10 issues in vmware with markets resolvation

Similar Questions

• Issues related to the market

  Anyone else having problems to download or update of the market?

  I get an orange exclamation point and it is said in class, but nothing else happens.

  johnnnyo1> there is a setting that denies the possibility to download from the market when the data only

  settings > battery Manager & data > data saver > turn it off (read the list of questions that will not happen with that active)

  search with other data settings too...

  other that that... many people do report problems with long expectations with market market so-called 3.1.3 3.1.5 is available

  nyse133> try an erasure of the data of the market, it should simply be using a google account setup in the phone itself

  Yes, Buffalo , it's a horrible update... a lot of people have a lot of problems with the slowness and the stability of the new market

• I can't uninstall IncrediMail with markets listed in the control panel.

  Original title: impossible to uninstall

  I can't uninstall IncrediMail with markets listed in the control panel. I have Dell Windows Vista

  Hi Anneloye,

  Please use the forum for Support of Vista,

  It's the Q / A about uninstalling IncrediMail site:

  Q: How to uninstall IncrediMail?

  R: to uninstall IncrediMail, simply do the following:

  1. Click the Windows 'Start' menu, scroll to 'Programs', select "IncrediMail" and click "Uninstall IncrediMail".

     Note: When you uninstall IncrediMail, you will lose all unsaved data. It is recommended to backup your IncrediMail data before uninstall, in case you want to use it later.

  2. Select the option "Uninstall IncrediMail" (marked in red) and click 'Next' (marked in blue). When asked to verify the uninstallation process, click 'yes '.

     

  3. Once the uninstall is complete, reboot your computer.
  4. Navigate to: C:\Program Files\IncrediMail.
  5. Remove the 'bin' folder to completely remove IncrediMail from your computer.

  Hope this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Adding datastore in VMware with dell perc5.i after enabling vt - d

  Dear community of VMware,

  I have a problem with my v5 sphere adding datastore in VMware, the problem comes when I put the vt - d on enable. I have my store of data on raid 5 with a dell perc5.i. When I enable this feature my data store went from raid controller. Another point, when I do a new raid with en disks try to add it, I noticed that when it is being initialized, I can add the store of data without any problem. But after that is done initializing it went again.

  Now maybe you think why put vt - d j my setup is that I want to make my virtual nas/san inside vmware with freebsd, and I need to get through to my tape drive, connect to my backup server.

  No one knows what might be the problem or is it simply impossible if you turn on enable vt - d, you can not use the raid controller in the PCI-E slot more data warehouses, but just to get through?

  Other info I already have my sphere of VMware on USB

  I thank very you much in advance!

  With sincere friendships.

  Emiel

  in the community, I've seen a few posts, where they said there are some problems of hardware compatibility with perc5i and vtd, the challenge is to use perc6

  Some say to upgrade firmware for some versions of LSI perc consult the links below

  http://communities.VMware.com/message/1826092

  http://communities.Intel.co.jp/thread/20540

• Hi need help to connect to my redhat on vmware with host win xp... Please

  Hello
  
  I installed my oracle 11.5.10 in redhat4 linux VMware with win xp sp2 as my host OS
  
  therefore not able to open the Microsoft windows xp browser oracle applications Manager
  
  I gave a loopback for xp wixn adapter with
  
  IP 192.168.0.22
  
  and gateway and dns as 192.168.0.11 - is also the ip address of the linux redhat on vmware
  
  also I have the default gateway give for redhat linux as 192.168.0.22 - I want to tell the loop back IP address
  
  I could do a ping to 192.168.0.22 and 192.168.0.11 from the win command prompt
  
  and linux, I ping the loopback adapter, it is not ping
  
  .....................
  as an additional comment
  
  
  my web apps oracle address
  
  is
  http://Shiva.HyD.com:8001 is the homepage of opening and not to open the pages of additional connection for OAM and EBS, but when I give the address
  
  as http://192.168.0.11:8001, then it will open even the login page but won't connect to OAM or EBS
  
  
  Help, please
  
  
  Shiva

  Salvation;

  Problem solved? You can open login page now?

  Respect of
  HELIOS

• In the firewall, under the Advanced tab, have error that says: "the network connection settings have been corrupted. It is the last issue after problems with Windows Security Esstentials

  Essentials security Windows stop working and firewall has been disabled. Security Essentials showed a sirefe virus, I think. I was finally able to remove and reinstall security essentials and turn on the firewall. However, I have now several problems.

  Windows Update does not seem to work. It is said it is download and install the update, but the window keeps popping up saying I need to install the updates, and it's the same updates that have been installed just.

  Cannot run updates on financial software or other programs.

  Cannot run an automatic Microsoft patches to resolve firewall issues.

