copy a LabView VI of dev system to another system of dev?

Similar Questions

• 1 copy of Labview Basic running on 2 PC

  Hello

  You can buy a copy of LabVIEW Basic and install on 2 PCs, the first PC would develop the code for the second PC, which would be its only goal. The second PC would act as a PC of collection in a test configuration.  If this is not possible, I would need to take the PC down to the data collection, make changes.

  Thank you.

  Alan

  ajmartin wrote:

  Setting up right now is super simple, 6008 DAQ 24 digital lines of monitoring.  ONs and hate of course!

  OK, you should be able to use simulated on the development of PC devices to test tracks.

• A copy of LabView for Linux.

  Hi, I recently bought a copy of Labview 2009 through my University, and I was wondering if there was anyway I could download a version of linux-flavored.  In making the switch, I'm currently dual-boot Windows/Linux, but is intended to run 100% linux.  In any case, since I have a Student Edition, I wasn't sure what the terms were accurate liscensing, or if I could have installed on my linux and windows partition, or even if I would have access to all features from the Windows version to linux.  I read somewhere on your site for the business Edition, you can have up to 3 business computers and 1 computer at home, but can only be running one version at a time.  Because the way I'm in dual boot, it would be possible to have a version running at once, not two virtual machines running on my PC.

  Any input would be helpful,

  -MechanicalMayhem

  Contact the local branch of National Instruments; the sales representative should help you to get a copy. I think you should be OK legally but don't forget to confirm.

• How to create a stand-alone executable in LabVIEW 2009 Professional Development System?

  How to create a stand-alone executable in LabVIEW 2009 Professional Development System?

  This should help you http://zone.ni.com/devzone/cda/tut/p/id/3303

  Remember that the quick search with Google in many cases will be quicker to ask in this forum. I always use Google before asking for help in any forum. It is much faster

• Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

  Original title: problem to copy content from your PC to external hard drive.

  I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

  Concerning

  Pete

  The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

  I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

  If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

  It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

  It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

  I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.

• Copy of complete site. I have a Web site. I would copy the entire site (complete with images) to another directory with a different name. Then, transfer to another hosting server. All ideas

  Copy of complete site. I have a Web site. I would copy the entire site (complete with images) to another directory with a different name. Then, transfer to another hosting server. Any ideas?

  Not sure that you need a different directory.

  If you are working on a local computer, create a new site with all the same settings for local files and change the remote server settings to match the second server.

  This ensures you that there is no difference between the two websites.

• Copy the contents of the one textframe to another

  I have a 2 documents, I want to copy a textframe fully formatted content to an another textframe in another document.

  I have two textframe objects.

  I tried to create a textframe temp and move the images in question, but he have attached, XML tags which is coppied in the document when the temporary framework is created.

  any thoughts?

  see you soon

  jsx

  Hi D Jon Simcox

  Why don't you use

  
  

  parentSourceStory.duplicate(LocationOptions.after, destTextFrame[0].insertionPoints[0] );
  

  Without the help of 'paragraphs.everyItem '?)

  Don't see the need.

• How to copy a layer and its mask layer to another image?

  With the help of PSE9, how a copy a layer and its mask layer to another image?

  Online Help includes a topic on how to copy a layer but try the different methods in the help topic results in either nothing copied or just the layer without his mask layer is copied.  Thank you.

  How did you get a copy?  If you float your images so that they are both partially visible in the work area, make one with the being copied the active layer.  Then, drag the layer in the layers palette on the other image.  Now you should have both the layer mask on the second image.

  Jürgen

• Can I copy the contents of a form field to another field with toggle checkbox?

  Would it not possible to copy the contents of a form field to another field in the form once a checkbox is disabled?

  I have several form fields that require form-fill to enter their initials.  Rather than repeat this 20 - 30 times on a form, they would like to be able to write their initials somewhere and that their initials copy in another form with a checkbox Toggle field.

  So, I have a field called 'initial' and each of the original boxes are "init_entry1" "init_entry2" etc.

  The boxes for these areas are "check_entry1" "check_entry2" etc.

  This would be possible with scripts?  Or are there better ways to accomplish the initial AutoComplete with a checkbox toggle?

