Windows Jabber client

Similar Questions

• Cannot communicate with the server error 11.5 Jabber clients Windows and Mac

  Hi guys,.

  I recently installed CUCM 11.5 (No. Cisco instant messaging and presence) in my lab. Its a simple installation without the LDAP server using the internal directory CUCM to set up customers. I am successfully able to connect to Jabber via my iPhone and iPad on 11.5 Jabber clients or 11.6. I am also able to connect to jabber in windows machine if I use the version of the client Jabber 9.7. However, if I use 11.5 Jabber on the Windows client, it gives me "cannot connect with Server error." On Macbook, I get this error on all the versions I used including old version 9.6.

  The only thing that I noticed that it is option for iPhone Jabber Client forward to put the ip of the CUCM server on option Phone Service only. There are in Windows or Mac Jabber Client 11.6, arrangement for CCM 9 or a later version, where I put my CUCM server IP address.  Am I missing something?

  Kind regards

  S

  Hello

  Just check that you have configured on the system--> the server on cucm entry. If its host name or the FULL domain name, I think your jabber for windows try to solve but unable to do so because of no connectivity to the DNS server or no entry in the DNS server.  Try it below to check if she.

  Change the host file on PC windows from the location below,

  C:\Windows\system32\drivers\etc

  Once you pass on the location and add the cucm entry in the host file, reset your jabber and mention the cucm for connection ip address manually and then check.

• Jabber client - encryption of VCS Expressway with MRA

  Hi all

  I'm working on the implementation of MRA for a video solution existing. Version CUCM is 9.1.2 (no IM & P server), vcs - c and vcs-e 8.2.2.  Client Jabber is 11.5.x

  I finished most of the introduction and I am able to call internally and externally through MRA.

  I still have a few things to tweak.  One is the encryption of video calling once jabber connects from outside.  From my understanding, the thigh jabber call end point and VCS Expressway uses TLS. But when I run wireshark on the PC with Jabber client, I don't see the RTP stream as being encrypted.

  CUCM my jabber device does not use a secure profile.  Is it ok or not?

  Please let me know if more are needed.  Thank you

  You can confirm the call is encrypted from the client of jabber MRA by doing as follows (I used 11.5 jabber client, if you are using an older client, I can't guarantee this method):

  1. make a call from the client jabber ARM, once the call is configured and media is established, you can end the call.
  2. create a jabber client problem report (help > report a problem...)
  3. Enter the required details and save the .zip file.
  4 extract the file "jabber.log" from the .zip file. Since this file (at least since the version of client jabber 11.5) has the SIP messaging included in this document, you can use TranslatorX to view the file (you can also use a text editor if you wish).
  5 generate a diagram of the log file.

  translatorx - 01.png

  

  6. in the diagram of the scale, you should be able to locate the origin of the call. Search for an invitation, in my case a "RE-INVITE" and select it. A pop-up window will appear with the details of the SIP message.

  translatorx - 02.png

  

  7. read the content of the message prompt of the SIP protocol (focusing on the SDP - the component of negotiating media). I won't go into detail about how to read SIP messages (there's a good article here, it is not for jabber specifically, but the same concepts apply).

  translatorx - 03.png

  

  8. close the prompt message and open the message 'OK w/SDP' to examine the response of the VCS-E. The SDP response, we can confirm that the encryption settings have been accepted for the media (media will be encrypted).

  translatorx - 04.png

  

  For re - apply point Jamie, unless you run CUCM in mixed mode and using security profiles, signalling/media encryption stops on the thigh of CUCM/endpoint and the VCS - C respectively. See the diagram below for reference (mixed mode not implemented).

  MRA-media - flow.png

  

  You need not applied to the device of CSF security profiles to obtain the encryption between the client of jabber MRA and the VCS-E. If you can decode signaling and media packets in Wireshark your jabber client, you probably will not connect via ARM (ARM is always encrypted).

  Please let us know if that helps.

  -Jon

• Unable to connect to presence server Jabber clients

  Salvation;

  I am a newbie in Collaboration and to learn basics who set up a small laboratory including 11 CUCM, presence 11 and two phones 7821 Cisco. I have configured CUCM and presence and set up a SIP trunk between them according to the documents. I tried to configure the client Jabber on Windows, but in vain. first of all, I created some local users on CUCM and have some LDAP users that have been synchronized with a test AD in which both the presence and the CUCM are members of this domain. I set up a local users CUCM for Jabber Client and to configure as follows to configure the Jabber Clients according to the documents.