  Running Windows XP Media Center Edition, 2002, Service Pack 3

  A registry cleaner or any third party Cleanup utility was run on your system?

  You are in the habit of using "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare 5; Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; Advanced System Optimizer. TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. CCleaner,)?

  Moreover, these registry cleaner programs are snake oil.

  They don't help and can cause problems, so try to avoid them.

  When you open the firewall applet Windows (firewall.cpl) and click on the Advanced tab, the following error message may appear:

  Network connection settings have been corrupted. To resolve this problem, click default settings. This will remove all your Windows Firewall settings, and this might cause some programs to stop working.

  

  Resolution

  • Click Start, run. Type services.msc and press {ENTER}
  • Double-click Windows Management Instrumentation
  • Set the startup type to Automatic
  • Click Start to start the service.

  Then run these commands to start, run dialog box:

  WinMgmt/regserver
  regsvr32 "% Windir%\system32\netshell.dll".
  regsvr32 "% Windir%\System32\hnetcfg.dll".
  regsvr32 "% Windir%\system32\wbem\wbemprox.dll".
  regsvr32 "% Windir%\system32\wbem\wbemsvc.dll".
  regsvr32 "% Windir%\system32\wbem\wbemcore.dll".
  regsvr32 "% Windir%\system32\wbem\fastprox.dll".

  UTC/GMT is 18:39 Wednesday, June 20, 2012

• Angular 2 http.get () fails with "cannot resolve the host name.

  I am trying to get 2 angular (well, ionic 2 actually, but the call failure is part of the kinetic moment) to shoot some json from the web. My code works fine on iOS or Android (via Cordova), but fails on any call http.get () on 10 of BlackBerry. Initially, I had problems because I did not in the whitelist the URL I was trying to download, but after whitelisting now runs the get call, but always fails. The error message "cannot resolve the host name.

  Does anyone have an idea why angular is unable to resolve an external host name when running on BlackBerry 10?

  Never mind... my bad. I encounter this problem when running my Ionic/angular application on a simulator. For me to get always consistent on many simulators BB10 different IP addresses I've run, rather than to allow VMware Player feeding the DHCP server (because it does no reservations of IP), I run a TinyCore Linux server on the same virtual network as simulators, just so that I can use DHCP on the instance of TinyCore instead Allowing no reserves. Unfortunately, I did not complete the configuration of TinyCore properly so nothing on the virtual network becomes a valid gateway or the DNS server list to access the outside world.

  When I run my application on my Z10 physics, it works fine.

• Balancing of VMware with Nexus 1000v

  With the vmware puts vDS or vSS, I see many designs use the asset-liability approach for binding rising consolidation of NETWORK cards, IE a vmnic is active will fabric and a vmnic is passive will fabric B. This setting is configured in vSphere.

  Se this article: http://bradhedlund.com/2010/09/15/vmware-10ge-qos-designs-cisco-ucs-nexus/

  Is this correct, that we can put in place a regime with the 1000V? All the network is on the 1000V config, and as far as I know, we can only configure the uplink in these 3 modes:

  1. LACP 2. vPC-Host Mode 3. vPC-Host Mode Mac pinning

  and they are all 'active' based.

  Post edited by: Atle Dale

  Yes.  All uplinks are used.  Each VM virtual interface is pinned to one of of the uplinks.  If one uplink goes down, all interfaces pinned gets dynamically likes to remaining uplinks.  A mac address will only see on a single interface at a time.  This is how MAC pinning prevents STP loops.

  Robert

• vCenter 5.1 / issue of profile with permission to the domain of home user

  Hello

  I want to set a local permission on our ESXi 5.1 servers using profiles of the host.

  Also, I have set up the authorization to "Configuration/authorization rules/rules/authorization security clearance:

  -Need an authorization rule

  -User name: domain\nagios

  -not a group

  -ReadOnly

  -Spread

  It works well, and this permission is configured. Strange thing is that the check host profile fails with:

  "Agios domain group or user permission does not exist.

  I guess that the '\n' in 'domain\nagios' Gets misinterpreted.

  Any help appreciated.

  Kind regards

  Open an SR with VMware and they sent me this, who actually contributed to:

  http://KB.VMware.com/kb/2063296

  Kind regards

• Creating an image full of VMware with API Perl tree?

  I'm fairly new to perl and VMware which I think is a double whammy... but here is the question I have.

  I created a script that will look at all data centers:

  My $dc_view = Vim::find_entity_views (view_type = > 'Data center', properties = > ['name']);

  then loop through the hosts of... data centers and continues through the virtual machines to hosts...

  What I found though, is that some of the guests are clustered and others are not.

