1 copy of Labview Basic running on 2 PC

Similar Questions

• A copy of LabView for Linux.

  Hi, I recently bought a copy of Labview 2009 through my University, and I was wondering if there was anyway I could download a version of linux-flavored.  In making the switch, I'm currently dual-boot Windows/Linux, but is intended to run 100% linux.  In any case, since I have a Student Edition, I wasn't sure what the terms were accurate liscensing, or if I could have installed on my linux and windows partition, or even if I would have access to all features from the Windows version to linux.  I read somewhere on your site for the business Edition, you can have up to 3 business computers and 1 computer at home, but can only be running one version at a time.  Because the way I'm in dual boot, it would be possible to have a version running at once, not two virtual machines running on my PC.

  Any input would be helpful,

  -MechanicalMayhem

  Contact the local branch of National Instruments; the sales representative should help you to get a copy. I think you should be OK legally but don't forget to confirm.

• There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  Hi, I m a bit new in LabVIEW and I'd like to ask a few questions...

  -There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  -One API PI or raspberry beaglebone exists for LabVIEW?

  -Power supply Wich can recommend you control with LabVIEW? (some chip solution witn 0 - 30v / 0 - 3A DC)

  Thank you very much for your advice!

  Best regards

  Elena

  Elena,

  I know raspberry, so no comment on that.

  For the rest:

  -Do you want to create tools for developers? If so, we must look in the API of project VI and VI server. If this isn't the case, please compile your application LV as executable and call this one using a batch file.

  -LV prefer specific supplies. LV is a programming language. There are several power supply providers (including OR) which provide directly the LV API for their power supplies. So, essentially, the approach is:

  1. choose food that serves your needs.

  2. check if the power supply has a standard interface for programming (such as Ethernet, GPIB, or if the power supply is PXI, is already providing a programming interface!)

  3. check if the LV API (so-called "instrument driver") is available for the device. In the case of a PXI system, get you a device driver (for example NI DCPower).

  4. check if the LV samples are available (for example in the Finder for example LV once you have installed the driver).

  Norbert

• LabVIEW 2011 Run time engine installation issue

  I try to install Labview 2011 Run time engine as downloaded here: http://joule.ni.com/nidu/cds/view/p/id/2534/lang/en

  on my laptop Windows 7 Pro. I have the hard drive shared in the C and D drive with plenty of space on each.

  Initially the office IT guy tried to do the installation as an administrator and for some reason any installed at "D:\Program NIUninstaller Instruments\" for some reason any. He went through the installation without error, but after restarting, it seems that some of the components are installed. I never installed anything else OR on this computer, but after installation I see NI License Manager and Datasocket under National Instruments in the start menu. If I re - run the installer it seems to think that everything is installed and there is something to remove, but it is obviously not.

  Subsequently the computer gave me administrative privileges on my account so I have been playing with various combinations of uninstall and reinstall myself but with the same result each time.

  Any ideas would be very appreciated.

  Hi Robert,.

  you have installed the RunTimeEngine.

  What else you expect to see in your Start menu after doing? What's missing?

• Free LabVIEW Basics and Introduction course deleted, moved or missing?

  It can be very nice tutorials FREE Labview under: http://sine.ni.com/nips/cds/view/p/lang/en/nid/10647

  Use an area called OR training / tutorials

  1. Free training material:
     • Online LabVIEW Basics
     • LabVIEW Introduction course - 3 hours
     • LabVIEW Introduction course - 6 hours

  Does anybody know where they went?

  -SS

  So the corrected links are:

  Online LabVIEW Basics

  LabVIEW Introduction course - 3 hours

  LabVIEW Introduction course - 6 hours

  -SS

• How to read the tag bluetooth data in labview 2015 running on Windows 10

  Hi all

  I have a Development Board Nordic semiconductor nr51. This card is programmed as a tag bluetooth which simply announces his address with 16 bits of data appended to the end.

  My laptop came with loan materials smart bluetooth. I installed an app interactor lighthouse to bluetooth on my laptop and the software is able to detect the tag as if shown on the image below.

  

  I wanted to write a LabVIEW program that will simply be careful bluetooth headlights and notify me in my computer every time a lighthouse with the specified address is detected. This mobile application below is provided by the manufactuerer of the Board of Directors and I wanted to develop a LabVIEW program something similar to what will read the given data and extract values.

