine just did the same thing. I've even went and was sold again in case I did something wrong the first time. Still no book! I had to happen a few weeks ago, but when I closed iBooks and reopened, the book was there. This time that didn't happen.  I prefer to read on the iBook, but I'm not if my books download

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, that I tried to close all pages open and it started making a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, I tried closing all open pages, and he started to make a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hello

  Looks like a hardware failure.

  Try to reinstall the operating system:

  It comes to the use of the Asus restore procedure.

  http://www.ASUS.com/support/FAQ/1006133/

  See you soon.

• I deleted my email account and tried to add it back, but it is said that there are already. It drives me crazy...

  I deleted my email account and tried to add it back, but it is said that there are already.

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available.

  I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available. where is the rest of the memory?  Its not partitioned to another eather drive

  original title: hard drive problems

  (1) what does your BIOS the drive size?

  ============================================================

  2) disk hard test - find your make and model:
  Speccy - computer/system information in detail
  (More detailed look at your memory and CPU)
  OS, CPU, RAM, card, graphics, hard drive, optical drive
  Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ================================================================

  (3) HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  -Partition management utilities-

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• RDM use space on the store data or SAN

  Dear all,

  According to my understanding, RDM creates a mapping file in the data store in the folder of the virtual machine, but it consumes all of the space on the data store, but yes, on SAN. I have a virtual machine with 50 GB vmdk and a physical RDM 50 GB, the machine's memory is 8 GB so vsphere client, seems space put into service for machine to 108. So it means that 50 GB of RDM is also included in funded space shown in vsphere client.

  The same look at space of data store, the space of data store configured showing also 50 GB RDM counted in the space provided, where, as the data must be on the SAN, can someone explain why in the data store space calculation as rdm as space accrued on himself.

  Please let me know if my question is not clear.

  Thank you

  As the rdm file uses no space disk (only a few bytes of the header/descriptor file), the disk space is still available for other virtual machines.

  André

• Insert a line containing the same data but repeated for each foreign key availabl

  So I use Jdeveloper11g.
  
  I have a question where I have 2 tables, shops and rooms. Rooms now has a foreign key StoreId, which corresponds to the primary ID of stores and they are connected in a relationship 1 to many. Now I have over 600 stores. And only 2 have all the pieces that were (the building which is not even a main store in most of the rooms). The rest are not, but what I need is to assign to each store with the same name room1 1 room.
  
  So the name would be the same, the primary key could get it I hope some sequences, but the foreign key ID, that StoreID field would have to change and insert for each store.
  
  Is there a way to query sql for this type? Any means which is not manually create a 1 room, then assign to 1 store and repeating the process 600 times?
  
  Thanks in advance

  Hello

  It looks like you want

  INSERT INTO rooms (roomid, roomname, storeid)
  SELECT  roomidseq.NEXTVAL
  ,     'room1'
  ,     storeid
  FROM     stores
  ;
  

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results desired from these data.
  In the case of a DML (such as INSERT) operation the sample data should show what look like the paintings before the DML, and results will be the content of the or a modified tables after the DML.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).
  See the FAQ forum {message identifier: = 9360002}

• ORA-01436: CONNECT loop in the user data, but CONNECT_BY_ISCYCLE is equal to ZERO all the

  Hello
  
  When I run query below, it always throws the below error:

  SELECT connect_by_root code AS code_root,
      CODE,
      CODE_DESC,
      UP_CODE 
    FROM DI_CODE_LEVEL
    WHERE TYPE_CODE='SP'
      CONNECT BY PRIOR CODE=UP_CODE;
  
  ORA-01436: CONNECT BY loop in user data
  01436. 00000 -  "CONNECT BY loop in user data"

  But when I use NOCLYCLE and CONNECT_BY_ISCYCLE to see which line is in question.
  It shows nothing, which means CONNECT_BY_ISCYCLE = ZERO for all rows.

  select * from (
      SELECT connect_by_root code AS code_root,
          CODE,
          CODE_DESC,
          UP_CODE ,
          CONNECT_BY_ISCYCLE AS ISCYCLE
        FROM DI_CODE_LEVEL
        WHERE TYPE_CODE='SP'
          CONNECT BY NOCYCLE PRIOR CODE=UP_CODE
      ) 
  where ISCYCLE>0;

  Is there another reason that sql would lift ORA-01436?
  If there is a loop, then will the combination of NOCYCLE, CONNECT_BY_ISCYCLE will show?
  
  Thank you

  Hello

  Apparently, one or more of the "SP" lines are at the origin of the problem.
  The WHERE clause is applied after the CONNECT BY is finished, saying:

  select * from (
      SELECT connect_by_root code AS code_root,
          CODE,
          CODE_DESC,
          UP_CODE ,
          CONNECT_BY_ISCYCLE AS ISCYCLE
        FROM DI_CODE_LEVEL
        WHERE TYPE_CODE='SP'
          CONNECT BY NOCYCLE PRIOR CODE=UP_CODE
      )
  where ISCYCLE>0;
  

  is equivalent to

  select * from (
      SELECT connect_by_root code AS code_root,
          CODE,
          CODE_DESC,
          UP_CODE ,
          CONNECT_BY_ISCYCLE AS ISCYCLE
        FROM DI_CODE_LEVEL
          CONNECT BY NOCYCLE PRIOR CODE=UP_CODE
      )
  WHERE    TYPE_CODE = 'SP'
  AND     ISCYCLE   > 0;
  

  To see where the loop occurs, you must include the lines where type_code = "SP".

