1 LUN / VM/client?  surely not?

Can someone point me to best practices or advice me why not for this that I find it difficult to convince another team to my not to do.

They are more concerned by the IO on head when taking snapshots via IPstor.  I said no not to use a LUN by guest because it's useless, virtual machine snapshots could fill a LUN and cause the prompt to fall, but I don't know how to get more than there are i/o.

Anyone got any solid information that I can throw at them?

Thank you very much

It's the VMware white paper on storage performance planning which solves the following problem:

http://www.VMware.com/files/PDF/scalable_storage_performance.PDF

'S done it to make management more difficult to consider putting a small number of virtual machines in each LUN.  Implementation of a general policy of 1 LUN per VM for the whole of the environment I can't imagine how to find for any environment, and I don't think that a policy should be taken in this respect for even the busiest virtual machine.  Just as a first step, I would consider that drive C:/root of most of the VMs is not very heavily used as well as a general policy, several of them may be on a shared LUN for easier management.  It makes sense to put data into separate virtual disks of BONE usually, this is where you can start to consider placing less of these disks virtual together in a single LUN/VMFS or RDM volume according to the expected of each virtual disk data i/o load.

Tags: VMware

Similar Questions

  • Message: Cannot perform this operation because the default mail client is not properly installed

    I get the following error message:

    Cannot perform this operation because the default mail client is not properly installed

    Could someone help me please?

    Moved from the community involvement Center

    Hello

    You have a common problem of Windows 7. You must set a default e-mail program and Windows 7 did not come with a pre-installed email program.

    The default e-mail program must be installed on the computer - for example Windows Mail (Vista), Windows Live Mail, Thunderbird, etc.

    Windows Live Mail is popular
    http://Windows.Microsoft.com/en-us/Windows-Live/Essentials
    Is Thunderbird http://www.mozilla.org/en-US/thunderbird/

    Windows Essentials help:
    http://Windows.Microsoft.com/en-us/Windows-Live/Windows-essentials-help

    You can access outlook.com via Windows Live Mail

    Set up an email application with Outlook.com - Microsoft Windows Help:
    http://Windows.Microsoft.com/en-us/Windows/Outlook/send-receive-from-app

    After installing an e-mail program, make sure you have a default e-mail together program control panel > Default programs > set access and computer program defaults > Custom > click on the arrow down.

    Web-based e-mail services can only be made the default e-mail program in these 2 cases:
    * Yahoo, with the Yahoo tool bar
    http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html
    * Gmail with the installed Google toolbar

    https://support.Google.com/toolbar/answer/34800?hl=en

    Don

  • When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail client is not installed properley)

    E-mail client

    When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail)

    client is not installed properley) thanks Karen

    When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail)

    client is not installed properley) thanks Karen

    Hello

    Please see the post below for links to support for all the popular email client programs.

    Where can I get help with my questions by e-mail? (Windows 7)-Microsoft Answers:
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/where-do-i-get-help-with-my-email-questions/461490c7-302b-4cc8-bcd9-127e177d71c3

    Concerning

  • When I try to reply to an ad on craigslist, this is what I get... Please help... default mail client is not properly installed

    How can I make yahoo.com my default mail client... If I may respond to craigslist

    So that the MailTo URL work, you should have a real email client installed, not only to access messages using your web browser.

    If you download and install Yahoo Messenger, you should be able to make Yahoo webmail your default e-mail client.  To know with certainly, however, please come back to this thread, click on modify just below your post, change the Version of Windows, menu dropdown to indicate your version of WIndows, then click on submit.  Without knowing your version of Windows, it is difficult to formulate definitive proposals.

  • Message: "default mail client is not properly installed.

    I deleted several programs to get more system memory. I tried to restore my system to an earlier date, that date of was not available for a restore. Then when I click on the email toolbar icon I get an error message "could not perform this operation because the default mail client is not properly installed". What should I do to restore this ability? My OS is Windows XP Professional.

    Separated from the:

    http://answers.Microsoft.com/thread/3a1bb736-D208-406a-A8F8-e9dd2d8e73fe

    Control Panel | Add/Remove programs. Set Program Access and Defaults. Custom + down arrow | Select the option for Outlook Express. Also in Add/Remove Windows components, make sure OE is checked.
     