  You can use a code like this in the MouseUp event of your box:

  If (getField("Check_Box1").value! = "Off")

  getField("Text2").value = getField("Text1").value;

  else getField("Text2").value = "";

  Of course, you have to adapt the names of the fields.

• Copy selected messages sent from one system to the other

  When I was on vacation, I used a laptop computer to send and receive e-mail. I said TBird not to delete the mail incoming server, so I was able to get it later on my home desktop system.
  But the mail that I sent is only on the laptop; is it possible to copy certain messages sent from the laptop to the folder "sent" from the desktop?

  you have got it.

• Problems with labview on TestStand deployment system (usually run without a license of labview)

  I'm trying to deploy a system using testStand for a machine of deployment for the 1st time. I built my Installer and image etc files The files of the installation on the target however machine when I try to run my program in mode operator TestStand I get errors relating to Labview. The only way I can work around this error is to activate a Labview license on the deployment computer, is not viable.

  The error I see when I turn off my Labview license simply indicates that an error has occurred accessing the Labview ActiveX automation server.

  I have included engines of execution etc. in my Installer. As this is my first build is there something obvious I've missed here?

  Thanks for any input.

  Vinny

  Vinny,

  My first guess is that the setting of the LV adapter on the deployment computer is always set to "LabVIEW development environment". You must change this to "runtime".

  hope this helps,

  Norbert

• Fingerprint memory for the LabVIEW 7.1 development system

  Hello

  I would like to know the size memory for LabVIEW 7.1 full development System.Both during the installtion and to develop applications later.

  If anyone can help. Thank you.

  There is no one answer for this, as this varies considerably.

  For what is on the disk, if my memory serves, the 7.x base takes a few hundred MB, but which could greatly inflate according to the modules and drivers you add.

  For the RAM, I believe than 7.0 used to identify approximately 20-50 MB immediately after loading, but this number then would also change a lot over time depending on what you are doing. Loading, editing and execution of code just regularly change the amount of RAM used.

  Why do you ask? Also, are you aware that 7.1 is relatively old now (came out 7 years ago)?

• LabVIEW Professional 2012 development system

  Please provide us the link to download 2012 LabVIEW Professional Development System.

  Look here:

  http://download.NI.com/evaluation/LabVIEW/ekit/other/Downloader/

  Search for files beginning with "2012sp1LV" and pick your flavor.

• Is it possible to set the clock windows o/s with a labview 8.5 program system?

  I am interested in setting the clock windows o/s system of a program 8.5 labview, is it possible?

  If you are on windows, control time will allow you to set the time. You can use exec system in labView to do this. For more information about the command:

  http://www.WikiHow.com/change-the-computer-time-and-date-using-the-command-prompt

• LabVIEW base, protocols supported system of development and the basic features

  Hello

  I ask this question here because I can't find that information on the web, or I get the technical support e-mail response. We are interested in acquiring a license of basis of Labview to start development to develop test for simple automation systems. The basic idea is to have a card with digital, analogue i/o, common seria interfaces: RS232, Ethernet, I2C or SPI. All this to interface HW under test.  A single port for communication with the PC (USB, Ethernet, RS232).

  We would like to know:

  (1) what protocols are supported by the Labview Base development system package.

  (2) if the license mode allows you to integrate MATLAB/C/C++ code.

  (3) in general, where a document that provides details on the characteristics of the Labview. We were not able to find a manual for it. Just this very basic with informaton purchase link: http://sine.ni.com/nips/cds/view/p/lang/no/nid/1385.

  Kind regards

  Jose

  Have you looked at the page 'Buy' for LabVIEW? http://www.NI.com/LabVIEW/buy/

  Basically, I think that LabVIEW base supports everything in terms of basic Windows protocols, but does not include LabVIEW RT or FPGA (for CompactRIO/FPGA targets) but you can use series, ethernet, etc. DAQmx for windows (and also the instrument 3rd party drivers). It doesn't have the enhanced math library or the application Builder so that you can not create executables/installers - you will need run your code in the development environment.

  Alternatively, you can call external code .NET / C dll through the call library function node. You will not be able to incorporate Mathscript, because it is only in the complete edition upward.