10 gR2 on Win 2008 Server

Similar Questions

• Oracle 11 g 2 on WIN 2008 Server R2 on top of Citrix XenServer 5.5

  Hello
  
  According to the policies of Support Unbreakable Linux to virtualization and emulation:
  "Oracle products are not certified to run on the operating systems on top of Red Hat, Novell SLES or Citrix XenServer Enterprise Edition Xen hypervisors."
  
  This applies in my case: Oracle 11 g 2 on WIN 2008 Server R2 on top of Citrix XenServer 5.5 (or only if I have a Linux distribution installed on top of Citrix).
  And does that mean exactly?

  That is absolutely right.

  Nicolas.

• Fixing bad block on the Win 2008 Server backup volume

  Since win 2008 backups mount the volume but do not assign a drive letter to the backup volumes, what is the best way to check for bad blocks on a backup volume? Is there a special way to run chkdsk? Or I have to remove it from the backup pool, format, assign a drive letter, run chkdsk and then try to add it to the pool?

  Hello

  The question you have posted is related to the server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Win 2008 Server iSCSI San installation

  Hi, Im trying to install win server 2008 on a discovered iscsi lun. To do that I need to load my kmdf basic bus driver and one pilot iscsi initiator additional in order to discover the LUNs during installation.

  Win 2008 has 1.7 kmdf library by default. So to install 1.9 kmdf library in it, I added the Windows6 package. 0-KB970158 - x 86 .cab in the install.wim file. With this, the installation is complete. But when the operating system starts for the first time, my bus kmdf driver does not load completely. Only the Driverentry routine is called. EvtAddDevice routine is not called. So, accordingly, I see a BSOD saying that boot partition not found. Any kind of suspicion would be useful.

  This forum is for Vista.  I suggest you use the Technet Windows Server forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Effect of bringing a child to a Windows Server 2008 VDMK to an another Win 2008 Server

  I was looking for the product documentation, communities and delivery over the Internet, but I fear that I am using the wrong keywords.

  The trail has gone cold, and I'm here.  I work with the Client of VI 2.5.0.147704 connected to vCenter.

  SVR1 = I have a virtual machine with 2008 standard which has a C: partition for OS and a D: drive with data on 'the island '.

  SVR2 = I have another server with 2008 which was just a disc parent - the C: partition.

  All discs are in the same data store and I am responsible for the backup of my data before proceeding.

  I want to stop SVR1 and move the SVR2 VMDK, but I want to perform due diligence before making the move.

  I think I need to go to the correct data store and move the SVR1_1.vdmk of the SVR1 folder to the SVR2 folder.

  Then, I want to rename the VDMK of SVR1_1.vdmk to SVR2_1.vdmk.  Here are my questions...

  1 when I move the drive, can I just move the secondary image (the disk "_1") or do I need other files related to disk?

  2. when I boot SVR2, can I import the disk in Windows and assign it the letter D:?

  3. have I accounted for all the appropriate things associated with something like this?

  If someone is able and willing to help with this issue, any help would be appreciated.  Thank you.

  I practice the planned move. Use the stand-alone converter tool to make a copy of your destination server to a new virtual machine on the same ESXi host. COPY the VR1_1.vdmk on the newly created virtual machine and add the vmdk on the server. Change the settings to disconnect from the NETWORK card and test your virtual machine to make sure that the installation works as expected.

  The SVR1_1.vdmk that display you in the data store Navigator is actually composed of 2 files. The SVR1_1.vdmk is actually just a text file descriptor describing the vmdk. The data is actually stored in SVR1_1 - flat .vdmk, whereby it is not visible in the browser. When you do a copy to move the SVR1_1.vdmk using the browser data store both the SVR1_1.vdmk and the SVR1_1 - flat .vdmk file is moved or copied. If you use another tool or the command line to move or copy, you must make sure that you move or copy the two files.

  Adding a windows vmdk is no different than adding a disk on a physical machine. Once you have edited the machine virtual and added the disk, it will be automatically recognized by Windows. If you add HOT then you will need to use the Manager of Dick rescan the disks so that it is visible. It will automatically take the next drive letter as it would on a physical machine.

• cannot log on to the domain Win 2008 Server using W7

  When I join domain he managed,

  but when I try to log on to a domain, that he has failed,

  There is place...

  When I get back the user name, password and press enter

  "Welcome...". »

  but at the point where its change to "end the session...". »

  hope you help me.

  When I join domain he managed,

  but when I try to log on to a domain, that he has failed,

  There is place...

  When I get back the user name, password and press enter

  "Welcome...". »

  but at the point where its change to "end the session...". »

  hope you help me.