  When you debug "ORA-01436: CONNECT IN a loop in the user data ', view SYS_CONNECT_BY_PATH (uk,...), where the United Kingdom is a unique key. That will tell you much more than just the root information. You might want this:

  SELECT  connect_by_root code                AS code_root,
          CODE,
          CODE_DESC,
          UP_CODE
  ,     SYS_CONNECCT_BY_PATH (code, '/')     AS path          -- For debugging
  ,       CONNECT_BY_ISCYCLE                AS ISCYCLE     -- For debugging
  FROM      DI_CODE_LEVEL
  -- WHERE TYPE_CODE = 'SP'     -- Commented out for debugging
  where      ISCYCLE > 0          -- For debugging
  CONNECT BY NOCYCLE      PRIOR CODE = UP_CODE
  

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements), and the results you want from this data.
  Explain how you get these results from these data.
  Always tell what version of Oracle you are using.

• Firefox is running in the Task Manager, but only opens a window.

  I can't get Firefox to open a window. I tried firefox-p (Profile Manager) and firefox-safe (safe mode), but nothing works to open a window. I uninstalled and reinstalled, but that solves nothing. I haven't changed anything recently, so perhaps there is a update (?) Here's what happens:

  I try to start Firefox, and the Task Manager indicates that Firefox is running. It employs about 32 k of memory, but the window never opens.

  I click Firefox again. Manager tasks indicates 2 Firefox process now. The second is to use about 4 k of memory. Running Firefox repeatedly adds additional tasks to Firefox, each using about 4 k of memory.

  After about a minute, the additional tasks of Firefox (the 4 k ones) start closing 1 by 1. I am now down to only 2 Firefox process, using 32 k and 4 k of memory, respectively. As far as I know, these processes will last forever, until I have shut them down manually. If I run Firefox again without closing the current process, it creates another 4 k process, which finally closes itself. If I close all the processes manually, I can start over from scratch. Meanwhile, Firefox never opens a window, or give a clue showing that it is running, with the exception of the processes listed in the Manager tasks.

  bdemmon said

  I deleted the one in my USER folder without change. There are a couple more in various C:\Mozilla\Firefox\Profiles files, so I deleted those too, without change.

  It's a custom location. Normally, the profiles are under AppData\Roaming, I think you already know. There is a shortcut:

  %APPDATA%\Mozilla\Firefox\
  

  This folder must contain a profiles.ini file (.ini file extension may be hidden), which shows the names and paths to your profile folder (s). If you check in a text editor such as Notepad, this file contains sound data?

  If this started right after an update, it could be a problem with security software, put an end to the commissioning (rules of program control) or program files has been corrupted.

  You can check your firewall and other security software for program restrictions.

  To meet possible corrupt files, I suggest:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (no incompatible or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (A) download a fresh Installer for Firefox 43.0 https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (B) the release of Firefox (if any).

  (C) to rename the folder of the program as follows:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (D) to run the installation program that you downloaded in step (A). It should automatically connect to your existing settings.

  A cleanly reinstalled Firefox starts up normally?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• I need to continually take data but only trend occasionally

  Hello. I'm new to LabVIEW and have been given the task of interfacing with a thermostat of LakeShore. My employer wants to my program to recover data continuously, but only to write the data to a file and a graph in a certain period. At this moment I VI data in a loop for which has a time delay inside and set the number of iterations that however many seconds or minutes to pass before it writes the data and then allow him to move on to writing to the extent of the file VI and the graph before returning to loop data. There must be a better way to do it with the timed structures or structures of event or something. My instinct tends to be to use a bunch of while loops for things, but I can't stop them with a button outside the while loop. Can someone help find a better way to go about this?

  I would use an Express VI elapsed time that drives a business structure where the "occasional code" is in the real case of the structure of the case.

• The Windows Easy Transfer of data application does not work if there are two windows of different language.

  I bought a data transfer cable and I tried to make a transfer of data from the laptop with non - English Windows XP Profesional a laptop with Windows 7 Home via WINDOWS EASY TRANSFER viz English.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer
  but I was surprised that I got a message "that a different language to the windows version has been so that data transfer can not live there. And above all, there was a message "that the data cable has not been detected."
  Microsoft is working with so many language versions, then why this simple problem is not solve upward? It cannot be too big problem to compensate for a versatile application that would work on all versions of Windows.

  No, it doesn't work of course between the various language versions, has never and will never be.  Will not be fixed either, because Windows XP is in the extended now support (only security patches issued) and becomes entirely non supported in about a year.  Save and move documents using a different method.