10-bit color depth / 30-bit on old iMac?

Similar Questions

• Lightroom 6 supports 10-bit color depth?

  I am a user of Lightroom 5.7.

  I know version 6 introduced the gpu acceleration, but the 10-bit color depth has been introduced through openCL?

  No 6 LR does not support monitors 10bits AFAIK. Lightroom performs all the calculations in 16-bit precision, but for display on a screen, the images are always reduced to 8-bit.

• Satellite Pro P100-327 screen color depth/quality problem

  Hi guys, my first post! Had my Tosh for 3 years now. I now have a problem with the display. It seems that the color depth is really down or something... as I stumble on the 8-bit color depth. Everything seems strongly Posterization in the graphical sense.

  I uninstalled the video drivers and reinstalled a new, former, a version of toshiba, a version of the nvidia driver and all have no effect on the problem. No joy!

  I went through and checked all the settings of resolution and color depth, and trawled through the many pages of settings nvidia and played with all the reasonable parameters to find the problem. No change. All reset to how I found it.

  I've been reading through the forums and not really found something specific. If I missed it, then I would a link here slapped on my face to show how incompetent I am! ;)

  I will however try to disconnect the battery and the power for an hour and turn it on again later as this seems to be the standard solution or must try for everything. What do this exactly? Reset of the BIOS/CMOS etc?

  Thanks in advance!

  You have the same problem if you connect the external monitor to your laptop?
  Have you tried to test already?

• How to save a picture of object front panel with the color depth?

  When I use the Invoke node method to get the image of an object to front panel, then save it as a bmp or png, I seem to lose the color depth. What should I do to register programmatically façade objects with the same number of colors as they appear on the screen?

  I'm using LabView 2011 11.0

  You have an entry in the Invoke node called Image depth.  You wired a 8 for her.  Why?  Doesn't mean that you capture an image at a depth of only 8-bit rather weak image?

• PSE8 color depth

  Can PSE8 edit and save files with 30-bit color depth?

  Yes.   PSE can change the time 8 bit-by-color files and 16-bits-per-color. Many scanners produce 10 bits/color (30 bits per pixel), which get stored in 16 bit/color (48 bits per pixel).

  Note that a number of commands in the PES editor does not work on 16 bit images.  In general, commands that manipulate the entire image (for example, levels, brightness/contrast, most of the filters) work on images 16 bits, whereas commands for manipulating individual pixels and selections (including diapers) only works on 8-bit images.

• Windows will not update the screen resolution and the color depth

  Out of the blue today, my Windows XP installation had its color depth and screen resolution back to the lowest setting and whenever I try to update it refuses to put up-to-date.

  I even try to restart my computer and a bubble appears downstairs offering reset the color depth and resolution to my automatically.  When I click, it appears as if he's trying to return to normal, but again once nothing happens - the colors and the screen resolution is still at the lowest setting.

  Can any ideas on how I fix?

  Hello

  Here are some things to try to fix it.

  Change the screen resolution.

  "How the resolution screen on Windows XP"

  http://pcsupport.about.com/od/Videocards/HT/screenres.htm

  You can also right-click on an empty desktop > properties > settings > it the slider bar allows you to increase the resolution > Apply > OK > agree in the next window, etc.

  If that fixed it, have damaged you graphic drivers.

  Access the site on your computer or the manufacturer of the graphics card > look for a driver download Section > search for your model number and operating system > get graphics / video / Chipset Drivers (depending on how it is formulated) > download and install.

  Change the screen resolution.

  You can also try a system restore before all these problems started:

  "How to use System Restore in Windows XP"

  http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-XP.htm

  See you soon.

• Failed to create the Direct3D device. try to change the resolution or color depth

  When I try to open the game this message is impossible to create the device come direct3d. try to change the resolution or color depth
  Please help me

  Hello

  1. what game are you talking about?

  2. have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

  DirectDraw or Direct3D option is unavailable: http://support.microsoft.com/kb/191660

  DirectX: Description of the DirectX Diagnostic tool: http://support.microsoft.com/kb/190900/en-us

  Hope this information is useful.

• How to set the color depth

  try to set the color of amd's message color depth less than 24. How to set the highest color depth?

  If your computer allows you to change this setting, it will be located in the "Control Panel > display > resolution > Advanced Settings > Monitor tab > screen colors.

