10.1.1 on Windows 7 clients deployment error

Similar Questions

• Windows 7 client version is closing my old game during the game titles

  Windows 7 client version runs some other very well on what games it closes.  I have older games title but some work very well, others do not work.  I had problems with windows doesn't recognize not the disk in the driver (Stronghold 2), I had the game for closing right after the introduction (black and white), I got the game close after an hour of play (SimCity4), and I had absolutely no problem with the game for hours (Rome: Total War).  The screen flashes always black and when it appears it shows Windows is trying to find a solution to this problem.  It gives no option and then restart seems to do nothing at all because the problem persists.  Is this just a problem with the customer of output or is it just a simple matter of new software too old games.

  FYI: Windows xp worked fine with all these titles on the old computer, and now the new computer was built just so there is no problem with the hardware.

  tunksee,
  The XP VPC is only for Windows 7 full or professional edition.  It seems that some of them are older games and can just have problems with current running on a newer system.  You can check with the manufacturers of games to see if they have all the patches that will help the game race on Vista\Windows7.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need to access a shared resource by a Linux via NFS server from a Windows XP client.

  original title: access an nfs share

  I need to access a shared resource by a Linux server via nfs from a Windows XP client.

  I suggested to install "Windows Services for UNIX Version 3.5" and I downloaded it, but:

  • I see only an English (or maybe Japaneese) version: can be used on my Windows XP withoyut Italian language conflicts?
  • I tried the ti montage, but I find a lot of features, I don't need
  • When installing asked me questions that I can't answer

  Is there a simpler way to let a windows XP client to connect to an nfs share?

  If "Windows Services for UNIX Version 3.5" are the right solution, where can I find the documentation to install it in the simplest?

  Concerning

  Marius
  Roma - Italy

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet Windows XP Service Pack 3 (SP3).

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• I'm not able to add a shared printer on a Windows XP client computer.

  original title: network printers

  I'm not able to add a shared printer on a Windows XP client. One, printers

  Canon MP830 and an Okidata 320 are installed locally on a Windows 2003 Print

  Server. Both are on the same domain. I also have Windows XP, 7, Vista and Linux

  machines on the same network. They are all able to print. The only one who does

  not working is a Windows XP client. This machine has also win 7, Vista installed

  on different hard drives. they are able to print to shared printers. I have

  cammot access to a printer by using the UNC path. I can see the shared

  printers in Favorites network but I can not connect. If I use the add printer

  Wizard to add a network printer, the printer appear in the book: but

  Yet once, they will not connect the error message I get is:

  "Unable to add the printer connection. Either the typed wsa printer name

  incorrctly, or the specified printer has lost its connection to the server. »

  I checked the permissions for the priners and I am logged in as one

  administrator when I try to add the printer. I also checked the group policy and

  everything seems to be oK. I also deleted and added the printer to the

  Server, that I managed to install them as local printers on the affected XP machine

  using the \\server_name\printer_share_name port. The priner name and the

  share name are the same for each printer. They have all worked last week that

  network printers. I'm curious to know what is causing this weird behavior. Any

  help would be greatly appreciated.

  Thank you

  John

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope that helps.

• Games for windows live client crashes

  Games for windows live client crashes on download Age Of Empires 3 saying out of memory and it was the only thing that I had opened, I've played other games like batman arkhum asylum GFWL and age of empires online very well. I have used other services such as this fine on this pc and I have 2046 MB RAM

  Hi tacoskin,

  Since the problem is related to Games for Windows, I suggest that you post your question on games for Windows Live Forums.

  Games for Windows - Xbox.com

• I have a 10060 on Vista winsock error when trying to send an email to Optonline with the Windows Messaging client.

  have an error 10060 on Vista winsock tries to send an e-mail to Optonline with the Windows Messaging client.  Check the usual suspects, port 25, addresses seem to be good.  I really remove the tcp/ip stack or change the registry?  It's only outgoing mail that creates errors.  Any suggestions?

  Hello AndySealfon,

  I suggest watching this Microsoft article:
  http://support.Microsoft.com/kb/811087
  Try troubleshooting steps one and two, and let us know if your problem is solved.

• Could not connect to Server-CentOS linux virtual desktop of Windows 8 client

  Unable to connect to the virtual office CentOS 6 using vWorkspace.

  Implementation error "could not connect to the server.

  XRDP installed correctly as I can successfully RDP using RDP client from a Windows 8 client.