  My first question is the format of the user name that should be used with Jabber. client Jabber said we use "[email protected] / * /" format, but I saw the videos on the Internet using normal user name and password. regarding the fact that I have configured a local user for the Jabber CUCM, I entered in the form of "username" but Jabber said the format should be as "[email protected] / * /'." "

  the second problem is that even after writing the user name in this format, the Jabber said that 'not to communicate with the server'. I can ping the CUCM and presence server both by using their ip addresses and hostnames through my PC on which is installed the Jabber. also I wrote serves him the IP address on the Jabber client while trying to connect the Jabber instead of their host names. is there any requirement to be member of a single domain?

  I tried Jabber for iPad to connect to the presence, but in vain too. y at - it knows no question or tips about the present? Otherwise, I can explain the steps I went through them to set up the presence and the CUCM for Jabber clients.

  best regards;

  Because for the most part, allows you to know the details of connection SRVs and SRVs work based on the field.

  You have successfully configured your SRVs according to configuration guides?

  It is very likely that some missing config or a misconfiguration.

  I have videos on how to configure the IM & P as well as Jabber config integration

  https://www.YouTube.com/playlist?list=PLFuOESqSTxEvZChqWgAJanctohRMe99CR

• Hidden video of the Jabber Client for SX20

  Hello

  We test on the jabber for Windows client and the only way we can get it to connect is by forcing the H323 Protocol (ie: H323:[email protected] / * /) and the launch of the SX20.  When we do this, we can only see and hear what is happening to the SX20 and the SX20 shows no audio / video from the Jabber client.

  We we try to connect directly on the SX20, it says that the device is in offline mode.

  The jabber client is able to support video and audio on H323?

  Thank you

  Hi Jesse,.

  Unfortunately, the free beta Cisco Jabber video service does not support H.323 calls.  This service is SIP URI based the appeal only.

  Kind regards

  Jason

• Windows 7 client version is closing my old game during the game titles

  Windows 7 client version runs some other very well on what games it closes.  I have older games title but some work very well, others do not work.  I had problems with windows doesn't recognize not the disk in the driver (Stronghold 2), I had the game for closing right after the introduction (black and white), I got the game close after an hour of play (SimCity4), and I had absolutely no problem with the game for hours (Rome: Total War).  The screen flashes always black and when it appears it shows Windows is trying to find a solution to this problem.  It gives no option and then restart seems to do nothing at all because the problem persists.  Is this just a problem with the customer of output or is it just a simple matter of new software too old games.

  FYI: Windows xp worked fine with all these titles on the old computer, and now the new computer was built just so there is no problem with the hardware.

  tunksee,
  The XP VPC is only for Windows 7 full or professional edition.  It seems that some of them are older games and can just have problems with current running on a newer system.  You can check with the manufacturers of games to see if they have all the patches that will help the game race on Vista\Windows7.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need to access a shared resource by a Linux via NFS server from a Windows XP client.

  original title: access an nfs share

  I need to access a shared resource by a Linux server via nfs from a Windows XP client.

  I suggested to install "Windows Services for UNIX Version 3.5" and I downloaded it, but:

  • I see only an English (or maybe Japaneese) version: can be used on my Windows XP withoyut Italian language conflicts?
  • I tried the ti montage, but I find a lot of features, I don't need
  • When installing asked me questions that I can't answer

  Is there a simpler way to let a windows XP client to connect to an nfs share?

  If "Windows Services for UNIX Version 3.5" are the right solution, where can I find the documentation to install it in the simplest?

  Concerning

  Marius
  Roma - Italy

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet Windows XP Service Pack 3 (SP3).

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• I'm not able to add a shared printer on a Windows XP client computer.

  original title: network printers

  I'm not able to add a shared printer on a Windows XP client. One, printers

  Canon MP830 and an Okidata 320 are installed locally on a Windows 2003 Print

  Server. Both are on the same domain. I also have Windows XP, 7, Vista and Linux

  machines on the same network. They are all able to print. The only one who does

  not working is a Windows XP client. This machine has also win 7, Vista installed

  on different hard drives. they are able to print to shared printers. I have

  cammot access to a printer by using the UNC path. I can see the shared

  printers in Favorites network but I can not connect. If I use the add printer

  Wizard to add a network printer, the printer appear in the book: but

  Yet once, they will not connect the error message I get is:

  "Unable to add the printer connection. Either the typed wsa printer name

  incorrctly, or the specified printer has lost its connection to the server. »

  I checked the permissions for the priners and I am logged in as one

  administrator when I try to add the printer. I also checked the group policy and

  everything seems to be oK. I also deleted and added the printer to the

  Server, that I managed to install them as local printers on the affected XP machine

  using the \\server_name\printer_share_name port. The priner name and the

  share name are the same for each printer. They have all worked last week that

  network printers. I'm curious to know what is causing this weird behavior. Any

  help would be greatly appreciated.