  How can I determine which cluster a host is in? or even if she is in a cluster?

  Thank you

  Robert

  I think I found the solution... too long that I limit the properties that it is fast enough to loop through everything.

  So I find... data centers go to guests... then check for a property of cluster hosts... then proceed to the virtual machines on the host.

  This kind of like start - download level - check level - and then to the low...

  Here's the script. {I could be a} brace off the coast but should work as expected.

  # #GET centers with limited DATA properties(important!!! for speed) #.

  My $dc_view = Vim::find_entity_views (view_type-online 'Data center', properties-online ['name']);

  # #LOOP DATA CENTERS.

  foreach {$each_dc(@$dc_view) my

  If ($each_dc) {print ";} else {print 'notfound' ;}}

  Print "is the name of this data center." $each_dc-> name. » \n\n » ;

  Print "> \nHosts on this Datacenter:\n."

  # #GET THE HOSTS(IMPORTANT include the PARENT property) #.

  My $host_view = Vim::find_entity_views (view_type-online 'HostSystem', properties-online ['name', 'parent'], begin_entity-online $each_dc).

  foreach {$each_host(@$host_view) my

  ' print '\n\t".$each_host-> name.' \n";

  # #GET THE CLUSTERS(IMPORTANT this is going up the chain with mo_ref) #.

  My $cr_view = Vim::get_view (mo_ref-online $each_host-> mother, view_type-online "ClusterComputeResource");

  # #IF STATEMENTS ARE IMPORTANT IF A HOST IS NOT IN A CLUSTER TO PREVENT PERL TO THROW ERROR #.

  If ($cr_view-> name) {}

  Print "name of the Cluster. $cr_view-> name. « \n\n » ;

  }

  # #GET THE VMs (IMPORTANT include the PARENT property).

  My $vm_view = Vim::find_entity_views (view_type-online 'VirtualMachine', properties-online ['name'], begin_entity-online $each_host);

  Print "\n\tVirtual Machines on this host: \n";

  foreach {$each_vm(@$vm_view) my

  print '\t\t".$each_dc-> name.': ';

  If ($cr_view-> name) {}

  print «» $cr_view-> name. "::";

  } else {}

  Print "VACUUM:";

  }

  print $each_host-> name. » :: ". $each_vm-> name. » \n » ;

  }

  }

• brush lag issues and latency with the Brush tool

  Since the update I have problems of serious lag with my brush tool. I can't draw anything, because the program can not deal with my shots. I have a very capable office; What gives?

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  If you continue to see any questions send us an e-mail to [email protected]

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• Ethernet VMware with Cisco EtherChannel and Trunking Question

  Hello

  Trying to get our etherchannels works correctly with our network administrator. Here is our config with a few questions.

  1. as it is to create the trunk between switch and host directly, can I use spanning tree portfast chest edge ?

  2. when don't we use no ip address and when not for this configuration? I see online showing examples with and without it.

  3. in some articles, he described in access mode , while in others he said dot1q trunk mode. See here for the access mode. Admin think it should use dot1q.

  4 Etherchannel is fully support and preferred extending from links on maps, right? Not all of the links on the same card?

  5 is this the case in order to change the load balancing algorithm in vmware first or first to the work of cisco? I did first vmware. (IP-hash)

  It's on a series with 4 cards/blades 6500 switch.

  !
  interface Port-channel200
   switchport
   switchport access vlan 81
   switchport trunk encapsulation dot1q
   switchport trunk allowed vlan 69,81,172,896
   switchport mode trunk
   switchport nonegotiate
  !
  interface GigabitEthernet2/35
   switchport
   switchport access vlan 81
   switchport trunk allowed vlan 69,81,172,896
   switchport mode trunk
   switchport nonegotiate
   spanning-tree portfast edge
   channel-group 200 mode on
  !
  interface GigabitEthernet8/10
   switchport
   switchport access vlan 81
   switchport trunk encapsulation dot1q
   switchport trunk allowed vlan 69,81,172,896
   switchport mode trunk
   switchport nonegotiate
   spanning-tree portfast edge
   channel-group 200 mode on
  

  DITGUY2012 wrote:

  Wow Josh. If only you had written documentation. That's the trouble with him. People like me get final instructions, because we're not the guys from network 24 x 7. Great documentation would be layout, the reasons to go this way or that way you did just. That being said, here's my summary based on this discussion.

  1. we have several VLANS that descends from 3 links on the etherchannel. Thus, we should use mode trunk because there is not a single.

  2. we have an another etherchannel with just 1 vlan (vmotion), but in all of two links. This should be the access mode. Or is it still trunk because it's the multiple links?