• Problems with the Speedgrade color depth

  Hello everyone!

  As said in the title I have problems with the number of colors in Adobe Speedgrade.

  I would like to color - correct images my drone DJI using LUTs and, of course, build-in Speedgrade tools.

  Unfortunately, the use of the LUTs makes video appearance as there are not enough color-depth because you can see the bands in gradients (especially in the sky).

  I hope you can see the problem in the following screenshot.

  Scratches appear in Speedgrade preview, as well as in video rendering.

  So what can I do to avoid this scratches?

  Thank you in advance!

  Greetings

  Raphael

  

  I have not bought any of the first LUT game I bought... 4 years back, now. Wow, how time flies...

  Why?

  Because I had problems with excerpts from tapes and rarely found one I liked "such what ', so I got to work the clip after you apply the LUT as much as if I started from scratch. So why pay for the dang thing?

  I found it a good common sense many people in publishing & work of colorist, there is a certain tech LUT can really be able to use, but those who are mainly for the spendy 'pro' movie, Reds, Arris and other cameras. For a film DSLR & drone, making its own tends to work MUCH better.

  And it is easy within the Sg.

  Take this clip... watch your litters, first. Move the slider Temp for the position that balances the red & blue tops, cursor Magenta to balance the red & green tops... then left offset slider far a channel can be a little below '0', 0 to sentence above and one a little higher... then with keyboard and mouse or a simple trackball, move the color slider controls rather than wheels "unlock" the trio Offset, match the bottom just above 0, reset the summits if necessary and then return to wheels.

  Move the controls in Gamma Luma needed to feel 'brightness', and you have a a neutralized clip. Shouldn't take more than 20 seconds to do the above, if that.

  Now using color wheels, started working for a 'vision' and of course use secondary as necessary to adjust certain colors/colours/brightness and maybe go to controls Shadow & Highlight to get finer control of two Luma and chroma on the edges... in general, it is best to bring the ends of the scale to neutral even with a look hot or cold for most of the signal.

  Get something you like and can be used for a large number of your clips, save it as an eye. You can just quickly apply to any other work.

  You want to use in PrPro? Easy... with the right button on the Look to the Sg, choose 'Export', and you get to the options... except that say a Cube of however many points you want to and tell him where to save it. I found that with my GH3, sometimes with work in the open air with a sky bright-ish with the Sun around but just outside of an edge banding is quite possible... and 'hand-kitchen' these clips or using a Cube 64 - point is necessary.

  Neil

• Nesting affect the BRUTE of a clip color depth?

  Basically, the scenario is: I have a clip I shot in RAW at 60 fps and am nesting to change the playback speed and apply the stabilizer of the chain. If I color correction after the clip of nesting, first read the clip nested as a new clip without the gross color depth? I don't know I explain my question well enough, but I hope you get the picture.

  Thanks in advance!

  Short answer, no.  You good to go.

• Old iMac OS upgrade

  I have an OLD iMac (screen base, ball gum on a stem) 10.4 running. Extent to the top of the chain of the BONE can be improved?

  You can check here:

  http://support.Apple.com/kb/SP517

  If she can run Leopard OS 10.5. If you buy a Leopard retail on eBay or Amazon installation disc and then update OS 10.5.8

  Some general tips on the update of Leopard:

  It should be noted that it is an extreme rarity for the updates to cause upsets to your system, as they've all been beta-tested, but they can reveal pre existing, especially those that you may have been unaware. If you are actually aware of all seeds, make sure they are fixed before continuing.

  So before do you anything else:

  If you can, perform a full backup first to a hard drive external. Ideally, you should always have a clone bootable from your system that allows you to return to the State of the previous update.

  Disable mode "Eve" of the display and the hard drive.

  Disconnect all devices except the keyboard and mouse.

  1 repair permissions (in disk utility)

  2. check the State of your hard drive using disk utility. If defects are reported, again from your installation disc (by holding down the C key), go to disk utility and repair your startup disk. Restart again to return to your boot disk.

  At least now you can be reasonably certain that your system does not contain obvious defects that could lead to an update/upgrade fails.

  3. download the correct version of the COMBO update from Apple download site.

