SAN storage 2 Gb fiber fast but slow on VMWare with direct access from Windows
<! [endif] > <! [if gte mso 9] >
So that's my problem, we use a HP MSA 1500 (I know,
not that fast), but we run a small store, 4 guests, 30 total VM, 2 Broccade 16
fiber ports to 2 GB, all force at 2 GB. The SAN as a controller 2 cache 512 MB
each, discs MSA30 14 15 k 146 GB, 1 large raid 5, 1 spare label + / LUN 15, us
also have a dedicated server, no VMWare backup and other applications,
Server are all DL585G2 32 GB RAM. The MSA is running active/active, Latest
7.2, Qlogicqla2342 firmware latest firmware. All the servers to update. We have many trya
the scenario, VMWare 3, officially support VMWare 3.5 and 4.0 fully patch,.
If I give my 2 Terabyte LUN 1 to my Windows 2003 server dedicated who
have direct access to the San, will achieve a transfer rate up to 50 Mb
per second on a 2 GB files. If a movement the LUN of VMWare server, start my
virtual Windows 2003 Server (32 or 64 bit) and try the same transfer, max
I realize is 5 MB per second. Add that on all the server of VMWare 3 version I have
test, what I did wrong, we know that the SAN is capable of faster transfer, the
test on HYPER-V with the same hardware configuration is much faster, my only
last resource are you guys!
Before you change the type of the startup disk controller, Windows should load the drivers for this controller. The best way to achieve this is to temporarily attach a small virtual drive (100 MB will do) with the controller for the virtual machine. When Windows starts, it must acknowledge the new controller and load the drivers. Then shut down the virtual computer, remove the temporary disk and change the type of the startup disk controller.
André
Tags: VMware
Similar Questions
-
Why is still as slow as Vista with copying files from Windows 7?
I expect Windows 7 to be quick to copy a file, as this has been one of the sour points with Vista. However, there is no difference! How can we get back to XP speed regarding copying files in Windows 7?
I expect Windows 7 to be quick to copy a file, as this has been one of the sour points with Vista. However, there is no difference! How can we get back to XP speed regarding copying files in Windows 7?
Background intelligent transfer service has been my problem.
Changed to manual/stopped.
Win 7 slow, moving and copying files, all fixed.
Update - BITS was not the problem. Do not disable.
After a new installation on a new HARD drive, I had the same problems.
I have an ATI FireGL v5600 graphics card. After I have updated to Feb. 2012 pilot, NO more problems.
I have long suspected that the graphics card was the problem. Problem solved for me.
Best advice: update all drivers as soon as possible.
-
Internet connection fast but slow to load web pages
I have a relatively fast internet connection: speed download - 60.5 Mbps; Download Speed - 6 Mbps.
I get the same results on my MacBook Pro running on the wifi and my iMac which is directly connected to the Ether. On the iMac, however, it is now holding always load web pages.
I've read elsewhere that changing the DNS can eliminate some of these problems. All this is a little above my pay grade.
I know just enough to make me stupid, but I am a good listener and I can follow directions well enough. Any help would be most appreciated!
Thank you
KLOS
Hello, KLOS,.
Thank you for using communities Support from Apple!
I understand that Web pages are slow to load on your iMac, but not on your MacBook Pro, while they are connected to the same network. If you use Safari, I suggest to work through the following steps on your iMac to see if you can alleviate the slowness.
If Safari is slow, unresponsive, which closes unexpectedly, or has other issues - Apple Support
See you soon!
-
Query in Oracle 10 fast but slow in Oracle 11
Hi all
We have a query that runs smoothly in Oracle 10 g. It takes less then a second. We installed a second server and import/export to create the same 11g database. On this 11g database query takes a long time (like 8 seconds or more).
Here are the details. Maybe someone can tell us the reason why this happens.