  3. I don't know what crash dump logger is, or how it applies to my situation.

  4. I saw the bpduguard setting before what exactly is the syntax to use for us? 6500 series.

  5. I don't know if our switch would deliver on that port. How can I tell? At this moment I have switchport setting in there.

  Thank you!

  No problem for reference, the other question of documentation is one of the languages. Their word etherchannel on HP networking hardware, 'trunk' and has nothing to do with the discussion of port "access vs circuit", which they call "tag unidentified vs.

  1 Yes

  2. you would certainly make an access port.

  3. If your server never begins to have a problem with break, VMware can a copy of the accident for the debug log. You can see an article on setting up here: put in place the collector of Dump ESXi 5.0 | VMware vSphere Blog - VMware Blogs.

  4 I'm sorry I'm not familiar with this model

  5. I think if the switchport parameter is here and connectivity seems to work, you can consider yourself safe

• Why VMware WS 9 does not save its information in "~/vmware" with 12.04.1 Ubuntu 64-bit.

  Hi all

  Thanks in advance for your time to help.

  I just bought the upgrade of VMware 9 for use with Ubuntu 12.04.1 64-bit.

  The installation was smooth and I created 2 virtual machines (Ubuntu 10.04.4 64-bit) and Windows 7 64-bit and installed the VMware tools on both of them.

  But whenever I run VMware Workstation, I have a panel of the dialog box to accept the end user agreement!

  In addition, every time I want to start one of these 2 VM, VMware says: ' VMware Workstation should store user preferences and other information contained in the directory "~/.vmware".» You want to continue although VMware Workstation could not create this directory? ".

  Just after this first message, VMware said " install the VMware tools inside this virtual machine package. The repressive operations prompt starts, then select VM > install VMware Tools... and follow the instructions. "

  What is the problem and why VMware is unable to create its own "~/.vmware" directory and store its own information, like the fact that I have already installed the famous VMware Tools inside of my 2 VMs or already accepted the end-user agreement package?

  Any help would be greatly appreciated because the use of VMware Worksation as it's really boring.

  See you soon.

  PS: I did not have this problem with previous versions, 7 and 8 of VMware Workstation!

  Try
  CD/home/Dumby
  mkdir .vmware

• SAN storage 2 Gb fiber fast but slow on VMWare with direct access from Windows

  <! [endif] > <! [if gte mso 9] >

  So that's my problem, we use a HP MSA 1500 (I know,

  not that fast), but we run a small store, 4 guests, 30 total VM, 2 Broccade 16

  fiber ports to 2 GB, all force at 2 GB. The SAN as a controller 2 cache 512 MB

  each, discs MSA30 14 15 k 146 GB, 1 large raid 5, 1 spare label + / LUN 15, us

  also have a dedicated server, no VMWare backup and other applications,

  Server are all DL585G2 32 GB RAM. The MSA is running active/active, Latest

  7.2, Qlogicqla2342 firmware latest firmware. All the servers to update. We have many trya

  the scenario, VMWare 3, officially support VMWare 3.5 and 4.0 fully patch,.

  If I give my 2 Terabyte LUN 1 to my Windows 2003 server dedicated who

  have direct access to the San, will achieve a transfer rate up to 50 Mb

  per second on a 2 GB files. If a movement the LUN of VMWare server, start my

  virtual Windows 2003 Server (32 or 64 bit) and try the same transfer, max

  I realize is 5 MB per second. Add that on all the server of VMWare 3 version I have

  test, what I did wrong, we know that the SAN is capable of faster transfer, the

  test on HYPER-V with the same hardware configuration is much faster, my only

  last resource are you guys!

  Before you change the type of the startup disk controller, Windows should load the drivers for this controller. The best way to achieve this is to temporarily attach a small virtual drive (100 MB will do) with the controller for the virtual machine. When Windows starts, it must acknowledge the new controller and load the drivers. Then shut down the virtual computer, remove the temporary disk and change the type of the startup disk controller.

  André

• view of VMware with vmware 4.0

  Is it possible to view vmware vSphere?

  Does anyone of you know a step by step guide to install a vmware display driver?

  Thank you

  Everything works except the linked Clones, this is due to changes in vCenter in vShpere4. (applies to the ADAM instance and related modes), now that said, VMware are about to release version 4.0 of the software, it is completely compatible with vSphere.

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

  Tom Howarth VCP / vExpert

  VMware communities user moderator

  Blog: www.planetvm.net

  Writer on "[vSphere of VMware and Virtual Infrastructure Security: securing ESX and virtual environment | ]. http://www.Amazon.co.UK/VMware-vSphere-virtual-infrastructure-security/DP/0137158009/ref=sr_1_1?ie=UTF8&s=books&QID=1256146240&SR=1-1]'. Currently available on roughcuts