  Thank you

  John

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope that helps.

• Games for windows live client crashes

  Games for windows live client crashes on download Age Of Empires 3 saying out of memory and it was the only thing that I had opened, I've played other games like batman arkhum asylum GFWL and age of empires online very well. I have used other services such as this fine on this pc and I have 2046 MB RAM

  Hi tacoskin,

  Since the problem is related to Games for Windows, I suggest that you post your question on games for Windows Live Forums.

  Games for Windows - Xbox.com

• I have a 10060 on Vista winsock error when trying to send an email to Optonline with the Windows Messaging client.

  have an error 10060 on Vista winsock tries to send an e-mail to Optonline with the Windows Messaging client.  Check the usual suspects, port 25, addresses seem to be good.  I really remove the tcp/ip stack or change the registry?  It's only outgoing mail that creates errors.  Any suggestions?

  Hello AndySealfon,

  I suggest watching this Microsoft article:
  http://support.Microsoft.com/kb/811087
  Try troubleshooting steps one and two, and let us know if your problem is solved.

• Could not connect to Server-CentOS linux virtual desktop of Windows 8 client

  Unable to connect to the virtual office CentOS 6 using vWorkspace.

  Implementation error "could not connect to the server.

  XRDP installed correctly as I can successfully RDP using RDP client from a Windows 8 client.

  Forest licences on the broker for connections,

  0 NCSDSK01. LABORATORY. REDARMOUR.CO.UK10.20.1.1819226174E610C20BD20DBB133C34DA791DC2219DA08BF977B6A0A1AA17FFC12106CD17403A242F3EF1AF61598B08900899588552513AC7CDABC2E7DF1408B8D9B4F0CD7987351BB35D10F3F5DDCDB1595428A57DB0BBD06EA26057F64D7315A25DD1405A96E9EADB5E93BFC48FAF7C5B5FAE750676214FC747EA171F9FCBE52A3FAB6BDC89964F930F9478AE24E7ADAF4AE86C6CF06D00797F252F7C2E1FB617D41D820F584D9773B83144C63DCF9B17E174F73C99C9446ADEDBA478E741EEC914D7F433C8C124C2493F6BE9AD8945541F4D646B4987882941EBCC80EA01725CFDABD1F1AD49947265C98CADF19657AE2A7BD100DEF4138097F1AF577A2C6BF08CentOS%systemroot%\explorer.exe1011121

  2013-09-23 22:33:10.510-748 11032 - broker - INFO - # message collection accepted...

  2013-09-23 22:33:10.510-748 11032 - broker - INFO - heartbeat: NCSDSK01.lab.redarmour.co.uk (10.20.1.181)

  2013-09-23 22:33:10.510 - 748 - 11032 - broker - DEBUG - CDbManager: Re-use of conn = 0x053f2510 (50)

  2013-09-23 22:33:10.510-748 11032 - broker - INFO - get the status of the remote computer.

  2013-09-23 22:33:10.526 - conn - broker - DEBUG - CDbManager:keeping 748-11032 = 0x053f2510 (50, lastCount = 49)

  2013-09-23 22:33:10.526 - 748 - 11032 - broker - INFO - CDbManager:connection held 17 ms

  2013-09-23 22:33:10.526-748 11032 - broker - INFO - # message Finished collection (MS = 17)

  2013-09-23 22:33:11.509-748 11032 - broker - INFO - # message collection accepted...

  DNS resolves the virtual machine very well and the broker for connections indicates that the virtual computer is off and online. The installed Virtual Office Extensions and service that runs successfully.

  CentOS VM is joined to the domain active directory.

  Watch it records all service broker of successful connection messages

  Any idea?

  This question is not met at the time of the request.

• Request concerning the sequence of updates for the Windows Update client in 2015

  I posted a query similar to this on a Microsoft Technet forum, but I have not yet received a response to the specific question that I asked.  I'm trying so this forum.