We are talking about this statement:
Version of database is 11.2.0.1.0Select nvl(sum(BM_OPENST_D - BM_OPENST_CR),0) from bh.bh123gh where F123_AR_NR>='4400000000' and F123_AR_NR<='4404000000' and F123_KL_LEV_AR_NR='0631001000' and SRT_REK=2 and F123_BKJR>=0000 and F123_BKJR<=2011 and F123_FIRMA=2;
The trace output:SQL> SQL> show parameter optimizer NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ optimizer_capture_sql_plan_baselines boolean FALSE optimizer_dynamic_sampling integer 2 optimizer_features_enable string 11.2.0.1 optimizer_index_caching integer 0 optimizer_index_cost_adj integer 100 optimizer_mode string ALL_ROWS optimizer_secure_view_merging boolean TRUE optimizer_use_invisible_indexes boolean FALSE optimizer_use_pending_statistics boolean FALSE optimizer_use_sql_plan_baselines boolean TRUE SQL> SQL> show parameter db_file_multi NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ db_file_multiblock_read_count integer 6 SQL> SQL> show parameter db_block_size NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ db_block_size integer 8192 SQL> SQL> show parameter cursor_sharing NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ cursor_sharing string EXACT SQL> SQL> column sname format a20 SQL> column pname format a20 SQL> column pval2 format a20 SQL> SQL> select sname 2 , pname 3 , pval1 4 , pval2 5 from 6 sys.aux_stats$; SNAME PNAME PVAL1 PVAL2 -------------------- -------------------- ---------- -------------------- SYSSTATS_INFO STATUS COMPLETED SYSSTATS_INFO DSTART 03-30-2010 11:05 SYSSTATS_INFO DSTOP 03-30-2010 11:05 SYSSTATS_INFO FLAGS 1 SYSSTATS_MAIN CPUSPEEDNW 1183.90219 SYSSTATS_MAIN IOSEEKTIM 10 SYSSTATS_MAIN IOTFRSPEED 4096 SYSSTATS_MAIN SREADTIM SYSSTATS_MAIN MREADTIM SYSSTATS_MAIN CPUSPEED SYSSTATS_MAIN MBRC SYSSTATS_MAIN MAXTHR SYSSTATS_MAIN SLAVETHR 13 rows selected. Elapsed: 00:00:00.03 SQL> SQL> explain plan for 2 Select nvl(sum(BM_OPENST_DEB - BM_OPENST_CR),0) 3 from bh.bh123gh 4 where 5 F123_AR_NR>='4400000000' and 6 F123_AR_NR<='4404000000' and 7 F123_KL_LEV_AR_NR='0631001000' and 8 SRT_REK=2 and 9 F123_BKJR>=0000 and 10 F123_BKJR<=2011 and 11 F123_FIRMA=2; Explained. Elapsed: 00:00:00.10 SQL> SQL> select * from table(dbms_xplan.display); PLAN_TABLE_OUTPUT ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Plan hash value: 3488495774 ------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | ------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | 38 | 1792 (1)| 00:00:22 | | 1 | SORT AGGREGATE | | 1 | 38 | | | |* 2 | TABLE ACCESS BY INDEX ROWID| BH123GH | 5059 | 187K| 1792 (1)| 00:00:22 | |* 3 | INDEX RANGE SCAN | I_BH123GH_ISABEL | 5059 | | 145 (0)| 00:00:02 | ------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 2 - filter("F123_BKJR">=0000 AND "F123_BKJR"<=2011) 3 - access("F123_FIRMA"=2 AND "SRT_REK"=2 AND "F123_KL_LEV_AR_NR"='0631001000' AND "F123_AR_NR">='4400000000' AND "F123_AR_NR"<='4404000000') filter("F123_AR_NR"<='4404000000' AND "F123_AR_NR">='4400000000') 18 rows selected. Elapsed: 00:00:00.20 SQL> SQL> rollback; Rollback complete. Elapsed: 00:00:00.01 SQL> SQL> rem Set the ARRAYSIZE according to your application SQL> set autotrace traceonly arraysize 100 SQL> SQL> alter session set tracefile_identifier = 'mytrace1'; Session altered. Elapsed: 00:00:00.01 SQL> SQL> rem if you're using bind variables SQL> rem define them here SQL> SQL> rem variable b_var1 number SQL> rem variable b_var2 varchar2(20) SQL> SQL> rem and initialize them SQL> SQL> rem exec :b_var1 := 1 SQL> rem exec :b_var2 := 'DIAG' SQL> SQL> alter session set events '10046 trace name context forever, level 8'; Session altered. Elapsed: 00:00:00.03 SQL> SQL> -- put your statement here SQL> Select nvl(sum(BM_OPENST_D - BM_OPENST_CR),0) 2 from bh.bh123gh 3 where 4 F123_AR_NR>='4400000000' and 5 F123_AR_NR<='4404000000' and 6 F123_KL_LEV_AR_NR='0631001000' and 7 SRT_REK=2 and 8 F123_BKJR>=0000 and 9 F123_BKJR<=2011 and 10 F123_FIRMA=2; Elapsed: 00:00:09.92 Execution Plan ---------------------------------------------------------- Plan hash value: 