    Making OE the default e-mail client:
    http://www.oehelp.com/oedef.aspx
     

    For the links in the email:
    http://www.oehelp.com/oelnk.aspx
     
     

    Restore OE to e-mail clients list in Internet Options
    http://www.dougknox.com/XP/scripts_desc/oe_client.htm
     

    If you have installed MS Outlook, see also #13:
    http://www.oehelp.com/OETips.aspx#13 
     
     

     

     
  • Cannot perform this operation because the default mail client is not properly installed... help

    I can't send an e-mail from a link on a page without getting this error... "could not perform this operation because the default mail client is not properly installed"...    My windows mail is set as default and I can receive and send him good, please help.

    Thank you

    A program is defined as default does not mean that it has considered all of the default roles available.  In the case of Outlook 2007, there are 13 total default values that can be assigned, and it should have each of them.  It is possible to default Outlook for e-mail, but not the default value for write links in web pages.

    HAL

    --
    HAL Hostetler, TCE
    Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
    www.kvoa.com - KVOA television, Tucson, AZ.
    Live Hot Licks - www.badnewsbluesband.com
  • Dynamic CRM2011 for the outlook client does not recognize that I have already installed SP2

    Dynamic CRM2011 for server (vista 64-bit) or the outlook client does not recognize that I have already installed SP2

    Error log (edited to highlight what appears to be the problem):
    Latest Version of the OS: 6.0.6001
    11:14:06 |   Info |   Service Pack: Service Pack 1
    11:14:06 |   Info |   System type: workstation
    11:14:06 |   Info |   Mask away: 0 x 0300
    11:14:06 |  Error | Failed to install Microsoft Dynamics CRM for Outlook. Install Windows Vista Service Pack 2 and then try again.
    11:14:06 |  Error | System requirements not filled to allow the installer to run.
    My computer works SP2 and all current updates except for:
    • Platform Update for Windows Vista x 64-based Systems (KB971644)
    1. error: 8000ffff
    I ran 'fit' the Microsoft tool, but made no difference. This update is my problem, or I am barking the wrong tree?
    Help, please!

    Hi Paul,.

    The question you posted would be better suited in the Forums of Microsoft Dynamics. I would recommend posting your query in the Forums of Microsoft Dynamics.

    http://social.Microsoft.com/forums/en-us/category/Dynamics

  • I get a message "Cannot perform this operation because the default mail client is not properly installed". What should I do?

    I get a message "Cannot perform this operation because the default mail client is not properly installed".  What should I do?

    Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]

    You will need to install a (e.g. MS Outlook;) Windows Live Mail; Thunderbird) , and then set it as a default for mail in CUSTOM (<>) article in Set Program Access and defaults of the computer , then restart your computer before any function send to or MailTo will become available.

    In this forum, you will find some support for Outlook: http://answers.microsoft.com/en-us/office/forum/outlook

    Note: Office 2010 Home and Student Edition is not include Outlook.

  • "Could not perform this operation because the default mail client is not properly installed" when you use Windows Mail

    Original title: loss of entrance of Protocol in the list of saved files

    I use an old Toshiba laptop of two year with Vista as an operating system. It came with a trial version of Microsoft Office already installed. I had no use for it then after the trial expires I uninstalled. This seems to have created a minor problem with the e-mail program. When I visit a Web site and click on 'Contact us' I get an error message as follows "cannot perform this operation because the default mail client is not properly installed." I suspect strongly as during the uninstallation of office he removed a protocol in the list entry, similarly, the bottom of the list of the saved files. A check with other similar computers with Vista installed seems to confirm this. If someone at - it a quick fix to this problem? I don't want to resort to installing a whole new email software to fix this minor problem if I can avoid it.

    Hello Karena R, yesterday, I downloaded and installed Windows Live Mail, and I must say that I prefer Windows Mail Live Mail program. After making sure that Live Mail is the deafult for all messaging functions and that the entry "Mail Protocol" was now back to the list of saved files, I checked the problem mentioned in my original post. He is not fixed! Another small problem is fixed now if. In my "drafts" mailbox I have some e-mails stored there and when I click on one of them upwards now comes an email with the appropriate address inserted in the address line. Who could not before. I used to get this error message, which is now the new title of my post. So why the difference when I click on email address that I find on Web sites? Now, I also find that by Michael following the instructions (below), I do not see an entry "mailto" but his suggestion to step d. type in "URL Protocol" is not appropriate because it is already there. The installation of an entirely new email software should have my computer all the necessary entries for the new program to function properly in all respects. So what's happening? It begins to look as if uninstalling the program Office has pulled something real Vista operating system.

    It's a good thing, I thought of the research on other boards for my missing post.