  Hey catra abdessamad

  Here is the vista forums

  Repost in instances of server on the link below

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb250589.aspx

  Walter, the time zone traveller

• I'm going to 2012 SQL file of the box and you want to run on Win 2008 Server. can you please how can I perform a unboxing conversion it

  I can how to perform a conversion unboxing of the file .box executed as for the installation of SQL 2012 .exe file.

  These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/categories/ .

  Thank you.  :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• Out with the old WinXP box in with Win 7 - recognition problems 2008 Server box

  Our box office WinXP was finally cut off (the last, all the others are Win 7).  I built a new area of Win 7/64 with Windows 7 Professional.  I was able to transfer all the old stuff from WinXP on the server by using the parameters of conduct transfer agent.

  I plugged the new Win 7 box and everything works fine.  However, I can't get our Win 2008 Server to recognize the new box.  User dave is there but the server does not see the new box.

  Q: should I remove user "dave", and then reinstall a new "dave" at the server level?  Seems that I would lose settings, etc. like this.

  I've been going through Hester and Henley on Admin book, but nothing comes out with me.

  If you have configured Active Directory, then you should be able to join your domain from the Windows 7 machine as you would for Windows XP. Please note that you may experience problems if your Local network connection is firewall, as well as temporarily disable and try again.

  http://www.notebooks.com/2009/11/11/quick-look-Windows-7-in-the-workplace-joining-a-domain/

• Satellite A300D-15B with driver Vista 32-bit for Win 2008 possible?

  Hi all

  I have a laptop A300D-15B, and recently I have installed Win 2008 (32 bit) and installed the Vista 32-bit drivers worked like dream. But when I install the card reader (O2) it crashes (blue screen)?

  has any one face this problem?

  any help?

  Thanks in advance

  concerning
  Ganesh

  > But when I install the card reader (O2) it crashes (blue screen)?
  Looks like this Vista driver is not fully compatible with Win 2008 Server and therefore you receive and BSOD

  Seems you have to use this operating system without this special driver

• We win 2008 r2 server, recently wereplaced the motherboard. activating windows asks now 27 days to credit.

  We win 2008 r2 server, recently wereplaced the motherboard. activating windows asks now 27 days to credit.

  Hello

  Versions of Windows Server are supported on the following forum. Please ask your question on the following link.

  Windows Server 2008 R2 General:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Concerning

• Change my Win 2008 and SQL Server on the server with SATA drives to the server with SAS disks

  I need to change my disks on my HP Server. Disco SATA Raid 1, I have to pass it to a server with SAS disks

  I haver Windows 2008 Server 64-bit installed SQL

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on MSDN. Please post your question in the below link:

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• Oracle 10g 32-bit (win 2003) to Oracle 11 g 64-bit (Win 2008)

  Hello
  
  I am a beginner on Oracle DB side. I have 2 Windows servers
  
  "Win Server A - current Prod" whose configuration is as follows
  
  O / s: win 2003 R2 sp2 (32-bit o/s)
  Oracle DB: 10.2.0.4 32bits
  DB Dimensions: 50 GB
  NLS_CHARACTERSET: AL32UTF8
  
  
  "Win Server B - to be new Prod" whose configuration is the following
  O / s: win 2008 R2 sp1 (64-bit o/s)
  Installation 11.2.0.3 planning software 64-bit db
  NLS_CHARACTERSET: AL32UTF8
  
  
  I need to move/migration/upgrade my db 10g and 11g db on the latest version of win o/s on ServerB.
  
  What are the options I have for db upgrade? After a little research on Google I did, it is what I found
  
  (1) OPTION 1: install 11.2.0.3 software on server B, create empty db, then take datapump exp of patterns non-system (from 10 g) and import it on 11 g
  (2) OPTION 2: do something through clone RMAN... not 100% sure how it works and what great advantage I have is going to get compared to OPTION 1
  (3) OPTION 3: install 10.2.0.1 on 'ServerB', upgrade to 10.2.0.4 via the Group of hotfixes. Then using the upgrade database Wizard, perform an upgrade of 10.2.04 to 11.2.0.3. I don't know if 10.2.0.4 is compatible with Win 2008 R2 SP1.
  
  Option 3 is seems to be safer and better.
  
  Can someone give me some advice, metalink not. who can put me on the right track. NLS_Characterset remains the same.
  
  Would there be a problem due to the fact that 10g we use is 32 bit and we would go to 64-bit Oracle.
  
  Concerning
  
  Learner

  The simplest option uses the Data Pump utilities.

  If your application uses only some of the schema, export/import only those schema.

  Please do it on a test first, configuration so that you can test the connection and the behavior of applications.