3488495774 ------------------------------------------------------------------------------------------------- | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | ------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | 38 | 1792 (1)| 00:00:22 | | 1 | SORT AGGREGATE | | 1 | 38 | | | |* 2 | TABLE ACCESS BY INDEX ROWID| BH123GH | 5059 | 187K| 1792 (1)| 00:00:22 | |* 3 | INDEX RANGE SCAN | I_BH123GH_ISABEL | 5059 | | 145 (0)| 00:00:02 | ------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 2 - filter("F123_BKJR">=0000 AND "F123_BKJR"<=2011) 3 - access("F123_FIRMA"=2 AND "SRT_REK"=2 AND "F123_KL_LEV_AR_NR"='0631001000' AND "F123_AR_NR">='4400000000' AND "F123_AR_NR"<='4404000000') filter("F123_AR_NR"<='4404000000' AND "F123_AR_NR">='4400000000') Statistics ---------------------------------------------------------- 1 recursive calls 0 db block gets 11104 consistent gets 9434 physical reads 0 redo size 574 bytes sent via SQL*Net to client 519 bytes received via SQL*Net from client 2 SQL*Net roundtrips to/from client 0 sorts (memory) 0 sorts (disk) 1 rows processed SQL> SQL> disconnect Disconnected from Oracle Database 11g Release 11.2.0.1.0 - 64bit Production SQL> SQL> spool off
DBMS_XPLAN. Output DISPLAY_CURSOR:TKPROF: Release 11.2.0.1.0 - Development on Tue Nov 22 13:58:33 2011 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. Trace file: C:\Oracle\diag\rdbms\oravopak\oravopak\trace\oravopak_ora_7352_mytrace1.trc Sort options: default ******************************************************************************** count = number of times OCI procedure was executed cpu = cpu time in seconds executing elapsed = elapsed time in seconds executing disk = number of physical reads of buffers from disk query = number of buffers gotten for consistent read current = number of buffers gotten in current mode (usually for update) rows = number of rows processed by the fetch or execute call ******************************************************************************** Select nvl(sum(BM_OPENST_D - BM_OPENST_CR),0) from bh.bh123gh where F123_AR_NR>='4400000000' and F123_AR_NR<='4404000000' and F123_KL_LEV_AR_NR='0631001000' and SRT_REK=2 and F123_BKJR>=0000 and F123_BKJR<=2011 and F123_FIRMA=2 call count cpu elapsed disk query current rows ------- ------ -------- ---------- ---------- ---------- ---------- ---------- Parse 1 0.01 0.00 0 0 0 0 Execute 1 0.00 0.00 0 0 0 0 Fetch 2 0.03 9.86 9434 11104 0 1 ------- ------ -------- ---------- ---------- ---------- ---------- ---------- total 4 0.04 9.87 9434 11104 0 1 Misses in library cache during parse: 1 Optimizer mode: ALL_ROWS Parsing user id: SYS Rows Row Source Operation ------- --------------------------------------------------- 1 SORT AGGREGATE (cr=11104 pr=9434 pw=0 time=0 us) 67250 TABLE ACCESS BY INDEX ROWID BH123GH (cr=11104 pr=9434 pw=0 time=10500177 us cost=1792 size=192242 card=5059) 67250 INDEX RANGE SCAN I_BH123GH_ISABEL (cr=526 pr=550 pw=0 time=44363 us cost=145 size=0 card=5059)(object id 75061) Elapsed times include waiting on following events: Event waited on Times Max. Wait Total Waited ---------------------------------------- Waited ---------- ------------ SQL*Net message to client 2 0.00 0.00 Disk file operations I/O 1 0.00 0.00 db file sequential read 8893 0.10 9.26 db file scattered read 7 0.01 0.05 db file parallel read 1 0.02 0.02 SQL*Net message from client 2 0.00 0.00 ********************************************************************************