  The Combo in Leopard 10.5.8 update can be found here:

  http://support.Apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update

  If you prefer to download updates via software update from the Apple menu (which would ensure that the correct version for your Mac is being downloaded), it is not recommended to allow SU automatically installs updates major (and even minor). The value software update to download the update without installing it immediately. There is always the possibility that the handset download and install (which can be a long process) may be interrupted by a power outage or your cat walking on the keyboard, and a missed installation will almost certainly cause havoc. Once it is downloaded, you can sit at a time that suits you. In case you need a reinstall, you make a backup copy of the update on a CD.

  Details of the 10.5.8 update here: http://support.apple.com/kb/HT3606

  More information on the use of Software Updater here:

  http://support.Apple.com/kb/TA24901?viewlocale=en_US

  The Combo update ensures that all system files that have been changed since originally 10.5.0 are included, and those who could rate or subsequently damaged will be repaired. The updated Delta, although a city more small download, only takes you from the previous version to the new one, that is for example, 10.5.7 to 10.5.8. Software update will usually download the Delta update only. The best Combo update must be downloaded from the Apple download site.

  Now, follow these steps:

  4. close all the applications and turn off the power the screen saver and energy-saving.

  5. unplug all devices except the keyboard and mouse.

  6. install the update/upgrade. Under no circumstances interrupt this procedure. Don't do anything else on your computer while it is installed. Be patient.

  7. when it asks to restart the computer to complete the installation, click on restart. This can take longer that usual, there are probably thousands of files to be crushed and placed in the correct location. Doing nothing while this happens.

  8. Once your Mac is awake, repair permissions again and you should be good to go!

  If your Mac seems a bit 'different' or slow, do a second reboot. It can't hurt and is sometimes effective. In fact, a second restart may be recommended.

  9. open some of your most used applications and verify that everything is OK. In this regard please remember that not all manufacturers of third-party applications and plugins, modules, etc., haxies will have had time to do rewrites for their software to be compatible with the latest version of your operating system. Give them a week or two while you regularly check their Web sites for updates.

  NB. do not try to install two different updates at the same time that everyone can have requirements and different exercises. Follow the recommendations above for each update in turn.

  Finally, from Apple's own article on the subject of the software update can also serve as reading:

  http://docs.info.Apple.com/article.html?artnum=106695

  If you update Safari (or simply):

  Input from third-party handlers can do as much harm as well. They use a vulnerability for the right hand in your application code and modify the code that the application starts.  If you have installed an update of the OS and Safari crashes, the very [i] first [/ i] thing to do is clear on your InputManagers folders (both in your own library and in the top-level / library), disconnect and reconnect, and try again.

  So, disable all third-party modules before the update of Safari, because they may not have been updated yet for the new version. Add a return to one. If something goes wrong, remove again and check on the Web site of the manufacturer of the software for the new of an update to match your version of Safari.

  Most of the errors reported here after an update is due to an inherent flaw repaired or not detected in the system, or a third-party add-on.

  Additional advice on the installation of the software here:

  http://docs.info.Apple.com/article.html?artnum=106692

  Again, input Manager reach directly in an application and modify its code. This puts the behavior of the application concerned outside the control and responsibility of its developers: a recipe for problems. Who doesn't want to not not saying that questions absolutely ensue as a result of the entry Manager, but, as a user, you decide. If a manager of specific entry or a set of it functionality is really important to you, you may well choose to assume the associated risk.

  Once again, the Council is to remove all the input managers the following directories:

  • / Library/InputManagers
  • ~/Library/InputManagers

  especially before the system updates (they can always be added one by one back later).

  Troubleshooting, installation, start-up and connection in Mac OS X v10.5 problems

  http://support.Apple.com/kb/TS1541?viewlocale=en_US

• Need VGA adapter for my old iMac G4/1.0 17 inches in 2003?

  Hello

  Today my old iMac monitor stops working. I was in several stores to try to get a VDG adapter to connect a monitor separated instead. But it is impossible to find one for this older model. Any ideas anyone?

  The specifications are:

  Apple iMac G4/1.0 specifications of 17 inches (flat screen)

  Identifiers: iMac 17 "1 GHz - M8935LL/A - PowerMac6, 1 - M6498 - 1956

  requires Apple VGA Display Adapter

  Thank you very much!

  Johan Vikingo

  The "Mini VGA / VGA adapter" takes many forms. Do not forget

  If you get through one in a page of online sales, the seller knows

  the differences between the "MiniDisplayPort to VGA' and others.