  Forest licences on the broker for connections,

  0 NCSDSK01. LABORATORY. REDARMOUR.CO.UK10.20.1.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%systemroot%\explorer.exe1011121

  2013-09-23 22:33:10.510-748 11032 - broker - INFO - # message collection accepted...

  2013-09-23 22:33:10.510-748 11032 - broker - INFO - heartbeat: NCSDSK01.lab.redarmour.co.uk (10.20.1.181)

  2013-09-23 22:33:10.510 - 748 - 11032 - broker - DEBUG - CDbManager: Re-use of conn = 0x053f2510 (50)

  2013-09-23 22:33:10.510-748 11032 - broker - INFO - get the status of the remote computer.

  2013-09-23 22:33:10.526 - conn - broker - DEBUG - CDbManager:keeping 748-11032 = 0x053f2510 (50, lastCount = 49)

  2013-09-23 22:33:10.526 - 748 - 11032 - broker - INFO - CDbManager:connection held 17 ms

  2013-09-23 22:33:10.526-748 11032 - broker - INFO - # message Finished collection (MS = 17)

  2013-09-23 22:33:11.509-748 11032 - broker - INFO - # message collection accepted...

  DNS resolves the virtual machine very well and the broker for connections indicates that the virtual computer is off and online. The installed Virtual Office Extensions and service that runs successfully.

  CentOS VM is joined to the domain active directory.

  Watch it records all service broker of successful connection messages

  Any idea?

  This question is not met at the time of the request.

• Request concerning the sequence of updates for the Windows Update client in 2015

  I posted a query similar to this on a Microsoft Technet forum, but I have not yet received a response to the specific question that I asked.  I'm trying so this forum.

  I am running Windows 7 Home Premium SP1, but I did not intend to accept the free update of Windows 10.  I don't use automatic updates.  I use Windows Update manually and select the updates to install, even for these updates identified as Important.

  Since April 2015, there was a sequence of updates for the client Windows Update on Windows 7 (Windows 8).  I have the Windows 7 of those below list:

  KB2990214 (April 2015)

  KB3050265 (June 2015)

  KB3065987 (July 2015)

  KB3075851 (August 2015)

  KB3083324 (September 2015)

  KB3083710 (October 2015)

  KB3102810 (November 2015)

  KB3112343 (December 2015)

  (This list is probably less intimidating than it looks because the replaced October update Update September, which replaced the August update, which replaced the July update, which replaced the June updated.  "There are therefore basically just 4 updates.)

  The big question is, given that Windows 7 is available for several years, why, all of a sudden, there was this sequence of updates for the Windows Update client?  Because these updates began to occur at the time when the offer of a free upgrade to Windows 10 was announced, I could be forgiven for thinking that all of these updates are really directed towards the relaxation of the upgrade to Windows 10 via Windows Update, and that there is little or no advantage to systems that are not upgrading.  I am mistaken in this belief?  If not, precisely those who will benefit from my system, even if it is not upgraded to Windows 10?

  The updates that I currently installed, depending on the installed updates, are KB2990214 (April 2015), KB3075851 (August 2015), KB3083324 (September 2015) and KB3083710 (October 2015).

  In my view, there was a lack of transparency in the descriptions of these updates in the KB articles.  And, in one or two cases, information on the importance of an update in the article and in Windows Update has been inconsistent.  It would have been much clearer if each KB article stated for NOT upgrading to Windows 10 systems, if the update to the Windows Update client is important, as an option or completely irrelevant.

  Hello, Tiberius.

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your time and your concern.

  You can read this article and check if it helps.
  Next update to Microsoft Update Client
  http://blogs.technet.com/b/Mu/archive/2014/06/24/upcoming-update-for-Windows-Update-client.aspx

  Please keep us informed.

  Thank you

• Unable to download purchased games for Windows Marketplace Client game

  I have therefore built a new PC and decided to start to buy and games to test the machine on some PCs. The first one I decided to buy was GTA IV games for windows marketplace. I did, and it appears in my thin, recent purchase history. I click on the link 'Download' and I need to install games for Windows Marketplace client.

  I installed without problems and signed in--however whenever I login and click on "Downloads" tab, I'm presented with a red error as follows:

  There was an error recover your purchase history. Please disconnect and try again later.

  I signed and back in several times now, and the purchase was made about 2-3 hours ago.

  This problem can be corrected? If not, will I get my £20 for the purchase of the game I can't download or obtain the product key from?