SQL> SQL> select * from table(dbms_xplan.display_cursor(null, null, 'ALLSTATS LAST')); PLAN_TABLE_OUTPUT ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- SQL_ID g6pkv639sdfgw, child number 0 ------------------------------------- Select /*+ gather_plan_statistics */ nvl(sum(BM_OPENST_DEB - BM_OPENST_CR),0) from bh.bh123gh where F123_AR_NR>='4400000000' and F123_AR_NR<='4404000000' and F123_KL_LEV_AR_NR='0631001000' and SRT_REK=2 and F123_BKJR>=0000 and F123_BKJR<=2011 and F123_FIRMA=2 Plan hash value: 3488495774 -------------------------------------------------------------------------------------------------------------------- | Id | Operation | Name | Starts | E-Rows | A-Rows | A-Time | Buffers | Reads | -------------------------------------------------------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 1 | | 1 |00:00:08.07 | 11104 | 13531 | | 1 | SORT AGGREGATE | | 1 | 1 | 1 |00:00:08.07 | 11104 | 13531 | |* 2 | TABLE ACCESS BY INDEX ROWID| BH123GH | 1 | 5059 | 67250 |00:00:10.90 | 11104 | 13531 | |* 3 | INDEX RANGE SCAN | I_BH123GH_ISABEL | 1 | 5059 | 67250 |00:00:00.05 | 526 | 550 | -------------------------------------------------------------------------------------------------------------------- Predicate Information (identified by operation id): --------------------------------------------------- 2 - filter(("F123_BKJR">=0 AND "F123_BKJR"<=2011)) 3 - access("F123_FIRMA"=2 AND "SRT_REK"=2 AND "F123_KL_LEV_AR_NR"='0631001000' AND "F123_AR_NR">='4400000000' AND "F123_AR_NR"<='4404000000') filter(("F123_AR_NR"<='4404000000' AND "F123_AR_NR">='4400000000')) 27 rows selected. Elapsed: 00:00:01.15 SQL> SQL> spool off
Addition to other boards who has been submitted, a few more suggestions:
* It seems that your DB_FILE_MULTIBLOCK_READ_COUNT parameter has been manually set to a value of 6 (or you have the SESSIONS parameter set to a high value with a small CMS). As a general rule, this should only be set under Oracle database 10.2 and higher. See:
http://jonathanlewis.WordPress.com/2007/05/20/system-stats-strategy/* You have statistics of the noworkload system - it will not necessarily change things for the better for this SQL query special, but you might consider to collect statistics of the workload when the system is covered by a typical to high load. See:
http://hoopercharles.WordPress.com/2011/05/04/how-to-collect-statistics/* As Toon mentioned, single block reads dominate the running time. On average, they are quick to 0.001 seconds (1 ms), but many of them are. What is the buffer cache?
* The SQL statement uses the predicates like this WHERE clause: "F123_AR_NR > = ' F123_AR_NR «»<=", which="" i="" believe="" would="" be="" treated="" differently="" in="" cardinality="" calculations="" (2="" unbounded="" ranges)when="" compared="" to="" a="" where="" clause="" that="" uses="" between="" syntax="" (a="" single="" bounded="" range).="" the="" query="" optimizer="" will="" actually="" transform="" the="" between="" syntax="" into="" two="" unbounded="" ranges,="" but="" if="" i="" remember="" correctly,="" it="" will="" remember="" that="" the="" ranges="" are="" bounded="" when="" performing="" the="" cardinality="">=",>
* The DBMS_XPLAN. DISPLAY_CURSOR output shows that the number of blocks read from disk is 13 531 but you get only 11 104 consistent. The number of physical blocks read must be generally less number of becomes coherent. If I remember correctly, the number of readings of physical blocks can be higher if index preloading takes place, or if the intermediate results must be written for the temp tablespace. In this case, it seems that the index preloading takes place.
* It seems that because this query has been run at least 3 times in succession fast, already read of the disk blocks should remain in the buffer cache. This suggests that the buffer cache is too small. Are the BH123GH table and its indexes defined to use the buffer pool KEEP or RECYCLE, yet these buffer pools are not defined?
Charles Hooper
http://hoopercharles.WordPress.com/
IT Manager/Oracle DBA
K & M-making Machine, Inc. -
SQL * Server 2008 SP1 applied but still tries to download and install from Windows Update
I installed SQL * Server Express 2008 portable and applied the SP1 update. This shows that when we look at the programs/updates from Control Panel and management console confirms the 10.1.2531 version is running.
Whenever I use windows update service pack is listed as needing to download / install - the same KB968369 is given as a reference. I ran it a couple of times, but the update is indicated as unique every time.