  

  Somehow, all the sample applications provided data only shows how to read and write in a connected bletooth device but not analysis for tags. I also tried using the Bluetooth ' discover ' and it does not detect the bluetooth beacons.

  Could someone provide me with the necessary information or example program for detecting / reading of tags bluetooth in LabVIEW 2015 running on Windows 10?

  Do I need to install a third-party software to read data from bluetooth?

  Bluetooth in LabVIEW function nodes using the Winsock interface to access bluetooth resources. This works very well for Bluetooth 2.0 devices but not Bluetooth 4.0 devices WHEAT aka. Microsoft has created a completely different interface for these resources API as the model of overall service for WHEAT devices has radically changed.

  The API to use WHEAT devices is the API of the GATT (generic attribute profile) in Windows. There is supposedly a .net interface available that you can try to use (Windows.Devices.Bluetooth.GenericAttributeProfile). The WinAPI to lower level (https://msdn.microsoft.com/en-us/library/windows/hardware/hh450825(v=vs.85).aspx) is a C DLL API and does not lend at all to be called directly by the LabVIEW call library node, since some of the parameters of the function are quite complicated and you need to also access the SetupDI APIs to enumerate resources WHEAT and even harder to function parameters. In order to access this low-level API to write an intermediate DLL which results in low level API C a more acceptable API for LabVIEW.

  Another possible problem is that Windows don't at least in Windows 8 not allows devices to pair per program. Microsoft wanted to force developers in the use of the "inbox" experience, which means that all users must go through Microsoft provided service pairing, instead of each request for implementation of his own matching technique.

• My hard drive crashed need to get a copy of Vista basic to re - charge on the new hard drive

  My hard drive on my Acer Aspire 5315 has crashed. I put in a new hard drive but I have not saved copy of Windows Vista Basic supplied with the computer. I need to know how I can get a copy of Vista Basic to recharge with the product key on my computer

  Contact them Support technique Acer and ask for a disk of Vista installation for your computer model. Boulder computer Maven
  Most Microsoft Valuable Professional

• Using VI Server to check whether another executable LabVIEW is running

  Hello to you all, helpful people.

  I need to have a single executable check LabVIEW if an different LabVIEW executable is running.  The simplest way to do seems to be to ask Windows if the name of the executable runs.  A good thread is here.

  However, this requires the use of a tool (task list) that does not exist on all Windows operating systems I need support (all flavors of XP, Vista and 7).  In addition, even if I found an equivalent for each OS, I need to make sure that they continue to work and update my program whenever a new OS was released.

  A much better solution would seem to be to use Server VI in LabVIEW, so it is cross-platform.  However, despite reading over my printed manuals, by reading lots of subjects in the electronic manual, scanning through the forums and make some limited looking for a manual on the Web site of NOR, I still can't understand the basics of the implementation of a communication server VI between two executables.  It's very frustrating, because I'm sure it's a simple task, but I can't find the right instructions.

  A lot of instructions to configure a server VI say to go to tools-> Options-> VI Server: Configuration and enable the TCP/IP option.  Which seems exaggerated, if I only need communication on a local computer, but ok.  However, in other places told me that this sets the default settings for the instance of the main application (another subject I am still unclear on), so how does it apply to my existing LabVIEW project?  My current project is an executable, and I thought I would create a new build for the second executable specification.  Executable has all my existing code, while B executable would have just a reference VI available server ping, in order for an executable say if it is running.

  So I built executable B, and I joined his VI for your reference.  Deciding that the VI settings programmatically server configuration will be more comprehensible, I put options that seemed logical: a unique TCP Port number listen to Active = True, TCP/IP access list = IP Address of my computer and the executable = B.vi VI access list.

  In my test executable A.i, which I use to this get up and running before changing my main code, I use Open Application references with the IP of my computer, the unique port number and a short timeout.  I hooked up to a property App node to determine if I get the correct connection.  All I really need is to check the name of the Application and I'm good.  However, I keep getting 'LabVIEW.exe.

  If anyone call tell me that I forget in this simple configuration, I would be very grateful.  Some basics on something else I'm missing about how works the server VI, how the tools-> Options from the settings relate to all, etc., would be a big bonus.  Eventually I'll need a way to specify no IP address of the computer (or a way to interrogate LabVIEW), so I can broadcast these two executables on any random PC.