  Hello

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps described in the following link and check if the problem persists:

  http://support.Microsoft.com/kb/938705

  Method 2:

  If the previous step fails, follow the steps in the link:

  http://support.Microsoft.com/kb/937066

  If the problem persists I suggest you to communicate with the Windows Marketplace Client to help you have a problem with signing into the account. Please visit the link below to find a community that will support what ask you:

  http://support.Xbox.com/en-us/contact-us?XR=footnav#5:5

• How to install the mail under Windows 7 client

  How can I find a guide step by step to install the mail on Windows 7 client

  How you do this will vary according to the client and who is your email provider that you want to use.  Normally, the instructions will be found in the section using your e-mail provider.  Here are two examples:

  Gmail and Windows mail IMAP: http://support.google.com/mail/bin/answer.py?hl=en&answer=77696

  Comcast mail and Windows Mail client: http://customer.comcast.com/help-and-support/internet/using-windows-mail/

  If you know who your provider of e-mail and that customer that you want to use, someone may be able to provide more specific assistance.

• Windows 7 clients must update the printer driver for no reason

  I have a problem with my Windows 7 clients in the field. We have 2012 print server and multiple printers installed on it. I installed a new printer Canon IR with a new Canon's Web page driver. After I did, almost all clients Windows 7 got a caveat that they need update driver for printing. The customers do NOT use the printer I have installed, but the others (which worked fine until my installation). Is it possible that installing new printer cause other printers compatible update? I can it avoid in the future?

  Hello Ivan,.

  Depending on your answer, your computer is connected to a domain network that includes various policies that govern your system and can affect the basic operation of a stand-alone system. So, I suggest you to republish your query on the TechNet forum for best expertise on this issue.

  All the best!

• Windows Jabber client

  I strive to Jabber Windows installation client.

  I CUCM 9.1.2 and joined my announcement in CUCM. I installed Windows Jabber 11.1.1 and can login with my account AD information.

  But now that I get. I have a red bottom left of Jabber. I searched help and he says:

  Connection error. Ensure the server information in the PhoneServices tab on the Options window is correct. Contact yoursystem administrator for assistance.

  However, I looked and there isn't a telephone Services tab in the Options window. So I looked further and found a document saying configure the instant messaging and presence. But then I found another document saying that IM and presence has been fully integrated in CUCM 9 and later. I don't have a presence server right now and don't even know if I need one or not. Until the tinykitty am supposed to do? Completely lost in ass of Cisco. I well it might be interesting giving Jabber to everyone but is just a confusion and frustration and more I work with Cisco more, I hate it.

  You posted in the wrong forum, this forum was for the 'free' JabberVideo service that was received by Cisco, no Jabber.

  Suggestions you move this to the Jabber Client forum where you have a better chance of getting a response.

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• VPN using Windows Native Client

  Is there a way to use the native Windows VPN Clients in collaboration with the ASA 5520 running IOS 8.0? XP and Vista. I prefer to use them because I have several custom applcations that trigger the windows VPN Client. To work around the problem I just enabled passthrough and have the vpn running on another server but I would prefer it to be on of the SAA.

  Thank you.

  Looks like you want to use L2TP over IPSEC, below is a link on how to configure this on the SAA;

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00807213a7.shtml

  HTH.

• Movi Client deployment

  I have a customer who bought a packet of starter with 50 customer records. Now, he asks if he can client deployment via GPO with advanced preconfigured settings.

  Someone has tried this or equivalent?

  Kind regards

  Niels

  MOVI may be initiated with your settings advanced preconfigured - this is how roll out us the software for customers the 1,600 + Movi.

  Take a look at pages 10-11 of the guide admin Movi 4.2.

• Windows 7 clients receive black screen RDP'ing to the 2012 Server

  Hello

  I have a situation where I have a domain with two machines 2012 Server 2003, which is a domain controller, the other Member.

  It seems that none of the Windows 7 clients can connect via RDP to one of the two machines Server 2012. The symptoms are a black screen

  Fortunately Windows XP machines can connect to the server of 2012

  Machines XP and Windows 7 are members of the domain

  Other symptoms include Windows 7 not being machines is not able to connect to Exchange 2010 and OWA does not

  I disabled the firewall, disabled group policy. made sure the RDP V8 patch has been applied for W7 clients, saved event logs

  I have connected to the server using RDP 2012 on a W8 client (which is not part of the domain), can also use OWA

  Thoughts or ideas greatly appreciated

  Thank you very much

  Simon

  Hello

  The question you posted would be better suited in the Forum of the server. Please visit the link to find a community that will provide the support you requested.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Hope this information helps you.