  The part you are looking for would probably be described as: Mini VGA / VGA.

  While I have a stock of old like new, bought since a few years there

  thrift store for $2. It works with my iBook 1.33GHz G4 12-inch

  There is no part number visible on what I say. At the time, I have

  also bought three others, same price, which were sealed in bags.

  (These fellows had reference numbers;) I gave them, at the time.)

  Beware also of MiniDVI-VGA adapters, because these can also or

  is not appropriate in the similar-shaped video out port; DVI was not a

  standard in the old PPC Macs, some PowerBook later + iMac G5

  a establish better conditions later than the old PPC G4 iMac or iBook G3.

  The same element that adapts iBook G4 mid-2005 or before should also

  mount the USB2.0 iMac G4 15/17/20 inches. The adapter I have my

  iMac G4 1.25 GHz 17-inch (USB2.0) port VGA Mini computer.

  A glance through eBay shows a mixture of different parts and customers

  show them that some sellers have sold more than one type via their

  site; Some users could not use the one they bought, others might.

  The Apple site does not seem to show any valid age

  more information regarding these vintage/obsolete adapters.

  In order to avoid some versions of Mini VGA MiniDisplayPort and MiniDVI

  adapters; Some versions are at the correct time, but for PowerBook

  G4 models and a few figures are different part numbers. The plug

  may be formed to fit the plug, but it lacks the appropriate connectors.

  Sorry to not be of a great help; I look to see if I could find an of the

  old Mini VGA / VGA adapters, here; & only found a w/o part number.

  A search shows almost everything except good vintage pieces.

  The site welovemacs.com had a few elements but was not unclear on what made

  specific models exactly; and their price seemed a bit steep. Another Mac

  centered on the sites may be able to locate the vintage adapters. Can be used

  available, then that can also be worn or unreliable.

  This page may have some info on various 'news, in the old, obsolete: adapters

  On Apple and cables - video cards Support Apple

  {None of these are good; so you can use this as an anti reference}

  The person here specifies no iMac G4:

  https://www.iFixit.com/store/Mac/Mini-VGA-to-VGA-adapter/IF153-030-1

  Maybe if the time was nowhere near 02:00 here, I have more chance to research...

• Can I use my old machine of time that has been used for an old iMac 2010 to retrieve files on my new iMac?

  My old iMac 2010 is ready to retire and I want to recover all my files to an old time machine to my new iMac with the retina 5K.  I haven't started the configuration with my new iMac yet but I wonder if I can recover my files from my old machine of time.  I'll use a new external hard drive as the time machine for the new iMac well.  How can I recover old files from my old machine of time if the new time machine is connected to my new iMac?  Help, please.  Thank you very much!

  Using the migration assistant is the way to go.

  Move your content to a new Mac - Apple Support

  How to move data to your new Mac using Mountain Lion and earlier - Apple Support

  Hope this helps, good luck to you.

• Can I connect my old iMac (with no wifi capabilities) to the internet using the cable to my MacBook?

  I have an older iMac (PowerMac 6 bought in 2003) that only connects to the internet via a cable directly to the router. I moved this computer out of the range of the router and you want to connect to the internet again. I also have a MacBook (late 2009), which has Wifi capabilities. Is it possible to connect the old iMac to the internet via the MacBook?

  Yes, this should be doable. On the MacBook, go to the system Pref > sharing > turn on internet sharing via the Ethernet port.

• Passwords Firefox inside old iMac to MacBook Pro new

  Hello:

  I tried to use the add-on, exporting password. He works for export from my old iMac but when I tried to install exporter of password on my new MacBook Pro running Firefox v37.0.2, I get the message "password exporter could not be installed because it is not compatible with Firefox 37.0.2.".

  So . . . .

  Is there another way to export and then import Firefox passwords?

  Thank you

  Thank you!

  I've used both and they both work.

  First of all, I transferred the files logins.json and key3db of my old Firefox my Firfox again on the new MacBook Pro. Alto! It worked!

  Then I registered Firefox Sync. It will be the end of my problems to keep up-to-date on both computers.

  BTW. I discovered that both computers running Firefox v37.0.2. Apparently the problem is with the password exporter. It cannot be installed on Firefox v37.0.2, but if it is installed before you upgrade to Firefox v37.0.2 that he continues to work.

  Thanks again!