Any ideas how to solve this problem?
Thank you
Colin
Try the repost in the SQL Server Setup & Upgrade forum for appropriate assistance, Colin: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads/
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I opened all the program files and not the "hidden" box, which restored the programs in the start menu.
However, when I tried to update my MS Security Essentials, I got an error message that has updated me to Windows.
When I tried to run Windows Update, I got an obscure error message.
Hi Jim,.
· What error do you get when you search for updates?
Reset Windows Update components and then try to install the updates.
How to reset the Windows Update components?
Reply with the exact error and more information, so we can help you best.
-
It took me almost an hour to get to this point. I am technologically challenged. I have an old version of Firefox. The instructions immediately embark on the 'Firefox window' but says nothing about how to access this window. Where this window? Maybe I should just download Opera?
"Firefox" means Firefox, this is the window that appears when Firefox is opened.
You must follow the directions to update to the latest version Firefox update to Firefox 33.0.2 (read to the bottom of the page to see the screenshots). This will take you to the most recent version of Firefox, and then we can help you with other problems you're having with Firefox.
If you are a beginner in Firefox, try to start with Firefox – an overview of the main features of the reading
-
When I stop I get message from windows, but cannot read it leaves the screen
When I shutdown stops, she arrives with a message from windows, but leaves the screen before you can read it
There is a place to CANCEL but you can't do anything, so he continues to stop.Hello Joan.
Have you tried the key break on your keyboard? Try and see if it helps you.
Kind regards
BearPup
-
Hi all
I recently installed VMware ESXi 3.5 U3, 123629
Before getting into the details about the problem I'll give you the specifications that you may want to know
Motherboard: Supermicro X7DB8
Processor: 2 x intel LGA771 dual core XEON 3 .2GHz
Memory: 4 GB
Storage: Adaptec Ultra320 SCSI RAID card 2020ZCR with 6 32 GB drives in a RAID 5 Configuration configuration
Network: network FULL DUPLEX 4 x 1000 MB connections (a 80003ES2LAN Ethernet controller built on the motherboard AND a 8254NXX, add in the card installed)
Everything about the installation was quick and easy. I currently have 3 virtual machines installed.
computers virtual boot very quickly. pretty much everything on ESXi performance is exceptional. In the console windows pop up when you click them in the start menu as if they were physical boxes.
BUT
the one caveat is the network performance...
I searched these forums looking for answers but have not found anything that solved the problem.
Here is what I tried, from advice in this forum...
-
I enabled HyperThreading in the VI Client and enabled HyperThreading in the BIOS
I have enabled HyperThreading in the VI Client and disabled HyperThreading in the BIOS
I've disabled HyperThreading in the VI Client and enabled HyperThreading in the BIOS
I've disabled HyperThreading in the VI Client and disabled HyperThreading in the BIOS
and I went through VMwareWolf guide as well...
When copying to or from a simple windows sharing, I can get about 5 MB a dry... that is terrible, if you consider my network hardware...
I get the slightly better performance (about 6 MB/sec) if I enable HT in the BIOS and disable in VIClient (this is what its currently set to).
During a copy operation, I saw my use of the material and on the tops of the cpu around 10%, so I don't think that its associated processor. Machines start and loading programs instantly so I doubt his performance of hard drive no more.
Before moving to ESXi I was running VMware server 2.0 on windows server 2003 R2 and the performance of the network was very fast... so I am sure, is a driver/configuration problem
Any help/Suggestions is appreciated
Thank you
Sledgezfx
Hi, I'm running into a similar problem regarding slow speed, but I've seen it happen when I copy things locally, what caught my attention, is that you get the slow speeds when the copy of a VM on another virtual computer on the same host, as someone that should not leave the vSwitch. Pls try to copy the same file from one folder to another on the same drive and tell me how fast are you...
Thank you!
-
Slower performance of the SAN storage report
Hi all
A new type of SAN storage added to the replacement of the old SAN storage environment. After presenting new data warehouses and the migration of virtual machines, users report slow performance. What might must be made to the VM file system to solve this problem... THX.
Hi Anthony
Run a block alignment which requires a restart of the VM (it may not be required on newer operating systems
If it is help full please mark this as useful or correct... Thank you
-
Hello
We are at the heart of the definition of a process for installation of 2 node to a san storage device. Oracle 11.2 on Rhel 5.