  Thank you in advance for your help!

  -Joe

  P.S. in the preview window that all of my text has run together; I hope sincerely that is not happy when he published, in particular given its length.  If so, I apologize!

  The application ini file should contain the following line:

  Server.TCP.Enabled = True

  Not to mention that this is a better way to see if your inside an executable file:

  

  Tone

• How to debug the program Labview that runs in the target of the RT of a Compact RIO

  I use CRIO-9073 for the acquisition of data from sensors. Program Labview is written in RT target and target FPGA. It is posssible to make step wise execution for the program written in the target RT and FPGA target the way purpose us for the debugging of the program in general OS.

  MJM,

  The only way to use the debugging on a VI wrote to FPGA tools is to simulate running on the host computer. You can then deploy the compiled FPGA code on the target and run your VI RT in debug mode if you use the communication of the façade with the host PC.

• Pouvez LabVIEW DSC Run on embedded XP

  cross posted from LAVA

  Hello

  Anyone know if LabVIEW DSC works on XP embedded?
  These two positions are interesting: WinCE post post cRIO

  Concerning
  JG

  Hello jg-code.

  XP Embedded is not a supported operating system to run LabVIEW or the DSC Module development environment.  This does not mean that it won't work, only that we do not guarantee that it will work.  One of the reasons is that XP Embedded can be transformed into any variety of facilities.  The following link can provide useful information.

  Running LabVIEW on Windows XP Embedded

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4011

• I want to write the program in Labview which runs on PIC Microcontroller.

  Is there some toolkit or similar, which will allow me to write code for micro PIC (10F or 12F)?

  In fact, I believe that the LabView embedded only works with specific processors and will not work with 8-bit images.  Yes, serial to transfer data instead of writing code to run on the controller.

  Kind regards

  Joe S.

• How to use my 2012 LabVIEW for run the LeCroy Waverunner 610Zi?

  Hi all

  I'm a fresh starter on this topic. I have the 2012 version of LabVIEW and a scope of 610Zi LeCroy WaveRunner. How can I use LabVIEW for control the scope?

  Hello sqrtT,

  I think you and I just had a phone conversation about this, and you're all set!

  I would like to know if I'm wrong and I'll give you instructions for you.

  See you soon,.

  Leonard Brown

  Technical sales engineer

  Teledyne LeCroy

• LabVIEW Basic Questions

  Hello

  I have 2 Questions:

  I want to draw a few plots like this: http://elektroniktutor.de/bauteilkunde/bt_pict/trkennl.gif

  now all my parcels have the X in the right position. Can I turn to the left?

  If I cancel the side looks ok but the legend of the X X won't (because its negative results).

  I have haave seen OR often in the programs that they have a stop and run button.

  How can I implement this?

  the program runs all the time... with start I start the task and with stop I complete the task (but the program will still work)

  I have only yfound the Funcction 'Stop' but it cancel the entire session.

  Hey crossrulz beat me to it.

  Back to posters questions.  Yes, do not what you code does.  Try what I've attached.  It is your program with some improvements.  I think that the feature must be the same.  Just click Run once.  Then, when you want to run, click on the Start button.  To stop click the stop key once again, or if the condition is met that normally would stop the VI arrives, it stops on its own.  Also, to stop the application click on the close button (the X red) as a normal program.  Of course if a test runs that the judgment will be ignored until the test ends.  You can add your own test button to give up if you wish.

  Any other general comments.  Do not use the dynamic data types, do not use screw express and DAQ Assistant.  Do not make the block diagram have to scroll in more than one direction.  Do not run continuously.  Do not use the button of toolbar to Abort VI or primitive.

• copy a LabView VI of dev system to another system of dev?

  We have two systems of development here.  I need a VI that is on the other system.  How the VI of a development system for the other system of development?  Do I need to deploy?  Or can I just copy it?

  Thank you

  Steve

  Just copy it to.  Make sure you have all the subVIs that it could possibly call.

  And if these systems are the same, I recommend two networking all systems and use software (like SVN) source control to preserve synchronization codes.

• I started to learn about labview basics. Some help on the fill level sensor,

  Question

  Provide information. What you want to do labview.

  If the serial communication to assure the communication of information.