    HKEY_LOCAL_MACHINE\Software\Classes\mailto

    c. in the Edit menu, select new, then clickstring goodwill.

    d. type of Protocol of URL as the name of the new string value

    e. exit the registry editor

  • Default mail client is not properly installed

    I get this message when I click on an e-mail link. Default mail client is not properly installed. How can I fix it

    Happends error because you have installed/used a different browser, then Internet Explorer, then during the uninstallation of the browser, you have broken the link between your default browser.

    The e-mail client has no path. To fix it, try to open your current browser, go to tools > Options, and then set the default browser. Close and your e-mail program. Re-open your email and try to open a hyperlink again, see if that fixes.  If not, go into Internet Explorer (if you are not already) and go to tools > options > advanced down, press reset, do not forget to reset personal settings, and then make sure the "default" browser is selected, and close.  This fixed my problem and is recommended for a few other places, give it a try.

    Edit: If it does not, what email program are you using?  Set it as default value (via the options of the program) also do so via the browser, Internet Explorer you go tools > Options > and set your e-mail by default also program...

  • Get a message saying that my default mail client is not properly installed.

    When I click on an email address, I get a message saying my default mail client is not properly installed, what can I do?

    Moved from the community involvement Center

    Original title: e-mail

    Windows 7 does not include a default mail client.

    If you wish, you can download a mail client and use it exclusively for your e-mail.

    Mozilla Thunderbird: https://www.mozilla.org/en-US/thunderbird/

    Windows Live Essentials (uncheck everything except Windows Live Mail): http://windows.microsoft.com/en-us/windows-live

    If you prefer to keep your reading electronic mail service, your best bet is to simply copy and paste the e-mail address.

  • Download "the default mail client is not properly installed" when I press a button on the site for email.

    Original title: default mail Client

    Sometimes a website has a button to send no given address. When I hit the button I get the message "the default mail client is not properly installed".  What does that mean? I do not see in any Windows mail information page.

    Saturday, September 27, 2014 00:43:08 + 0000, larry3000 wrote:

    Sometimes a website has a button to send no given address. When I hit the button I get the message "the default mail client is not properly installed".  What does that mean? I do not see in any Windows mail information page.

    Are you doing your e-mail on a web site? If so, you probably haven't
    set up a default email client. The e-mail client is the program
    you use for mail, not a website. Standard e-mail programs are
    Outlook.exe, Windows Live Mail, Thunderbird, strong Agent, etc. He
    are a lot of choices.

  • IP address of the IPSec VPN client did not get distributed via EIGRP

    We use an ASA for VPN remote access. He is running EIGRP redistribute static routes. When a client Anyconnect SSL connects, the SAA creates a static route for this client, and it gets redistributed via EIGRP. When an IPSec VPN client connects, the SAA creates a static route for this customer, but he isn't redisributed via EIGRP and so the client can not achieve anything. Why he would distribute a static created by an IPSec client?

    Thank you

    Have you set up IPP on dynamic Cryptography?

  • Error message when opening the parts attached Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

    Original title: fault of the Explorer

    How can I solve this problem.

    Sometimes when you try to open an attachment, I see this message:

    Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

    Thanks for your HELP!

    Hi Robert,.

    Thank you for your response.

    Please let us know if you need help with Windows, we will be happy to help you!

  • Default mail client is not properly installed. How can I fix it?

    I have a Windows 7 Home Premium desktop computer. I've been running Internet 7, I don't know how, but he jumped at Internet 8 so that's what I use now. I have no problem getting my Email or mail. There are just some Sites that I click on that I have a Popup that says "cannot perform this operation because the default mail Client is not properly installed. Why did I get this Message only on some Sites and not others?  Someone has an answer for this?         Thanks for any help.   Odell Whitman.

    There is no Internet 7 or 8 there is IE7, 8 & now IE9.

    IE9 is released in 2011 and should be installed via windows update some time ago

    Win7 contains no default e-mail client, you must install a

  • After clicking on the email, I get a message that "my mail default client was not installed correctly or completely."

    Original title: default client

    I am invited by a message that my mail default client was not installed correctly or completely

    I tried to click on an email address that is blue and the message that my mail default client is not installed properly or natural

    Hello

    1. What mail client do you use (Yahoo, Gmail, Hotmail)?

    2. do you have Outlook or Windows Live Mail installed on your computer?

    3 have you tried the steps suggested by Andre Da Costa replied on 14 March 2012 from the link http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/i-am-prompted-by-a-message-that-my-default-client/d47a2780-8cb3-4691-ae16-99e8fee49854

    Reply back with more information, which will help us to solve the problem as soon as possible.

Maybe you are looking for