What is the process of implementation recommended for shared storage.
We want the mirroring to stay at the storage level.
* NFS without ASM
* NFS with ASM
* LUN with ASM
* LUN without ASM
All other as appropriate.
I went through the documentation, it gives options, however, does not tell best practices.
Thanks in advance everybody and apologize if there is already a post about this and I repeat it.
The only choice, I will focus on what is LUN (fiber or Infiniband fabric layer) with the ASM.
And no ASMLib. (optional, not required)
Set the devices property LUN via udev. Configure logical device for ASM using MPIO.
I'm going to call any other method, below.
-
vSAN 6.0 - Virtual by default on SAN storage policy does apply a VM show not
My VM on my datastore vSAN all show "not applicable".
The weird part is that caching SSDS still works. How will I know? Because my performance SQLIO tests indicate hundreds MB/s and my braces are only a single SAS6 Drives. No spindle drive a possible way to do this.
Now the default virtual SAN storage strategy shows also non-compliant, but I can't seem to find the cause.
Where should I look?
I'm confused... lol
Begin by restarting the profile flown by the demon of storage in vcenter.
When using the appliance, connect with ssh and run "/etc/init.d/vmware-sps restart".
(Or restart the whole camera)
-
VSAN guests can access the FC SAN storage at the same time?
Soon we will invest in new ESXi hosts and we want to design them for the ability to VSAN. But since VSAN is a fairly new technology, we also want the same hosts to act as our old guests and have warehouses of data in our SAN (FC SAN attached storage) environment.
Host VSANS have access to VSAN and FC SAN storage at the same time?
What advantages and disadvantages do you see with this design?
Yes, there is nothing to stop an ESXi participating both host a cluster VSAN, and also had access other storage taken in charge of protocols such as NFS, FC, FCoE or iSCSI.
However, you will not be able to use the LUNS or Volumes presented on NFS, FC, FCoE or iSCSI for storage VSAN.
VSAN requires local disks to build the VSAN data store.
I guess the only concern would be the additional management that comes with having many types of different storage, but this is true even if VSAN wasn't in the picture.
-
using hp p2000 with ESX 5.1 SAN storage
Hello
I need to use a SAN hp p2000 storage that is connected to a HP Dl580 G7 (with Fiber Channel) server in the form of a data archive.
the hp p2000 is not recognized in ESX
the scenario is this storage in open-suse, which is installed on the ESX like a machine.
of channel of fiber on the map server lights with the red and the Orange even when I plug the fiber cable.
storage version is ()TS240P004).
I don't don't know anything about this NOTTM I see on the web.
Please please guide me through this.
the problem is resolved by taking the final step which should be the first.
verification of physical connection.
Thank you all
-
vmkping to the loss of packets of san storage
Hello
Today, I have one of the ESXi4. Host (USB started, not any physical storage on local) have a problem.
Dtx200 (inactive) identification.
SSH for the host and try to make a vmking for SAN storage.
When I do a vmkping d
I got this:
But when I vmkping to the ISCSI SAN (DELL MD3200i) storage, I had packet loss.
I had packet losses, and I can't connect to the SAN from DELL (MD3200i) storage. I therefore had no datastorge on this host.
And I have a different ESXi4 host with a local hard drive, I don't have this problem.
Hope someone can give me help. Thank you!
Choong Leng
Have you already double check the physical connections (cables) from the host to the switch and switch port settings!
Do you use frames? If so, how you have configured the MTU size to the physical switch?
André
Maybe you are looking for
-
As I tend to use the arrows to scroll on my laptop as it is difficult to do with the mouse. I would like to be able to go to a single line of text at a time. When I updated to Firefox 10 I started to scroll 3 lines at once. So I was wondering if ther
-
My 5510 print not black like everybody else. I tried everything-new cartridges, cleaning and try to align the print heads, etc., nothing helped. It is out of warranty. Could someone send me the reset instructions "secret"? At this point, I don't c
-
How can I fix lines horizontal randomly and flicker for LCDs for my laptop Toshiba L 20
-
At that moment, the only area that is indexed is Microsoft Outlook. I have the ability to index the entire system or my drive (C :). I want to know what I should index. From what I've read so far, it is not a good idea to index everything because it
-
HP desjet 932C printer only print, or have the scanning and copying applications? I have one of these printers get second hand, by a sister