  Thank you.

• laboratory test for 2008 Server and clients

  I'm new to vmware and I hope to have a preview on if or how I can create a mini enviornment for testing 2008 Server and clients.

  (Study for MCITP)

  I am running:

  Windows 7 Professional 64 using vm worksation 7.1.3

  Intel Core2 Extreme 6850 @3.7 GHz

  8 GB RAM

  RAID 0 SSD

  Guest operating system located on 2 drives internal seagate 7200 RPM

  Linksys wrt300n router

  I already did a team and installed (1) Server 2008R2, (1) WinxpSP3, Ent of Win7 (1), Clone of Ent Win 7 (1)

  I would like to install 3 server roles, AD, DNS and DHCP for beginners.

  I am considering establishing a separate virtual lan for systems work in that I can do my tests.

  Providing a static IP address for the server and using dhcp by server for customers of victory.

  I also want to create another team, so I can do some tests with SBS 2011 so without interfering with the first team and or my home network

  Any advice or comments would be greatly appreciated.

  Thank you

  I thought that someone has already done and was hoping a ' oh yes, that's what you do, it's easy "answer...

  Yes I could do that and these questions have already been answered ad nauseam, but I'll tell you why I do not give indications of the steps step-by-step when I see things like "(Education pour MCITP)" and it's because if you can't figure it out on your own, you are not qualified to be a professional anything whatsoever in my book! "   Now please don't take that as harsh as it may seem I have really don't mean that highly however the point I'm trying to do is, especially when it is currently professionally, with labour or professional certifications, I certainly don't expect any who all know on a given topic a, but what I expect is a part to be able to find the answers that are already out there When it is not the very first person to come across a given number.

  I gave the server a static ip address, I booked on the router and used in bridge for the adapter. AD and DNS has worked well, but the dhcp service has failed. It seemed at odds with the dhcp router.

  Of course, it will conflict with router DHCP Server of the local physical network when you use bridged on a virtual machine running a DHCP server, it is basic networking question.

  Is there a way to do a virtual router? I want the team to be separate and not have the ability to 'see' my dhcp router, or any other PC.

  But I need to pull the static information and dns somehow.

  It's there, reading the chapters 14 and 15 are along with networks in general orders and there are several diagrams in these two chapters which, in my opinion, help to give you the answers to these questions.

  There are several ways to reach your goal and I know for a fact that he has already covered by these forums and other places on the Internet it seems ridiculous to repeat it once again here and beside that you really learn if responses are just handed to you vs student, research, practice, etc..

• Win 2008 x 64 guest OS does not recognize x 64 processor

  My host system is Windows 2003 x 64 standard running on 2 quad intel EM64T processors. I am running VMWare Server 2 (latest version) and reports processors as "Intel (r) Xeon E5405 @ 2.00 GHz - 2 x 4 cores of CPU processors". When I run "VMware-guest64check - 5.5.0 - 18463.exe" he reports "the host is capable of running an operating system to 64 bit comments under this product VMWARE." but when I install Win 2008 x 64 standard after installation when it restarts it comes up with an error indicating "" Info: attempt to load a 64-bit application, however this CPU is not compatible with 64-bit mode. "the message is coming from the boot of Win 2008 Manager but I do not know why." Anyone else know?

  ?:|

  Thank you

  Dwayne

  Welcome to the forums.

  You have Intel virtualization technology setting enabled in the system BIOS?

  You will need to run 64-bit guests.

  Then enter your bios and enable the setting.

  Then turn the system completely so that the settings take effect.

  Then turn on your system a turn to your installation.

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

• EBS R12 - Win 2003 Server R2 Standard Setup error

  Hi Experts,
  
  It's my 8th attempt to install EBS R12 and got the same error.
  OS - Win 2003 Server R2 Standard.
  used CYGWIN, MS Visual C++ 2010 and Strawberry Perl.
  Used Oracle E-Business Suite R12 installation Windows XP steps followed all the steps... Finally even error...
  
  http://www.mediafire.com/?najx7zk8zl780x8
  
  in the link above, I've added all the screenshots of th and the log files.
  1. can I use MS Visual C++ 2010?
  2. can I use strawberries Perl?
  
  Can someone help me please... Please let me know if you need any additional info or any other file of log...
  
  Thank you
  DK

  I tried again, installation with perl 5.x and Visual c ++ 2008. And got the same error... think you can change the operating system from Win 2003 to Win 2008?

  It may be useful, but I can't confirm that, until you try the operating system.

  For the moment, I see two options-
  try to use oracle enterprise linux,
  Deployment Oracle VM model...

  I would recommend OEL.

  Thank you
  Hussein