  I am running Windows 7 Home Premium SP1, but I did not intend to accept the free update of Windows 10.  I don't use automatic updates.  I use Windows Update manually and select the updates to install, even for these updates identified as Important.

  Since April 2015, there was a sequence of updates for the client Windows Update on Windows 7 (Windows 8).  I have the Windows 7 of those below list:

  KB2990214 (April 2015)

  KB3050265 (June 2015)

  KB3065987 (July 2015)

  KB3075851 (August 2015)

  KB3083324 (September 2015)

  KB3083710 (October 2015)

  KB3102810 (November 2015)

  KB3112343 (December 2015)

  (This list is probably less intimidating than it looks because the replaced October update Update September, which replaced the August update, which replaced the July update, which replaced the June updated.  "There are therefore basically just 4 updates.)

  The big question is, given that Windows 7 is available for several years, why, all of a sudden, there was this sequence of updates for the Windows Update client?  Because these updates began to occur at the time when the offer of a free upgrade to Windows 10 was announced, I could be forgiven for thinking that all of these updates are really directed towards the relaxation of the upgrade to Windows 10 via Windows Update, and that there is little or no advantage to systems that are not upgrading.  I am mistaken in this belief?  If not, precisely those who will benefit from my system, even if it is not upgraded to Windows 10?

  The updates that I currently installed, depending on the installed updates, are KB2990214 (April 2015), KB3075851 (August 2015), KB3083324 (September 2015) and KB3083710 (October 2015).

  In my view, there was a lack of transparency in the descriptions of these updates in the KB articles.  And, in one or two cases, information on the importance of an update in the article and in Windows Update has been inconsistent.  It would have been much clearer if each KB article stated for NOT upgrading to Windows 10 systems, if the update to the Windows Update client is important, as an option or completely irrelevant.

  Hello, Tiberius.

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your time and your concern.

  You can read this article and check if it helps.
  Next update to Microsoft Update Client
  http://blogs.technet.com/b/Mu/archive/2014/06/24/upcoming-update-for-Windows-Update-client.aspx

  Please keep us informed.

  Thank you

• Unable to download purchased games for Windows Marketplace Client game

  I have therefore built a new PC and decided to start to buy and games to test the machine on some PCs. The first one I decided to buy was GTA IV games for windows marketplace. I did, and it appears in my thin, recent purchase history. I click on the link 'Download' and I need to install games for Windows Marketplace client.

  I installed without problems and signed in--however whenever I login and click on "Downloads" tab, I'm presented with a red error as follows:

  There was an error recover your purchase history. Please disconnect and try again later.

  I signed and back in several times now, and the purchase was made about 2-3 hours ago.

  This problem can be corrected? If not, will I get my £20 for the purchase of the game I can't download or obtain the product key from?

  Hello

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps described in the following link and check if the problem persists:

  http://support.Microsoft.com/kb/938705

  Method 2:

  If the previous step fails, follow the steps in the link:

  http://support.Microsoft.com/kb/937066

  If the problem persists I suggest you to communicate with the Windows Marketplace Client to help you have a problem with signing into the account. Please visit the link below to find a community that will support what ask you:

  http://support.Xbox.com/en-us/contact-us?XR=footnav#5:5

• How to install the mail under Windows 7 client

  How can I find a guide step by step to install the mail on Windows 7 client

  How you do this will vary according to the client and who is your email provider that you want to use.  Normally, the instructions will be found in the section using your e-mail provider.  Here are two examples:

  Gmail and Windows mail IMAP: http://support.google.com/mail/bin/answer.py?hl=en&answer=77696

  Comcast mail and Windows Mail client: http://customer.comcast.com/help-and-support/internet/using-windows-mail/

  If you know who your provider of e-mail and that customer that you want to use, someone may be able to provide more specific assistance.

• Windows 7 clients must update the printer driver for no reason

  I have a problem with my Windows 7 clients in the field. We have 2012 print server and multiple printers installed on it. I installed a new printer Canon IR with a new Canon's Web page driver. After I did, almost all clients Windows 7 got a caveat that they need update driver for printing. The customers do NOT use the printer I have installed, but the others (which worked fine until my installation). Is it possible that installing new printer cause other printers compatible update? I can it avoid in the future?

  Hello Ivan,.

  Depending on your answer, your computer is connected to a domain network that includes various policies that govern your system and can affect the basic operation of a stand-alone system. So, I suggest you to republish your query on the TechNet forum for best expertise on this issue.

  All the best!